band saw vertical used for sale

: neu : ca. 4 Monate ab Auftragse : Türkei : 46700 € : 891.97 € : Doppelsäulenführung : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 750 mm : 910x750 mm : rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm : 4 kW : 0.12 kW : 4020 mm : 1600 mm : 2450 mm : 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH OPTIONS: Hydraulic vertical clamping Micro cooli ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 30900 € : 590.19 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 570x560 mm : 590 mm : 1.1 kW : 4 kW : 0.12 kW : 500 mm : 1050 mm : 2050 mm : 2242 kg NC control double column band saw 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tension inverter linear way optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch gearbox user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 12680 € : 243.46 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 350x140 mm : rund 230 mm, quadrat 200 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 830 mm : 1600 mm : 1550 mm : 1750 mm : 460 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoT ...

HEMA UH 800 YOC 1982 Motor power 4 kW Roller diameter: 800 mm max. cutting width: 780 mm Max. cutting height: 500 mm Saw blade length: 5,600 mm APA roller guide (Panhans) top + bottom Chassis incl. various Gebr. Band Saw Blades The machine was completely repainted. In addition, the machine was restored. The drive belts have also been replaced. Extraction connection: D 125 mm Dimensions: approx. 149 x 900 x 246 cm (W x D x H) Weight: 720 kg Manufacturer information

Automatic intermittent-motion stretch-banding machine for grouping and banding folding cartons with linear infeed. Machine incl. grouping unit. Output up to 40 cycles/min.

Band Knife Cutting Machine R1150 The KTK PROFI band knife is a high-performance system for precise cutting of various textile elements such as: - Fabrics - Knitwear - coated and impregnated fabrics - Insulation materials - Upholstery foam Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Edge banding machine Type: PROFIMATIC PM 2508-F Manufacturer: OTT Year: 2005 Hours: approx 300 Edge thickness: 0.220 mm Min width of the working part: 70 mm Min height of the working part: 8 mm Max height of the working part: 60 mm Min length of part: 150 mm Operating voltage: 400 V / 50 Hz Continuous speed: 1020 m/min Adhesive application: glue application cylinder with Vario Melt automatic dosing Working height: 880 mm Compressed air connection: 6 bar / 1/4 Dimensions: 8850 x 1250 x 1500 mm Weight: 4,000 kg Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

IMA COMBIMA K/II/R75/760/V/R3 edge banding machine was built in 2000 in Germany by IMA-Maschinenfabriken Klessmann GmbH. The machine is used in woodworking workshops and furniture manufacturing companies, where it is used for the precise edge-banding of components made from chipboard, MDF and laminated materials. The durable bond between the board edge and the edging contributes to the aesthetic appearance of the finished components, whilst also increasing their resistance to mechanical damage and moisture. The edge banding process begins with heating the adhesive to the correct temperature, and then applying it evenly to the edge of the board. At the same time, the edging is precisely pressed against the surface with rollers. Maintaining the correct temperature and constant pressure ensures the adhesive bonds evenly along the entire length of the component, guaranteeing a high-qualit ...

MEP Shark 282 CCS Doppelgehrungs Metallbandsäge ? Leistungsstarke Metallbandsäge für Schnitte von 45° rechts bis 60° links ? CCS (CutControlSystem) für automatischen Schnitt. (Stufenlose Regulierung des Vorschub und Abschaltung bei Schnittende) Schnittbereich RUND 0°: 250 mm Schnittbereich RUND 45° li.: 230 mm Schnittbereich RUND 60° li.: 120 mm Schnittbereich RUND 45° re.: 200 mm Schnittbereich VIERKANT 0°: 220 mm Schnittbereich VIERKANT 45° li.: 200 mm Schnittbereich VIERKANT 60° li.: 80 mm Schnittbereich VIERKANT 45° re.: 170 mm Schnittbereich FLACH 0°: 280 x 220 mm Schnittbereich FLACH 45° li.: 220 x 200 mm Schnittbereich FLACH 60° li.: 140 x 80 mm Schnittbereich FLACH 45° re.: 200 x 140 mm Geschwindigkeit: 36 / 72 m/min. Motor: 1,5 / 1,8 kW Sägeband: 2950 x 27 x 0,9 mm Gewicht: 440 kg 3x neue Sägebänder

