baling used for sale

Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible.

Specifications Maximum pressure: 60 tons Power supply: 400 V/ 7.5 kW Press force: 6.25 kg/cm² Year of construction: 2010 Bale size: 1200x800x1100 mm Price: on request Bale weight: approx. 340-500 kg Machine is fully functional, after technical supervision. If you have any questions, please call us at +48 696 072 985

Technical data: Maximum pressure: 60 tons Year of Make: 1999 Press force: 72.7 t/cm² Number of Bindings: 4 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1400 mm Bale weight: 450-650 kg Weight: approx. 20 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance If you have any further questions about this or similar channel balers, please do not hesitate to contact us by email or phone!

automatic baler Manufacturer: UNOTECH Type: UPAMAT 130 H5 Year of construction 2025 Operating hours: approx. 1,300 h Technical data: Press force: 1,200 kN / 315 bar Specific pressing pressure: 10.00 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 1,100 x 1,100 mm (H x W) Bale weight: 800 - 1,100 kg (depending on material and bale length) Binding: 5 times horizontally seen in the direction of pressing on the right side Drive power: 1 x 75 kW Oil tank volume: 2,400 litres incl. oil drip pan and leak oil warning device Volume output: - at idle approx. 920 m³/h - Under operating conditions: approx. 410 m³/h Weight output depending on the bulk material: - For 20 to 30 kg/m³ bulk density: approx. 12 t/h - For 30 to 50 kg/m³ bulk density: approx. 20 t/h - At 60 kg/m³ bulk density approx. 24 t/h - At  ...

Waste press Strautmann RC 1100TT after renovation Specifications Maximum pressure: 4 tons Use for: 1100 L Power supply: 230V/1.5 kW Year of construction: 1996 Price: on request If you have any questions, please call us: +48 696 072 985

Hello, We hereby offer you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Hours 15606 Hours Press force main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm approx. 6.7 t/hour Machine weight press 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block replaced) and tested on the fly, in manual and automatic mode. The machine documentation is available in German. A tour of the press is possible by appointment in our workshop. We would be happy if  ...

Cabinet press incl. tilting device Manufacturer: HSM Type: V-Press 860 TimeSave Year of construction: 2021 Specifications Press force: 594 kN Specific pressing force: 63.46 kN/cm² Drive power: 7.0 kW (4.0 + 3.0 kW) Voltage/Frequency: 400 V / 50 Hz Press capacity idle (theoret.): 26.25 m³/h Bale dimensions: 1,200 x 780 x 1,200 mm Bale weight: up to approx. 430 kg Type of feeding: autom. Lift-tilt device with lattice trolley Machine dimensions: 2,202 x 3,584 x 3,004 mm (W x D x H) Binding: manual with quick-link wire Suitable for: cardboard + mixed paper

automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t

Baler Paal Konti 325 D/SO, built in 1999 Technical data: Manufacturer: Paal Type Paal Konti 325 D/SO Built in 1999 Hours: 50702 Press force 94 t Drive power: 2 x 45 kW Total connection 104 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex wor ...

For sale is a fully operational, industrial-grade Lindemann SAS 1000 three-dimensional baler, offering reliable performance for scrap metal processing applications. Key Technical Specifications: Type: Lindemann SAS 1000 (Three-dimensional baler) Year of Manufacture: 1993 Drive System: 2 x 90 kW electric motors Cycle Time: 30 seconds Bale Size: 30 x 30 cm Control System: Modern touchscreen display Condition and Logistics Options: The machine is in fully working condition and was carefully dismantled solely due to relocation. We offer flexible delivery and handover options tailored to your needs: Standard Option: Provided in its current condition, loaded onto the buyer’s truck. Turnkey Option: Upon request, we can handle transport, professional assembly, and commissioning at the buyer’s site.

