ban saw used for sale

with pre- and attached roller raceway and frame shelf

Offer 26098 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° to : around 130 mm - Square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade infinitely variable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydr. Material vise, infinitely adjustable clamping pressure - Hand crank for fine adjustment - Restraint adjustable - Coolant device - Discharge roller conveyor with dimension stop 5000 mm - Feed roller conveyor 4000 mm - Space requirement approx. W 800 x H 1770 x D 1020 mm - Weight approx. 950 kg

Key data: 4400 mm, 75 mm

TECHNICAL DATA: Cutting length: 4400 mm Slide stroke: 4300 mm Saw blade protrusion: 90 mm Usable cutting height: 75 mm Saw blade: Ø 330 mm Equipped with scorer: 1.25 kW Main motor: 7.5 hp Control: GVision 2009 06 Collets Collet opening: 115 mm EQUIPPED WITH: 04 Air curtain tables (AIR flow) 01 Fan

1 piece EISELE PSU 450 H metal circular saw Technical data: Saw motor ‐ variable speed by pole switch Gearbox Max. saw blade diameter Ø 450/40 mm, thickness 4 mm (HSS) Clamping cylinder ‐ vertical Long stroke ‐ horizontal Clamping pressure adjustable Operating pressure Mitre cuts Machines ‐ Dimensions W/H/D D=100 x 160 mm D=50 x 8 mm 30 bar. 50 bar. 30°/45°/90°/45°/30° 1000/1860/1330 mm

An old segment cold circular saw Wagner Reutlingen is available. Series: 1, roller conveyor length: 4500mm, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, weight: approx. 3000kg. An on-site inspection is possible.

Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible.

Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station

Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor

Auction-ID: A7-45452-17

Auction-ID: A7-45452-5

Key data: 45 °, 3000 mm, 1100 mm

MARTIN T74 Classic YOC 2007 Main sawing unit: 5.5 kW Rated current: 22 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 – 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Rip fence can be lowered manually max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor 5.7" touchscreen control Digtial length stop Parallelogram cross table with digital display Main Saw Blade Change: ProLock Central lubrication Compressed air supply required Operating hours read: 596 h Extraction connection: 120 + 100 mm Weight: approx. 1900 kg

Casolin sliding table machine mod. Used Astra DGT with digital parallel guide control Carriage mm 3200 with sliding on 8 rollers Blade diameter max mm. 400 Engraver with independent motor and electro-pneumatic start-up intervention Maximum opening parallel guide mm 1300 with controlled axis Automatic star/delta blade motor start Installed power 4.5 Kw Possibility of removing the parallel guide by unscrewing a single knob Parallelogram protection rotation for passage of tall workpieces Year of manufacture 2004 CE compliant

Pull, cross-cut and mitre saw FESTOOL KS 120 EB year 2011, blade ø 260/30 mm, S/N 10763964, 1,600 W, w. 2 roller raceways metal, each approx. 160x45 cm, roller block

Double mitre saw HAFFNER DGS 188 built in 2011, blade ø approx. 400 mm, machine length approx. 600 cm, 400 V, max. 6 bar, S/N 11003

Vertical panel saw HOLZ-HER 1270 Automatic built in 1987, machine no. 262/8-75, machine width approx. 500x210h cm

Table saw MAFELL Monika-K 1992, S/N 218489

Mobile circular saw MAFELL Erika 60 E built in 2011, 1,300 W, S/N 0988734

Cross-cut and mitre saw METABO KGS 216 M, blade size max. 216 mm, S/N 6017897464

Sliding table saw ALTENDORF F45 EvoDrive year 2023, blade max. 450 mm, 7,208 kVA 400 V, S/N 230112016, digital display, control ALTENDORF, double mitre gauge Altendorf Duplex

Circular saw blades div. approx. 30 packs, partly used, partly as good as new, partly sharpened, partly unsharpened, w. wooden shelf

Table saw GÜDE TK 2400 ECO

Mitre saw STAYER SC 250, 220 V. 1,200 W

Electric Saw METABO PsE 0525, Plastic Case

A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Cutting stroke 500 mm Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-15

OMGA TR2A double miter saw: – useful opening 2800mm – adjustable blades D=300mm – total power kw 3.2, volt 380 Machine not CE compliant, for export

