bale presses used for sale

Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

Bale size: 600 mm H (variable) × 600 mm W × 400 mm D Bale weight: 15–30 kg Pressing time: 35 seconds Pressing force: up to 8 tons Dimensions: 2500 mm H × 765 mm W × 575 mm D Integrated bale ejection mechanism Hinged door Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Weight: 415 kg Noise: 70 decibels DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification Made in EU OPTIONS Collecting tray for residual liquid Suitable for use at sea Electronic weighing system Annual maintenance contract Solar powered Galvanized or stainless steel V5HD PRESS FOR CANS & BOTTLES Fast, efficient and easy to use: The V5HD effortlessly presses aluminium cans and PET bottles to make them easier to dispose of. Recommended for restaurants, pubs, bars and special recyclers. Hinged door and 35-second pressing time Integrated bale ejection mechan ...

Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

CP30 PRESS FOR CANS AND OIL FILTERS With its compact design and a pressing force of 8 tons, the CP30 efficiently presses metal cans and large oil filters up to a size of 30 liters. Recommended for car repair shops, paint shops and food manufacturers. Pressing force of 8 tons Low voltage control and emergency stop knob for safe working Easy removal of cans after pressing and drip tray for residual liquid SPECIFICATIONS Dimensions with stand: 2540 mm H × 1105 mm W × 680 mm D Dimensions without stand: 1435 mm H × 615 mm W × 680 mm D Dimensions of the pressing chamber: 475 mm H × 350 mm W × 350 mm D Weight: 245 kg Pressing time: 35 seconds Pressing force: up to 8 tons Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels IP54 protection class CE Certification Made in EU OPTIONS Savings model Suitable for use at sea Galvanized or stainl ...

pdf description attached

SPECIFICATIONS: Vertical frame press Hydraulic regulation working length mm: 3,000 working height mm: 2,000 2 horizontal beams with 2 hydraulic clamps

Baler Presona LP 50 EH2, built in 2005, baling force 50 t Specifications: Manufacturer: Presona Sweden Type LP 50 EH2 Year of construction 2005 Press force 50 t Drive 37 kW Throughput rates at bulk density of 50 kg/m³: 11-13 t/h 100 kg/m³: up to 25 t/h Filling opening: 1250 x 1100 mm Bale size 1100 x 720 mm Bale weight: 400-550 kg Bonding 5-fold Transport dimensions approx. 8100 x 2120 x 2680 mm (LxWxH) Weight approx. 15 t The press is currently still in operation and can be viewed on request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

Hydraulic frame press Hungerbühler Press-Measurement: 4100 x 3050mm 3 vertical cylinders 3 horizontal cylinders Height adjustment via control box Width adjustment via control box Supports at the bottom for gluing wings at working height. The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Capacity: 1000 tons Stroke: 140 mm Table plate size: 910x920 mm Ram adjustment: 15 mm Main motor power: 28 kw Total power: 30 kW Dimensions (length x width x height): 2100x2500x4700 mm Height above floor: 3800 mm Total weight: 31000 kg

Ras 3200 x 4 mm CNC Max worklength: 3200 mm Max tickness: 4 mm Distance between clampblock -- ram: 400 mm Max displacement back gauge: 1550 mm Eletric motor (power): 7,5 kW

Machine Type: Press Brake Manufacturer: HACO Type: ERM36250 Year of construction: 2011 Condition: used / good Offer will only be sent if a complete imprint is provided! Location Warstein , Germany Reference MV-KÖL-0424-1 DESCRIPTION We offer you a used press brake from the manufacturer HACO. Press force 250t Bending length 3600mm further data on request. Availability: by arrangement Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted

PKZZ 250 Double Column Crank stamping Press Completely overhauled. Electric and Control- Not available. Table 2500 x 1400 mm Ram 2320 x 1250 mm Distance between uprights 2525 mm Window in table width 2300 mm Window in table depth 850 mm Stroke 400 mm Strokes per minute SPM 12 Adjustment of ram 120 mm Shutheight 550 mm Table cushion force 50 to Cushion stroke 160 mm Motor 32 kW Weight ca. 39 tons

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...

