bakery machines used for sale

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 8499 Omschrijving Projektor Fabrikaat Hilger Type TT 288.311 Serienummer 55211 Vergrotingen 10x, 15x, 25x, 50x en 100x

Large Format 3000 x 1500mm With Automation Siemens 840

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...

Hydraulic swivel bending machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper cheek, backgauge (1000mm), goat feet with automatic tool clamping, electr./hydr. Adjustment of the bending cheek -Illustrations similar-

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power  ...

PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Technical data Manufacturer: VAMA GmbH Model: VC 600 Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Machine for the production of plastic bags Excellent condition, located in Poland

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation - automatic CNC – controlled double-sided pre-bending - Conical bending device - three hydraulically driven rollers (one hydraulic motor per roller) - hydraulic linear under-roll adjustment - hard chrome-plated piston rods - hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics - Central lubrication system

Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive  ...

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Universal Blister machine with platen sealing for pharmaceutical production incl. various format parts and LYNX-5-fill control. The machine processes ALU/PVC blisters and is suitable for tablets, dragées und capsules. The forming an packing machine operates in single stroke (ET), i.e. all stations for the main functions forming, sealing and punching operate in the same cycle, while the film runs through the machine intermittently. Output: 15-50 cycles/min. at 12 mm forming depth | 15-40 cycles/min. at 28 mm forming depth.

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4JE-13Y-40P -Kaeltepower: 60 kW at -10ºC/40ºC, 26 kW at -25ºC/40ºC -Volume: 3 x 63.5 m3/h -Quantity in stock: 1 piece -Kealtemittel: R134 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

Book Back Rounding Machine Machine No.: 520

Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

PALLETIZER KRONES ALONG WITH THE CONVEYORS AS SHOWN IN THE DRAWING ATTACHED Palletizer KRONES PRESS UNI, production year 2007. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, • Divider, • Packs turner Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

Veneer joining machine with pneumatic voltage Cutting length 3m L x W x H: 3.5 x 1.2 x 1.7 m Year of construction 1996 Weight approx. 550 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax. Turning Length300 mmMax machining diameter320 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmWeight approx.8000 KgMovements X / Z210/810 mmCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

Max Size 520 x 850 mm Min size 100 x 120 mm 4 Buckles Noise hoods High speed feeder head Digital counter with program 1 Electronic knife Hook on shingle belt delivery Implant machine Very good conditions

We sell a pietroberto fork kneader. The machine is ideal for flatbread doughs. Used and overhauled / Warranty

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgPackage Mill / TurnPackage Mill / Turn NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in C-axis direct drive, speed max.1,200 rpm Integrated balancing system Motorspindle 20-20,000 rpm power 35/25 kW (40/100% ED) tool taper HSK-A63 according D ...

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

Control Heidenhain TNC620 Travel X/Y/Z [mm] 4100/420/300 Tool pick-up SK40 General: Designation Autom. Profile Machining Center AP-B 4000 Machining length 4,000 mm Travel X/Y/Z 4,100 / 420 / 300 mm Machine hood: Machine hood can be opened pneumatically upwards Operation: Operating terminal can be moved over the length of the machine Control: CNC control Heidenhain TNC 620 Additional control: Heidenhain handwheel HR130 Table specification: T-groove strips size 16, mounted longitudinally to the X-axis Bearing surface: 4,200 x 420 mm Spindle: Engine power: 14 KW S1/19 kW S6 Engine cooling: water with additive Speed range: 100 to 14000 rpm Torque: 74 Nm S1 / 100 Nm S6 Drilling capacity in St 60/Alu: 25 mm/30 mm Thread in St 60/Alu: M20/M30 Tool magazine: Tool holder: SK 40 Tool clamping system: Spring package pull-in force 9 KN Version: 12-fold disc magazine Cha ...

Key data: 8 , 600 , 230

High-performance industrial planing machine In good condition, lots of accessories '

Dowson bread slicer Model: B51C Fully automatic bread slicer, Constructed to handle a variety of loaves, up to 100 loaves per minute, comes with two different cutting heads, overall length 2800mm, 3Ph