bale used for sale

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-29 SCH Machine No.: 075777 3787/91 Year of construction: 07.1991 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 800 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg

Baler Macpresse MAC 111 AS / 1 with Wirbulator, built in 2014, currently undergoing an overhaul Specifications: Manufacturer: Macpresse International Type: MAC 111 AS /1 Year of construction: 2014 Press force: 170 t Drive power: 2 x 90 kW Mains voltage: 400 V / 50 Hz Filling opening: 2100 x 1020 mm Press chamber volume: 3.2 m³ Bale size: 1100 x 1100 mm (H x W) Throughput / Mixed paper: 35–40 t/h Binding: 5-fold horizontal Transport dimensions: approx. 12,500 x 2,300 x 2,845 mm (L x W x H) Press weight: approx. 46,000 kg Note: the control cabinet is from 2008.

For sale is a used, complete baling press system consisting of a chain belt conveyor for underfloor operation, with steel substructure and pit cover, a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 13,100 x 2,550 x 2,780 mm (l x w x h) Machine weight baler ap ...

Metso 2000 shredder Opportunity for bale openers, bag openers, construction waste, bulky waste and containers! The right one for little money! Perfect for wheel loader loading or grabbing excavators! Electro-hydraulic drive With vibrating chute With control cabinet with Siemens touch panel Hydraulic power pack with hydraulic tank approx. 1000 liters with oil tank heating! Dismantling and loading from the site as is! Operating instructions 110kW electric motor

Horizontal Hydraulic Press Function: Making Bullets Tying: Automatic Brand: Jovisa Model No.: JS-400-VA Engine: 7.5 KW (10 hp) Bullet size: 800x500 mm Bale weight: 300 Kg approx Feeding mouth: 1200x800 mm. Reference: MF-0090

Specifications Maximum pressure: 4.6 tons Press force: 1.31 kg/cm² Bale size: 500x700x700 mm Power supply: 400 V/ 1.1 kW Year of construction: 1993

Specifications Maximum pressure: 78 tons Pressing force: 95 tons/m² Duct cross-section: 750 x 1100 mm Bale weight: 450-600 kg Power supply: 400 V/ 55 kW Year of construction: 2001 Number of ties: 5-fold vertical, Dimensions of the tailgate: 1500 x 1100 mm Weight: approx. 24 tones

Baler HSM VK 4212, built in 2013, including spare parts package Manufacturer: HSM Type: VK 4212 Year of construction: 2013 Hours: 17,321 Press force: 42 t Drive power: 22 kW Idle cycle time: 12.7 s Filling opening: 620 x 1140 mm (WxL) Capacity: 50 kg/m³: 9.05 t/h Bale size: 700 x 800 x 600-1200 mm Binding: 4-fold, automatic Transport dimensions: approx. 7,200 x 2,000 x 2,100 mm (LxWxH) Weight: approx. 6,300 kg Materials: paper, cardboard, die-cuts, foil

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Mfc.: RIETER Year of production: 1985 Press power max.: 12 ton Type: Horizontal constr. A5/1 Bales size: 600 x 800 x 1200 mm Bales weight: 90-125 kg Feeding silo Semi-automatic binding Hydraulic unit Motor power: 4 kW

McIntyre M20 Can / Metals Baler Protect the environment and generate income by baling aluminium and steel cans. Versatile The M20 Baler is not only a cost effective system for cans but can also be used for many other applications where automatic volume reduction or product destruction is required. The M20 Baler will accept cans up to 250mm x 480mm and will produce up to 500kg of 20g aluminium drink cans per hour. The smaller the size of the can, the greater the machine output. When fed with aluminium drinks cans, the M20 crushes and locks the material together to produce dense 274mm cubes, weighing approximately 9- 11kgs. Such dense bales means that no tying or strapping is needed. The cubes are simply ejected from the machine and ready for transportation. Optinally, you can buy it, with can sorter!

