137,515 used machines on RESALE, but how to find them? Machine Search
pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-49790-1398
Baler HSM 8 TE; good condition; cleaned and tested; Pressing force 80 KN; Bale size 650x505x500mm; with strapping. Baling press HSM 8 TE; good condition; cleaned and checked; pressing power 80 KN; bale size 650x505x500mm; with strapping tape.
TRUMPF 5130 B23 Year: 2021 Machine - C frame Press beam Spherical bearing of the press beam with press beam tilting On-Demand Servo Drive with 4-cylinder technology Distance measurement system (Y axis) with dynamic deflection compensation Hydraulic oil filling (life-long fill) Backgauge - Gauge fingers (two pieces) MACHINE OPTIONS Extension of the open height/stroke + 230 mm CNC-controlled wedge crowning 5-axis backgauge (X, Delta X, R, Z1, and Z2 axis) TRUMPF hydraulic upper tool clamp Keyboard and mouse Additional screen Shop floor programming TecZone Bend Tool Setup Optimizer (TSO) ACB Wireless (Automatically Controlled Bending) ACB Laser (Automatically Controlled Bending) Tool Indicator Part Indicator Front work area illumination Rear work area illumination Support bracket x 2 BendGuard Automatic
The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.
Capacity, ton 630 Stroke path till its position where it develops nominal capacity, mm 16 Slider stroke, mm 320 Slider strokes, spm 20 Max. distance between table and slider, mm 800 Distance adjustment between table and slider, mm 180 Table size, mm 1250 x 1250 Slider dimensions, mm 1000 x 1000 Opening in the table, mm 800 x 800 Thickness of bolster, mm 180 Cushion stroke, mm 130 Main motor power, kW 58 Machine dimensions, mm 3280 x 3470 x 6190 Machine weight, kg 55500
Hydraulic press manufactured in 2014. This WIS ATEVI Druckgeber ATeVi Heidel features a ram stroke of 800 mm and a closing force of 500 kN. It has a machine weight of 19,500 kg and includes a Siemens S7 control system. If you are looking to get high-quality hydraulic pressing capabilities, consider the WIS ATEVI Druckgeber ATeVi Heidel machine we have for sale. Contact us for further details.
3000 x 100 ton Regularly maintained by Bystronic with recent oil change. Modeva 10 graphic CNC X1, Y1,Y2, R1, Z1, Z2 New Fiessler light guards fitted 2021 Hydraulic top tool clamping Full set of 250 V30 R1 top tool including segmented sections
For sale is a high-quality and fully equipped laboratory / compact pellet press from the renowned manufacturer Amandus Kahl (Type 14-175) including precise K-Tron dosing screw, Rittal control cabinet and extensive accessories/spare parts. The system is ideal for test setups, laboratory applications or smaller productions in the pharmaceutical, chemical or food industries as well as for special applications, as the parts in contact with the product are made of high-quality stainless steel. Technical data & equipment: Pellet mill Amandus Kahl: - Manufacturer: Amandus Kahl (Hamburg, Germany) - Type: Press 14-175 - Machine No.: 22374 - Year of construction: 2006 - Certification: CE - Drive motor: 3.0 kW (220–240 / 380–415 volts) - Speed: Infinitely variable up to 101 rpm - Die: Diameter 150 mm - Press rollers: 2 pieces K-Tron dosing screw (produ ...
PJ Hare AM300 Pie Press Serial: 9B91140 2009, Twin pie press, 100mm diameter presses, on tabletop mobile frame, 1Ph
Key data: 75 t
Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm
Including various accessories Auction-ID: A1-49790-1516
Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible.
Auction-ID: A1-49818-1398
Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg
Grafoteam PST 48 Printing Plate Transport Trolley; Condition New; for panel format 811x1200mm; mobile. Plate trolley Grafoteam PST 48; condition new; for plate size 811x1200mm; mobile.