Briquetting Press Briquette Press Spänex Type SHB 50 K1 CE Built in 1986 Hydraulic briquette press With shavings container K1 Briquette mould 8-sided Briquette size 70 mm x 120 mm Capacity 50 kg/h Drive motor 5.5 kW Hours 35665 Wood moisture minimum 8% - maximum 20% Weight of the press 650 kg Chip container size 3m³ Chip hopper with agitator and feed screw Dimensions set-up 1500 mm x 1500 mm, height 2250 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, malt germs, ... The maximum chip size should not exceed 20 x 1 mm. Due to their density, briquettes have a volume reduction of up to 90% in the material and thus an extremely high energy and thus calorific value 2.5 kg of ...

Fortuna dough dividing and working machine Type: A3 Completely overhauled repainted Division of 30 Weight range dough pieces 32-80 grams Dough insert per saucer 960-2400 grams with incubation electric head The robust design and duration oil lubricating of the transmission parts ensures a long service life Easy cleaning of the knife head 380V / 50Hz Weight of the machine approx. 640 kg Machine stands on a specially made wheelchair Dimensions: Height: 150 cm Width: 60 cm Depth: 70 cm The machine was completely dismantled and completely overhauled from the ground up. Then completely repainted.

Capacity: 0 t Stroke: 0 mm Length of sleeve maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 5 to Execution supports Table length: 150 mm Table width: 120 mm Fixed stroke: 30 mm Distance from table to slide: min.: 25 mm max: 145 mm Machine´s weight about: 51 kg Overall dimensions machine: Length: 350 mm Width: 250 mm Height: 550 mm

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

Transport armored castors - frame for presses automatic lathes laser etc. 1 x Swivel caste set and 2 x fixed castor Large version 10 - 18 to Frame has been serviced , and is smooth. Condition : Very good . A tank caster frame that makes you happy. Says Pradler Maschinen Service

Complete plate production plant OCEM / Cassani consisting of: - Dosing and mixing system Attachment mixer (Teka) like new (approx. 3 years old) - OCEM OPA108SB plate press with moulding device 400x400 4-fold - Attachment doser STP825 - Double washout system for exposed concrete (4-fold washing) - Flat shelf with transfer table - approx. 2,600 steel pallets - Cassani calibration machine - Grinding machine Cassani - Coating system with paternoster - Packaging line (built in 2019) Complete tiles/slab production line OCEM / Cassani consisting of: - Dosing and mixing plant - First layer mixer (Teka) as new (approx. 3 years old) - Double layer hermetic tile/slab press OCEM OPA108SB with mould equipment 400x400 4-fold - First layer dosing unit OCEM STP825 - Double washing system for washed concrete/exposed aggregates - Flat depositing system ...

Kilian T300/32 EU-B rotary tablet press suitable for round and shaped tablets, 32 stations (EURO-B tooling), suitable for tablets up to 16 mm diameter, maximum fill depth 16 mm, pre-compression 28 kN, max. main compression 100 kN, output up to 216,800 tablets per hour, rotary paddle feeder, includes Kilian CW100 control unit, machine net weight approx. 1855 kg

Baler Europress 610 V5, year of construction 2012 / 2017 refurbished by the manufacturer, very good condition, with chain belt conveyor belt Europress Technical Data Press Manufacturer: Europress Type 610 V5 Year of construction 2012 / 2017 refurbished by the manufacturer Drive power 2 x 30 kW Press force 90 t Insertion shaft 1,450 x 1,100 mm Bale dimensions 1,100 x 730 x 1200 mm, length is variable Bale weight 400-900 kg 5-fold vertical setting, fully automatic Filling volume hydraulic oil tank 2100 L Transport dimensions excl. Press 8,500 x 2,650 x 2,850 mm Transport weight press approx. 21 t Detailed information on general overhaul on request. Technical data on the conveyor belt will follow. Currently, the press is still in use.

