ball mill for used for sale

Technical data Manufacturer: MAHLO Type: FU 1300 Machine number: 2257 Voltage: 220–380 V / 50 Hz Clamping surface: 1300 x 300 mm T-slots: 5 (spacing 60 mm) Travel (X/Y/Z): 950 / 275 / 500 mm Spindle holder: ISO 40 Speed range: 30–1200 rpm Weight: approx. 1750 kg Configuration Accessories: 1 HILMA machine vice, 1 RÖHM four-jaw chuck, diameter approx. 200 mm Application: General milling work in tool and mechanical engineering

Machine hours reading approx. 80,276 hours, spindle hours reading approx. 23,414 hours. Equipped with: 5-axis milling head type VH30 with A- and C-axis (A-axis ±110°, C-axis 360°), suitable for simultaneous 5-axis milling. Equipped with high-frequency spindle with HSK 63A mount, max. speed 22,000 min⁻¹, power 60 kW (constant from approx. 6000 min⁻¹) and max. torque approx. 95 Nm. Automatic tool changer KTC Handlingstechnik, type: ATC 60/HSK-A63 (60 positions) with carousel magazine. Includes chip evacuation and peripherals consisting of: (1x) KÜMA refrigerant/filter system type KF1/515WB, (1x) KÜMA filter unit type BF Gr.3, (1x) KÜMA pump unit type FA10/03, (1x) H.I.B Systemtechnik industrial chiller type RKH/W-14300 (R134a), (1x) LTA Industrial Air Cleaning oil mist extraction type AC 2000 H Solid. Suitable for high-speed processing of aluminum and composite, amon ...

Serial number: 07400003691 operating hours read: 88,040 Spindle hours read: 43,558 Spindle speed range: 3200/5000 rpm Rotation diameter: 270 mm Turning diameter: 120 mm Spindle distance: 900 mm Travel X1: 290 mm Travel Z1: 650 mm Travel X2: 180 mm Travel Z2: 650 mm Travel Y1: +- 40 mm Travel Z3: 670 mm Travel X3: 175 mm Max. rod diameter: 100/104 mm Spindle bore diameter: 118 mm Rapid traverse speed X- and Z-axis: 30 m/min Rapid traverse speed Y-axis: 15 m/min Number of driven tools per tool carrier: 12 Control: SIEMENS SINUMERIK 840 D POWERLINE incl. chip conveyor with 2 tool turrets - each with 12 tool positions main and counter spindles, as well as foot switches Attention, the machine has the following defects: -the B-axis is defective (sits on turret 1) -the guides and drives are worn according to their age-X2 axle (guide rails) runs a bit crooked in the range of 0.03 mm (would have  ...

Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. Powerful 2-speed engine. Left/Right Switch Head swivel left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. Spindle protection. incl. toolbox with various tools Drilling capacity in steel30 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 565 mm Table adjustment longitudinal 220 mm Table clamping area 840 x 210 mm Connection voltage 400 V max. distance between work table and spindle nose max. 470 mm Total power requirement 1.1 kW Machine weight approx. 230 kg Space requirements approx. 0.75 x 1.05 x 1.3 m Condition: never used / new (5)

Drilling/milling machine with: • Drilling capacity 40mm • Milling capacity 32mm • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 730 x 210 mm Connection voltage 400 V Drill feeds: 0.1 - 0.18 - 0.26 mm/rev Total power requirement 1.1/1.5 kW Machine weight approx. 0.35 t Space requirement approx. 0.8 x 0.75 x 1.85 m Condition: never used / new (5)

Serial number: 4432 Operating voltage: 380 V Frequency: 50 Hz Rated current: 13 A Speed: from 40 to 2000 rpm Tool holder: SK 40 Feed range infinitely adjustable: 5 - 500 mm/min Creep traverse: 4 mm/min Rapid traverse: 1200 mm/min Table Longitudinal movement: 300 mm Spindle block Transverse movement by hand: 160 mm Support Vertical movement motorized: 280 mm by hand: 290 mm without protective bar: 330/340 mm Vertical milling head on spindle block can be moved by hand: 100 mm Table dimensions: 600 x 210 mm with 4 grooves and an attached vice, jaw width: 160 mm

Drilling and milling machine with Powerful 2-speed engine. Recording MC 3 - B16. Drill chuck 3 - 16 mm. Left/right switch. Spindle protection. Fine tuning. Ejection wedge. Clamping threaded rod for tool Related tools. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 425 mm Table clamping area 700 x 210 mm Connection voltage Vmax. Distance between work table and spindle nose 470 mm Total power requirement 1.5 kW Machine weight approx. 230 kg Dimensions approx. 0.75 x 1.05 x 1.2 m Condition: never used / new (5)

- – (manufacturer Kern) The 2-roll mill from (built in 2018) is ideal for dry grinding barley malt. The rollers can be precisely adjusted via . . and are driven by a . via a V-belt. The mill stands on a sturdy tubular frame and is equipped with a feed hopper, protective grille, bagging spout, and bag buckle. In addition, the machine is supplied with a plate scale from the manufacturer Kern, which offers a weighing range of up to 150 kg and has a readability of 20 g (bottom) and 50 g (top). With compact dimensions of 1250 mm in length, 1750 mm in width, and 1670 mm in height, as well as a weight of 124 kg, this mill is ideal for small to medium-sized breweries or laboratory applications. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 2-roller mill for dry milling, Capacity: 600 kg/h, Adjustable cracking clearance: 0.2 to 4.5 m ...

This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features full 5-axis simultaneous machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine includes a robust tool magazine capacity of 72 positions and is equipped with both main and second spindles for enhanced capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX i-200 S turn-mill centre. Contact us for further details.