136,892 used machines on RESALE, but how to find them? Machine Search
Technical data Maximum pressure: 54 tons Power connection: 400V / 7.5 kW Pressing force: 5.62 kg/cm² Year of Make: 2004 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 500 kg Bale tying only with wire Machine is fully functional, after technical inspection and after renovation
• Lot of 4 manual die press • Piston diameter approx, 38 mm Auction-ID: A7-50834-617
Technical data Maximum pressure: 60 tons Power connection: 400V / 7.5 kW Pressing force: 4.54 kg/cm² Year of Make: 2002-2005 Bale size: 1200x1100x1100-1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 600 kg Machine is fully functional, after technical supervision and after renovation.
Maximum permissible pressure: 3.0 bar / 0 bar and 0 / –1 bar, Permissible temperature: 0 °C to +40 °C, Test pressure: 3.3 bar, Test medium: compressed air. Auction-ID: A1-50340-81
Technical data Maximum pressure: 50 tons Power connection: 400V / 4 kW Press force: 5.2 kg/cm² Year of construction: 2013 Bale size: 1200x800x1100 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical inspection and after renovation
Technical data Maximum pressure: 20 tons Power connection: 380V / 2.2kW Pressing force: 2.6 kg/cm² Productivity: approx. 6 bales/hour Bale size: 1100x700x800 mm Price: on request Bale weight: approx. 200 kg Year of Make: 1991 Machine is fully functional, after the technical inspection.Price also includes the paint renovation
General Description High-speed mechanical stamping press manufactured by JELŠINGRAD under licence from Hermann Raster KG, Germany, model BPA-75 . Heavy-duty press designed for high-volume progressive-die stamping, punching and blanking from coil. Technical Details Manufacturer: JELŠINGRAD Model: BPA-75 Year: 1985 Serial number: 8510917 Nominal pressing force: 750 kN / 75 t Stroke rate: Infinitely variable 120–600 strokes/min Ram stroke: 10 / 50 mm Working hrs: aprox. 13000 Ram adjustment: 80 mm Maximum daylight: 400 mm Table: 1,250 × 750 mm Distance between uprights: 730 × 620 mm Maximum strip width: 300 mm Strip feed height: 100–130 mm Feed length per stroke: 5–15 mm Motor power: 15 kW Power supply: 3 × 380 V, 50 Hz Air clutch and brake Compatible with pneumatic strip feeding equipment, which is installed on machine Electrical cabinet and controls inc ...
Key data: 100 t
Manufacturer: Hidroliksan Model: CFSS 100t Year: 2022 Condition: Used Stock number: 9614 Operating hours: 800 h Compressive force: 100 t Table length: 800 mm Table width: 500 mm Stroke: 400 mm Machine height: 2930 mm Machine length: 1600 mm Machine width: 1700 mm Machine weight: 6000 kg
- Strength 2700 kg. - Pedal actuation. - The table on which it is resting and a manual rectangular hole punch are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-611
Code: 0499 Brand: COMAFER Model: DINAMIC 70/60 - CE Standard Hydraulic briquetting machine for compacting sawdust and wood shavings, for joinery workshops, furniture, bespoke furnishings, wooden joinery and other applications – CE Standard Technical data: The advantages of briquettes are: Twice the calorific value of wood Almost no residue after combustion Much cleaner boilers Briquette diameter 65 mm Output 30/80 kg Pump motor 7,5 Hp Wood chip hopper diameter 1000 mm Overall dimensions mm 1100 x 1800 x 1650 h Weight kg 800
1000ml capacity 5 bar design pressure 50°C design temperature Auction-ID: A1-50846-52
1000ml capacity 5 bar design pressure 50°C design temperature Auction-ID: A1-50846-51
Electrically driven hydraulic unit on box with wheels. Content not known. Auction-ID: A1-50656-190
Electric/hydraulic press unit on transport trolley Machine size 630x450x600 mm Transport trolley 900x520x940 mm Auction-ID: A1-50656-179
- Strength 4100 kg. - Pedal actuation. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-604
- Strength 4100 kg. - Pedal actuation. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-603
Please note! Without further accessories. Defect Auction-ID: A1-50340-85
General Description Mechanical stamping press manufactured by ILR , designed for heavy-duty metal forming and stamping operations. The machine has been fully modernized with a PLC control system and is suitable for manual or automatic operation with a sheet feeder. Technical Details Manufacturer: ILR Machine type: Mechanical press Year of manufacture: 1972 Year of refurbishment: 2024 Press force: 250 t Stroke rate (manual): 45 strokes/min Stroke rate (automatic): 20 strokes/min Table size: 1,120 × 740 mm Stroke: 400 mm PLC-controlled digital operating system Operating modes: • Automatic with sheet feeder support • Foot pedal control • Two-hand control Safety light curtains installed Condition Used industrial condition. The machine was refurbished in 2024 and upgraded with a modern PLC control system. Equipped with safety light curtains and multiple operatin ...
Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement.
The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the bo ...
Technical data Maximum pressure: 8 tons Power connection: 400V/4kW Press force: 3.23 kg/cm² Year of Make: 1991 Bale size: 550x450x350 mm Productivity: - Bale weight: 30-60 kg Price: on request Machine is fully functional after technical supervision.
Frame press Maweg hydraulic Type: EURO-AUTO Year of Make: 1991 Machine No. 09111003001 Crimping dimension L 2700 mm x H 1800 mm 3 movable press rams with 1 hydraulic each. Cylinder from above 1 movable stop beam from the right with 2 hydr. cylinders Bearing surface of the printing plates 120 x 100 mm Cylinder stroke 200 mm 3 brackets for low parts, length 300 mm Pneumatic quick adjustment system of the upper press punches With 3 mm rack and pinion grid system 2 Hand Safety Automatic Control complete with hydraulic pump Dimensions 3600 mm x 900 mm x H 2500 mm
Offer 26321 Technical data: - Max pressing force approx. 100 t - Max ram stroke approx. 159 mm - Pressure stamp left + right can be moved by hand crank - Stand width approx. 780 mm - Stand depth approx. 300 mm - Max. installation height approx. 820 mm - Table height-adjustable in 6 positions with hand crank and plug-in bolt grid - Grid spacing 140 mm - Connection 400 V - Space requirement approx. W 1550 x H 1900 x D 1000 mm - Weight approx. 850 kg
Joos HP 90 Hydraulic veneer press with electric combi heating plates For sale is a well-maintained veneer press with the following data: -Pressing area 2.55m x 1.35m -Height of the pressing room 0.4m -Operating pressure 355 bar -Basic dimensions 2.98m x 1.53m x 2.1m
Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use due to pneumatic height adjustment Duelhole drilling on two planes in one clamping Motor power 1.5 kW Start of the motor with practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without changing. The desired drilling heights can be set for each drilling level with a digital counter, the changeover then takes place pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment on the side in 12mm grid Stop for length adjustment in slotted milling 2 swivelling workpiece supports Special stop syst ...
High-pressure compressed air handling unit , mounted on a chassis and equipped with a temperature and pressure control device. Manufacturer: BEKO TECHNOLOGIES GmbH Type: AC 020-030 +35°C HP 060 Year of Manufacture: 01/2020 Serial Number: HP030.060.0120679 Test pressure: 143 bar(g) Maximum permissible pressure: 100 bar(g) Working pressure of compressed air: 60 bar(g) Operating temperature: +20 to +35 °C Maximum volumetric flow rate at the inlet: 30 m³/h according to ISO 1217 Power supply: 230 V / 1 Ph. / PE / 50 Hz Approximate weight: 210 kg Notified Body: TÜV NORD Systems Visible equipment: STÖRK temperature controller, pressure gauges, stainless steel piping and two pressure vessels Marking: CE 0045 Visible pressure vessels: Type: HD-B147.100 Serial numbers: 1470120470 and 1470120471 Unit volume: 7.7 liters Test pres ...