Semi-automatic dough dividing and wiring machine, Bread roll press Model: Divobun 3-30 sophisticated technology ... already proven many times! Stainless steel knife with easy cleaning position! with 3 active plates Sub-range 25 to 80 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH Demonstration machine / new machine with warranty

Baler Austropresses, type APK E55-1400, year of manufacture 2016, with free-baling device Manufacturer: Austropressen Type: APK E-55-1400 Year of construction: 2016 Propulsion: 2 x 22 KW Press force: 55 t Filling opening: 1400 x 1020 mm (LxW) Binding: 5-fold, automatic Throughput at 35 kg/cbm: 7.5 t/h 60 kg/cbm: 13.2 t/h Bale weight: 450- 550 kg Bale dimensions: 1100 x 750 x max. 1600 mm Machine dimensions: 8850 x 2700 x 3400 mm (LxWxH) Machine weight: approx. 14,100 kg Drive 2x22kW for maximum energy efficiency. With low material loading, the machine works with only 22kW drive. Only when the filling quantity is increased is the full drive activated in order to achieve the required throughput capacity. Materials: paper, cardboard, foil, plastic, PET bottles, fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no li ...

Semi-automatic dough dividing and wiring machine, Bread roll press Model: Divobun 4-30 sophisticated technology ... already proven many times! Stainless steel knife with easy cleaning position! with 3 active plates Sub-range 40 to 120 grams/piece Division 30 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH Demonstration machine / new machine with warranty

Baler Paal Likon 80/60, built in 2004, very good condition Specifications: Manufacturer: Paal Type Likon 80/60 Year of construction 2004 Hours 13265 Press force 60 t Drive power 75 kW Total power 94 kW Filling opening 1600 x 920 mm Bale dimensions 800 x 1000 mm, length variable Setting 4-fold automatic Throughput 320 m³/h Throughput at 65 kg/cbm approx. 21 t/h Bale weight 660-1100 kg Transport dimensions approx. 9405 x 2200 x 2500 mm (LxWxH) Machine weight approx. 13 t Version with a 520 l pump, drive 75 kW, for an increase in power to approx. 320 cbm/h under operating conditions, including oil cooling. Materials: paper, cardboard, foil, wood fibers, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale ...

POLYPRESS is suitable for the flexible production of straight and curved components made of glulam. Their special design allows adaptation to a wide variety of assignments and steppings in the shortest possible time. Batch size 1 can be produced rationally with this press.

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 400 to Stroke: (stepless) from: 12 s/min up to: 40 s/min Table surface: Length: 2500 mm Width: 1500 mm Slide adjustment: 100 mm Slide stroke: 300 mm Fixed stroke: 300 mm Slide surface: Length: 2500 mm Width: 1500 mm Distance table to slide nose: max: 800 mm Passage between the supports: longitudinal: 3240 mm Lateral: 1600 mm Air connect: 5.5 bar Total installed power: 40 kW Machine´s weight about: 70000 kg Overall dimensions machine: Length: 4300 mm Width: 2500 mm Height: 7000 mm

Fortuna dough dividing and working machine Type: A3 Division of 30 Weight range dough pieces 32-80 grams Dough insert per saucer 960-2400 grams including 3 plastic effect plates The robust design and duration oil lubricating of the transmission parts ensures a long service life Easy cleaning of the knife head Knife head electrically tiltable backwards for cleaning 380V / 50Hz Weight of the machine approx. 540 kg Trade-in and delivery on request Option Basic overhaul of the machine Dimensions: Height: 150 cm Width: 60 cm Depth: 40 cm

automatic baler Manufacturer: PAAL Type: KONTI 275 C Year of construction 1996 specifications: Press force: 65 t Specific pressing force: 7.88 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 450 - 600 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 45 + 30 kW Throughput: 380 m³/h Pressing capacity: - approx. 13.0 t/h at department store (35 kg/m³ bulk density) - approx. 23.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 35.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 21.0 t Optionally with feeding belt according to photos