McIntyre Alpack 2000 Automatic Can Sorter The McIntyre Alpack 2000 Automatic Can Sorter provides an inexpensive way of separating large volumes of steel UBCs from high value aluminium cans Efficient, versatile, cost-effective The McIntyre Alpack 2000 Can Sorter can work both independently or be coupled with a JMC Baler to provide a complete sorting and baling system. Alpack 2000 is able to give almost 100% separation of aluminium from steel.

McIntyre 5025SB Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong and reliable In line with all JMC machines, the 5025SB has been designed and built to last. The first 5025SB was built over 20 years ago and is still in constant daily use. The 5025SB has cutting blades around all three sides of the box so can handle oversized material. It has a fast cycle time and would be a valuable asset to any metal recycling facility.

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

automatic baler Manufacturer: UNOTECH Type: UPAMAT 60 V 5 Year of construction: 2016 Operating hours: approx. 11,500 specifications: Cutting force: 60 t Filling opening 1,400 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Drive power: 37 kW Rated power 70 kW Rated current consumption: 123 A Pump: Axial piston pump Machine weight: 23.500 kg Output: approx. 260 m²/hour under operating conditions Throughput: at 20 - 30 kg/m³ bulk density approx. 7.8 t/h at 30 - 50 kg/m³ bulk density approx. 12.0 t/h at 60 kg/m³ bulk density approx. 15 t Equipped with: Wirbulator 11 kW Press box planked with HARDOX central lubrication point Large digit display Conveyor belt control Free kick 1,300 litre oil tank including chain conveyor Manufacturer: PAAL Type: KEM 1400 Feed length: 6,810 mm Climbing length: 9,000 m ...

GreenLine SCH 230 - Mower container with flail mower GM 130. Universal device for mowing/mulching and for simultaneous reception of the mowing material. Heavy, robust design: mulcher with leaf mallet, mowing width approx. 130 cm, adjustable bottom roller, container approx. 3.5 m³, emptying, additional tailgate in the rear for transport of z.B. straw bales or tools. Tyres 10.0x75-15.3", 10 PLY. Ab. GG 2800 kg. Power requirement from 22kw/30 HP (manufacturer's specification), 1 hydraulic connection ew (tipper connection) required! Machine with age-related defects, but operational. Equipped with inerole brake, ABE (General operating permit for public road traffic), transmission with freewheel. 1 hydraulic connection ew required. Design-identical machine also available with 150 cm mower as well as one with 150 cm and 5 m³ container. Details and prices on request.

cross-section width:: 700 mm cross-section heigth:: 500 mm feed:: -- mm Condition: used, overhauled Specification: splitter for rubber bales - overhauled with CE - cross section width max.ca.: 700 mm - cross section height max. approx.: 500 mm - cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz - Infeed roller conveyor for product transport - Machine stands on a raised pedestal - Two-hand safety control for driving the blade movement - Safety guard according to current standards - New control cabinet - New on-board system machine - Operating and maintenance manual in English - CE marking - Paintwork: according to customer requirements - Refurbished with 1 year warranty - CE marking, Option: - Output roller conveyor new The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side

Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Use for containers [cm] 140 x 90 x ok. 130 cm Price: on request Power supply: 380V Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin  ...

Baler for foam / paper cardboard

automatic baler Manufacturer: PAAL Type PACOMAT II S SO Year of construction: 1994 specifications: Pressing force: 50 t Specific pressing force: 7.14 kg/cm² Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm Drive power: 45 kW Throughput: approx. 170 m³/h automatic 4-fold horizontal binding

Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Technical data paper shredder: Manufacturer Bollegraaf Type HBS 110 - 1500 Year of manufacture 1994 Drive power 110 kW Throughput approx. 25 t/hour Dimensions of feed hopper 1,970 x 2,000 mm Dimensions of built-up machine 3,160 x 4,400 x 3,980 mm (L x W x H) Weight approx. 11.5 t Special features: The drive unit is equipped with a hydraulic fluid coupling that minimises current peaks during start-up and operation. The rotor is mounted on oversized roller bearings and equipped with replaceable hammers that are extremely wear-resistant. Range of applications: The shredder was used to shred paper, cardboard, newspapers, magazines, books, etc. in order to achieve optimum compaction and dimensional stability of the bales in the downstream baling press. Condition of the shredder: The shredder is in good working condition and will be dismantled at the end of April. Scope of delivery: Shredder ...

