band saw for used for sale

Cutting area round: 250 mm Cutting area rectangular: 250 mm Saw band dimensions: 3660 x 25 x 0.9 mm Band speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg

Offer 23148 Specifications: - With hydraulic clamping and feeding device - Cutting area approx. 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Band saw dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

cutting diameter: 250 mm saw band length: 3660 mm cutting width: 1,3 mm clamping range: Länge 450 mm clamping range: Höhe 250 mm cutting speed: 20 - 70 m/min cutting capacity: stufenlos mitter cutting - all-position: 45 ° voltage: 380 V frequency: 50 Hz power capacity: 0,55 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 1,0 x 1,6 m coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Log band saw Pilous CTR750EV, very good condition, 5.5 kW, S6 7.5 kW, 3.6 m cutting length, 460 kgPrices subject to change, errors, printing and typesetting errors excepted

Hydraulic log band saw Forestor CTR800H incl. the following accessories:3m extension section, chain log turner, log lifter hydr. rotatable, stem lifter hydr. with drive, saw blade tensioning device, 11 kW motor, pre-cutting device, ammeter, saw blade guide electrically adjustable, LG automatic, irrigation pump with automatic switch-onPrices subject to change, errors, printing and typesetting errors excepted

Log band saw Pilous CTR750EV, very good condition, rails new, 5.5 kW, 4100 mm belt length, 460 kgPrices subject to change, errors, printing and typesetting errors excepted

Exhibition / demonstration machineThe new Pilous DB700Automatic double edger is characterized by the best functionality and long service life due to its solid construction. 3 driven steel feed rollers at the bottom, 2 rotating pressure rollers with rubber coating at the topWith control panel for automatic saw blade adjustmentNumber of saw blades can be expanded as required2 return rollers on the machine for easy operations4 rows of anti-kickback technologySeveral emergency stop switchesEasily positioned scale. Saw shaft made of extra hardened premium

Log band saw Hauslhof CTR800Hydraulics, demonstration machine, Bloch diameter up to 830 mm, total length 5800 mm, width 2300 mm, with hydraulic system for clamping, clamping, turning and lifting the Bloch Motor output power total at 100% ED 10 KwIncluding:CTR800H-Ver3CTR800H-KSDCTR800H-STHCTR800H-STH-VCTR-SSPCTR- 11CTR-VORCTR-AMPCTR-EGLCTR-LG AutomatCTR-Pump-EA

Demonstration machineThe new, state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper partincl. Pre-cutting device! For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. stem diameter

Demonstration machineSolid log band saw for a log diameter of up to 71 cm with extension sections that can be extended indefinitely. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. 3.8 inch touch LCD display for height adjustment. Saw unit suspended on both sides for more stability and better precision. CE approved. Technical data:max. trunk diameter 71 cmmax. Board width 67 cmEngine output S1 5.5kW section length basic version 2.1mCutting length

Exhibition / demonstration machineThe new state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper part For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. trunk diameter 750 mmmax.

Demonstration machineExtra strong, solid, durable log band saw for a log diameter of up to 1000 mm. Soft starter is included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. Hydraulic angle stops.2 pieces of stem clamping tool. hydraulic saw blade tension. Electrically adjustable saw blade guide. CE approved.

Demonstration machineThe professional log band saw for a log diameter of up to 100 cm from Forestor Pilous is the further development of decades of sawmill tradition, specially designed for the sawing professional. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. 5 hydraulic angle stops.2 pieces of stem clamping tool. The saw is standard for blocks up to 7.6 m and can be extended as desired. Automatic feed with infinitely variable speed. Electrical

Log band saw CTR710M, built in 2013, 12 m cutting length, incl. LG 100 and scoring machine, 6 kW, 550 kgPrices subject to change, errors, printing and typesetting errors excepted

Log band saw Pilous CTR750E, built in 2024, very good condition, electric feed infinitely variable, 5.5 kWPrice subject to change, errors, printing and typesetting errors excepted

