band saw vertical used for sale

cutting diameter: 320 mm saw band length: 3400 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 400 mm capacity 45 degrees: flat: LI 320 x 280 mm capacity 45 degrees: flat: RE 320 x 260 mm capacity 60 degrees: flat: RE 320 x 140 mm band speed: 35 + 70 m/min work height max.: 930 mm voltage: 400 V total power requirement: 2.67 kW weight: 950 + 250 kg range L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=AHgMDxAcpgE Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible ...

roll diameter: 420 mm throat: 405 mm workpiece height: 380 mm cutting speed: 16 - 2200 m/min table surface area: 615 x 615 mm saw band length: 3450/3650x6-20x0,9 mm work height max.: 955 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 470 kg dimensions of the machine ca.: 1250 x 1000 x 2100 mm From a training workshop Good condition () Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 420 mm throat: 400 mm workpiece height: 285 mm cutting speed: 15 - 1400 m/min table surface area: 500 x 500 mm saw band length: 3200-3400x6-20x0,9 mm work height max.: 955 mm voltage: 380 V total power requirement: 1.5 kW weight of the machine ca.: 470 kg dimensions of the machine ca.: 950 x 750 x 1820 mm Furnishing: - robust, vertical - band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL strip welding machine model BSO, with shears and grinding motor - swiveling table 15°/45° - Machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 320 mm throat: 310 mm workpiece height: 230 mm table-size: 505 x 505 mm cutting speed: 12 - 375 m/min turning speeds: 39 - 1230 U/min saw band length: 2460 - 2620 mm voltage: 400 V total power requirement: 1,3 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 0,80 x 0,80 x 1,65 m welding equipment: IDEAL air blow equipment: - serial-no.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: - mm throat: 1000 mm workpiece height: 350 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2 x 1 x 2 m No. 4428 Horizontal band saw SAMUR S-1000 V Cutting height 350 mm Cutting speed 20-800 mm Blade length : 4,550 mm. Blade width : 4 to 15 mm. Infinitely variable cutting speed : 23-711 m / min Elektromot r380 V Table dimensions: 610 x 610 mm Table extension left Welding device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: ? mm throat: 280 mm workpiece height: ? mm total power requirement: ? kW weight of the machine ca.: t dimensions of the machine ca.: m No. 3849 Vertical bandsaw THIEL Thiel 17 Table 500 x 590 Clearance approx. 280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 800 mm throat: 765 mm workpiece height: ? mm total power requirement: ? kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2 x 1 x 2,6 m No. 1548 Vertical band saw KÖLLE BG-80 Working area: Table, tiltable 1200 x 800 Passage saw blade machine stand 765 mm IDEAL saw blade welding and grinding device Roller diameter 800 mm. Space requirement approx. 2 x 1 x 2.6 m Weight approx. 900 kgm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mm throat: 375 mm workpiece height: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m No. 1291 Vertical band saw PEHAKA USM-4 Working range: Passage 375 Swivelling table top 600 x 600 mm, Saw blade dimensions: 2900-3040 x 3-12mm Cutting range from 3-180 m/min, Chip blowing device Ideal saw blade welding and grinding device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 450 mm saw band length: 4150 x 34 x 1.1 mm capacity 90 degrees: flat: 450 x 480 mm capacity 45 degrees: flat: LI 450 x 310 mm capacity 45 degrees: flat: RE 450 x 290 mm band speed: 35 + 70 m/min work height max.: 930 mm total power requirement: 2.35 kW voltage: 400 V weight: 950 kg range L-W-H: 2150 x 1150 x 2115 mm well-maintained condition () current new price incl. accessories ~ 50.000 Euro special price on request Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - electro-hydraulic mitre adjustment left right Only the saw frame swivels, everything else remains fixed incl. ELGO digital value display - electro-hydraulic material clamping - electro-hydraulic infeed from the saw frame Infinitely adjustable (cutting pressure control) - Operating instructions Special accessories inc ...

workpiece height: 670 mm | throat: 785 mm roll diameter: 800 mm cutting speed: 26- 2000 m/min dimensions of saw-band: 6500 mm power requirement: 11 kW table-size: 900 x 900 mm range L-W-H: 2,24 x 1,1 x 2,9 mm weight of the machine ca.: 2,3 t Machine from a university. Very good condition Equipment: - welding station - grinding stones The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kläger VBS 405 S Vertikalbandsäge / Metallbandsäge Hersteller: Kläger Typ: VBS 405 S Zustand: gebraucht, sehr gut Baujahr: 2006 Schnittbreite: 400 Tischneigung rechts/links 45°/15° Tischgröße 607 x 607 mm Sägebandbreite: 3-20 mm Sägebandlänge: 3300-3400 mm Bandgeschwindigkeit: 15 ? 300 M/min. Länge: 1120 mm Breite: 740 mm Höhe: 1930 mm Gewicht: 510kg ? Ideal Sägebandschweißgerät ? Original Dokumentation ? Maschinenfüße

Technical details Manufacturer: Global Type: Fabric cutting machine with band knife cutter Configuration: - Vertical band knife cutting unit - Large perforated air-flotation / vacuum worktable - Integrated blower motor system - Band knife motor drive - Adjustable cutting guide assembly - Emergency stop system - Industrial support frame Control panel functions: - Emergency Stop - Bandknife Motor - Blower Motor Application: - Textile cutting operations - Garment manufacturing - Upholstery production - Leather processing - Foam cutting - Technical fabric manufacturing Construction: - Heavy-duty industrial frame - Air-assisted material handling table - Precision vertical band knife cutting system Dimensions: - Length: Approx. 7000 mm - Width: Approx. 2200 mm - Height: Approx. 2200 mm Weight: Approx. 1200 kg Condition: Used Observed condition: - Blade assembl ...

