band saw vertical used for sale

cutting diameter: 290 mm saw band length: 4000 x 27 x 0,9 mm table height: -- mm cutting width: 300 mm band speed: 20 - 100 m/min load centre: 290 mm rotary disc high: 290 x 300 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 280 x 240 mm height of the workpiece: 1800 x 1900 x 1750 mm weight of the machine ca.: 2200 kg - Fully automatic electro-hydraulic band saw - electric feed unit - max. feed 520 mm - front control panel - electro-hydraulic material clamping - semi-automatic & automatic mode selectable - Miter cuts - Automatic operation up to 45° right - Miter cuts - Semi-automatic operation up to 60° right - stepless adjustment of the saw blade speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 500 mm throat: 1050 / 485 mm workpiece height: 300 mm saw band length: 3920 - 4050 mm cutting speed: 15 - 940 m/min table height: 1040 mm table surface area: 750 x 800 mm Table tiltable: 15 Grad total power requirement: 4,0 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made  ...

cutting diameter: 305 mm saw band length: 3375 mm cutting width: 350 mm dimensions of saw-band: 3375 x 27 x 0,9 mm : 305 mm : 260 mm : 350 x 200 mm : 250 mm : 230 mm : 230 x 200 mm : 175 mm : 155 mm : 170 x 100 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 1,8 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band Saw Jäspa comfort 420 A-M BJ 2014

BEHRINGER HBP 340 G ist eine Bandsäge für Präzision, hohe Genauigkeit und Zuverlässigkeit. Schnittbereich: rund bis 340 mm; vierkant 340×340 mm; Tischneigung ±45°. Daten: Band 4860 mm×32 mm×1 mm; Geschwindigkeit 15–100 m/min (stufenlos); Anschluss 3×400 V 50 Hz; Abmessungen L3100×B1100×H1700 mm. Zubehör: hydraulischer Schraubstock, Kühleinrichtung, Späneförderer. Erreicht enge Toleranzen; ideal für Automotive, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

KASTO SSB 260 VA ist eine Bandsäge für Präzision, hohe Genauigkeit und Zuverlässigkeit. Schnittbereich rund 10-260 mm, vierkant 260×260 mm; Schnittlänge 5-680 mm; Vorschublänge 680 mm; Bandgeschw. 15-125 m/min; Band 4115×41×1 mm. Anschluss 3×380 V 50 Hz; Leistung 4/6,5 kW; Gewicht ~1915 kg; Maße L2125×B1930×H2100 mm. Zubehör: automatischer Vorschub, Materialauflage 1 m, Rollenbahn, Kühlung, Späneförderer. Erreicht enge Toleranzen; Branchen: Automotive, Maschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

BTM 320 - 420A/CNC ist eine Bandsäge für hochpräzise, sehr genaue und zuverlässige Schnitte. Kapazität: Rund- und Vierkantschnitt bis 410 mm; Schnittgeschwindigkeit stufenlos 10–100 m/min; Tischneigung rechts 60°. Technische Daten: Bandrollendurchm. 450 mm; Bandlänge 5300 mm; Bandbreite 34 mm; Banddicke 1 mm; Schraubstockdruck 3–25 bar; Anschluss 50 Hz 3x380 V; Antriebsleistung 2 kW; Gewicht ~2300 kg; Abmessungen L3250×B1910×H2100 mm. Geeignet für enge Toleranzen; Anwendung u.a. Automotive, Werkzeugbau, Luftfahrt, Medizintechnik, Uhrenbau. Technische Daten ohne Gewähr

KASTO SSB 260 VA ist eine Bandsäge, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Schnittbereich: rund/quadratisch bis 260 mm; Durchmesser min. 10 mm; Schnittlänge 5–600 mm; Reststück min. 10 mm. Technische Daten: Bandlänge 4115 mm, Bandbreite 41 mm, Bandstärke 1 mm; Bandgeschwindigkeit stufenlos 15–125 m/min; Sägemotor 4 kW; Leistung 8 kW; Anschluss 3x380 V 50 Hz; Gewicht ca. 2200 kg; Abmessungen L2400×B1600×H2500 mm. Zubehör: automatischer Vorschub, Eingangsauflage 1 m, Rollenbahn, Kühlmitteleinrichtung, Späneförderer. Erreicht enge Toleranzen; Einsatz in Automotive, Präzisionsmechanik, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