Double edging Pilous DB700M, built in 2023, like new, incl. saw blades, 11 kW, approx. 700 kgPrices subject to change, errors, printing and typesetting errors excepted

Pilous CTR520 log band saw, good condition, cutting length 5.8 m, max. 550 mm trunk diameter, 4 kW S1, 3110 mm cutting length, 310 kgPrices subject to change, errors, printing and typesetting errors excepted

Solid band mill for materials up to the diameter of 130 cm. Soft starter is included, with extending sections expandable. Automtic feeder with variable speed. Electrically height adjustment adjustable from control panel. With hydraulic log taber, log turner and clamping tool. CE Technical details: main engine power 22 kW S1 cutting length 6,7 m max. trunk diameter 130 cm weight 2800 kg

Band saw — horizontal Cutting diameter / cutting range (round) up to approx. 250 mm diameter Cutting range rectangular / square, typically also approx. 250 × 250 mm (depending on the material shape) Saw blade length ≈ 3660 mm Saw band width / thickness (band dimension) 25 mm belt width, approx. 0.9 mm thickness (e.g. 3660 × 25 × 0.9 mm) Cutting speed adjustable approx. 20 – 70 m/min, infinitely variable Weight of the machine approx. 700 – 850 kg

cutting diameter: 250 mm saw band length: 3660x25x0,9 mm cutting width: - mm total power requirement: 1 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2x10,5x1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm

Schnittgeschw. 20 - 70 m/min 16 A plug Length 1.85 m Width 0.80 m Height 1.20 m Weight 300 kg Coolant Unit Belt Gears 1 saw blade new Rollable

Band Saw FORTE F320 -Cutting range 90 degrees / Round - 320mm -Cutting Area / Square - 300mm -Cutting area 45 degrees 220x200mm -Cutting speed 20-100 mm/min -Cutting pressure hydraulically adjustable -Material length stop -Motor 1.5 KW -Saw blade dimensions 3660x25x0.9mm -Roller conveyors -Various replacement saw blades Dimensions: LxWxH 2.2x1.2x1.6 meters / Weight 700Kg

FORTE SBA 240 - Fully automatic band saw / 2x column-guided -Cutting diameter 250mm -Cutting speed 10-70 m/min -Multiple feed -Saw blade length 3660x27x0.9mm -Total power requirement 3 KW -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2x1.7x1.6 meters / Weight 1000Kg

cutting diameter: 420 mm saw band length: 4870 mm cutting width: 500 x 250 mm table height: 640 mm size of profile - max.: 400 x 400 mm cutting speed: 40 - 120 m/min saw band length: 4870 x 27 x 0,9 mm total power requirement: 3,0 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2,0 x 1,0 x 1,5 m Manual band saw Hydraulic saw blade tensioning Hydraulic workpiece clamping Hydraulic saw frame lift/lower Includes 4 spare saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible.

MF-25 Corner Forming Machine

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.

New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm

The BIRO F2000N, F3000N, F4000N & HD3000EHN Food / Patty Forming Machines are designed for production of a wide variety of meat and food products, with maximum production output capability from approximately 2000 to 4000 formed products per hour. A large number of drum mold die shapes are available. They vary from the standard round shapes of different diameters to special shapes such as square, oval, rectangle, fish, cutlet, heart, chicken leg, chicken nuggets, rabbit, bone, tree, pork chop, etc.

Dear Sirs, We are pleased to offer the following Used Open Die Forging Press, manufactured by Kawasaki (Japan), a well-known and reputable Japanese OEM. EQUIPMENT OVERVIEW Equipment: Open Die Forging PressManufacturer: Kawasaki (Japan) Manufacturing Year: 2012 Condition: Used, in production until May 2025 Application: Forging of rings and heavy forged components The press owner supplied forged parts (mainly rings) for power plant applications to leading OEMs such as Mitsubishi, Toshiba, GE, Hitachi, Fuji, etc. TECHNICAL SPECIFICATIONS General Press Capacity: 2,000 ton System Pressure: 30.0 MPa Pulling Capacity: 1,000 kN (100 ton) at 19.5 MPa Number of Cylinders: 3 Main Cylinder Diameter: 796 mm Press Weight: Approx. 130 ton Stroke & Daylight Stroke: 1,500 mm Daylight: 2,300 mm Table Fixed Table Size: 1,650 mm (R.L) × 2,400 mm (F.B)  ...