: neu : ca. 10 Wochen ab Auftrags : Italien : 58000 € : 1096.2 € : Schwenkrahmen : 3120 x 27 x 0,9 mm : 15 - 101 m/min : 280 mm : 240 mm : 310 x 240 mm : rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm : 835 mm : 0.37 kW : 1.5 kW : 0.12 kW : 1.95 Nm : 1.95 Nm : 5150 mm : 3200 mm : 1950 mm : 5000 x 2200 x 1900 mm : 2150 kg CNC control with 7", touchscreen for the following functions: Feed length, workpiece count, and automatic saw frame rotation for frame adjustment Automatic feed 3000 mm / stroke Variable cutting pressure Machine with infinitely variable speed Coolant system Motorized chip brush Chip conveyor Automatic saw blade breakage monitoring Hydraulic vices Recommended max. diameter of solid material in automatic mode: 150 mm Operating manual in German or English OPTIONS: Hydraulic bundle clamping device, micro-spray device, varia ...

: neu : 2026 : 060214 : prompt, Zwischenverkauf v : Türkei : 7700 € : 148.61 € : 1 : Schwenkrahmen : 2730x27x0,9 mm : 35/70 m/min : 230 mm : 230 mm : 320x130 mm : rund 210 mm, quadrat 190 : rund 130 mm, quadrat 100 : rund 180 mm, quadrat 150 : 805 mm : 0.37 kW : 1.3 kW : 0.12 kW : 1350 mm : 700 mm : 1300 mm : 430 kg swivel frame infinitely adjustable lowering with hydraulic cylinder hydraulic lifting of the saw frame mechanical vice with quick clamping coolant equipment machine base chip collecting tray user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 € : 181.81 € : Schwenkrahmen : 2450x27x0,9 mm : 35/70 m/min : 220 mm : 200 mm : 250x150 mm : rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm : 0.7 kW : 1330 mm : 1300 mm : 1880 mm : 350 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent utomatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. OPTION: Adjustable vice pressure (R1) EUR 403,-- The data for this ad was created with ModulMWS - th ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 € : 160.19 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1500 mm : 1400 mm : 1850 mm : 345 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10460 € : 200.83 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm : 1600 mm : 1200 mm : 1800 mm : 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. Option: Adjustable vice pressure (R1) EUR 403,-- The data for this ad was created with ModulMWS - the softw ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 17770 € : 341.18 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 220 mm : 835 mm : 0.37 kW : 0.12 kW : 2800 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed: PLC 800 mm/stroke, CNC/Touch: 600 mm/stroke variable cutting pressure. Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices mat ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 8680 € : 167.52 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 370x140 mm : rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm : 1550 mm : 1400 mm : 1900 mm : 353 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10860 € : 208.51 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 370x140 mm : rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm : 1650 mm : 1200 mm : 1850 mm : 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10370 € : 199.1 € : Schwenkrahmen : 3120 mm : 35/70 m/min : 280 mm : 240 mm : 350x140 mm : rund 230 mm, quadrat 200 : rund 150 mm, quadrat 130 : rund 200 mm, quadrat 170 : 830 mm : 1550 mm : 1400 mm : 1750 mm : 420 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment digital readout for mitre cuts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 € : 212.54 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 420x200 mm : rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm : 1600 mm : 1400 mm : 1800 mm : 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 14110 € : 270.91 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 420x200 mm : rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm : 1600 mm : 1600 mm : 1800 mm : 488 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 9080 € : 175.24 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm : 1600 mm : 1400 mm : 1950 mm : 356 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 11640 € : 223.49 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm : 1650 mm : 1200 mm : 1900 mm : 400 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. Optional equipmente: adjustable vice pressure EUR 330,-- The data for this ad was created with ModulMWS - t ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 € : 490.49 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm : 835 mm : 0.37 kW : 0.12 kW : 3220 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 800 mm/stroke chip conveyer (CNC/Touch) variable cutting pressure Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices suggested ...

Lot 528: MEP Semi-Automatic Horizontal Band Saw Technical Details ‍ 1. Machine identification data Name: Semi-Automatic Horizontal Bandsaw Manufacturer: MEP Model: Shark 260 Year of manufacture: 2001 Machine number: 29747 37.R 2. Operational parameters Saw blade size: 2750 x 27 x 0.9 mm Cutting speeds: 2 speeds (36 & 72 RPM) Motor power (P max): 1.9 kW Operation mode: Semi-automatic with CCS (Cut Control System) Clamping: Pneumatic quick clamping Mitering capability: Yes Features: Assistant saw lowering, adjustable lowering feed rate, coolant pump in machine base Electrical connection: 400 V (3 Phase) / 50 Hz (optional 230 V) Air requirement: 6 bar 3. Weights Machine weight: 370 kg 4. Dimensions Overall machine size (Width x Length x Height): 80 x 158 x 190 cm ‍ ‍ Disclaimer: The technical specifications provided ar ...