TRENNJAEGER TEBA240CF-NC ist eine Bandsäge für hohe Präzision, Genauigkeit und Zuverlässigkeit. Schnitt Ø/Quadrat/Flach bis 240 mm; Schnittgeschwindigkeit 30–90 m/min. Bandrolle Ø300 mm; Band 2170×27×1 mm. Anschluss 3x400 V 50 Hz, 2,8 kW; Gewicht ~750 kg; Maße 2100×1500×1450 mm. Ausstattung: Satz Sägebänder, Rollenbahn, Kühlmitteleinrichtung 25 l. Erreicht enge Toleranzen; geeignet für Automotive, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

BIANCO 370 SA ist eine Halbautomatische Bandsäge, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Schnittbereiche: rund bis 280 mm; vierkant 240 mm; flach 370×140 mm; bei 45°: rund 225 mm, vierkant 215 mm, flach 230×140 mm; bei 60°: rund 140 mm, vierkant 140 mm, flach 140×130 mm. Technische Daten: stufenlos 35–70 m/min; Bandlänge 3120 mm; Bandbreite 27 mm; Banddicke 1 mm; Antriebsleistung 2 kW; Gewicht ~465 kg; Abmessungen 1500×1400×1500 mm. Zubehör: hydraulischer Schraubstock, Satz Sägebänder, Materialanschlag. Erreicht enge Toleranzen; geeignet für Automobil, Uhrenbau, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

FORTE FORTEMAT SBA 241 ist eine Bandsäge mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Kapazität: rund/quad bis 250 mm; Schnittlänge 3 mm–2×400 mm; Geschwindigkeit 14–116 m/min; Rolle 460 mm; Band 4100 mm. Daten: 3×380 V 50 Hz; 4,00 kW; Gewicht ~1500 kg; Abmessungen L1700×B1500×H1350 mm. Zubehör: automatischer Vorschub, Rollenbahn, Kühlmitteleinrichtung. Geeignet für enge Toleranzen in Automotive, Maschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

FORTE FORTEMAT SBA 241 ist eine Bandsäge mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Schnitt: Rund/Vierkant Ø250 mm; Länge 3 mm–2×400 mm. Daten: 14–116 m/min stufenlos, Bandrolle Ø460 mm, Band 4100 mm, 4 kW, Anschluss 50 Hz 3x (Volt), Gewicht ~1600 kg, L1700×B1500×H1600 mm. Ausführung: horizontal, hydraulisch, automatisch. Zubehör: automatischer Vorschub, Kühlmittel. Ermöglicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Maschinenbau. Technische Daten ohne Gewähr

MEP SHARK 281 SXI EVO ist eine Bandsäge für präzise Bearbeitung, mit hoher Genauigkeit und Zuverlässigkeit. Schnittbereich: Rund 250 mm, Vierkant 230 mm, Flach 280x200 mm (45°: 190/180/180x180; 60°: 120/110/110x110). Schnittgeschw. 36–72 m/min; Band 2950x27 mm (Dicke 0.9 mm); Spannstocköffnung 285 mm; Sägemotor 1.8 kW; 3x400V 50Hz; Gewicht 435 kg; Abmessungen 2000x1000x1840 mm; Kühlmitteleinrichtung 13 l. Geeignet für enge Toleranzen in Automotive, Feinmechanik, Luftfahrt und Medizintechnik Technische Daten ohne Gewähr

Bekamak BMSY-440DGH Depth of throat: 610 mm Max height of workpiece: 440 mm Sawspeed: 15 > 120 m/min Length of band saw: 5200 x 34 x 1,1 mm Power needed: 3 kW Length : 2800 mm Depth : 1210 mm Height: 1870 mm Weight: 1540 kg

cutting diameter: 300 mm saw band length: 3900 mm total power requirement: 3 kW weight of the machine ca.: 0,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 600mm, working height: 955mm, max. cutting height: 140mm, clearance height: approx. 5mm-300mm, clearance width: max. approx. 650mm, max. saw blade length: 5600mm, saw blade width: 8mm-25mm, max. saw blade thickness: 0.65mm, max. band speed: 1640m/min, conveyor belt speed: 0,5m/min - 5m/min, conveyor belt width: 650mm. Overall length with conveyor belt: 2820mm, overall width: 2550mm, overall height: 1800mm, machine weight: approx. 700kg. Documentation available. Inspection possible by arrangement.

