138,021 used machines on RESALE, but how to find them? Machine Search
SCHUURVONST HAS BEEN STANDING STILL SINCE 2008 ALL PAPERS AVAILABLE Auction-ID: A3-46164-10020
French papers Start with Booster Tipper Auction-ID: A3-46124-10051
The car starts and drives without any problems. Documents available, see photos for details. Auction-ID: A3-46164-4044
The car starts and drives without any problems. Documents available, see photos for details. Auction-ID: A3-46164-4921
Punching PAGUS punching punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm
New battery, 2007 apron, gas regulator recently redone 3331h Auction-ID: A3-46126-35903
Working machine, traction battery does need attention. Auction-ID: A3-46126-3482
Enclosed cab, road lighting, flash light, mirrors, masrack Auction-ID: A3-46126-559
Auction-ID: A1-50256-1430
Starts, drives, brakes, everything is fine. Smoker's car Crack in windshield Auction-ID: A3-46164-6126
HAS BEEN STATIONARY SINCE 2007 DOES NOT START ALL PAPERS COMPLETE Auction-ID: A3-46164-10022
The car starts and drives without any problems. Documents available, see photos for details. Auction-ID: A3-46164-4918
Biscuit forming machine Biscuit machine Janssen FM126M8 - Pastry forming machine - Manufacturer: Janssen - Model: FM 126 M8 - 380 volts
Suspended mast, suspended seat, full LED work lights, battery broken Auction-ID: A3-46126-560
2-roll flow-forming line NAM600S General condition: practically new / already out of service Scraper device (around the tailstock) Working stroke max. 500 mm Scraper force, infinitely variable from 50 - 200 kN Hydrau I i k / lubrication / cooling system Drive power Hydraulics approx. 75 kW Olin content Hydraulic tank approx. 1,500 I Equipment/Com ponents Hyd raulics Make Parker Hannifin Drive power oil lubrication approx. 4.4 kW Olin content Lubricant tank approx. 600 I Equipment/Com ponents Lubricant system Make Parker Hannifin Connected load Cooling system approx. 2.2kW lnhalt Coolant tank approx. 650 I Powerful coolant supply, adjustable 0 - 200 l/min. Cooling water requirement hydraulics + lubrication approx. 2.500 /h Cooling water flow temperature max. 25C min. Cooling water differential pressure 2bar Cooling water system jerk max. 5 bar Compressed air system pres ...
The car starts, drives and turns smoothly. Everything is fine. Auction-ID: A3-46164-6125
Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier, charger for scrubber-dryer -Manufacturer: FDK, charger type E230 G24/10 B-FDK -Input voltage: 230 V 50 Hz -Power: 24 V/10 A -Dimensions: 430/255/H215 mm -Weight: 12.4 kg
Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier, charger for scrubber-dryer -Manufacturer: FDK, charger type E230 G24/40 B-FDK -Input voltage: 230 V 50 Hz -Power: 24 V/40 A -Dimensions: 510/370/H395 mm -Weight: 31.2 kg
Various size; steel rim; without pallet; Auction-ID: A1-44050-306
Ford 3000 2WD diesel tractor – 1969 – 7,419 hours – hydraulic top link – Dutch registration Specifications: Brand: Ford Type: 3000 Year of construction: 1969 Date of first admission: 30-06-1969 Hours: approx. 7,418.8 hours, read Fuel: diesel Engine: 3-cylinder water-cooled diesel engine Displacement: approx. 2.9 litres Engine power: approx. 47 hp / 35 kW Drive: 2WD / rear wheel drive Transmission: 8-speed manual Dual Range transmission Forward gears: 8 Reverse gears: 2 Transition groups: high and low group PTO: 540 rpm rear PTO Hydraulic system: open-center Rear tires: 12.4-32 Length: approx. 3,220 mm Width: approx. 1,620 mm, depending on track width and tyres Height to bonnet: approx. 1,370 mm Height to outlet: approx. 2,100 mm Features: 3-point linkage Rear PTO Additional hydraulic valve block 2 hydraulic control levers Rear hydraulic connectio ...
Title: Ford 7840 Powerstar SLE 4WD Farm Tractor General specifications: Brand: Ford Model: 7840 Version: Powerstar SLE Vehicle type: agricultural tractor Fuel: diesel Drive: four-wheel drive (4WD) Closed cab Color: blue Maximum speed according to cab designation: 40 km/h Engine: Ford GA 401 CID Engine 6-cylinder diesel engine Engine without turbo Displacement: approx. 6,585 cc Rated output: 74 kW / approx. 101 hp Maximum torque: approx. 378 Nm at 1,197 rpm Liquid-cooled Fuel tank: approx. 227 litres Transmission: SLE transmission 16 forward and 16 reverse gears Four-stage powershift/load shift Synchronized group switching Synchronized reversing Electro-hydraulically operated all-wheel drive Electro-hydraulic differential lock Hydraulics and Linkage: Three-point rear linkage, category 2 Electronically controlled rear linkage Top link Height-adjustable towbar Four double-acting hyd ...
Delivers 230 and 400 Volt voltage, power 6500 Watt. Auction-ID: A1-49862-14
On offer is a STILL RX20-18 electric forklift from 2018. This modern electric forklift is known for its compact dimensions, high manoeuvrability and low running costs. This makes the machine ideal for work in warehouses, distribution centers, production companies and logistics environments where emission-free work is desired. The forklift has a nominal lifting capacity of 1,800 kg and is driven by a powerful 13 kW electric motor. The machine is equipped with a 48 Volt GNB traction battery with a capacity of 625 Ah, allowing for prolonged work between charges. The comfortable, fully enclosed cab provides weather protection and ensures a pleasant working environment. Thanks to its compact construction and precise electric steering, the forklift is very suitable for work in narrow aisles and indoor spaces. The machine is equipped with a completely free lifting mast, welding rack and fork ...
Drivepower 55Kw; Limited to 15 Km/h Auction-ID: A1-47391-118
Drivepower 55Kw; Limited to 15 Km/h Auction-ID: A1-47391-105
Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg
Consists of: Massivit 1500 large format industrial 3D printer, developed for the production of very large three-dimensional objects for the advertising, sign, retail, event, entertainment and architecture sectors, uses Massivit's patented GDP (Gel Dispensing Printing) technology, which directly cures a UV-curable gel during the printing process, allowing large, hollow and lightweight objects to be produced significantly faster than with conventional 3D printing techniques, manufacturer: Massivit 3D Printing Technologies Ltd., model: Massivit 1500 Exploration, serial number: 1514, CE marking, technology: GDP (Gel Dispensing Printing). 1 print head, material supply: proprietary gel cartridges / buckets, print material: Dimengel (UV-curing photopolymer gel), the GDP technology makes it possible to produce large objects virtually without support structures. The material is cured directly dur ...
maximum number of results exceeded
please refine your search
200 € 
