137,265 used machines on RESALE, but how to find them? Machine Search
SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - sn 06 - CE rules (year 1998)
Pester PEWO-pack 450 stretchwrapper for folding cartons, etc., including PEWO-therm shrink tunnel and PEWO-collect packing table, carton infeed with turning device and stacker, film splicing unit, format range cartons min. 30 x 30 x 60 mm (LxWxH), max. 100 x 100 x 250 mm (LxWxH), format range collation/bundle min. 30 x 30 x 60 mm (LxWxH), max. 300 x 380 x 250 mm (LxWxH), capacity up to 50 bundles per minute, electrics 3x400V+N+PE/50Hz, power consumption 13.1 kW, operating pressure 5 bar, infeed height 840 +/-10 mm, outfeed height approx. 800-950 mm, machine floor space approx. 4000 x 2513 mm (LxW), machine height approx. 2100 mm
SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - motor Hp 7,5 - wheel diam. 840 mm. - copying device - max cutting length 1300 mm - max cutting height 100 mm - cutting angle +- 45° - waste conveyor belt SMA - SN 08 - year 2002
Year 2015 Auction-ID: A1-50513-65
width of the strips: 100 mm band length: 1250 mm band speed: m/sec tube diameter: 16,5 - 90 mm angle adjustable from - to: 0 - 65 Grad connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,2 x 0,6 x 1,3 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm Documentation (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mm band length: 2000 mm band speed: m/sec tube diameter: 16,5 - 76 mm angle adjustable from - to: 0 - 65 Grad connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0,17 t dimensions of the machine ca.: 1,3 x 0,7 x 1,1 m ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade length: 4390 mm Cutting height: 345 mm max. cutting width: 585 mm Wheel diameter: 600 mm Engine 2,2 kW Table 680 x 680 mm Saw blade guide Foot brake
Table dimensions 830 x 600 mm, 30° tiltable Wheel diameter 600 mm. Wheel width 25 mm. Max. cutting height 295 mm. Max. cutting width 510 mm. Cutting length: 4380 mm. Motor power 2,2 kW. Extraction nozzle diameter 80 mm.
width of the strips: 200 mm band length: 1600 mm tube diameter: 38 - 170 mm connected load frequency: 400 V total power requirement: 3,0 kW weight of the machine ca.: 0,25 t dimensions of the machine ca.: 1,4 x 0,8 x 1,35 m Pipe grinding machine with 11 sanding rollers: 38 - 42 - 48 - 52 - 60 - 74 - 90 - 102 - 116 - 138 - 170mm Pipe clamping area 170mm Documentation (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...
Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)
Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230
Variklio galia 3.7 kW Ratų skersmuo 800 mm Maks. Ruošinio Aukštis 200 mm Pjuvenų nutraukimas Ø100 mm Stalo matmenys 750 x 630 mm Pagaminta Danijoje Transportavimo matmenys 2400x800x1700 mm Svoris 690 kg Kaina 1150 Eur + PVM
Thickness of sanding paper: 1,3 mm Width of sanding paper: 41 mm Length of sanding paper: 6280 mm Sharpening pitch: 6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mobile semi-automatic stretch bander. Max. band width: 30mm
Offer 24157 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Stepless belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - Saw blade welder IDEAL -Lighting
Operating mode: fully automatic/inline or manual Belt Feeding/Insertion: Automatic Band width: 5 mm Output: approx. 36 p/min Option: With Parcel Press and Parcel Stopper Transport speed table belts: Infinitely adjustable Technical documentation: fully available Odometer reading: approx. 50,000 strapping
Year 2007 Auction-ID: A1-50513-146
Metal Band Saw Saw blade welding machine, grinder Swivel table 380 V 16 A Electrics must be checked. Saw Blade Compressor for air blowing.