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960 ...

cutting diameter: 305 mm saw band length: 3370 mm cutting width: 350 mm dimensions of saw-band: 3370 x 27 x 0,9 mm : 305 mm : 260 mm : 350 x 200 mm : 250 mm : 230 mm : 230 x 200 mm : 175 mm : 155 mm : 170 x 100 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1700 x 1500 x 1950 mm Features: - Semi-automatic operation via automatic saw frame lowering - Miters: left 60°, right 45° - 2 speeds: 40 and 80 m/min - Solid material support table - Operatorâs manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIE) - With miter cuts from 45° right to 60° left Mitre adjustment via a large turntable - MEP EVO microprocessor control for managing all functions Front right, swiveling - Optional manual or automatic lowering of the saw frame Stepless adjustment of the saw frame lo ...

Wood Band Saw Holzkraft HBS 840 AS Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-49495-372

cutting diameter: 290 mm capacity 90 degrees: flat: 320 x 290 mm capacity 45 degrees: flat: re 240 x 150 mm capacity 45 degrees: round: re 240 mm capacity 60 degrees: flat: re 150 x 180 mm capacity 60 degrees: round: re 150 mm capacity 45 degrees: flat: li 240 x 100 mm capacity 45 degrees: round: li 240 mm turning speed range:: 20 - 100 m/min saw band length: 3100 x 27 x 0.9 mm power capacity: 2.4 kW weight of the machine ca.: 570 kg range L-W-H: 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model F) - Ergonomic control panel - Micro-spray lubricati ...

cutting diameter: 300 mm capacity 90 degrees: flat: 320 x 290 mm capacity 45 degrees: flat: re 300 x 280 mm capacity 45 degrees: round: re 300 mm capacity 60 degrees: flat: re 190 x 200 mm capacity 60 degrees: round: re 200 mm capacity 45 degrees: flat: li 270 x 200 mm capacity 45 degrees: round: li 270 mm turning speed range:: 20 - 100 m/min saw band length: 3660 x 27 x 0.9 mm power capacity: 2.4 kW weight of the machine ca.: 650 kg range L-W-H: 2050 x 1170 x 1600 mm Current list price: approx. 15.000 euros Special price available upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron turntable For miter cuts from 45° left to 60° right - Hydraulic feed mechanism Material clamping - Ergonomic control panelâfront right, swiveling - Coolant system - Operatorati ...

cutting diameter: Ø 255 mm capacity 90 degrees: square: 230 mm capacity 90 degrees: flat: 300 x 180 mm dimensions of saw-band: 2765 x 27 x 0,9 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: square: 190 mm capacity 45 degrees: flat: 200 x 160 mm capacity 60 degrees: round: 135 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 130 x 100 mm cutting speed: 18- 110 m/min power requirement: 1,5/ 1,8 kW dimensions: 1,7 x 1,95 x 1,83 m weight of the machine ca.: 0,8 t full automatic one side miter bandsaw NC- controlled - miter cut left 45° full automatic mode - miter cut left 60 half automatic mode - CNC- controll for 10 saw programms and 99 subroutine - automatic lenght movement with ballscrew - roller conveyor feed side - stepless cutting speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Behringer HBP 263 AG Metallbandsäge Vollautomat (2008) Hersteller: Behringer Typ: HBP 263 AG Metallbandsäge Vollautomat Baujahr: 2008