Pastry Forming Machines Forming Rollers 5 pieces we have in stock Dimensions 58.5cm x 12.5cm Details see picture

Formax ULTRA26 Former  The ultimate burger machine Suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high-volume processors to form popular products such as burger patties, pork sausage, chicken fillets and chicken nuggets. Delivers precise weight and shape control while forming products with a natural texture and excellent appearance.

Met RoboHelix-machines kunnen spiraalvormige schoepen worden gevormd uit standaard ronde of van een patroon voorziene werkstukken. RoboHelix-machines vereisen uiterst nauwkeurige synchrone bewegingsbesturing. Door de gebruiker gegenereerde gegevens worden vanuit cloudgebaseerde software, HelixNinja, naar het apparaat gedownload. Deze informatie wordt vervolgens verder verwerkt om coördinaten in het 3D-vlak te genereren, waarmee het proces van het creëren van een vliegtuig vanuit een blanco basis wordt nagebootst. De motoren volgen synchroon deze coördinaten om het vliegtuig te produceren. Met de elektronische nokkenplaatfunctie in TwinCAT NC Camming (TF5050) is relatieve synchrone beweging overal en altijd mogelijk. Afmetingen en toleranties zijn geen probleem meer zodra de motoren en aandrijvingen zijn gekalibreerd. De tweede generatie RX250 uit de machinelijn van RoboHelix heeft een ...

Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.

Belt width: 510 mm, Capacity: 25 - 75 strokes/min., Hopper: 240 kg, Mould: oval, (6x) 91x69 mm, Power: 3 x 400V, 50Hz, 22kW, Dimensions: 3700 x 1350 x 2600 mm, Weight: 2150 kg

bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 8,5-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

Form-on Quick-acting Clamp RU †compatible with Doka Framax/Ringer Master - your strong partner on site 🔧   When it comes to connecting frame panels, you need a solution that is fast, safe, and hassle-free. That’s exactly what the Form-on Quick-acting Clamp RU delivers. Thanks to its smart design, it grips flexibly into the continuous recess of the frame profiles †at any position you need. This saves you valuable time and gives you maximum freedom during assembly. ⭐   The integrated wedge is secured against falling out. For you, this means less risk, more safety, and noticeably easier handling. That way, you can complete your formwork tasks efficiently, reliably, and without unnecessary interruptions. 🚀   And because you deserve not only quality but also great value, we deliver the Form-on Quick-acting Clamp RU in a practical packagin ...

Form-on multi function clamp - compatible with Doka Framax/Ringer Master  †strong, versatile, reliable 🚚   With the Form-on multi function Clamp , you can connect your frame panels in no time. It provides tension-resistant and stiffening connections †whether it’s element, adjustment, or extension connections. This allows you to work safely, stably, and flexibly on the construction site. ⭐   The galvanized surface reliably protects against corrosion, while the practical 40 cm length ensures a perfect fit for your formwork solutions. 🔧   And because we know you value efficiency, we deliver the multi function Clamp in a practical packaging unit: 🚚 100 pcs in 1 MWC   With the Form-on multi function Clamp, you choose quality that lasts †and a tool that makes your job site smarter. 💪 Price: from € 3 ...

Year of Manufacture : 2021 Model : TEMPORA 45.03L Type of machine : Edge banding machine Manufacturer: Format-4 Voltage: 400 V Phase: 3 PH Frequency: 50 Hz Current: 22.8 A Power: 14.5 kW Minimum Air Pressure: 7 bar Find more here - / Contact us at -

gebr. Belt sander, Fabr. Format, Type BS 75 Built in 1999 Grinding width 75 mm with various abrasive belts