Specifications Maximum pressure: 60 tons Press force: 156 t/m² Bale size: 1100 x 1100 x 700 mm Bale weight: 400 kg Power supply: 400V/ 13kW Year of construction: 2014 Dimensions of the tailgate: 2815 x 1085 x 2250 mm Machine weight: 7.5 t The machine is functional

Just Arrived Baler Paal Konti 325 G, built in 2013 Technical data: Manufacturer: Paal Type Konti 325 G Year of construction 2013 Hours: 12110 Press force 100 t Drive power 2 x 55 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Setting 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, w ...

Specifications Maximum pressure: 65 tons Pressing force: 84 tons/m² Duct cross-section: 1000 x 750 mm Bale weight: do 550 kg Power supply: 400 V/ 45 kW Year of construction: 2011 Number of ties: 4 vertical Dimensions of the tailgate: 1400 x 920 mm Weight: approx. 13 tones Bale tying: automatic

Fully automatic baler Manufacturer: PAAL Type KONTI 325 D Operating hours: approx. 22,300 h Year of Make: 1999 Technical manufacturer data: Press force: 94 t at 300 bar Specific pressing pressure: 10.3 kg/cm² Drive power: 2 x 55 kW Total connected load: 150 kW / 280 A Oil tank capacity: approx. 3,100 litres Throughput under operating conditions: approx. 430 m³/h Performance at: 35 kg/m³ bulk density: approx. 14.5 t/h 60 kg/m³ bulk density: approx. 25.0 t/h 100 kg/m³ bulk density: approx. 39.5 t/h Filling opening: 1,020 x 2,000 mm Bale size: 750 x 1,100 mm Binding: 4-fold vertical Machine weight: approx. 28 t Bale weights: 525 to 800 kg including: - Free kicks - Whirlpool can be inserted from the rear

automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t

automatic baler Manufacturer: HÖMA Type: BP 4000 PA Year of construction: 08/1991 Technical Data: Press force: 40 t Filling opening: 1,350 x 820 mm Bale size: 755 x 900 x 600 - 1,200 mm Bale weight: up to approx. 400 kg Setting: 4-fold horizontal Transport dimensions: Length: approx. 5,650 mm Width: approx. 2,200 mm Height: approx. 2,350 mm Weight: approx. 6,180 kg

Technical data press: Manufacturer: Presto GmbH & Co. KG Type CC 36 M Year of construction 2010 Operating hours 3,641 hours Press force main press 36 t Specific pressing force 467 N/cm² Dimensions of the insertion tray 1,080 x 1100 mm (L x W) Cycle time 34 seconds Filling volume / pressing cycle 0.85 m³ Theor. Throughput capacity 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale dimensions 1100 x 750 mm (W x H), length variable Drive power 15 kW Tying 4-fold vertical, semi-automatic, with polyester plastic yarn throughput capacities with a Bulk density of 35 kg/cbm 1.8 t/hour Bulk density of 60 kg/cbm 2.5 t/hour Bulk density of 100 kg/cbm 3.1 t/hour Transport dimensions excluding press 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight press approx. 4 t Remarks: The press was checked for funct ...

COMAP packaging press mod. SC-10 - CE compliant - used - Parcel dimensions H 750 mm W 1000 mm D 700 mm - Strength Kgf 1000 - Loading width: 1000 mm. - Loading depth: 700 mm. - Loading height : 1390 mm. - Complete with manual - Year 1996

Vertical Baller HSM 45 VL for SALE/RENT! Producer: HSM Type: 45 VL Year of production: 1995 In total we have 6 pcs.

Technical data press: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2010 Operating hours 3,817 hours, as of August 2026 Number of bales pressed 36,001 bales, as of August 2026 Press force main press 1000 kN Specific pressing force 120 N/cm² Press force cutting edges free kick 121 kN Dimensions of the insertion tray 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 110 kW Current consumption, total 213 A Fuse 250 A slow blow Tying 5-fold horizontally, fully automatic throughput capacities with a Bulk density of 20 kg/cbm 12.86 t/hour Bulk density of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depending on t ...