Metal Band Saw OPTIMUM - OPTIsaw S 275 PV Stock number: 1039-9445 Technical details Cutting diameter max. 225 mm Saw blade length 2,480 mm Saw blade width 27 mm Saw blade dimensions 2,480 x 27 x 0.9 mm Cutting angle 0 - 60 ° Belt speed 20 - 90 m/min Cutting range at 90° max. 225 mm Cutting range at 90 degrees: square 190 mm Cutting area at 90 degrees: flat 150 x 245 mm Cutting range at 60 degrees: around 90 mm Cutting range at 60 degrees: square 90 mm Cutting area at 60 degrees: flat 120 x 90 mm Cutting range at 45 degrees: around 145 mm Cutting range at 45 degrees: square 150 mm Cutting area at 45 degrees: flat 190 x 150 mm Total power requirement 1.5 kW Accessories Documentation Saw blades 1x Coolant Setup Auction-ID: A7-49608-22

cutting diameter: 15 - 300 mm saw band length: 4640 mm cutting width: 1,3 mm cutting range - square -: 300 x 300 mm feed length: 600 mm feed length: multiple: 5400 mm dimensions of saw-band: 4640 x 41 x 1,3 mm cutting speed: 19 - 130 m/min min. cut-off length: 10 mm height of material-table: 700 mm total power requirement: 7 kW weight of the machine ca.: 2,7 t dimensions of machine L x W x H: 2,35 x 2,34 x 1,95 m Accessories: chip conveyor, DRO for cutting length, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEBA Mebamat 434 Metallbandsägeautomat Hersteller: Meba Typ: Mebamat 434 Baujahr 2013 Zustand: gut, gebraucht Einschaltstunden: 14.800h Sägestunden: 5682h Ausführung NC-Automat Motor 7,5 kW Sägeband 6220 x 41 x 1,3 mm Bandgeschwindigkeit 15 ? 150 m/min. Max. Materialdurchlass Ø 430 / 430 x 430 Kleinster Ø 5 mm Abmessungen (L x B x H) 1700 x 3100 x 2350 mm Arbeitshöhe 750 mm Gewicht 4100 kg Nullanschlag Kratzspäneförderer Minimalmengenschmierung Automatische Materialhöhen- und Breitenerkennung Rollenbahn 300cm 8x neue Ersatzsägebänder

Kaltenbach KBS 400 NA Metallbandsäge Automat (2020) Hersteller: Kaltenbach Typ: KBS 400 NA Baujahr: 2020 Zustand: gebraucht, sehr gut, unter Strom Sägeband (mm) 5.730 x 41 x 1,3 mm Motorleistung (kW) 4 Schnittgeschwindigkeit (mm/min) 15-90 Sägeblattvorschub (m/min) 0-300 Schwenkbereich 115° Rund 90° 350 mm Rund 45° 350 mm Vierkant 90° 400×;350 mm Vierkant 45° 315×;350 mm Arbeitshöhe 720 mm Gewicht 3600 Kg CNC-gesteuerte Schnittwinkeleinstellung Separat angetriebene Spänebürste Automatischer Materialnachschubgreifer mit Hublänge 2.600 mm im Einfachhub Hydraulische Bandspannung Elektronische Sägeband-Schlupfüberwachung

CONTROLS   CNC controls KASTO TECHNICAL SPECIFICATION   max. cutting height: 430 mm   sawband length: 6830 mm   sawband width: 1.3 mm   chucking capacity min: 6 mm   clamping diameter max.: 430 mm ELECTRICAL SPECIFICATIONS   total power consumption: 22 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2200 mm   space requirements -front/back-: 4750 mm   total height: 2602 mm   total weight approx.: 4500 kg Precision, hydraulic, high-performance, with roller conveyor Ausstattung: Rollenbahn mit Quertransport am Eingang der Anlage und Förderband mit Abschiebetisch am Ausgang der Anlage

Macc Special 391 A Depth of throat: 320 mm Max height of workpiece: 300 mm Sawspeed: 38 > 77 mm/min Length of band saw: 3200 x 27 x 0,9 mm Length : 3385 mm Depth : 2045 mm Height: 1820 mm Weight: 960 kg

Machine number: 831097 Blade length: 5600 mm Table dimensions: 900 x 900 mm incl. lot of saw blades Auction-ID: A7-49089-524

Machine number: 1042455 Cutting length: approx. 3000 mm incl. right roller conveyor Roller conveyor length: approx. 2000 mm Roller conveyor width: approx. 350 mm Roller conveyor left Length: approx. 3000 mm and width: 350 mm Auction-ID: A7-49089-156

Sheet length: 5600 mm Machine number: 83509 Table dimensions: 900 x 900 mm Auction-ID: A7-49089-177