Excellent condition - Fully operational - Loading / Transport possible! hood for miter cuts, 2cnd longitudinal fence and hold-down

saw blade diameter: 400 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: flat: mm turning speeds: 1400 / 2800 U/min engine output: 4,0 kW weight of the machine ca.: 180 Kg dimensions: 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Excellent condition - Fully operational - Loading / Transport possible! Cutting length approx. 3200 mm, program slide travel max. approx. 2500 mm, with 5 stops, angular back fixture, cutting height approx. 50 mm, diameter main saw blade approx. 300 mm, scoring saw blade approx. 150 mm, motor main saw 5,5 kW, scoring saw 0,55 kW, saw carriage feed approx. 6 to 32 m/min, return approx. 32 m/min, slide approx. 0,8 m/min and 14 m/min, control TRIA 460, 3 air cushion tables approx. 1830 x 610 mm, length stop at the 1. air cushion table.

Excellent condition - Fully operational - Loading / Transport possible! saw blade diameter max 500 mm speeds 2000 to 6000 1/min cutting length 5,000 mm guide slot width of the riving knife 13 mm voltage 400 V current 35 A frequency 50 Hz main motor make ATB type YAF 112 M/21-11 power 5.5 kW digital length stop scoring saw saw blade diameter 120 mm diameter of the tool holder 22 mm scoring motor make ATB type MAF 80/2 A-11 power 0.75 kW , 8200 1/min includes vacuum table and 2 pcs. Laser splitting wedge Altendorf 3 pcs insertion protection Altendorf Leitz throat milling disc

Offer 26120 Technical data: - Saw blade diameter approx. 500 mm - Saw blade speed 2800 rpm - Cutting range, e.g. up to approx. 180 x 150 mm - 150 x 200 mm - Feed length at 90° cuts 5 - 600 mm - Bevel cuts up to 45° possible - Compressed air connection 7 bar - Air consumption per work cycle without / with spraying 50 / 64 l - Drive 400 V / 4.0 kW - Space requirement approx. W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - with: - Digital display - Pneumatic vice - Automatic switch-off at the end of the profile

Kaltenbach, HCM 750, Cutting area: dia. 220mm, U/I beam : 400 x 150 , Feed rate: 0- 500mm/min , Drive motor: 5HP, 1700kg, sgt. Condition.

For cutting in vertical and horizontal position Heavy duty machine with a welded steel frame Automatic folding chassis for avoiding contact of the PVC slats with the saw, during horizontal cutting. Underlying support in aluminum with folding rollers for easier movement of panels. Manual movement of the pressure bar and carriage for vertical and horizontal cuts. The latter are mounted with 6 points on the batti. Adjustable cutting depth Automatic folding chassis : electric. Support 4680 mm divided into 2 parts for use of small panels 4 mechanical stops for horizontal cuts 2 stops for vertical cuts Extra stop for vertical cuts Device for repetitive horizontal cuts Folding rollers Brake motor Maximum cutting length: 5300mm Max vertical height: 2200mm Max horizontal height: 2100mm Max cutting depth: 80mm Power of Motor: 5.5kW Saw blade diameter: 300mm Saw blade speed: 5000r/min

Excellent condition - Fully operational - Loading / Transport possible! cutting length: 4300 mm cutting depth: 4250 mm Saw Blade Protection: 80 mm clamps piece: 6 (75 / 275 / 475 / 1050 / 1850 / 3450) piece Main saw blade: 350 mm Scoring Saw Blade: 180 mm saw carriage speed forward: 1 - 150 m/min saw carriage speed reverse: 150 m/min program fence speed forward: 90 (EU max 25) m/min Program Fence Speed Reverse: 90 m/min Air table: 4 x (2240 x 770 mm) Main motor: 13.5 kW scoring saw: 2.2 kW control: PLC software: CADMATIC 4.1 PROFESSIONAL total power approx: 20 KW

Automatic panel sizing beam saw with rear lifting table Max panelsizes when rear loading: 5600mm x 2240mm Max. cutting length x width: 5600 x 5600 mm. Max. stack weight for the lift: 10 ton max stack height 580 mm Saw blade outstand: 125mm Main cutting motor 13,5 kW Sawblade diameter 450 mm. Scoring saw motor 2,2 kW Feed speed of the saw carriage, forward 5 to 150 m/min, return 150 m/min Speed of the pusher 80 m/min Number of grippers: 9, centers 75/275/475/1075/1775/2475/3275/4075/4875 mm. 5 air flotation tables in the front 2810 x 650 mm Controlls: CAD-matic 4.0

