129,001 used machines on RESALE, but how to find them? Machine Search
A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible.
width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 200 x 32 mm grinding wheel hole diameter: 30 mm total power requirement: 0,9 kW weight of the machine ca.: 35 Kg dimensions of the machine ca.: 620 x 540 x 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mm band length: 1220 mm dimensions of grinding wheel: 225 mm work table:: 150 x 400 mm Table tiltable up to: 90 Grad table surface area: 150 x 130 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 35 Kg dimensions of the machine ca.: 650 x 360 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BANDERA SINGLE LAYER BLOWN FILM EXTRUDER, for LDPE MDPE + RLDPE, 3-stations Piovan volumetric dosing uniit, Screw diam. 80 mm., 200 mm. die, dual-flow Garba Plast head 200 mm (new in 2022), pull off unit, single rewinding unit 1.200 mm. wide, c.a.drive with new inverters, Average throughput rate 100 kg/h, The line can be inspected any time., Recently used for garbage bags, it includes a 1-color printing group, corona treatment, tower included, electric cabinet for conplete management, immediately available, availability: Immediate, PRESENT CONDITIONS: running and testable, ACCESSORIES: corona treatment+1-col. printer
BANDERA BLOWN FILM EXTRUDER, for PE, Bandera extruder with screw diam.90 mm., 250 mm die diam. on original Bandera head, reconditioned (not the one in photo), a.c. drive with inverter, calibrator, haul off unit, corona treatment, single color small printing group, single winding station with manual discharge 1.200 mm., good overall conditions, availability: immediate, working width: 1.200 mm., conditions: good
Screw Diameter: 140 mm // Throughput: 900 kg/h
Materials: LDPE, LLDPE, mLLDPE, Metallocene, EVA, EVOH, PA // Film Width (Max): 1800 mm
screw ø:: 60 mm screw length:: 11D screw speedl:: -- U/min drive power:: 18,5 kW Condition: used, reconditioned Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 11D - New screw - Cylinder refurbishment - Feed roller refurbishment - New safety cage - New rotary joint for water - New AC motor: 18.5 kW - New control cabinet with Siemens S7-1200 PLC system - New control panel with Siemens KTP700 Basic touch panel - New Siemens G120 frequency converter for variable speed - Remote maintenance device - New cabling - Pressure sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Refurbished in accordance with CE standard safety regulations Warranty: 1 year Option: TCU for temperature control of the water up to 95°C, for placement near the extruder The data for this ad ...
BANDERA TWIN SCREW PVC PIPES EXTRUDER, for pipes with min/max diam.40/200 mm., extruder with n.2 parallel counter-rotating screws Ø 90 mm, Throghput rate 400 kg/hr, missing of screenchamger (can be added separately), n.2 dies available 40 to 125 mm + 125 to 200 mm., Tooling from 40-200 mm (available diam. 100 mm for O-Ring), Bandera 6 mt.long vacuum calibration tank, IPM haul off unit, IPM saw, IPM belling unit, constructed in 1998, totally refurbished in 2006 by Plasco, machine now disconnected, offered RECONDITIONED., availability: immediate, working width: 40-200 mm Ø, capacity: 400 kg/h, conditions: disconnected, type: pipes extrusion line
temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Late model Hobart commercial meat saw. Model 6801, serial number 31-1464-941, 200/230volts and 3 phases. Tested. Comes with one 142" blade. Unit has normal wear of used equipment, will require some extra cleaning.
General SKU294N388 LocationBarneveld MakeBHS Werk Sonthofen Dimensions Filter width80 cm Material Product contact materialStainless steel 1.4529 (926) Main Features MaterialStainless steel Motor15 KW Surface2.25 m2 Specified Features - Vacuum belt filter Vacuum belt filterEnclosed indexing vacuum belt fliter Filter surface2,25 m² Filter width800mm Number of sections:6 Without motor(pneumatic) Knife dischargecheck (knife blade not included) With vacuum pumptype PMMZF 3813 D3 Motor15 KW, 500 Volt With vacuum tankcheck MaterialStainless steel Information TypeBF 5 /4.5-KD Year of construction1997 Floorspace7,0 x 2,0 m Total height2,5 m Weight5000 kgVacuum belt filtersBHS SonthofenFilters > Vacuum belt filtersBrand > BHS Sonthofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...
Sawblade width max.: 120 mm Weight: 350 kg Motor output: 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding. Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80120175cm - Net/gross we ...
