band saw vertical used for sale

Stored in working condition, with 2 new band saws. Auction-ID: A3-46156-17117

Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine -Manufacturer: Ferm 7, Metal band saw -Type: BZ-175 -Drive: 0.75 kW -Cutting capacity 90°: Round 180mm, Rectangle 260x180mm -Cutting capacity 45°: Round 115mm, Rectangle 115x180mm -Saw band speed: 70-110, 150-195 m/min -Saw blade: 2360 mm -Transport dimensions: 460/1230/H990 mm -Weight: 140 kg

5.5 Kw, wheels 1000 mm diameter, Automatic star/triangle switch. Double extraction nozzle under the blade. Double PANHANS saw guide for above and below the saw table. Use of linden saws from 8 mm to 50 mm wide. With adjustable longitudinal guide and an adjustable depth guide. Maximum cutting height 336 mm. With thermal motor protection. Extra saws included Auction-ID: A1-48994-17

Technical data Manufacturer: E. Kiessling & Co., Leipzig-Plagwitz Design: Band saw in heavy cast construction Drive: Electric motor with belt drive Work table: Metallic work table Configuration Vertical band saw with large band saw wheels, height-adjustable saw blade guide and protective covers. The machine is set up on a wooden pallet. Auction-ID: A1-50026-38

Zahringer on column equipped with a material vacuum table With three 250 mm saw wheels Bottom Blade Extraction Maximum cutting height 200 mm With double-handle start protection Passage at frame and saw tape 390 mm The band saw is mounted on a heavily mounted swivel arm of 1200 mm With a range of D = 2400 mm The machine is suitable for cutting profiled purlin heads (Pfettenkopfe). 4x saw blade included 220 volt sockets in the column. Vacuum suction device Rietschle Motor 380 volt, 0.75 Kw with a suction power of 25 m3 With automatic on and off and thermal motor protection. Vacuum tank 400 x 610 x 200 mm. Auction-ID: A1-48994-32

Working parameters: Industrial machine for setting the teeth of band saw blades. Auction-ID: A1-50001-9

Machine number: 22674 Table dimensions: 780 x 740 mm incl. welding strap and whetstone Reference: Hanon - Lot 14 Auction-ID: A7-49882-271

Key data: 235 mm, 2710 mm, 1 mm

Automatic horizontal band sw machine. Included roler material feeder. Cooling system Manual shoulder moving Manual material tightening Material stopper Speed 40-80 m/min 400V/50Hz/1.45kW

90° round: 340 mm 90° rectangular: 700 x 340 mm 45° right: 400 x 340 mm 45° left: 400 x 340 mm Depth of throat: 700 mm Max height of workpiece: 340 mm Sawspeed: 17 > 120 m/min Length of band saw: 5800 x 38 x 1,3 mm Power needed: 4 kW Length : 3250 mm Depth : 1700 mm Height: 1850 mm Weight: 2300 kg

Band saw Bauer S 380 BJ 1993

Bandsaw Behringer HBF 360A BJ 1997

Band Saw Behringer HBF 430A BJ 2000

Used, functional. Including automatic roller conveyor (4000 x 1000 x 12500 mm) Including automatic chip removal (3000 x 250 x 1500 mm) Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-5

Auction-ID: A1-49968-380

Auction-ID: A1-49968-443

Auction-ID: A1-49968-444

Used, untested. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-10

Auction-ID: A1-49968-381

Used, untested. Double miter saw. Miter range: 30–135. Loading conditions: Is loaded onto the truck. Forklift and crane available. Auction-ID: A7-50094-6

Vertical Saw Viktor DCM4 BJ 1986

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-50208-216

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-50208-121

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-50065-372

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-50066-372

Cutting capacity: round 230 mm, square 230 mm, flat material 280 x 150 mm Cutting speed 15 – 110 m/min Mitre cuts left 45°/60° Automatic workpiece feed Hydraulic lowering Micro Spray System Coolant Setup Hold-down device Roller conveyor

Chip conveyor not included Auction-ID: A1-49758-33

Chip conveyor not included Auction-ID: A1-49758-34

cutting diameter: 400 mm capacity 90 degrees: flat: 500 x 400 mm saw band length: 6220 x 41 x 1.3 mm speed: 15.0 - 150 m/min work height max.: 750 mm workpiece weight: ca. 250 - 300 kg/m Control: MEBA NC coolant tank capacity: 80.0 ltr. oil volume: 30.0 ltr. power capacity: 5.5 kW weight of the machine ca.: ca. 2250 kg range L-W-H: 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic two-column linear guide system Fully automatic machine for 90° cuts only - User-friendly NC dialog control With plain-text display 5.7-inch CE panel Program memory with 50 programs, each with 20 steps - Automatic material feed Minimum cutting diameter .. Ø 5.0 mm Residual piece length without bundle clamping .. manual 25.0 mm Residual piece length without bundle clamping .. automatic 110 mm Automatic movement of the ...