MACC Metal Band Saw Special 411 CSO Aut. Lowering Section cap. round up to 300 mm 2 speeds 38 + 77 m/min. Motor 1.6 kW, 400 V incl. machine base Weight approx. 530 kg
Year 2007 Auction-ID: A1-50513-132
used
Offer 24315 Univ. Radii Metal Belt Grinding Machine Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Contact disc / grinding roller Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact - sanding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm
Offer 24339 Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact disc / grinding roller for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm
Key data: 220 mm
MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg
Length: 5.25 m, 2 cm height, 3 teeth per 1 inch, Ready to saw: toothed, set, ground - ready for use, endlessly welded
ALDURO Metal Band Saw MBS-181 Lowering of the saw arm selectable hydraulic or manual Section cap. round up to 180 mm Motor power 2 kW, 400 V Swivel saw arm 60° L / 45° R Vise opening up to 230 mm incl. coolant device and machine base Weight approx. 195 kg This saw is also optionally available with a 230 V motor
Belt / roll width: 30 mm Mains voltage: 230V, 50Hz Paper from 70 g/m², film from 80μ (duplex film)
total power requirement:380V 50 HZ,1,67 kW dimensions of the machine ca.:1,4 x 1,8 x 1,4 m
total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw
cutting diameter: 320 mm saw band length: 4570 x 27 x 0,9 mm table height: mm cutting width: 450 x 280 mm power capacity: 4,0 kW cutting speed: 15 - 105 m/min engine: 380 V total power requirement: 4,0 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Band saw with - coolant device - mitre device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
AKEBONO OB 300 Band width: 29-30 mm, Mechanical speed max: 24-30 straps/min banding width: 20 x 380 mm banding height: 5 - 200 mm table depth : 330 mm banding material: paper, foil, clear polyfilm band
Standard equipment: With swivel head (left/right) for mitre cuts, two speeds, Stable cast construction of the machine housing, Oil bath reduction gears, consisting of bronze wheel and hardened, ground steel screw. Quick-release vise with Counterclamping device for double workpiece clamping. Long-lasting, mechanical coolant pump Adjustable length stop Operating tool Machine colour: RAL 7037 Specifications KS 315 M Motor three-phase current 400 V, Pole switchable (kW) 1.3/1.9 Vise Span(mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine Dimension with base frame (mm) 1,000 x 1,100 x 1,800 Machine Dimension 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame
Tünkers Liliput 210 banding machine; cleaned and tested; Working width 210mm; suitable for cold glue; Speed adjustable. Gluing machine Tünkers Liliput 210; cleaned and checked; working width 210mm; used for cold glue; adjustable in speed.
Offer 14044 Specifications: - 2-fold side edge belt sanding device - Sanding belt dimensions approx. 620 x 20 mm - Grinding equipment adjustable by handwheel - Support belt motor-driven - Support band dimensions approx. 2050 x 350 mm - Tilt-adjustable support strap - Table height approx. 950 mm -Mot. Grinding dust extraction - Drive 400 V - Space requirement approx. W 1100 x H 1450 x D 950 mm - Weight approx. 200 kg
The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band Width:20mm
Key data: 150 mm
ALDURO Metal Band Saw MBS-180SK Section cap. up to 180 mm round 4 belt speeds 22 / 33 / 45 / 65 m/min. Vise opening 260 mm Cooling system Hydr. Lowering Motor power 0.75 kW, 400 V Weight approx. 130 kg 0041 62 922 68 28
cutting width: 250 mm weight of the machine ca.: 1,3 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...
The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm
The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm
The US-2000 AB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm
used
Centauro SP-700 Band Saw Maximum cutting height 360mm Maximum cutting width 680mm Wheel diameter 700mm Blade length max/min : 4970/4870 mm Blade width max/min 40/10mm Tilt of the work table up to 20° 3kw main motor Power supply 400v Emergency brake CE Certified Year of production 2011 Extraction spigots 2x100mm Machine dimensions: 2180 x 1210 x 840 mm Net price
cutting diameter: 460 mm saw band length: 0/ mm table height: 0/ mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The US-2000 LB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm
Automatischer Banderolierautomat - Automatic Banding Machine HIMA BA 30/800 Baujahr / Year 10/2004 - Serial-No. 15005.225 Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic film Technical specifications: Leistung / Output: up to 23 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 200mm Bandbreite / band width 30mm Taktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button – über Fußschalter / foot actuator – über Automatiktaster / automatic mode button Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
maximum number of results exceeded
please refine your search
250 € 