Floor Pull Saw MAFELL Erika 85 Ec Year 2015, S/N 1114276

Cutting capacity: 4300 mm x 4300 mm. Sawblade height: 125 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 1-150 m/min. Returnspeed 150 m/min. Programm fence speed: 90 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1075/1825/2625/3425 mm. Machine control: CADmatic 4 ? Professional Hardware: Windows XP (US) TFT display Software showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.

Cutting capacity: 4300 mm x 4250 mm. Sawblade height: 95 mm. Main motor 13,5 kW / scoring motor 2,2 kW Saw-carriage speed: 5-130 m/min. Returnspeed 130 m/min. Programm fence speed: 80 m/min (limited to 25 m/min) 7 grippers, centers 75/275/475/1050/1850/2650/3450 mm. Machine control: CADmatic 4 air tables of 2160 x 650

Eisele Cold Circular Saw, BJ. 1968, Machine No. V19104

Band Sawing Machine MEP SHARK 260, Information about technical data are not binding., Machine available subject to prior sale., Max cutting capacity Ø: 220 mm, Max cutting capacity: 260x200 mm, Blade dimension: 2750x27x0,9 mm, Band speed range: 36 - 72 m/1, Blade motor power: 1,5 - 1,8 Kw, Working plane height: 950 mm, Weight: 370 Kg

Excellent condition - Fully operational - Loading / Transport possible! Main Blade Saw: motor power 5.50 KW, 3 speeds: 3000/4000/5000 rpm, maximum diameter 400 mm, inside diameter 30 mm, tilting 0°- 45° Scoring unit: motor power 0.75 KW, speed 8500 rpm, diameter 120 mm, inside diameter 20 mm Carriage dimensions 3200 x 330 mm Table dimensions (long x width) 1040 x 630 mm Maximum cutting width on parallel fence approx. 1350 mm Maximum cutting length approx. 3200 mm Max. cutting height to 0°: 130 mm, max. cutting height to 45°: 92 mm Automatically controlled functions: blade saw tilt and blade saw height Dimensions for transport 3600 x 1600 x 1700 mm

Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine.

Mitre saw FESTOOL KS 120 EB year 2013, max. 260/30 mm, S/N 40038841, w. wooden base, roller track approx. 200x30 cm

Circular Metal Saw manufactured in 2017. This Imet VELOX 350 AF-ENC features a saw blade diameter of Ø350 mm and a spindle speed of 3600 rpm. It includes an electronic feed control for programming length and quantity, along with an extraction system and a roller conveyor for 6m profiles. If you are looking to get high-quality cutting capabilities, consider the Imet VELOX 350 AF-ENC machine we have for sale. Contact us for further details.

Circular saw or designation, nameplate n. found

Alligator Saw DEWALT DWE397 QS, Type 1, 1,700 W

Circular Metal Saw manufactured in 2009. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details.

Circular Metal Saw manufactured in 2007. This KALTENBACH KKS 400 E features a saw blade diameter of 400 mm and offers infinitely variable feed speed rates up to 1000 mm/min. The machine has a robust weight of 820 kg and dimensions of 800 x 1070 x 1780 mm. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH KKS 400 E machine we have for sale. Contact us for further details.

Table saw manufactured in 2014. This Altendorf F45 features a sliding table length of 3000 mm and a cutting width of 1300 mm. It is equipped with a powerful 5.5 kW main motor and a maximum saw blade diameter of 550 mm. The machine includes a swivel-mounted control panel at eye level and a rip fence for precision cutting. If you are looking to get high-quality cutting capabilities, consider the Altendorf F45 table saw we have for sale. Contact us for more information.

CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details.

Panel saw manufactured in 2012. This SCHELLING FH 4 features a nominal cutting length of 4250 mm and a maximum saw blade diameter of 350 mm. It offers a feed speed of up to 80 m/min and is equipped with an ARDIS software package for enhanced functionality. Includes a storage grundner. If you are looking to get high-quality panel cutting capabilities, consider the SCHELLING FH 4 machine we have for sale. Contact us for further details.