Mitre cold circular saw BERG & SCHMID type MKS 350Year of construction approx. 1980Saw range at 90 Around 110 mmSaw area at 90 Rectangle 160 x 90 mmSaw area at 90 Square 95 x 95 mmSaw area at 45 Round 95 mmSaw area at 45 Rectangle 120 x 90 mmSaw area at 45 Square 80 x 80 mmSaw blade diameter max. 350 mmSaw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchableMains connection 380 volts, 50 Hz- motor with 2 electrically switchable speeds- infinitely variable

Vertical band aege KOeLLE ST105, table 950/900 mm, v= 15 - 2300 m/min - table must be overhauled - see pictures

Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted

Cutting width: 1010 mm Cutting height: 340 mm Working height: 1000 mm Table size: 600 x 500 mm Stepless cutting speed: 1st gear: 20-85 m/min 2nd gear: 120 - 500 m/min Band saw blade length: 4540 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 1.5 kW Weight, approx.: 800 kg Equipment: - Band saw blade - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light - LED speed indicator - Blow-out device -CE

Cutting width: 355 mm Cutting height: 230 mm Working height: 960 mm Table size: 500 x 400 mm Stepless cutting speed: 20 - 90 m/min Band saw blade length: 2840 mm Band saw width: 3 - 16 mm Tilting and tiltable table in 4 directions: 15° Motor power: 0.75 kW Weight, approx.: 250 kg Scope of delivery: - Band saw blade - Stepless cutting speed - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Parallel fence -CE

Cutting width: 520 mm Cutting height: 310 mm Working height: 1000 mm Cutting speed level 1: 25 - 85 m/min Cutting speed level 2: 120 - 500 m/min Cord edge: 3880 mm Saw band width: 3 - 16 mm Table size: 600 x 500 mm Table swivel range (in 4 directions): 15° Motor power: 1.5 kW Blade welding device: 2.4 kVA Machine dimensions (L x D x H): 1300 x 760 x 2140 mm Weight approx.: 500 kg Equipment: - Band saw blade - Stepless cutting speed - Reduction gearbox - Belt welding device with annealing unit - Machine light -Scissors - Grinding station - Chip brush - Blow-out device - LED digital display (to indicate the cutting speed) - Table with stop groove - Angle stop - Parallel fence

Specifications: Cutting width 500 mm Table size 800 x 820 mm Travel approx. 350 mm Cutting height under guide approx. 400 mm Belt length 4000 mm Infinitely variable speeds approx. Gearbox stage 1 15 – 80 m/min Gearbox Stage 2 75 - 305 m/min Gearbox Stage 3 207 - 944 m/min

Offer 24157 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Stepless belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - Saw blade welder IDEAL -Lighting

roll diameter: 483 mm cutting range: Vert. 508 / Hor. 457 mm Cutting length: 356 mm weight of the machine ca.: 2.3 t dimensions of the machine ca.: 3.05 x 2.05 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Inclination: 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Bsjuxvmq0O3 Saw blade speed 25-115m/min Butt welder capacity 3-16mm Engine Size: 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Circuit breaker Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welding machine, blade shears and grinding machine Nuttisch Low-voltage halogen lamp Mitre protection for oblique cuts Quick-gap stop for straight cuts

roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mm throat: 390 mm workpiece height: 240 mm saw band length: 2980 mm table surface area: 500x600 mm weight of the machine ca.: 350 kg dimensions of the machine ca.: 650x1100x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fuho Type 1408 Metal Band Saw Vertical band saw Passage width 350mm Saw blade device Motor 1kW 400V 50Hz Scissors for saw blades Table can be swivelled transversely and longitudinally Saw blade guide at the top and bottom Band length 2362mm G&2996-M40GH

V. Bandsäge, Fabr. Elektra Beckum, Type BAS 315/4 Year of Make: 1994 Projection 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Accessories: saw blades, length stop, angle adjustment for mitre cuts

Key data: 400 mm

gebr. V. Bandsäge Fabr. Bauer (with only about 50 operating hours) incl. welding device for the saw blades Saw blade rollers diameter 400 mm Saw blade length 3000 mm Table size 520 x 470 mm Dimensions: 600 x 700 x 1800 mm Weight approx. 280 kg

Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Projection/cutting width 405 mm Table size 615 x 615 mm With saw blade welder Ideal BS0/16 with band shears and whetstone Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very neat condition

roll diameter: 500 mm throat: B485/H350 mm table-size: 700x600 mm cutting speed: 15-940 m/min weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1200x800x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mössner Rekord SSF 801 Band Saw Machine The most powerful Mössner band saw, it is used when maximum performance is required. The absolute flagship among high-performance vertical band saws This machine stands for maximum precision, extremely smooth running and uncompromising durability in continuous industrial use. Basic equipment of the band saw Band saw stand in stable cast iron construction Cutting speeds adjustable via frequency converter and three-phase motor with potentiometer, 2-speed manual transmission or cutting speeds infinitely adjustable with flange bearing and frequency converter Manual belt tensioning device with hydraulic display Tiltable work table – up to 30° on the right, up to 15° on the left Replaceable aluminum wheels with hard rubber lining Upper impeller adjustable Safety door switches on the impeller doors Paintwork: RAL 7035 light g ...

cutting diameter: 320 mm saw band length: 3400 x 27 x 0.9 mm capacity 90 degrees: flat: 320 x 400 mm capacity 45 degrees: flat: LI 320 x 280 mm capacity 45 degrees: flat: RE 320 x 260 mm capacity 60 degrees: flat: RE 320 x 140 mm band speed: 35 + 70 m/min work height max.: 930 mm voltage: 400 V total power requirement: 2.67 kW weight: 950 + 250 kg range L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=AHgMDxAcpgE Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible ...

roll diameter: 420 mm throat: 405 mm workpiece height: 380 mm cutting speed: 16 - 2200 m/min table surface area: 615 x 615 mm saw band length: 3450/3650x6-20x0,9 mm work height max.: 955 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 470 kg dimensions of the machine ca.: 1250 x 1000 x 2100 mm From a training workshop Good condition () Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.