band conveyor used for sale

MACC Metal Band Saw Special 411 CSO Aut. Lowering Section cap. round up to 300 mm 2 speeds 38 + 77 m/min. Motor 1.6 kW, 400 V incl. machine base Weight approx. 530 kg

Offer 24315 Univ. Radii Metal Belt Grinding Machine Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Contact disc / grinding roller Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact - sanding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Offer 24339 Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact disc / grinding roller for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Machine Type: Aluminum Saw Manufacturer: Emmegi Type: 550 SCA Year of Make: 1996 Condition: used Offer will only be sent if a complete imprint is provided! Price 2.950 Euro incl. 19% VAT Location Warstein , Germany Reference M-EME-0724 DESCRIPTION We offer you a used aluminum saw from the manufacturer Emmegi. Saw blade stutters up, hence the special price. Saw drive runs clean and quiet Digital angle display New minimum quantity lubrication from Menzel from 2022 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Key data: 220 mm

MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg

ALDURO Metal Band Saw MBS-181 Lowering of the saw arm selectable hydraulic or manual Section cap. round up to 180 mm Motor power 2 kW, 400 V Swivel saw arm 60° L / 45° R Vise opening up to 230 mm incl. coolant device and machine base Weight approx. 195 kg This saw is also optionally available with a 230 V motor

Belt / roll width: 30 mm Mains voltage: 230V, 50Hz Paper from 70 g/m², film from 80μ (duplex film)

cutting diameter: 320 mm saw band length: 4570 x 27 x 0,9 mm table height: mm cutting width: 450 x 280 mm power capacity: 4,0 kW cutting speed: 15 - 105 m/min engine: 380 V total power requirement: 4,0 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Band saw with - coolant device - mitre device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard equipment: With swivel head (left/right) for mitre cuts, two speeds, Stable cast construction of the machine housing, Oil bath reduction gears, consisting of bronze wheel and hardened, ground steel screw. Quick-release vise with Counterclamping device for double workpiece clamping. Long-lasting, mechanical coolant pump Adjustable length stop Operating tool Machine colour: RAL 7037 Specifications KS 315 M Motor three-phase current 400 V, Pole switchable (kW) 1.3/1.9 Vise Span(mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine Dimension with base frame (mm) 1,000 x 1,100 x 1,800 Machine Dimension 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame

Tünkers Liliput 210 banding machine; cleaned and tested; Working width 210mm; suitable for cold glue; Speed adjustable. Gluing machine Tünkers Liliput 210; cleaned and checked; working width 210mm; used for cold glue; adjustable in speed.

Offer 14044 Specifications: - 2-fold side edge belt sanding device - Sanding belt dimensions approx. 620 x 20 mm - Grinding equipment adjustable by handwheel - Support belt motor-driven - Support band dimensions approx. 2050 x 350 mm - Tilt-adjustable support strap - Table height approx. 950 mm -Mot. Grinding dust extraction - Drive 400 V - Space requirement approx. W 1100 x H 1450 x D 950 mm - Weight approx. 200 kg

Key data: 150 mm

ALDURO Metal Band Saw MBS-180SK Section cap. up to 180 mm round 4 belt speeds 22 / 33 / 45 / 65 m/min. Vise opening 260 mm Cooling system Hydr. Lowering Motor power 0.75 kW, 400 V Weight approx. 130 kg 0041 62 922 68 28

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band Width:20mm

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

The US-2000 AD with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

The US-2000 AB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

cutting width: 250 mm weight of the machine ca.: 1,3 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 500 mm capacity 90 degrees: square: 420 mm : 600x400 saw band length: 5320x34x1,1 mm band speed: 15 - 100 m/min table height: 805 mm total power requirement: 3,0 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload s ...

Centauro SP-700 Band Saw Maximum cutting height 360mm Maximum cutting width 680mm Wheel diameter 700mm Blade length max/min : 4970/4870 mm Blade width max/min 40/10mm Tilt of the work table up to 20° 3kw main motor Power supply 400v Emergency brake CE Certified Year of production 2011 Extraction spigots 2x100mm Machine dimensions: 2180 x 1210 x 840 mm Net price

cutting diameter: 460 mm saw band length: 0/ mm table height: 0/ mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The US-2000 LB with ultrasonic technology is a powerful, proven and universally applicable banding machine. It is extremely robust, low-maintenance and energy-efficient. Thanks to its modular design, infinitely adjustable belt tension, numerous options and many different sheet sizes, it can process products in almost all sizes and with different properties. The US-2000 AD processes tape made of paper and foil. Band width: 20mm

Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2011 - Serial-No. BTA 734/3 V5B16897 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Automatischer Banderolierautomat - Automatic Banding Machine HIMA BA 30/800 Baujahr / Year 10/2004 - Serial-No. 15005.225 Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic film Technical specifications: Leistung / Output: up to 23 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 200mm Bandbreite / band width 30mm Taktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button – über Fußschalter / foot actuator – über Automatiktaster / automatic mode button Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Automatische Bündelauslage / Fully Automatic Banding Delivery Palamides Delta 703 Baujahr / Year 2008 - Serial-No. 2244 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Horizontale Trennsäge / Horizontal Band Saw Jllig TS 100 V Baujahr / Year 1973 - Serial-No. 959 Arbeitsbreite / Working width max. 590mm Ersatz Sägeblatt / Spare Saw band Stufenlose Höhenverstellung des Sägebandes / stepless height adjustment of saw band Stufenlos regelbarer Antrieb / stepless adjustment drive Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

- Ultra-Sonic banding machine - Standard with the existing accessories

range L-W-H: 400x300x200 mm saw diameter: 420 mm weight of the machine ca.: 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 483 mm cutting range: Vert. 508 / Hor. 457 mm Cutting length: 356 mm weight of the machine ca.: 2.3 t dimensions of the machine ca.: 3.05 x 2.05 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SKU BS-250M Return Manual Rake angle adjustment Ehrwinkelkopf Grit angle 1 – 60° Motor power 2.2 kW Cutting area 90° rectangular 259 mm x 110 mm Capacity Round 90° x 45° x 60° 227mm / 150mm / 90mm Square capacity: 90° x 45° x 60°, 220 x 220 mm / 144 x 144 mm / 84 x 84 mm Table height 889 mm Strip guide carbide and ball bearings Belt dimensions (H x W x L) 27 x 0.9 x 2470 mm Blade speed 20 - 85 rpm Lowering Control Hydraulic Support Drive Gear Operating voltage 230 V, 50 Hz, 1-phase Delivery weight: 216 kg Shipping dimensions (L x W x H) 1524 x 1118 x 1219 mm

MEP Shark 260 Price 1650 Adjustable gravity lowering Round tube cutting capacity mm. 210mm. at 90° Cutting capacity with square cross-section mm. 200mm. at 90° Cutting capacity other cuts 270x200 mm. Head motor power kw.1.8 Engine revolutions 2 speeds RPM 36 - 72 Strip development diameter 2750 x 25.4 s. 09mm. User Manuals CE Declaration of Conformity Machine weight kg. 350

SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Inclination: 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Bsjuxvmq0O3 Saw blade speed 25-115m/min Butt welder capacity 3-16mm Engine Size: 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Circuit breaker Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welding machine, blade shears and grinding machine Nuttisch Low-voltage halogen lamp Mitre protection for oblique cuts Quick-gap stop for straight cuts

Technical Parameters Maximum cutting performance Round: 650mm Square 650×800mm Saw blade Speed 20~80 m/min Size 54X1.6 Guidances Tungsten carbide and bearing blade guides Cleaning Wire Brush & Flood Coolant Voltage Hydraulic Power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

AS NEW CONDITION WORKS IN PRIVATE WORKSHOP FROM NEW. Working mode: Semiautomatic Machine type: Horizontal bandsaw Cut: Straight cut Mitre cuts range: 0° Drive: 4 kW, 3x400 V/50 Hz Saw band speed: 20 - 120 m/min. Saw band dimensions: 4 580 x 34 x 1,1 mm Material loading height: 780 mm Length: 2 172 mm Width: 1 197 mm Height: 1 771 mm Weight: 800 kg This universal semiautomatic bandsaw of a double-column construction, designed for perpendicular cuts of materials up to 280 mm in diameter, provides high quality at an affordable price. The saw arm is guided by two robust columns and laid on preloaded, no-clearance linear guiding on one side and on auxiliary guiding on the other side. The excellent cutting performance results from these features: a three-sided hardmetal precision guide of the 34 mm high saw band and synchronou ...

roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal Radius Metal Belt Sanding Machine Specifications: - Sanding belt dimensions 2000 x 75 mm - Surface grinding opening 400 x 75 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Working height 960 mm - Various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg

roll diameter: 400 mm throat: 390 mm workpiece height: 240 mm saw band length: 2980 mm table surface area: 500x600 mm weight of the machine ca.: 350 kg dimensions of the machine ca.: 650x1100x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. saw blade D 350 mm, Miter: 45-90° left + 45°-30° right, Speeds/ motor power 9/18/36/74 rpm. 1.5 + 1.8 kW, Automatic cutting feed infinitely adjustable, pneumatic jaw clamping Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm Square 90° 100 x 100 mm Square 45° 95 x 95 mm Square 30° 85 x 85 mm Dqyu0F Round 90° 120 mm Round 45° 120 mm Around 30° 100 mm Smallest dimension to be sawn around 10 mm Smallest dimension to be sawn flat 10 x 10 mm coolant device, roller conveyor, Voltage 380V-50Hz Connection cable with 16 A CEE plug, new saw blade, Operating instructions with spare parts list and electrical circuit diagram, new engine

Banding maretial PW8030150 white paper 40 rolls and PB7030150 brown paper 40 rolls. Banding maretial PW8030150 paper white 40 rolls and PB7030150 paper bouwn 40 rolls.

- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l

Ultrasonic Banderolier ATS US 2000 AST-MDM; cleaned and tested; Frame size 900x750mm; Belt width 30mm; suitable for paper (also suitable for TruePaper paper) or foil; Meter reading 795,000 thousand; Compressed air required. Ultrasonic banding machine ATS US 2000 AST-MDM; cleaned and checked;  frame size 900x750mm; band width 30mm; used for paper (also for TruePaper material) or foil; counter 795,000; pressurized air needed.

Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Offer 24149 Specifications: - Cutting range at 90° around 320 mm - flat 300 x 270 mm - Material replenishment stroke up to 500 mm - Unlimited multi-stroke - Remnant length in automatic mode 125 mm - Saw blade dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise -Conveyor - Saw blade cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm

Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm ) Width of saw pulley face-optional 5 1/2" (140mm ) Maximum width of saw-standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9,1" ( 2770mm ) Overall width 8,1" ( 2460mm ) Speed of saw pulleys,r.p.m. 8,000( 2440m/min ) Horse-power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42,6m) Shipping Specification : Standard Machine : Nett weight, lbs. 3583 Kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide f ...

: 325 mm : 4380 mm : 400 mm : 325 mm : 400x325 mm dimensions of saw-band: 4380x34x1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5334 mm cutting width: 1,3 mm cutting range - square -: 320 x 320 mm cutting range - flat -: 500 x 320 mm control: minipos 807 cutting speed: 16 - 80 m/min dimensions of saw-band: 5334 x 41 x 1,3 mm feed length: 580 mm feed length: multiple: 5800 mm total power requirement: 8 kW weight of the machine ca.: 3,5 t dimensions of machine L x W x H: 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 235 mm dimensions of saw-band: 2480 x 27 x 0,9 mm cutting width: 280 x 190 mm cutting speed: 45/90 m/min : 120 mm : 120 mm : 190 mm Impact energy: 170 mm connected load frequency: 400 Volt total power requirement: 1,1 kW weight of the machine ca.: 290 Kg dimensions: 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 3150 x 27 x 0,9 mm table height: 750 mm cutting width: 170 x 310 mm cutting speed: 25 - 90 m/min : 130 mm : 130 mm : 205 mm Impact energy: 205 mm connected load frequency: 400 Volt total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions: 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

label banding machine Tünkers Liliput 350; cleaned and tested; Working width 350mm; suitable for cold glue; 2 machines in stock. Gluing machine for labels Tünkers liliput 350; cleaned and chekced; working width 350mm; used for cold glue; two machines on stock.

Contour edge bander Fabrikat: VITAP Type: BC91 EVO Demonstration machine Technical data: - For straight and curved pieces (convex and concave) - To glue pieces thickness 10-60 mms., in PVC, melamine, veneer, plastic laminate and solid wood - 2 glue spreading rollers - Cutting guillotine up to 3 mm. thickness - Encoder for high precision cutting of the tape ( for shaped closed pieces) - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece - End switch tape cut (only for straight pieces) - Feeding speed adjustable from 3mt to 20mt per min. - Solid Phenolic table easy to clean and with no transmission of heat - Manual / Automatic band cutting device - Glue pot (kgs. 3), with electronic adjustable heating system -Tilting table 0°-45° - Standard accessories - CE standards