ball mill for used for sale

Used Koppens forming, buttering and predusting line is a great solution for every production plant who is specialized in making meat burgers. The line consists of Koppens VM 600HD EasyFormer, Koppens ERT 600 wetcoater with mixer and Koppens Optiflour preduster. The complete line allows to form meat burgers and cover it with coating both wet and dry (flour/flour with spices) Belt width: 600mm Efficiency: up to 50 strokes/min

Wire diameter: 16mm, number of stations: 5, length: 6700mm, width: 3800mm, height: 3050mm, including sound-proof cabin, straightener, chain hoist, sorting trough, dosing machine, oil mist separator and additional accessories.

Handtmann Sausage linking machine (2007) Good condition

Thermal VLF CTP Avalon N16-50 XT 510,000 plates produced Year : 2013 with MAL 16000, year 2009 with Processor Quartz III 125 with Stacker NO RIP

Max. hydraulic pressure: 400bar.

Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024.

Voltage: 220/ 380V, nominal current: 8/ 5A.

Bear weight: 1t, max. impact energy: 27kJ, stroke rate: 95/min, max. stroke: 950mm, working height: 800mm, drop face dimensions: 365x180mm, connected load: 75kW, length: 4125mm, width: 1500mm, height: 3662mm, weight: 20t, with documentation, on-site inspection is possible.

Bear weight: 400kg, lifting speed: 125/min, connected load: 30kW, with documentation, an on-site inspection is possible.

Bear weight: 500kg, lifting speed: 120/min, connected load: 45kW, with documentation, the scraper is defective, the dovetail is broken, an on-site inspection is possible.

Bear weight: 300kg, lifting speed: 130/min, with documentation, an on-site inspection is possible.

Crane arm for forklift STABAU Type KR 15 Fabr. No. 003-14276 Year of construction 1986 Nominal load 1500 kg load capacity at 450 mm radius 1500 kg load capacity at 750 mm radius 1100 kg load capacity at 1200 mm radius 750 kg Suitable for fork carrier FEM 2 = 403 mm Load hook adjustable in 6 steps Total height of the crane arm 1350 mm Boom profile 110 x 110 mm on mobile transport frame good condition; used

Machine was overhauled, including moulds and tools.

Tilting container, tipping container for forklifts Chip bucket - Hopper - Folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry bracket: 230 x 110 mm Tine distance inside/outside: 160/600 mm- manual tilting device via hand lever - 4 pieces plastic fixed castors 175 and, 2 pieces steerable- foldable trailer drawbar - drive-in bracket/forklift holder Net weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm good condition Suitable for collecting, storing and transferring recyclable materials; used

Electrohydraulic scissor fork stacker Lift truck, pallet truck for pallets TOYOTA / BT type HTH 10 E Fabr. No. 481795 Year of construction 2005 Load capacity 1000 kg Lifting height max. 800 mm Height drained 85 mm Fork length 1190 mm - Electric lift over 12 volts Battery operation - manual stroke via hand lever as in the pallet truck - TOYOTA Industrial Equipment Europe SARL (Made in France) - Long-stroke hydraulic cylinder - with single roller - integrated charger (mains voltage 230 Volt, with IEC plug) Net weight 140 kg good condition; used

Electronic crane scale MWT Type 142 Fabr. No.: 142571 Year of construction 1993 Traction measuring device, crane scale Measuring range: 2,500 to 80,000 kg Smallest measured value: 20 kg Power supply via 12 volts Battery suspension shackle for double hooks, anchor hook operation, storage of measured values and tare via remote control - Memory for measured values (weights) - Printer for measured values very solid and high-quality body made of steel Net weight: approx. 200 kg ; used

Compressed air supply: 6bar, connected load: 14.7kW.

Number of lanes: 2, bag width: 12-50mm, bag length: 20-200mm, max. sealing force: 1000N, max. throughput: 2x 100 bags/min, weight: 1t, operating hours: approx. 3500h, with integrated belt checkweigher Wipotec-OCS HC-A-2000-2-2-track and counting and grouping system Merz KT-160.

There are two identical vertical bag filling machines available, weight: 1.1t.

Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130.

Electric forklift JUNGHEINRICH type EFG 216 Serial No. FN413671 Year of construction 2011 Load capacity 1600 kg Lifting height 4800 mm Fork length 1220 mm Fork carrier width 980 mm Construction height 2120 mm Operating voltage 48 Volt- Triplex mast with full free stroke 1550 mm - hydraulic side shifter - 2 travel speeds - Battery from year of construction 2015, type 06 EPZS C750 SC (48 Volt, 750 Ah) - Automatic charger, 48 Volt - 3-wheel solid rubber - Tyres front 18 x 7-8, rear 140/55-9 - according to operating hours counter 14725 operating hours read - Auxiliary steering - Work lights front - New TÜV - UVV inspection Length without forks 2000 mm Total width 1080 mm Net weight without battery 2390 kg Net weight with battery 3480 kg ; used

Filling format: 70-150g, forming shoulder format: 120/ 140mm, with three forming sets and multi head scale.