Fully automatic baler Manufacturer: PAAL Type KONTI 325 G/S/k Operating hours: approx. 39,000 h Year of Make: 2012 Technical manufacturer data: Pressing force: 990 kN at 300 bar Specific pressing pressure: 120 N/cm² Drive power: 2 x 55 kW Pump capacity: 2 x 370 l/min. Total connected load: 150 kW / 260 A Volume output at idle: 800 m³/h Volume capacity at 35 kg/m³: 390 m³/h Performance at: 35 kg/m³ bulk density: approx. 13.50 t/h 60 kg/m³ bulk density: approx. 21.5 t/h 100 kg/m³ bulk density: approx. 33 t/h Filling opening: 1,020 x 1,750 mm Bale size: 750 x 1,100 mm Binding: 5-fold vertical + 3-fold horizontal Machine weight: approx. 28 t Bale weights: 525 to 800 kg including: - Free kicks - Wirbulator 15 kW - Automatic 3-fold horizontal tying with 40 kg wire unwinding device - W ...

automatic baler Manufacturer: PAAL Type: KONTI 125 Year of Make: 1988 Operating hours: approx. 23660 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Binding: 3-fold vertical Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: approx. 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

used baler Manufacturer: PAAL Type: PACOMAT I-35 Year of Make: 2008 specifications: Press force: 35 t Specific pressing force: 7.14 kg/cm² Drive power: 22 kW Throughput: up to approx. 85 m³/h under operating conditions Channel format: 700 x 700 mm Filling opening: 800 x 620 mm Machine weight: up to approx. 6.5 t (depending on equipment)

Baler Avermann, type AVOS 1810 BRK-90/100, year of construction 2018, cross tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Press force: 100 t Driving power: 2 x 45 kW Dimensions of the insertion shaft: 1,800 x 1,000 mm Throughput at 35 kg/m³: 15.0 t/h Throughput at 60 kg/m³: 20.0 t/h Throughput at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on material Binding: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (LxWxH) Machine weight: approx. 29,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits  ...

Fully automatic baler Manufacturer: PAAL Type KONTI 275 D Year of Make: 2000 specifications: Press force: 75 t Drive power: 1 x 45 kW Total connected load: kW __ / 170 A Throughput under operating conditions: 280 m³/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Binding: 4-fold vertical incl. front printing plate slot cover Machine weight: approx. 25 t Bale weights: up to approx. 600 kg Including: - Free kicks - Large digit display

Technical data Maximum pressure: 80 tons Year of Make: 2002 Press force: 90.9 t/m² Number of bindings: 4 - horizontal Channel cross-section: 1100 x 800 mm Dimensions of the tailgate: 160 x 102 cm Bale weight: approx. 500 kg Weight: approx. 16,5Tonen Power connection: 400 V/75kW Bale tying: automatic Press capacity under operating conditions: max 285 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 9.9 tons/hour Theoretical throughput to density 65 kg/m3: approx. 18.5 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel Automatic rod for cleaning the blades from stuck material Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps  ...

Good day We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: HSM Type VK 4812 Year of construction: 2011 Operating hours 20,580 hours Pressing force main press 48 t Drive power 30 kW Machine weight press 12 t The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

used baler Herateller: PAAL Type: PACOMAT II Year of Make: 1995 Specifications: Pressing force: 27 t Drive power: 18.5 kW Total connected load: 25 kW Throughput: 115 m³/h Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm (H x W)

automatic baler Manufacturer: UNOTECH Type: UPAMAT 80 V5 SO Year of Make: 2010 Factory overhauled by the manufacturer in April 2023 Technical data: Cutting force: 800/315 KN/bar Specific pressing pressure: 10.12 kg/cm² Filling opening 1,600 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 700 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 45 + 30 kW Performance: - 920 m³/h at idle (theoretical) - 390 m³/h under operating conditions Throughput: with a bulk density of 20 - 30 kg/m³ approx. 12.0 t/h at 30 - 50 kg/m³ bulk density approx. 19.5 t/h with a bulk density of 60 kg/m³ approx. 22 t Total connected load: 80 kW Nominal current consumption: 140 A Connection fuse max. 250 A Pumps: Axia piston pumps Machine weight: 25,000 kg Control: Siemens S7

automatic baler Manufacturer: PAAL Type: Pacomat IS Year of Make: 1990 specifications: Pressing force: 27 t Specific pressing force: 5.51 kg/cm² Total connected load: 23 kW Rated current: 46 A Main drive power: 18.5 kW Capacity: 80 m³/h Control: Siemens S5 100 U Bale size: 700 x 700 Filling opening: 800 x 600 mm