Manufacturer: AP&T Lagan Type: FMC-2500 MC12 1010 S Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm (sender table: 1000 x 800 mm) Clearance: 1000 x 700 mm Stroke: 500 mm Press force: 2500 kN - 250 t Voltage: 400 V Electric power: 45 kW Hydraulic oil capacity: ~1.000 l Weight: ~11.000 Kg Manufacturing year: 1991 Operating hours: 13.296 h Condition: Not tested, Disassembled from a working factory

automatic baler Manufacturer: PAAL Type: KONTI 275 D Year of construction: 2002 Operating hours: approx. 30,000 hours Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control specifications: Press force: 75 t at 300 bar Specific pressing force: 9.09 kg/cm² Duct cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,550mm Number of binding wires: 4 pieces vertical Drive power: 1 x 75 kW Throughput: up to approx. 350 m³/h Hydraulic oil tank volume: 2,200 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other features: - Automatic cutting edge release - Large digit display for bale length and fault indication

Manufacturer: AP&T Lagan Type: FMC-2500 MC12 1010 Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm (sender table: 1000 x 800 mm) Clearance: 1000 x 700 mm Stroke: 500 mm Press force: 2500 kN - 250 ton Voltage: 400 V Electric power: 45 kW Hydraulic oil capacity: ~1.000 l Weight: ~11.000 Kg Manufacturing year: 1992 Operating hours: 19.470 h

Maximum pressure: 130 tons Pressing force: 107.5 tons/m² Channel cross-section: 1100 x 1100 mm Bale weight: approx. 700-1000 kg Power supply: 400 V/ 2 x 55 kW Year of construction: 1992 Number of bindings: 5 - fold vertical Dimensions of the tailgate: 1020 x 2000 mm Weight: approx. 40 tons Bale binding: automatic Press capacity at idle: max 720 m³ / hour Press capacity under operating conditions: max 450 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 15.5 tons/hour Theoretical throughput to density 60 kg/m3: approx. 26 tons/hour Theoretical throughput to density 100 kg/m3: approx. 40 tons/hour We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 30 to Total stroke: ca 300 mm Execution: 4 columns Table surface: Length: 530 mm Width: 380 mm Passage between supports: longitudinal: 550 mm Voltage 50 Hz 3x: 380 Volt Motor output: 7.5 HP Machine´s weight about: 2700 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 3200 mm

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Total stroke: 200 mm Execution: 1 support Table surface: Length: 290 mm Width: 230 mm Slide pressure: 4000 kg Distance from table to slide-nose: min.: 0 mm max: 250 mm Depth of throat: 118 mm Voltage 50 Hz 3x: 380 Volt Total power required: 3 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 900 mm Width: 700 mm Height: 1800 mm

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Shearing force: 20 / 300 kN Total stroke: 100 / 70 mm Power stroke: 22 / 6 mm Execution: 2 supports Slide diameter: 30 / 63 mm Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 bar Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2400 mm Various accessories: Déclanchement à deux mains

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Shearing force: 20 / 300 kN Total stroke: 100 / 70 mm Power stroke: 22 / 6 mm Execution: 2 supports Slide diameter: 30 / 63 mm Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 bar Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2400 mm Various accessories: Déclanchement à deux mains

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 4220 Technical data Pressure: 6.3 to Total stroke: 400 mm Mounting height max.: 500 mm Execution: 1 support Table surface: Length: 500 mm Width: 300 mm T-channel width: 14 mm Voltage 50 Hz 3x: 380 Volt Motor output: 7.5 HP Machine´s weight about: 900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2200 mm Various accessories: Déclanchement à deux mains

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1400 mm Table width: 250 mm Shearing force: 400 kN Ram feed: 1.8 m/min Total stroke: 150 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 7.5 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1345 mm Width: 720 mm Height: 2450 mm

