band saw machine used for sale

specifications: - Roll diameter 420 mm - Projection 410 mm - maximum passage height 265 mm - Table size 600 x 600 mm - Table li. + re. swivel each 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 3150 - 3260 mm - Sawing bandwidth 3 - 16 mm - 8 Cutting speeds approx. 18 - 562 m/min - Drive 400 V / 1.1 / 1.7 kW - Weight approx. 650 kg - Space required approx. W 900 x H 1900 x D 1000 mm - E. foot button

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

Auction-ID: A1-45188-154

Sawing capacity: 280 mm round / 330 mm square Sawing capacity 45º: 250 mm round / 250 mm square Sawing speed: 40/80 mtr.min. Band saw blade: 3,320 x 27 x 0.9 mm Saw angle: 0 - 60º Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

with 2 pcs. roller conveyor Auction-ID: A7-45452-19

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

MAX TRUNK DIAMETER 1200 MM - CUTTING LENGTH 7800 MM - 11 KW/15 HP ENGINE - PRE-CUTTING AGGREGATE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 400 V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - horizontal / vertical cutting head spacing in one cut - 1150/280 mm - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,800 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 1200 by turning

MAX TRUNK DIAMETER 850 MM - CUTTING LENGTH 7800 MM - 7.5 KW/ 10 HP ENGINE - AUTOMATIC FEED FOR SAWING UNIT - POSITIONING CONTROLLER ISP 010 - Supply voltage - 380V, 50Hz - Vertical chain stroke up / from 30 mm / 1s with gear motor - Longitudinal feed of the cutting head - Liquid inverter 0-40 running meters / min - maximum dimension of the cut Logs up to 1200 mm - Saw blade width - 32-35 mm - Saw blade length - 4,010 mm - Cutting thickness -1.5-2.5 mm - Diameter impellers - 475 mm - Substructure made of closed 120 x 120 x 5 mm profile - Columns supporting the wood were made of a profile of 80 mm x 160 mm x 4 mm - Diameter of the processing log up to 850 by turning

With saw band welding device

machine ready for transport and to be assessed on viewing day. damage to electrical cabinet / driver

Bundle clamping device manual

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics

• Description: Good properties for profile cuts • Stop: 2000 mm • Power: 400V 2.7 A • Dimensions: 3050 x 1550 x 2000 mm • Weight: 2800 kg • Operational since: 6.5.1992 • Accessories: 2000 mm stop

Behringer HBP 320 Depth of throat: 320 mm Sawspeed: 16 > 100 m/min Length of band saw: 4860 x 32 x 1,1 mm Power needed: 3 kW Length : 2500 mm Depth : 2400 mm Height: 1600 mm Weight: 2400 kg

Behringer HBP 400 Depth of throat: 400 mm Max height of workpiece: 400 mm Length of band saw: 5800 x 38 x 1,3 mm Power needed: 5 kW Length : 2900 mm Depth : 2500 mm Height: 2100 mm Weight: 2,7 ton

cap round: dia 260 mm cap square: 260 x 260 mm Depth of throat: 260 mm Max height of workpiece: 260 mm Sawspeed: 17 > 120 m/min Length of band saw: 4100 x 32 x 1,1 mm Power needed: 5 kW Length : 2300 mm Depth : 2300 mm Height: 1400 mm Weight: 2 ton

Optimum Opti S 275 G Max height of workpiece: 225 mm Sawspeed: 45 > 90 m/min Length of band saw: 2480 x 27 x 0,9 mm Power needed: 1,1 kW Length : 1360 mm Depth : 510 mm Height: 1690 mm Weight: 200 kg

Semi automatic bandsaw Depth of throat: 500 Max height of workpiece: 335 mm Sawspeed: 15 - 150 m/min Length of band saw: 4400 x 34 x 1,1 mm Power needed: 3 kW Length : 1250 mm Depth : 2200 mm Height: 1900 mm Weight: 1 ton

Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm

Full automatic bandsaw with bundle clamp and autofeed CNC controlled angle positioning workpiece width in bundle clamping: 0-300 mm workpiece height in bundle clamping: 5-300 mm single material feed length: 0-600 mm repeated material feed length: 0-9999 mm maximum cutting capacity (90°, round): 325 mm maximum cutting capacity (90°, rectangle): 500 x 300 mm right mitre cut (45°, round): 300 mm right mitre cut (45°, rectangle): 300 x 300 mm right mitre cut (30°, round): 200 mm right mitre cut (30°, rectangle): 200 x 200 mm left mitre cut (45°, round): 300 mm left mitre cut (45°, rectangle): 300 x 300 mm Depth of throat: 500 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4400 x 34 x 1.1 mm Length : 2680 mm Depth : 2350 mm Height: 1350 mm Weight: 1800 kg

Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs

in excellent condition Horizontal band saw machine AMADA CRH-300S manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed ​​27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m

Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod

Kasto Twin U 4 Depth of throat: 400 mm Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Power needed: 6 kW

Opus 550 TF Table dimensions: 600 x 760 mm Depth of throat: 550 mm Max height of workpiece: 430 mm Sawspeed: 120x1200 m/min Length of band saw: 4700 x 27 mm Power needed: 4.2 kW Weight: 900 kg

Sell different machines in a package at a low price - MEIKO FV 40T dishwasher only ran a few times, it's virtually new - MAINCA SM-182, built in 1999, bone band saw almost new, not much used either - MAJA ESB 441, built in 1991, belt detractor runs smoothly - RÜHLE Tumbler - Suspension trolley In addition, a FREY filling machine with a new circuit board would also be available. All machines are a bit older, but in a very neat and good technical condition. If you have any questions or take more photos, please just get in touch.

Part number 7803 SPECIFICATIONS - track length 10000mm - max thickness (piles) of the processed raw material 800mm - motor power 12kW -brake - feeder feed smoothly controlled, inverter - Thrust arm assembly 5pcs - Log clamps (fender stanchions) 1pc - saw length 4818mm - saw width 32-38mm - saw blade thickness 1.1mm -wheel diameter 600mm - Cooling of saws - emergency disconnection - with self-loading feeder - machine dimensions l/w/h 10000x2250x2600mm - weight approx. 1700kg ADVANTAGES – smooth feed on the inverter – electrically adjustable cutting thickness – automatic programming of cutting thickness Selbit ISP-010 – original DTR + CE documentation – used sawmill, very good condition, unpainted Net price: 33900 PLN Net price: 8071 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-110

machine ready for transport and to be assessed on viewing day. damage to electrical cabinet / driver Auction-ID: A1-44905-107

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, metal band saw machine -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x 150 mm -Cutting data square: 150 mm -Saw blade speed: continuously adjustable, 20 - 195 m/min -Saw band: approx. 3700 mm -Coolant system -Dimensions: 1800/940/H1310 mm -Weight: 528 kg

Auction-ID: A7-45452-55

Auction-ID: A7-45452-18

Cutting diameter 90°: Ø 305 mm Cutting range at 90 degrees: square: 360x305 mm Cutting range at 45 degrees: round: Ø 265 mm Cutting range at 45 degrees: flat: 265x305 mm Cutting range at 60 degrees: round: Ø 175 mm Cutting range at 60 degrees: flat: 175x305 mm Table height: 700 mm Saw blade dimensions : 3830x27x0.9 mm Belt speed: 16-100 m/min Dimensions LxWxH: 2300 x 1450 x 1650 mm Total power requirement: 380 V , 1.1 kW Machine weight approx.: 780 kg Cut area at 90° cow: Ø 305 mm Cut area at 90° weight: 360 x 305 mm Cut area in area at 45° round: Ø 265 mm Cut area in width at 45° angle: 265 x 305 mm Cut area in width at 60° cow: Ø 175 mm Cut area in width at 60° angle: 175 x 305 mm Rubber bands: 3830 x 27 x 0.9 mm Sägebandgeschwindigkeit: 16 - 100 m/min Spaces: 2300 x 1450 x 1650 mm Sägeantrieb: 380 V, 1.1 kW Weight ±: 780 kg Auction-ID: A1-41992-93