KASTO KASTOtwin A2 automatic band saw with roller conveyors KASTO KASTOtwin A2 automatic band saw, equipped with roller conveyors and an automatic feeding system for cutting metal profiles, tubes and bars. The KASTO brand is recognized in the field of industrial sawing for its robustness, precision and reliability in production. This machine enables automated material flow with excellent repeatability, making it an ideal solution for: Mechanical workshops Metal constructions locksmith Boilermaking Throughput Centers Industrial maintenance Mass production The conveyor + machine assembly constitutes a complete industrial sawing plant. Auction-ID: A1-48554-230

Used machine Machine Plate Erasers Year about 2005 Data Sheet: SR 900 Model Steering wheel diameter: 900 mm (36\") Dimensions of the cast iron worktop: 810 x 1205 mm Cutting capacity (Height x Width): 450 x 840 mm Steering wheel width: 50 mm Steering wheel rotation speed: 700 rpm Blade length: 6230 mm Engine power: 7.5 HP / kW Auction-ID: A1-49230-3

Roll diameter: 300 mm Throat depth: 450–500 mm Max. workpiece height: 220 mm Table size: 600 × 600 mm Table swivel: yes, partly in 2 directions Saw blade length: 3350 mm Saw band width: approx. 10 mm Belt speed: 15 – 125 m/min or 125 – 1000 m/min partially. infinitely variable Weight: approx. 700 kg Dimensions: 1000 × 700 × 1800 mm Equipment: -Integrated belt welding machine (IDEAL BS00) -Sharpening stone for deburring the weld seam -Stepless speed control

cutting diameter: 360 mm saw band length: 4870 x 41 x 1,3 mm cutting width: 360 mm cutting speed: 11 - 110 m/min : 4,0 kW height of the workpiece: 800 mm weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,3 x 1,9 x 2,2 m Automatic hydraulic band saw with - SIMATIC OP17 NC control - Single material feed 600 mm - Max. programmable length 6000 mm - Hydraulic saw blade tensioning (36–40 bar) - Motorized chip conveyor - Emergency stop device - infeed roller conveyor 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 335 mm capacity 90 degrees: flat: 500 x 335 mm saw band length: 4400 x 34 x 1.1 mm speed: 15.0 - 150 m/min work height max.: 750 mm workpiece weight: 250 kg/m coolant tank capacity: 80.0 ltr. oil volume: 30.0 ltr. power capacity: 5.5 kW weight of the machine ca.: 1800 kg range L-W-H: 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon request Features: - MEBA - Fully automatic two-column linear guide system Fully automatic machine for 90° cuts only - Automatic material feed - Continuously variable lowering speed 0â300 mm/min - Band saw speed controlled by frequency-regulated AC drive (15â150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping blocks - Operatorâs manual The data for this ad was created with ModulMWS - the software solution ...

length of supply lane 6 meters and measuring track 9 meters; double-sided miter Auction-ID: A1-49836-17

Total 5 pieces ; Dimensions: 4640 x 34 x1.10mm ; TYPE: M42 No. 529 ; unused ; see photos for more details Auction-ID: A7-49942-369

Total 2 pieces ; Blade height: 54 ; Blade thickness: 1.3 ; Gearing: 4/6 ; Length: 7050mm ; Type: SANDFLEX COBRA ; unused ; see photos for more details Auction-ID: A7-49942-377

incl. several new saw blades Auction-ID: A1-49926-19

Total 2 pieces ; Blade height: 41 ; Blade thickness: 1.3 ; Gearing: 3/4 ; Length: 5600mm ; Type: SANDFLEX COBRA ; unused ; see photos for more details Auction-ID: A7-49942-374

Total 2 pieces ; Blade height: 54 ; Blade thickness: 1.3 ; Gearing: 4/6 ; Length: 7050mm ; Type: SANDFLEX COBRA ; unused ; see photos for more details Auction-ID: A7-49942-376

Total 2 pieces ; Blade height: 41 ; Blade thickness: 1.3 ; Gearing: 3/4 ; Length: 5600mm ; Type: SANDFLEX COBRA ; unused ; see photos for more details Auction-ID: A7-49942-375

Auction-ID: A1-49836-44

Total 5 pieces ; Dimensions: 4640 x 34 x1.10mm ; TYPE: M42 No. 529 ; unused ; see photos for more details Auction-ID: A7-49942-368