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2011 (38.761 h), 2007 (52.386 h), 2007 (52.998 h) und 2007 (55.325 h) stand operating hours counter November 2021 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The four PZA cardboard shredders were in use in a Dutch logistics centre until 15 December 2021 to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported ove ...

An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Lifting device for bales Roll lifter Roll weight 200 kg Roll width 2 m 16 A 380 V

High-pressure pump, pump for baler HSM 500.1 VL with 7.5 kW motor

Hydraulic power pack pump, pump for the baler HSM 1160 Plus

New hydraulic pump QX61-250/63-100R88 for PAAL channel baler. Can be used in systems with a 75kW motor.

Used Triple Hydraulic Pump QX51-125/53-063/52-063R91 for PAAL channel baler. Can be used in systems with a 45 kW or 55 kW motor. Manufacturer partnumber: QX51-125/53-063/52-063R91

automatic baler Manufacturer: PAAL Type: PACOMAT V-80 D Year of construction: 2018 Operating hours: 2,100 h specifications: Pressing force: 82 t Specific pressing force: 97 N/cm² Press pressure: 315 bar Channel format: 750 x 1,100 mm Filling opening: 1,600 x 1,020 mm Binding: 4-fold vertical Drive power: 22 kW Total connected load: 31 kW, 30 A Throughput: - approx. 275 m³/h max. at idle Machine weight: approx. 17 t

Technological line for tire pyrolysis Total capacity: 70m3. Load capacity: 20-30 tons Manufacturer: a company from China, but the line has been adapted to European requirements. Year of production 2020. Tire pyrolysis efficiency from one ton of used tires = 45% by weight of heavy oil + approx. 33% of soot and approx. 10-12% of steel cord. The pyrolysis cycle from loading to loading is about 24 hours to 36 hours. depending on workflow and peripheral devices. If the tires are loaded in bulk, this reactor will fit about 16-18 tons. If they are baled in the press, it will fit about 25-30 tons. The line is assembled and has performed 18 test cycles. But because the business permit was not extended, it has not been working for a year.

automatic baler Manufacturer: HSM Type: VK 42/800 Year of construction: 2002 specifications: Pressing force: 42 t Channel format: 700 x 800 mm (W x H) Binding: 4-fold horizontal Filling opening: 800 x 650 mm Drive power: 30 kW Optionally with conveyor belts

Paal 325F channel baler incl. conveyor belt Paal 325F BJ:2008 with. 27,390h operating hours Functional! Gebr. channel baler from the manufacturer Paal for sale. The system has been dismantled in working order and is ready for shipment in our warehouse. The system is offered with a filling belt for feeding the hopper. According to known product data, the total weight of the press including the filling belt is approx. 35t. If you are interested in this facility, please feel free to leave a message via our contact form. Condition: used condition, normal signs of wear present, functional, dismantled. Paal 325F Year of manufacture: 2008 with. 27.390h operating hours, working condition! Here is a channel baler from the manufacturer Paal for sale. The system has been dismantled in working condition and is located in our warehouse ready for shipment. The system is offered in ...

automatic baler Manafacture: PAAL Type: PACOMAT IS Year of construction: 1993 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Duct format: 700 x 700 mm Filling opening: 800 x 650 mm Drive power: 18.5 kW Throughput: 80 m³/h with additional manual feed hopper Wire passage seen in the direction of pressing on the left side

Piferoen type 5H baler complete with conveyor. Baling press 6.30m x 2m x 1.6m approx. Conveyor 7.5m x 1.2m x 0.80m approx.. Chamber size (WxDxH) 108 x 59 x 105 cm approx. Suitable for baling textiles and other products. Bales can be completely covered for protection of material.

Press cylinder K260 S210 H8910 for use in scrap baler shears. Piston diameter - 260 mm; rod diameter - 210 mm; stroke - 8,910 mm Operating pressure: head side - 180 bar; Bottom side - 225 bar;