High-pressure industrial piston compressor, mounted on a chassis and equipped with an electrical control cabinet. Manufacturer: Neuenhauser Kompressorenbau GmbH – NK Type: 40.2.3.02.01.10.63 Year of manufacture: 2020 Serial Number: 27/20 Effective flow rate (f.o.d.): 30 m³/h Operating pressure: 60 bar Compressor speed: 1,500 rpm Power Requirement: 13 kW Electric motor: LAMMERS, three-phase, 15 kW at 50 Hz Motor speed: 1,470 rpm at 50 Hz Motor connection: 400 V Δ / 690 V Y – 50 Hz Motor protection rating: IP55 Efficiency class: IE3 Indicated engine weight: 160 kg Visible equipment: control cabinet with Siemens LOGO! TDE, main disconnect switch, selectors and reset button Marking: CE – Made in Germany Auction-ID: A1-51172-27
High-pressure industrial piston compressor, mounted on a chassis and equipped with an electrical control cabinet. Manufacturer: Neuenhauser Kompressorenbau GmbH – NK Type: 40.2.3.02.01.10.63 Year of manufacture: 2020 Serial Number: 28/20 Effective flow rate (f.o.d.): 30 m³/h Operating pressure: 60 bar Speed: 1,500 RPM Power Requirement: 13 kW Visible equipment: electric motor, cooler, pressure gauge and control cabinet with Siemens display Marking: CE – Made in Germany Auction-ID: A1-51172-26
Maximum compressive force: 30 US tons / approx. 267 kN Manual hydraulic control 2-speed hydraulic pump 4-Threaded Column Configuration Working surface: 305 x 305 mm Cylinder stroke: 152 mm Adjustable vertical opening: 25 to 432 mm Fully guided mobile platform Dual Scale Analog Pressure Gauge Pressure Gauge Range: 0 to 60,000 lbs Pressure gauge graduation: 500 lbs Overall dimensions: approx. 610 x 737 x 1,168 mm Weight: approx. 312 kg Equipped with a transparent protective screen Auction-ID: A1-51172-109
Brand: Kremer Type: 20 meters with reel 20 mtr air hose extendable 2 mtr air supply hose 280 bar working pressure 1/4\" quick fitting 3/8\" hose Delayed roll-in mechanism Auction-ID: A1-40900-291
Brand: Kremer Type: 20 meters with reel 20 mtr air hose extendable 2 mtr air supply hose 280 bar working pressure 1/4\" quick fitting 3/8\" hose Delayed roll-in mechanism Auction-ID: A1-40900-435
pressure: 125 t chamfer lenght: 3200 mm distance between columns: 2700 mm throat: 350 mm mould space: 395 mm stroke of upper beam: 160 mm work height max.: 900 mm working feed: 9 mm/sec return speed: 90 mm/sec total power requirement: 11 kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: LBH 3,3 x 1,7 x 2,54 m -Electronic position display -Motorized backgauge -Crowning system -Upper tools as shown -x-bending die -Lazersafe safety system -Foot pedal -Operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
High-pressure centrifugal pump Grundfos CR120-6-1 used, 55 kW, 120 m³/h flow rate, 127 m head good condition
Key data: 600 t, 550 mm
RÖCHER hydraulic press from the site.
Outrigger size: 500x500 mm; left and right movable punch button; Tabletop size 2000x500 mm; maximum punch passage approx. 140 mm Auction-ID: A3-46142-21208
Brand: Metaleen Tools & Equipment (visible on the frame of the machine). Type: WE67K-160T/3200. Year of manufacture: 2025, deduced from the serial number/order date. Serial number: 2025040195. Capacity t: 160 tons. Working length mm: 3200 mm. Control, brand, type: Delem DA-53T-[N], serial number 244400017, Delem PN D8087-007, software version V1.8.23, produced by Delem, Eindhoven (NL). Auction-ID: A3-46142-11241
Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50799-149
Code: 0412 Brand: ORMAMACCHINE Model: NPC/R 35/13 - CE Standard Hydraulic hot press for joinery, furniture, bespoke furnishings, veneering, panels, doors, wooden joinery, composite materials and miscellaneous items – CE Standard Sturdy construction Solid perforated steel platens 3500 x 1300 mm Fixed lower plate – Movable upper plate Plate thickness 80 mm 6 pistons diameter mm 85 Total thrust 120 ton Option for either oil or steam heating Installed power 8 Kw Overall dimensions mm 4500 x 1550 x 2700 h Weight kg 10000
Used Comark C9557 pressure gauges Runs on 9V battery Auction-ID: A1-50936-222
Used Druck DPI 705 Digital Pressure Gauges/Indicators Battery operated Auction-ID: A1-50936-223
Pneumatic spray gun to be used in combination with a paint tank. Auction-ID: A7-50799-425
The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50799-239
Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50798-316
The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50799-139
Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50799-49
Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1200 mm Weight: 310 kg Auction-ID: A7-50799-110
Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50798-176
maximum number of results exceeded
please refine your search
100 € 