Saw unit, sawing unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit cutting depth 60 mm -Saw blade: Ø 250 mm -Engine: Fimec H71SE -Power: 3 kW -Speed: 2800 rpm -Transport dimensions: 455/455/H420 mm -Weight: 27 kg

Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Saw unit, saw unit for panel saw, panel dividing saw, vertical panel sawing machine, vertical panel saw, -Saw unit, HOLZ-HER -Engine: H.Hug Type CEI PLF 850 -Power: 2.9 kW -Speed: 2880 rpm -Cutting height: max. 80 mm -Dimensions: see photos -Transport dimensions: 700/630/H780 mm -Weight: 60 kg

Controls a wide variety of pressure set points during tangential flow filtration processes when in use THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-108

Low-voltage oscillating plaster saw, specially designed for removing casts in hospitals and clinics Auction-ID: A1-49756-221

Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

Max. Timber diameter: 900 mm Max. Timber lenght: 9,0 m Saw weidt: 32 mm Electromotor: 11 KW Precuter (roundsaw), hydraulic log loaders, hydraulic log brackets, hydr. log turner, hydraulic. Leveller Fix build on tandem axle Transport speed - 80 km / h.

Volume: 1000 ltr. Material: mild steel

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

Rated power: up to 7000 kg/h Electrical connection: 3 kW 400V 50Hz (3 phases) Electrical fuse: 16 A traege Dimensions dimensions: Laenge: 4 435 mm Width: 2 250 mm Height: 2 160 mm output or drop-in height: 1 430 mm Width: 1 100 mm 320 - 870 mm Application shoehe (infinitely adjustable): 10 - 50 mm Weight: 3 400 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Band speed: 1.2 - 4.5 m/min Contact time: 1.5 - 6 min Water consumption for Cleaning: 20 l/min (in continuous operation cleaner) Connection: Connection for waste water: 75 mm Connection for juice drain: DN 40 He juice drain: 200 mm High sewage drain: 100 mm Hoehe Marce ejection: 800 mm usable for core and stone fruit Scope of delivery: high-pressure cleaner, compressor Incl. New machine - top condition

Rated power: up to 3000 kg/h Electrical connection: 3.5 kW 400V 50Hz (3 phases) Electrical fuse: 16 A traege Dimensions: Laenge: 3 720 mm Width: 1 730 mm Height: 2 110 mm output or drop-in height: 1 430 mm Width: 660 mm 220 - 440 mm Application shoehe (infinitely adjustable): 10 - 40 mm Weight: 2 200 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Band speed: 1.2 - 4.5 m/min Contact time: 1.4 - 4.2 m inWater consumption for Cleaning: 10 l/min (in continuous operation cleaner) Connection: Connection for waste water: 75 mm Connection for juice drain: DN 25 High juice drain: 130 mm Hoehe sewage drain: 50 mm Hoehe Marce ejection: 810 mm usable for core and stone fruit Supplied: high-pressure cleaner, compressor Incl. New machine - best condition

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

Saw blade diameter: 350 mm cutting capacity at 90 ° round: 90 mm cutting capacity at 90 ° square: 160 x 70 mm section in MITRE at 45 ° rectangle: 120 x 60 / 60 x 80 mm cutting speed: 30 m / min drive motor: 1.1 kW space: 1000 x 1250 x 1380 mm weight: 795 kg

Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Band dimensions: 75 x 2,000 mm speed: 14.5 / 29 m / sec. Contact plate ø x B: 200 / 80 mm plan grinding table: 460 x 75 mm suction connection Ø: 100 mm motor power output S1 100%: 2.4 / 3.0 kW absorbed motor power S6 40%: 3.0 / 4.0 of kW voltage: 400V dimensions (L x W x H): 1080 x 440 x 1000 mm weight about: 67 kg

Pester Straff-banding machine type Pewo mat 450SN Bundle Packers pester PEWO-Pack 450 SN Stretchwrapper -Modified in 2016. -Memorized (max. mm): - Insert length 300, - rack width 540, - rack 250, - seal width 450, - power: 24 cycles/min. -With shrink tunnel PEWO-therm II, passage height 130 mm, machine is with new hardware and software Mitsubishi operation via touch panel and new paint in silver offers. Infeed conveyor with Stacker in the direction of the production flow with 90 ° high thrust

Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg

High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...

Trenbandsäge Primultini 1100 with mechanization before and after the saw: -Task roller conveyor -Tilt table -Cross conveyor -Feed belt conveyor -Auszugsföderer -Drop link right -Repatriation -Board cross conveyor

Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...