Including various accessories Auction-ID: A1-49818-1516
Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details.
High Pressure unit Hammelmann HDP 504 Year of construction 2021 Operating pressure 2200 bar Flow rate 122 ltr Power 490 kW Operating hours 880 h engine CAT C 18, Level 5 TIER 4F Power 565 kW in Truck, Used Truck Scania 164 L V8, 480 YoM 2004 Power 353 kW 802,500 km
A second-hand line for milling and pressing fruit and vegetable pulp. The line consists of: - BELT PRESS TYPE B FRU 800 HK WITH CONTROL PROBE IN FEED HOPPER FLOTTWEG 2008 - FEED HOPPER MEGA 2012 - ROTARY SIEVE WITH EXTERNAL INFLUX DIA. DRUM 355MM LENGTH DRUM LENGTH 1600 MMDRUM 1600 MM MEGA (FLOTTWEG) 2012/14 - METERING RUNG ELEVATOR - BRUSH POLISHER MEGA 2008 - INSPECTION ROLLER CONVEYOR MEGA 2008 - FLOTTWEG SCREW CONVEYOR 2017 - PULP CONTAINER 400L - CENTRIFUGAL PUMP FOR PULP - 500L FLUSHING WATER TANK - CENTRIFUGAL PRESSURE PUMP - PIPES, FITTINGS, ELECTRICAL CONTROL CABINET FLOTTWEG 2008 - JUICE COOLING SYSTEM STM 2018 - TUBE BEAKER SPOMASZ 2018
pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications Maximum pressure: 60 tons Power supply: 400 V/ 7.5 kW Press force: 6.25 kg/cm² Year of construction: 2010 Bale size: 1200x800x1100 mm Price: on request Bale weight: approx. 340-500 kg Machine is fully functional, after technical supervision. If you have any questions, please call us at +48 696 072 985
Electric Hammelmann HDP 127 high-pressure system on trailer – 1,000 bar / 48 l/min – 110 kW For sale is a high-performance electric Hammelmann high-pressure system of the type HDP 127. The system is mounted on a braked trailer and equipped with a soundproof hood. Technical data: Manufacturer: Hammelmann Pump type: HDP 127 Year of manufacture of high-pressure pump: 2012 Trailer year: 2012 Operating hours: 3,693 h Maximum working pressure: 1,000 bar Flow rate: 48 l/min Built-in electric motor: 110 kW Power supply: 400 V / 50 Hz Engine speed: 1,500 rpm Pump speed: 440 rpm Plunger diameter: 30 mm Maximum water temperature: 40 °C Permissible total weight: 3,500 kg Tyres: 195/70 R15 103 K Ball Coupling Braked trailer Soundproofing enclosure The system is suitable for demanding industrial cleaning work, surface treatment and other professional high-pressure a ...
Key data: 22 t, 900 mm, 850 mm
Electric Press Brake Cone C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Technical data: Condition: New device Working pressure: adjustable from 170 to 350 bar Flow rate: 17–21 l/min Pump: Ceramic Triplex Plunger Pump Pump speed: max. 1,450 rpm Hydraulic power: 14 kW / 19 hp Engine: Honda 2-cylinder 4-stroke petrol engine Engine power: 16.4 kW / 22 hp Motor speed: max. 3,150 rpm Electric starter with engine oil pressure monitoring Fuel consumption: approx. 5.5 l/h Tank capacity: approx. 20 litres Water connection: GEKA High pressure connection: M22 × 1.5 Maximum water temperature: 40 °C Required water inlet pressure: 1.8–6 bar Dimensions: 79 × 79 × 99 cm Weight: 130 kg Chassis: Two-wheeler trolley with pneumatic tyres Item number: 1487050 Standard equipment includes a 10 m high-pressure hose, a high-pressure gun with an approx. 800 mm long spray lance, nozzle holder, 15° flat spray nozzle, pressure gauge, infinitely adjustab ...