Edge banding machine Type: AKRON 1330 A Manufacturer: Biesse Year: 2021 23 touch screen, Windows, SINTRA HD electronically controlled axes and automatic machine adjustment RT02 pre-milling unit with diamond cutters ADZ02 anti-adhesive nozzles SP03 gluing unit EVA + PUR hybrid gluing head AIR FORCE P1 – gapless edging of laser edges with hot air IT03 trimming unit with FLEX system RF02 + PRONESTING milling unit R1 / R2 / 25° multi-profile cutters AR02 cornering/rounding unit RB02 radius sander + PRONESTING R1 + R2 edge RC02 surface sander with pneumatic regulation LPT02 polishing/cleaning fluid nozzles SZ02 brushing/polishing unit additional support roller track Feed speed: 12 m/min. A great advantage of the machine is the possibility of using EVA and PUR glue, as well as the AirForce system for jointless edge banding. Machine in very good condition, fully functi ...

Edge banding machine Type: Sprint 1411 K Manufacturer: Holz-Her Year: 2005 Machine in good condition, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 26293 Hydr.- Horizontal – Two Column Guided Mitre Band Saw Machine Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, one mitre adjustment left + right with clamping - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting area - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Mitre adjustment with digital degree display - Discharge roller conveyor with dimension stop 6000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 1500 x H 1850 x D 2100 mm - Weight approx. 1500 kg

Op maat gemaakte polijstmachine voor het bewerken van bolle uiteinden met behulp van een fijne schuurband. Maximale werkstukdiameter: 6 meter Length L -- R: 5000 mm Depth Fw -- Bw: 2000 mm Height: 3800 mm

: neu : ca. 4 Monate ab Auftragse : Türkei : 21700 € : 416.64 € : Doppelsäulenführung : 4900 x 3,4 x 1,1 mm : 15 - 120 m/min : 325 mm : 320 mm : 400 x 320 mm : rund 280 mm, rechteck 240 : rund 180 mm, rechteck 180 : 650 mm : 0.55 kW : 3 kW : 0.12 kW : 2425 mm : 1050 mm : 1600 mm : 1250 kg Linear guides Sensitive cutting pressure control Bi-metal saw blade (34 mm) Coolant system Thermal overload protection Hydraulic-mechanical blade tensioning Saw blade brush Hydraulic clamping of the vise Optical height adjustment Heavy-duty gearbox Band inclined at 2° Infinitely variable cutting speed Digital display for miter angle Hydraulic locking of the miter adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

These include: - 2x Bessey belt tensioner including plastic corners. - 1x Hebor angle/miter clamp. - 1x Quick-release clamp. - 1x glue clamp. Auction-ID: A1-49374-224

Auction-ID: A1-49374-119

- Min. panel dimensions: 70 x 150 mm. - Edging material: 0.2 - 12 mm. - Throughput: 14 m/min. - Machine length: 6170 mm. - 15\" color touch screen - Beckhoff industrial PC. - Full automatic control of all units from the control screen. - Pre-milling height 65mm. - Hot melt adhesive & PU (equipped with PU glue cartridge funnel). - PU cleaning nozzles with 4 heads + brushes. - Sawing: 2 motors - 0-3° inclinable. - Face milling top and bottom. - Radius milling at the top and bottom. - Radius scraper. - Steered rounding group with 2 individually controlled 2-axle motors. - Includes PU drying box with extra glue tray transparent + white. - with flexible suction hose, without galvanized extraction ducts. - to be dismantled by the buyer, Door opening approximately 258xH300cm. Auction-ID: A1-49374-3

Transport Band z.B. für Klebebinder / Transport Belt for example for Perfect Binder Kolbus FS.L 683 Transport Band / Transport Belt Kolbus FS.L 683 Baujahr / Year 1988 - SN. 737 mit Eigensteuerung / with SelfControl Geschwindigkeit regulierbar / Speed ​​adjustable Höhenverstellbar / Height adjustable Bandlänge / Band length 150cm, Bandbreite / Band width 38cm Bandhöhe / Band high 90cm

width of the strips: 75 mm band length: 2000 mm band speed: 34 m/s total power requirement: 3,0 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: 570 x 570 x 1150 mm Features: - Sanding and support table - Hinged protective shield - Machine base - Sanding belt - Emergency stop button - Operators manual (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 34 m/s total power requirement: 3,0 kW weight of the machine ca.: 95 kg dimensions of the machine ca.: 650 x 650 x 1150 mm Features: - Sanding and support table - Flip-up protective screen - Machine base - Sanding belt - Emergency stop button - Operators manual (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In working order Auction-ID: A1-47363-92