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Execution: number of columns: 2 Machine frame: fixed Circulary table diameter: 220 mm diameter: 80 mm Number of strokes: from: 50 s/min up to: 150 s/min Adjustment of the slide: 40 mm Fixed stroke: 27 mm Tool height: 148 mm Distance between columns: front: 230 mm Voltage 50 Hz 3x: 400 Volt Power: 0.75 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Security/savety device Lamp Sound insulation cabin

Capacity: 0 t Operating hours: 32165 Technical data Pressure: 25 to Max. Bending length: 1250 mm Passage between press bars: 320 mm Distance between the: 1020 Max. stroke: 100 mm Depth of throat: 200 mm Feed rate: 75 mm/s Working speed: 10 mm/s Return stroke speed: 80 m/min Table length: 1200 mm Table width: 60 mm Table height: 865 mm Number of spacers: 6 pce Height of the spacers: 120 mm Number of cylinder: 1 pce Oil capacity: 30 l Voltage 50 Hz 3x: 400 Volt Motor power: 4 kW Machine´s weight about: 1600 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 2000 mm

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Control: Allen Bradley Technical data Pressure: 315 to Fixed table: length: 1780 mm Width: 1300 mm Hole in table: length: 1780 mm Width: 290 mm Number of strokes: stepless from: 8 s/min up to: 40 s/min Fixed stroke: 280 mm Power: 58 kW Machine´s weight about: 65000 kg Overall dimensions machine: Length: 3300 mm Width: 2500 mm Height: 5390 mm Table height: 1000 mm

Capacity: 0 t Stroke: 0 mm Distance column/center (Throat): 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1000 (12 Atü) kg Execution: 1 support Table surface: Length: 120 mm Width: 110 mm Max. distance from table to slide: 110 mm Depth of throat: 65 mm Machine´s weight about: 20 kg Overall dimensions machine: Length: 400 mm Width: 150 mm Height: 600 mm Various accessories: Micrometer stop

Capacity: 0 t Stroke: 0 mm Distance column/center (Throat): 0 mm Technical data Length of stroke: 205 mm Depth of throat: 120 mm Spindle diameter: 32 mm Die pressure:: 700 kg Table: Diameter: 105 mm Surface on floor: Length: 245 mm Width: 100 mm Machine´s weight about: 13 kg

Maximum pressure: 9 tons Pressing force: 1.94 kg/cm² Bale size: 770x600x500 mm Bale weight: - Power supply: 400 V/4 kW Year of construction: 1997 Productivity: - Price: on request

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 600 to Total stroke: 0 - 305 mm Table surface: Length: 3070 mm Width: 1530 mm Distance from table to max: 950 mm Passage between supports: Lateral: 1220 mm Slide clamping surface: Width: 3070 mm depth: 1530 mm Close traverse speeds: Rapid traverse: 296 mm/s Press stroke: 10 mm/s Return traverse speeds: 380 mm/s Motor power: 150 kW Overall dimensions machine: Length: 4250 mm Width: 2100 mm Height: (5700+900) mm

Capacity: 0 t Control: Cybelec S-DNC-8879-PS Technical data Pressure: 800 kN Total working length: 2050 mm Distance between the standards: 2050 mm Standard depth of throat: 255 mm Slide stroke, working stroke: from: 215 mm Mounting height max.: 390 mm Working speed: Press stroke: 8 mm/s up: 60 mm/s Voltage 50 Hz 3x: 380 Volt Motor power: 5.5 kW Machine´s weight about: 6700 kg Overall dimensions machine: Length: 3700 mm Width: 2000 mm Height: 3400 mm Various accessories: Set of bending tools Set of retaining clamps Motorized stop: 500 mm

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Execution: number of columns: 2 Machine frame: fixed Fixed table: length: 210 mm Width: 210 mm diameter: 80 mm Number of strokes: from: 50 s/min up to: 150 s/min Adjustment of the slide: 40 mm Fixed stroke: 27 mm Tool height: 148 mm Distance between columns: front: 230 mm Voltage 50 Hz 3x: 380 Volt Power: 0.75 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 700 mm Width: 600 mm Height: 1400 mm