With saw band welding device Auction-ID: A1-45711-154

Serial Number: 44650046 Blade length: 4570 mm Cutting Capacity: Round material: ⌀ 406 mm Square Material: Width: 400 mm Height: 400 mm Max. loading capacity: Machine: 2500 kg Roller conveyor: 2000 kg/m Min. workpiece remaining length to ensure the clamping edge of 10 mm: 76 mm Min. workpiece residual length for no workpiece detection: 30 mm Saw blade dimensions: 41 x 1.3 x 4570 mm Velocities: 15 to 90 m per minute (50 Hz) 17 to 90 m per minute (60 Hz) Section length: 10 - 5040 mm (possible in steps of 0.1 mm) Single feed: 570 mm With technical documentation as shown in the pictures With additional roller conveyor Support length: approx. 2000 mm Total support length: approx. 5040 mm Auction-ID: A7-45758-40

maximum cutting diameter: ø 250, arm lifting: Manual, arm lowering: Smooth feed (actuator), band dimensions: 2910 x 27 x 0.9 mm, band speed: 2 speeds (40 / 80 m/min), angled cutting: right 0° - 45° - 60°, vise: manual, quick-clamping (eccentric) Auction-ID: A7-45896-4

Serial Number: 44650046 Blade length: 4570 mm Cutting Capacity: Round material: ⌀ 406 mm Square Material: Width: 400 mm Height: 400 mm Max. loading capacity: Machine: 2500 kg Roller conveyor: 2000 kg/m Min. workpiece remaining length to ensure the clamping edge of 10 mm: 76 mm Min. workpiece residual length for no workpiece detection: 30 mm Saw blade dimensions: 41 x 1.3 x 4570 mm Velocities: 15 to 90 m per minute (50 Hz) 17 to 90 m per minute (60 Hz) Section length: 10 - 5040 mm (possible in steps of 0.1 mm) Single feed: 570 mm With technical documentation as shown in the pictures With additional roller conveyor Support length: approx. 2000 mm Total support length: approx. 5040 mm

Technical data: Machine stand, Type 539 Band saw roll diameter 1400 mm Band saw roll width 180 mm Saw blade width max. 200 mm Saw blade length max. 9300 mm Saw blade thickness 1.3 mm Saw blade speed approx. 42 m/sec. Drive power 45 kW, (1500rpm) Cutting feed requires. 22.5 m/min -Incl. electrical equipment, consisting of limit switches for saw blade voltage, path limitation for transverse movement -2 electromechanical width adjustment devices with precision spindle and two-stage special drive - designed for connecting a Fraba digitizer 2800 -2 hydro-pneumatic band saw roller brakes

N E U M A S C H I N E! OUR MOST SOLD! Bandsaw HBS 470 400V 3 HP S 1 Cutting height of 290 mm 465 Mm cutting width 475mm solid wheels Precision roller guides 3454mm band length Work plate, swiveling Weight: ca. 180 kg G & HM-HBS470 SPECIAL PRICE NET OF 999.-

N E U M A S C H I N E! Bandsaw HBS 473 400V 3 HP S 1 Cutting height of 290 mm 465 mm cutting width 475mm solid wheels 3 rolls of precision roller bearings 3454mm band length Work plate, swiveling Weight: ca. 180 kg SPECIAL PRICE NET OF 950.-

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

Wheel diameter: 600 mm Cutting height: 380 mm cutting width: 570 mm Motor output: 2,2 kW Table dimensions: 810 x 590 mm table height: 905 mm voltage: 400 V / 50 Hz range L-W-H: 1120 x 750 x 2125 mm Weight: 275 kg Dust suction hood: 2 x 100 mm band speed: 1550 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.