Modular unit, finishing unit, sanding unit, sanding station, belt sander, belt sander, edge sander, edge sanding machine, profile sanding unit, small belt sander -comes from a Homag edge banding machine -swivelling -height adjustable -Max. Sanding belt width: 80 mm -oscillated -Sanding shoe: with air cushion -Drive: 1.1/1.4 kW -Speed: 1425/2850 rpm -Sanding shoe dimensions: L/W mm -Dimensions: 1000/1200/H1000 mm -Weight: 292 kg/piece
Belt line cutting device, cut-to-length line, cut-to-length shears, lever cutting machine, lever cutter -Cut-to-length system: with additional lever cutter, made from slats/blinds production -Cutting width: max. 210 mm -Cutting thickness: max. 0.5 mm -Lever cutter: IDEAL 2035 -Transport dimensions: 1025/500/H1240 mm -Total weight: 122 kg
Aggregate kit, finishing unit, grinding unit, grinding station, belt sander, belt grinder, edge grinder, edge sander, profile sanding unit, small belt sander -Manufacturer: KED Kurt Ehemann, Homag, belt sanding unit from belt sander -Type: unfortunately no type designations -Roll: Ø 215 x 295 mm drum motor NG 45/2n 3 kW 2850 rpm -Roll: Ø 150 x 160 mm -Individual components: see photos -Transport dimensions: 830/690/H360 mm -Weight: 144 kg
Description BANDELIN Sonorex RK 158 M High-performance ultrasonic cleaner in stainless steel design with heater for use in practice, laboratory and workshop. The proven and particularly robust SONOREX ultrasonic baths clean thoroughly and gently by means of intensive cavitation bubbles, even in the hard-to-reach areas of the cleaning objects. A user-friendly twist handle operation is used to easily adjust the cleaning time and bath temperature. The fully automatic SweepTec function prevents standing waves in the ultrasonic field and ensures particularly uniform cleaning
Width of the band swa blades: 50-200 mm Sharpening pitch: 60 mm Weight: 750 kg WINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNC PNK-CNC is designed to grind all types of band saw blades used in metal cutting. PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technology Technical specifications: - Band saw width 50-200mm - Band saw length Max. 12m - Blade thickness Min 0.4mm - Tooth pitch Max. 60mm - Tooth depth Max. 30mm - Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°) - Feed rate (speed controlled) Max. 90 teeth/min. - Grinding wheel dimensions D: Ø250mm d:Ø20mm - Grinding wheel thickness 5-13mm (depending on tooth pitch) - CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm - CBN Grinding wheel thickness 2-3mm (depending on tooth pitch) - Grinding wheel rotation (speed controlled) 1400-5500 r.p. ...
Waste recovery and sorting plant for sale in Barcelona, Spain On behalf of CLD Corporation, TEGA Industrial Assets announces the sale of a complete waste recovery and sorting plant located in Barberà del Vallès, Barcelona, Spain. The sale is due to a change in operations at the site. The plant was installed in 2022, has very low working hours and is in excellent condition. It is designed for the treatment of mixed non-hazardous waste and commercial and industrial waste through an automated sorting, classification and material recovery line. The facility has a nominal capacity of 11.42 tonnes/hour and includes equipment from leading European manufacturers, including PICVISA, NIHOT, SPALECK, GÜNTER, FELEMAMG, SPR and others. Main equipment includes a shredder/bag opener, feeders, screens, optical sorters, densimetric separator, magnetic separators, eddy current separator and ma ...
used
horizontal conveyor belt with hydromotor
NNP Stainless conveyor Stainless frame, overall belt dimensions 1600mm x 900mm, made up of 18mini belts 50mm width, 0.37Kw motors, 3Ph
Brand: Ambaflex Type: Apollo Width of the band: 400mm Transport height at the bottom: 400 mm Transport height above: 2000 mm
Height-adjustable powered roller conveyor, suitable for pallets and other large packages. The conveyor belt can be adjusted in height and is driven by two motors to distribute the load evenly. See the last image for all dimensions of the conveyor. - complete solidworks and STEP- files available - The powered roller conveyor is divided into two sections, and the division of these sections can be adjusted as needed. - The machine has been used in combination with a bag in box filler. The roller conveyor has been lightly used but is in good and working condition. Please contact for more infromation.
Syspal 508/023144 Vibratory conveyor Serial: K80201-1 2019, Stainless, conveyor dimensions 1500mm x 270mm, adjustable vibration control, mobile, 1P508h
Turns: 3.25, infeed: south, outfeed: West, infeed height: 3700mm, outfeed height: 1000mm, transport direction: downwards, max. belt speed: 40m/min, max. belt load: 45kg/m. Including an external control cabinet. Documentation available. On-site inspection is possible.
CONVEYOR BELTS, for waste material and more, sturdy steel structure, constructed in a workman like manner, Italian quality and components, can be lined in PVC, RUBBER or SHUTTER TYPE BARS, Can be prepared and fitted for METAL DETECTORS, and completed with OVERBELT METAL SEPARATORS, Size and characteristics bespoke to the project., Just fill your enquiry with the following data:, - Materials to be transported (photos appreciated), - Quantity in Tons/h, - required working width, - total length, - horizontal length, - diagonal length, - heigh of discharging point, - if prepared for metal detecto, - if fitted with metal detector (in this case, please add maximum contamination size), - if positioned in covered/uncovered place, We will send you a most targeted offer.