Product dimensions: 650-1200x300x240mm, roll width: 800mm, roll diameter: 350mm, max. speed: 50 cycle/min, length: 5170mm, width: 1452mm, height: 1435mm, weight: 1.1t, one band is torn and needs replacing.

Max. speed: 90 bags/min.

Was used for filling 1l milk bags, output: 1000l/h, the electronics of the machine was overhauled.

Was used for filling 10l milk bags, there is a second machine as a source for spare parts available.

Compressed air supply: 6bar, connected load: 7kW.

Working height: 820-900mm, max. film width: 550mm, output: 60 cycles/min, product width: 25-450mm, product height: 2-200mm, product length: 80mm to unlimited, connected load: 3kW, length: 2140mm, width: 1450mm, weight: 650kg, with documentation.

Max. Output: 300cycles/min, max. stacking speed: 30packs/min.

Type 5 Nominal weight of falling parts 1750 kg Impact energy, not less than 4878kgm Number of strokes per minute 85 Max. ram stroke 890mm Diameter of ram 455mm Ram pallet face 405x305mm Anvil pallet face from floor 535mm Height above floor 4040mm Baseplate 4405x2085mm Motor rating 110 kW Weight 40000kg Weight without anvil block 25000kg

Output: 21 bags/min, the screen is defective.

Product width/ height: 20-400/ 200mm, max. output: 60 cycle/min.

Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR

Max. output: 10,800 cups/min, cup format: 2x3, with documentation, film transport, main filler, laminar air over the entire filling line, laminar tunnel from the moulded part to the film lift with laminar box, die cutter with spare die cutter, packer, Mettler-Toledo weighbridge, outfeed and high stacker, regularly overhauled.

Hopper capacity: 80l, starting width: 200-230mm, connected load: 1kW, length: 4500mm, width: 1100mm, height: 1733mm, weight: 1.1t.

Producer: HUTA ZYGMUNT, Model: MPM 6300B, Origin: Poland, New in: 1978, Force: 2500 kGm, Stroke of ram: 850 mm, Space between shears: 650 mm, Length of die seat in ram: 650 mm, Length of die seat in cushion: 900 mm, Max. weight of top die: 800 kg, Min. die height: 300 mm, Strokes/min: 100,

Resolution: 1440dpi, working width: 1600mm, number of colors: 4, length: 2698mm, width: 845mm, height: 1600mm, weight: 182kg.

A large format plotter ROWE RCS 6000-4 with a longitudinal and cross folding system ROWE ROWEFOLD 721-4 and a sorter, counter reading: 170,000 linear meters/ 97,000m².

Load capacity: 2500kg, unladen weight: 4115kg. The forklift is still in use and in perfect condition.

One forklift including charger. Operating hours: approx. 22000h. Battery defective. Documentation available.

Lifting capacity: 2500kg, lifting height: 5000mm, fuel: gas, operating hours: 19621h, weight: 3865kg.

Max. total load: 5t, weight: 8.89t, without accessories, spare parts or documentation, was maintained regularly.

Load: 1.1t, battery weight: 1.065-1.175t, motor power: 5kW, weight: 4.14t, operational hours counter: 2580h.

Including battery charger.

The hydraulic brake with the valves have been renewed, the control unit of the lifting mast, control lever for lifting, lighting system repaired, the drive battery 80 V is no longer new but can still be used for normal use, the attachment including fork positioner has signs of wear, the current failure of the attachment has to do with a cable break in the rear control area, with cab and charger, UVV and maintenance up to date.

Max. load: 910kg, weight: 2.93t.

Nominal load: 8t, weight: 12.3t, operational hours counter: 5166h, including three meter long forks, without documentation.

Max. load: 5t, lifting height: 4100mm, installation height: 2971mm, free stroke: 150mm, tires: Super Elastik solid rubber 300-15, Super Elastik solid rubber 250-15, operating hours: 15,200h, with overhead guard SDFHT full cab, heating and air conditioning, double auxiliary hydraulics and pallet clamp Meyer, an on-site inspection is possible.

Load: 2.5t, lifting height: 3220mm, length: 2262mm, width: 1199mm, height: 2230mm, weight: 4.4t, an on-site inspection is possible.