A 2007 Anis Trend baler, model ATS 110-75S-9CT-150T. Balers like this compress loose cardboard, paper, plastic film and other dry recyclables into dense, stackable bales, cutting the number of collections a site needs and turning a bulky waste stream into a saleable material. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

A 2010 IPS baler, model AT-754-HS-30. Balers like this compress cardboard, paper, plastic film and other dry recyclables into dense bales, reducing collections and storage space and making the material easier to sell. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

automatic baler Manufacturer: PAAL Type: KONTI 125 SO Year of Make: 1990 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)

used baler Manufacturer: ABBA Type: ACOMAT 400 H3A Year of Make: 2008 specifications: Press force: 45 t Drive power: 7.5 kW Throughput capacity: approx. 45 m³/h Filling opening: 1,150 x 850 mm Channel format: 790 x 730 mm (W x H) Bale size: 790 x 730 x length in mm (W x H x L) Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Machine dimensions: approx. 4,250 x 2,580 x 2,000 mm (L x W x H) Machine weight: approx. 3,600 kg

A 2008 Garbage Gorger MSK baler. Balers like this compact cardboard, paper, film and other dry recyclables at the point they are produced, which frees up floor space, reduces collections and makes the material easier to sell. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

Maximum pressure: 50 tons Year of Make: 2006 Pressing force: 65 tons/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1000 mm Dimensions of the tailgate: 920 x 1400 mm Bale weight: 350-500 kg Weight: approx. 13 tons Power connection: 400 V/ 22 kW Bale tying: automatic

Automatic Channel Baler  Manufacturer: AVERMANN   Type: AVOS 1410-BR4-45/80 Year of manufacture 2018 Operating hours: approx. 5,000 h Technical data:   Press force: 80 t   Specific pressing force: 9.63 kg/cm² Drive power: 45 kW Idle capacity (theoretical): 226 m³/h Throughput capacities: - At 35 kg/m³ approx. 7.0 t/h - At 60 kg/m³ approx. 8.5 t/h - at 100 kg/m³ approx. 16.0 t/h    Filling opening: 1,400 x 1,000 mm Channel format: 1,100 x 750 mm Binding: 4-fold vertical Bale weight: up to approx. 650 kg   Machine weight: approx. 24,000 kg without feed belt without shredder  Subject to errors in the technical data

Specifications Maximum pressure: 32 tons Pressing force: 4.33 kg/cm2 Number of bindings: 4 horizontal Channel cross-section: 820 x 900 x reg mm Dimensions of the tailgate: 82 x 135 cm Bale weight: bos 400 kg Weight: approx. 6.1 tons Power connection: 380 V/ 22 kW Bale tying: automatic

Baler Presona LP 85 VH2, built in 2018, including spare parts package Technical data: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Bonding 5-fold vertical, (3-fold horizontal) Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg Materials: paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operations. The following work was carried out by us: New wear plates in the press channel Gasket completely replaced on the master cyl ...

Technical data Maximum pressure: 24 tons Power connection: 400V / 4kW Press force: 2.5 kg/cm² Year of Make: 2012 Bale size: 1200x800x1000 mm Price: on request Bale weight: approx. 400 kg Machine is fully functional after technical supervision. There is a possibility to order the machine with paint renovation. For more information, please contact us by email or phone!