General SKU204X025 LocationBarneveld MakeAarding / Entecon TypeAMC Aero Mechanical Conveyor” No.06007 C3 Year of constructionUnknown Main Features Motor2.2 KW Length5000 mm Inlet diameter75 mm Specified Features - Vertical screw conveyor MaterialStainless steel Vertical conveyor screwcheck Floveyor (1x) Diameter75 mm Length5000 mm Inlet200x200 mm OutletDia. 200 mm Motor2,2 kW, 400/690 volt, 1410 rpm Information Floorspace5,8x0,8 mVertical screw conveyorsAarding EnteconConveying systems > Vertical screw conveyorsBrand > Aarding Entecon What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU312W1579 LocationBarneveld MakeAnlagenbau Stampfer GmbH TypeAS-WRB-1000 Mach.No.144.0002 Main Features Motor2.2 KW Length4829 mm Width1637 mm Specified Features - Conveyor belt MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Conveyor beltcheck Belt width1637 mm, (1000mm) Belt lengthTotal ca. 11,466 m With motor2,2 kW, 290/500 volt, 1405 rpm Belt speed47 rpm Information Year of construction2014 Total height1,0 m CEcheck Floorspace11,4x1,6 m Weight5500 kg Extra Specificationsbelt rolls HDPEConveyor beltsStampfer HaanConveying systems > Conveyor beltsBrand > Stampfer Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...
General SKU312W1580 LocationBarneveld MakeAnlagenbau Stampfer GmbH TypeAS-RB-1000 Year of construction2014 Main Features Motor2.2 KW Length4829 mm Width1637 mm Specified Features - Conveyor belt MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Conveyor beltcheck Belt width1637 mm, (1000mm) Belt lengthTotal ca. 4,829 m With motor2,2 kW, 290/500 volt, 1405 rpm Belt speed47 rpm Information Floorspace4,8x1,6 m CEcheck Total height1,0 m Weight1479 kg Extra Specificationsbelt rolls HDPEConveyor beltsStampfer HaanConveying systems > Conveyor beltsBrand > Stampfer Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU312W1494 LocationBarneveld CEcheck MakeAnlagenbau Stampfer GmbH Main Features Motor2.2 KW Length11466 mm Width1637 mm Specified Features - Conveyor belt MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Conveyor beltcheck Belt width1637 mm, (1000mm) Belt lengthTotal ca. 11,466 m With motor2,2 kW, 290/500 volt, 1405 rpm Belt speed47 rpm Information TypeAS-WRB-1000 Mach.No.144.0001 Year of construction2014 Floorspace11,4x1,6 m Total height1,0 m Weight5500 kg Extra Specificationsbelt rolls HDPEConveyor beltsStampfer HaanConveying systems > Conveyor beltsBrand > Stampfer Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...
General SKU204X026 MakeEntecon Ltd UK TypeAMC Aero Mechanical Conveyor LocationBarneveld Main Features Motor2.2 KW Length5200 mm Inlet diameter75 mm Specified Features - Vertical screw conveyor MaterialStainless steel Vertical conveyor screwFloveyor (1x) Tube-modelcheck Diameter75 mm Lengthapprox 5200 mm Inletdia. 200 mm Outletdia. 195 mm Motor2,2 kW, 220/380 volt Information No.02-C3S-5446 Year of construction2002 Floorspace6,50x0,60 m Total height0,80 m Weight250 kgVertical screw conveyorsEnteconConveying systems > Vertical screw conveyorsBrand > Entecon What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU204X024 LocationBarneveld CEcheck Main Features Motor2.2 KW Length6500 mm Inlet diameter200 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Tube-modelcheck Diameter75 mm Length6500 mm Between inlet and outlet6500 mm With hoppercheck dump cabinet Inlet200x200 mm OutletDia. 200 mm Motorcheck 2,2 kW, 230/400 volt, 1430 rpm MaterialStainless steel 1.4301 (304) Information MakeWysetech No.18174 Total height7,0 mVertical screw conveyorsWysetecConveying systems > Vertical screw conveyorsBrand > Wysetec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU271X310 MakeLiftVrac Mach.No.1401 Year of construction2014 Main Features Motor1.5 KW Length6000 mm Width350 mm Specified Features - Conveyor belt MaterialStainless steel Elevator beltcheck Trough type conveyor beltcheck Belt width350 mm Belt length6000 mm With motor1,5 kW, 380-415 volt, 1485 volt With variable speed drivecheck Belt speed57 rpm Outlet height1600 mm Information LocationBarneveld Inclined on framecheck Mounted on wheelscheck With switchcheck Floorspace6,20x1,50 m Total height2,40 m Weight700 kg CEcheckConveyor beltsLift VracConveying systems > Conveyor beltsBrand > Lift Vrac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for man ...