This 6-axis TRUMPF TruBend 3066 B26 press brake was manufactured in 2018. It features a press force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis backgauge (X/R/Z1/Z2) and operates with a rapid approach speed of 200 mm/s. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 3066 B26 machine we have for sale. Contact us for more information.
Key data: 22 t, 900 mm, 850 mm
Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Rated force: 6000kN, rated force travel: 1.7mm, rated energy: 10.2kJ, stroke: 100mm, stroke rate: 45/min, installation height: 360mm, tool holder adjustment: 50mm, clear width of press frame: 580mm, table width: 550mm, table depth: 620mm, tool holder width: 550mm, tool holder depth: 430mm, motor power: 15kW, length: 2435mm, width: 1500mm, height: 2750mm, weight: 13.5t, an on-site inspection is possible.
Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 4500kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible.
Press force: 2800kN, heating platen size X/Y: 500mm/500mm, daylight between the heating platens: 200mm, max. hydraulic pressure: 300bar, heating power: 9.4kW, drive power: 7.5kW, control: Siemens S5 with OP17, weight: approx. 5000kg. Equipped with sliding table, vacuum pump, vacuum chamber and vacuum receiver tank. An on-site inspection is possible.
Key data: 44 t, 1600 mm, 1550 mm
Electric Press Brake C15 CoastOne - Made in Finland Pressing force: 44T Bending length: 1600mm Spindles: 2x22T Light barrier: Lazersafe IRIS Control: TC15-2D Graphics Backgauge: 2 axis controlled X-R axes Press brake tool holder: Hydraulic WILA tool clamping up / down 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible.
This 4-axis Warcom UNICA 100-40 hydraulic press was manufactured in 1998. It features a press force of 100 t and a bending length of 4,000 mm, making it suitable for various bending applications. The machine is equipped with a Promecam tooling system and ESA S530 CNC control. If you are looking to get high-quality bending capabilities, consider the Warcom UNICA 100-40 machine we have for sale. Contact us for further details.
Technical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg
Vacuum/pressure central agitator Manufacturer: Herbst Type: HRZV-S 40 HO Year of Make: 2003 Suitable for mixing powdered and liquid media Parts in contact with the product made of stainless steel 1.4435 (AISI 316 L) Usable volume 8-32 litres Operating pressure -1.0 to +10 bar Temperature range 0-130°C Max. product viscosity approx. 10,000 mPas Agitator tank 75 litres with double jacket 5 litres Feed vessel 3.3 liters, operating pressure 0-10 bar, operating temperature max. 150°C, Fabr. Jentec, year of construction 2015 Centrally located armature agitator, power 0.37 kW, speed range 10-50 rpm, additional conveyor elements on agitator shaft and outer anchor (product-lowering), scraper elements made of PTFE for container wall and bottom, double-acting mechanical seal, sealing fluid silicone oil Eccentrically mounted propeller agitator, 2-bladed Was operated with exte ...
automatic baler Manufacturer: UNOTECH Type: UPAMAT 130 H5 Year of construction 2025 Operating hours: approx. 1,300 h Technical data: Press force: 1,200 kN / 315 bar Specific pressing pressure: 10.00 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 1,100 x 1,100 mm (H x W) Bale weight: 800 - 1,100 kg (depending on material and bale length) Binding: 5 times horizontally seen in the direction of pressing on the right side Drive power: 1 x 75 kW Oil tank volume: 2,400 litres incl. oil drip pan and leak oil warning device Volume output: - at idle approx. 920 m³/h - Under operating conditions: approx. 410 m³/h Weight output depending on the bulk material: - For 20 to 30 kg/m³ bulk density: approx. 12 t/h - For 30 to 50 kg/m³ bulk density: approx. 20 t/h - At 60 kg/m³ bulk density approx. 24 t/h - At ...
Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14"–26" Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24" printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening The Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and p ...
maximum number of results exceeded
please refine your search
50 € 