• Available with conveyors (£18 for the pair) An AUSONIA vertical baler. Vertical balers have a small footprint and are loaded from the front, which makes them a good fit for shops, warehouses and factories producing steady volumes of cardboard, paper or film that do not justify a horizontal baler. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

Technical data Maximum pressure: 20 tons Power connection: 400V / 2.2kW Pressing force: 2.6 kg/cm² Year of Make: 2001 Bale size: 1100x700x800 mm Productivity: approx. 3 bales/hour Bale weight: approx. 200 kg Price: on request Bale weight: paper: up to 200 kg, film: up to 300 kg Machine is fully functional after technical supervision. Price also includes paint renovation. If you have any further questions, please do not hesitate to contact us by phone or email!

Technical data Maximum pressure: 9 tons Year of Make: 2010 Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power connection: 400 V/ 50 Hz Machine is fully functional after technical supervision. Feel free to contact us! Machine is fully functional after technical supervision.

Baler Macpresse MAC 105, press force 70 t, year 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of Make: 2011 Hours: 23130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Filling opening: 1500 x 750 mm Bale chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Binding: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Funnel Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time.  ...

The Niehoff D631 is a high-performance double-twist bunching machine designed for the production of copper strands and the stranding of insulated wires. By 2014, this model was well-established for its Eco-Bow energy-saving design and high precision in spooling. Production Performance - Max. Production Speed: 300 m/min - Max. Number of Twists: 6,500 twists/min - Cross Section Range (Cu soft): 0.09 – 6.0 mm² - Lay Length (Infinitely Variable): 6 – 100 mm - Twist Direction: S or Z Spool & Winding Dimensions - Max. Spool Flange Diameter: 630 mm - Total Spool Width: 475 mm - Max. Spool Capacity: approx. 750 kg - Core Diameter: 224 mm – 250 mm - Bore Diameter: 56 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

Channel baling press with manual and automatic operation Bale length adjustable 400,600,800,1000mm Year of manufacture 1987 Machine has been overhauled by us, Master cylinder resealed Bonding 3-fold horizontal Instruction manual with electrical and hydraulic plan available, Control Siemens S 5 Filling opening 580mm w x 900 mm l Bale format 500mm w x 600 mm h

Pressing force: 185kN, filling opening dimensions: 1195x541mm, max. bale weight depending on material: 200kg, max. bale dimensions: 1200x780x700mm, throughput capacity: 2 to 5 bales/h, idle cycle time: 35s, strapping: 4 fold with polyester strap, pressing capacity at idle: 68m³/h, pressing chamber dimensions: 1200x780x1300mm, voltage: 3x 400V, motor power: 3kW, length: 1700mm, width: 1046mm, height: 2370mm, weight: 994kg. An on site inspection is possible.

Technical data Maximum pressure: 60 tons Year of manufacture: 2011 Pressing force: 78 tons/m² Number of bindings: 5 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1500 x 1100 mm Bale weight: 425-575 kg Weight: approx. 21 tons Power connection: 400 V Bale tying: automatic Press capacity under operating conditions: max 370 m³ / hour Press capacity at idle: max 940 m³ / hour Theoretical throughput: to density 30kg/m³) 11 tons/hour Theoretical throughput: to density 50kg/m³) 15 tons/hour Theoretical throughput: to density 100kg/m³) 22 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press plate stably g ...

1 Piece Used Automatic Baler Manufacturer: PRESONA Type: LP 80 VH1 Year of Make: 1993 Technical data: Press force: 78 t Specific pressing force: 9.5 kg/cm² Drive power: 1 x 55 kW Throughput capacity: approx. 400 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 450-600 kg Binding: 5-fold vertical Oil tank: approx. 1,000 litres capacity, standing separately next to the machine Machine weight: approx. 22 t

1 Piece Used Automatic Baler Manufacturer: PRESONA Type: LP 80 CH2 Year of Make: 1993 Technical data: Press force: 78 t Specific pressing force: 9.5 kg/cm² Drive power: 2 x 45 kW Throughput capacity: approx. 560 m³/h Filling opening: 1,650 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 450-600 kg Binding: 5-fold vertical Oil tank: approx. 2,000 litres capacity, standing separately next to the machine Machine weight: approx. 30 t