Additional technical specifications: • adjustable angle: see pictures • max. clamping diameter: approx. 30 mm

supporting surface: approx. 130 x 50 mm

Additional technical specifications: • Cutting dimensions round: 325 mm • Square: 325 mm • Rectangle: 380 x 325 mm • Bundle cutting: 300 - 190 mm • Width and height: 140 - 70 mm • Speed: 20 - 100 m/min • Clamping pressure: 23 kg/cm² • Feed length hydraulic mode, NC automatic single stroke: 403 mm • Multiple stroke: 99 mm • Remnant piece: 50 mm • Hydraulic tensioning with automatic saw band breakage detection

• Incl. roller conveyor and roller stand • roller conveyor width: approx. 260 mm

Incl. grindstone and welding band device.

BEHRINGER HBP 340/700 G Metal Band Saw Manufacturer BEHRINGER Model HBP 340/700 G Year 1990 Condition untested Location 63843 Niedernberg DE Lot 50

BERG & SCHMID PBS 124 ESC Assembly Band Saw Manufacturer BERG & SCHMID Model PBS 124 ESC Condition untested Location 35614 Aßlar DE Lot 57

: gebraucht : 2000 : 6253 : prompt, Zwischenverkauf v : 1900 € : 1 : Schwenkrahmen : 2480 x 0,9 x 27 mm : 45 / 90 m/min : 225 mm : 180 x 245 mm : rund 100 mm, 100 x 100 mm : rund 160 mm, 160 x 160 mm : 935 mm : 1.1 kW : 1500 mm : 700 mm : 1400 mm : 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration OPTIONS: Further roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day  ...

: gebraucht : 2023 : 6242 : prompt, Zwischenverkauf v : Italien : 5400 € : 1 : Schwenkrahmen : 2450x27x0,9 mm : 35/70 m/min : 220 mm : 220 mm : 260x140 mm : rund 160 mm, quadrat 155 : rund 95 mm, quadrat 95 mm : 965 mm : 1200 mm : 1100 mm : 1860 mm : 240 kg demo machine / mint condition net price (price for new machine € 6.730,00) manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment OPTIONS: Roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Detail ...

Offer 26204 Technical data: - Inclination-adjustable working position - Sanding belt dimensions approx. 50 x 2000 mm - 2 speeds - Sanding belt fine adjustment - Contact disc diameter 250 mm - Shaft mount left 20 mm - Effective length of the shaft 35 mm - Motorized suction - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 950 x H 1750 x D 750 mm - Base frame H 520 mm - Weight approx. 200 kg

ATS-Tanner US-2000 IBL-SM-E Banding Machine ? Year of Manufacture: 2016 ATS-Tanner US-2000 IBL-SM-E banding machine (Swiss-made) featuring ultrasonic tape welding?a true all-rounder for banding a wide variety of products: from playing cards, raffle tickets, vouchers, and other printed matter to pharmaceutical package inserts and folding cartons, as well as food trays and convenience products. Technical Specifications Manufacturer: ATS-Tanner Banding Systems AG (Switzerland) Model: US-2000 IBL-SM-E Year of manufacture: 2016 Performance: Up to 30 cycles/min (depending on product and infeed) Welding system: Ultrasonic (no warm-up time, immediately ready for operation) Banding material: Paper or film tape, 30 mm tape width Arch size: 260 x 120 mm (base unit US-2000 AD) [adjust if necessary: 260 x 180 / 260 x 260 mm] Electrical connection: 200?240 V / 50?60 Hz Pneumatic connection: 6 bar Coun ...

The OR-M 510 is a high performance strapping machine perfect for high volume use from light to medium tension applications. Description Specifications: frame size B650 mm x H500 mm up to 65 strapping cycles a minute for PP () straps 9 or 12 mm wide and 0.55 mm thick, touch-panel operation automatic strap insertion, strap ejected if nothing strapped compact, can be used almost anywhere strap dispenser integrated in the machine Made in Switzerland