used
Manufacturer : IMRO Year of Manufacture : 2020 Belt Width : 1,200 mm Axle Spacing (Length) : 10,980 mm Drive Motor : 3.0 kW, 230/400 V, 50 Hz, IP54, 32 rpm Drive Type : Mounted geared motor Belt Type : EP 400/3 3:0 mm Side Guides : 250 mm Weight : 2,700 kg Find more here - / Contact us at -
Flat conveyor belt on aluminium substructure Length of the carrying strap 260 cm, width of the carrying strap 60 cm With the regulation of the amount Conveyor belt mobile, on wheels
Conveyor belt No.01 Dimensions (L × W): 5 m × 0.70 m Conveyor belt No.02 Dimensions (L × W): 6 m × 0.70 m
IBS belt conveyors are designed for efficient, reliable, and continuous transport of concrete, stone, gravel, and other bulk materials in demanding working conditions. Thanks to their robust construction, high-quality components, and modular design, the conveyors provide a long service life, easy maintenance, and a high level of operational flexibility. The structure is made of high-quality steel, while all parts are powder-coated, ensuring high resistance to corrosion and weather conditions. Conveyors are produced in standard lengths of 5 m, 8 m, and 11 m. The standard belt width is 800 mm, while other widths and lengths are available upon special customer request. The belt speed can be fixed or optionally adjustable through a speed control system. Additionally, the conveyors can be equipped with a water supply pipeline, allowing water to be added directly at the conveyor dischar ...
used
AIR TEMP.: 600 °C, 2 CHAMBERS, SLAB DIM.: 1.54 x 3.0 x 0.35 M - W x L x T
Dodmores Vibratory conveyor Serial: 30520 Stainless frame, 50Kg stainless hopper, overall length 2200mm, vibratory conveyor dimensions 2000mm x 600mm, mobile, 1Ph
REF-2368 HOBART CNA-L CONVEYOR RACK-TYPE DISHWASHER Conveyorized rack-type dishwasher. Manufacturer: HOBART. Model: CNA-L. Serial no.: 86463655. Year: 2007. 26.30 kW/50.30 A. 380-415 V/50 Hz/3-phase. Throughput: 180 racks/3,240 plates per hour (120 racks according to DIN 10510). Complete with HOBART heat pump. Pump model: CHP 18. Serial no.: 692. Year: 2007. Refrigerant type: R134a (capacity 3.2 kg). Maximum pressure: high side 28 bar; low side 8 bar. Compressor: maximum flow rate 17 m3/h; 2,900 rpm. Inside dimensions: width 510 mm, height 460 mm. Overall dimensions: length 3,200 mm, width 800 mm, height 2,150 mm. With large” high-performance pre-wash zone, as well as washing, rinsing and drying zones. Made of high-grade stainless steel. SMARTRONIC electronic control. Including 2 speeds, emergency stop and main switch. Efficient dual-rinse system. In-buil ...
liquid conveyors lubrication unit for 5 Tetra Pak lines, excellent condition
NNP Vibratory conveyor Stainless frame and conveyor, conveyor dimensions 2500mm x 1150mm, height adjustable frame, 3Ph
Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters
Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves
Tetra Pak conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 meters with engines, straight pieces and curves Subject to prior sale
We offer, used: Polyketting Conveyor belts - transport tracks with frequency-controlled / frequency converters on the motors for Tetra Pak beverage cartons 19 frequency-controlled motors More than 100 meters of transport track Subject to prior sale
approx. 3x belt curves, VanRiet, 45 degrees, driven – used - Price per piece ex location (net): 1.450.-€ (net)incl. loading Manufacturer: VanRiet Type: Belt Conveyor Curve Year of Make: 2017 Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony
Min. 4x belt curves, VanRiet, 90 degrees, driven - used - Price per piece ex location (net): incl. loading Manufacturer: VanRiet Type: Belt Conveyor Curve Year of Make: 2017 Condition: good – very good Available: immediately Location: Frankenberg camp / Saxony No. 2 + 3 – 2.950.-€ (net) Element width: approx. 1.42m Belt width: approx. 1.20m Height incl. feet: approx. 61cm. Radius: outside / outside approx. 4.70m Voltage: 230/400 V, 50Hz, 4.75A, 3kW No. 21 + 23 – 2.950.-€ (net) Element width: approx. 1.42m Belt width: approx. 1.20m Height incl. feet: approx. 61cm. Radius inside / inside approx. 2.20m Voltage: 230/400 V, 50Hz, 4.75A, 3kW
maximum number of results exceeded
please refine your search
