bakery machines used for sale

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmWorking areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmClamping chuck diameter max.315 mmMax. Turning Length800 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

Table length: 10.800 mm Table width: 1.000 mm Table height: 200 mm Load capacity: 10 t/m Power motor spindle: 22 Kw Max. speed of turning: 1.700 rpm X Axis travel: 7.000 mm Vertical axis travel: 2.000 mm RAM travel: 1.000 mm Total installed power: 60 Kw Rapid feed rate: 15 mt/min CNC ECS 4801 Chip conveyor

CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours ...

KIMLA BPF 2131 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large work table by means of a powerful, high-speed spindle. The offer also includes a set of tool holders. The KIMLA CNC milling machine weighs 3100 kg. Technical data of the KIMLA BPF 2131 milling machine - machined materials: mild metals, wood, wood-based materials, plastics, etc. - CNC controller - work table dimensions (L x W): 3100 x 2100 mm - air pressure: 8 bar - power: 14 kW - power supply: 400 V; 50 Hz - weight of the BPF 2131 machine: 3100 kg

M.Bäuerle CAS 52/4 Art; Online folding machine with H+H feeder; 4 folding pockets; 3x Ionosation; Investment table 150cm; Max inlet width 520mm; may also be operated with other investors or upstream systems; Meter reading 4.5 million Online folding system M.Bäuerle CAS 52/4 Art; with feeder H+H; 4 pockets; 3x ionization; feed table 150cm; max.width 520mm; ca be used with other feeders or systems; counter only 4.5 mio.

JOTES SPD 40 surface grinding machine was built in 1988 in Poland by PONAR-JOTES Łódź. The machine, designed for precision grinding of workpieces, is an excellent choice for professional production applications. Workpieces placed on a large magnetic plate are ground by means of a spindle with a grinding wheel, which moves transversally and vertically. This solution, combined with the ability to automatically/manually adjust the height of the grinding wheel, significantly increases the accuracy and precision of the machining process. The SPD 40 magnetic surface grinding machine weighs 4800 kg. Technical specifications of the JOTES SPD 40 grinding machine - work table dimensions (L x W): 1000 x 400 mm - work table feed rate: 2-30 m/min - minimum work table stroke: 200 mm - grinding wheel dimensions (diameter x width x bore): 350 x 63 x 127 mm - grinding wheel stroke adjustment r ...

Description Sell used DMG NEF400 V3 5th Generation ISM 2-Axis Universal Lathe with C-Axis. Travel: X: 255mm Z: 800mm Lsbh Dtw Ujurtmre Hjrt Turning diameter over bed: 385mm Vibration diameter: 350mm Turning Length: 650mm Equipment: Main spindle as integrated spindle motor Speed: Max. 4500rpm Drive power: 8.0/11.5kW (100/40% ED) 12-speed disc turret VDI30 with 6 driven positions C-axis and spindle brake (Hydr.) Automatic tailstock, MK4 mount, travel: 680mm CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate and ShopTurn 3G Linux operating system Technology cycle for the application of an alternating speed for vibration-critical clamping Tool measuring device can be used manually in the working area Hydraulic Coolant spray gun Mechanical Oil Mist Separator Reinforced Coolant Pump 12bar ...

Used Hamba packaging machine for 75 mm cups. Capacity depending on the product up to 6400 cups per hour. Modernized in 2007.

X axis travel 1000 mm Y axis travel 700 mm Spindle travel 300 mm Table dimension 1.100x842 mm Spindle speed 40-2000 rpm Max power input 10 kW Spindle motor 8 HP Total permissible load on worktable 1 ton Machine approximate weight 15 ton

VLB GROUP ECO 92 NC2 tube bending machine was built in 2022 in Portugal by the VLB Group. The machine has only undergone a test run and has not been used in production conditions. The machine is used for precision bending of tubes and profiles with a maximum diameter of 92 mm. All machining parameters are programmed in an advanced industrial controller with a touchscreen. It allows precise basic movements, i.e. bending angle (Y axis) and tube rotation (Z axis), to be performed fully electrically. The distance between bends (X axis) is, in turn, precisely set using mechanical stops. Thanks to the technical solutions used, the offered ECO 92 NC2 mandrel bending machine is the perfect choice for high-quality workpiece bending in small and medium series. The total weight of the machine is 2420 kg. Technical specifications of the VLB GROUP ECO 92 NC2 tube and profile bending machine -  ...

Used lathe from Wagner Wagner WDE 500 Lathe, cycle-controlled Only approx. 1700 operating hours Turning diameter 500 mm Turning length 1500 mm Control Siemens 802 C Circumferential diameter over bed carriage 280 mm Spindle bore diameter 82 mm Number of Controlled Axes 2 Speed range 20- 3000 rpm Rapid traverse speed 5 m/min Number of receptacles in the turret 1 Multifix "C" Tailstock Yes MK 5 Drive power 7.5 kW Machine weight approx. 3.0 t Dimensions L x W x H 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant device - Basic holder - 3- Jaw chuck - various PARAT tool holders

Key data: 400 , 64 , 30

Manufacturer: Arburg Type: 270C 400 - 100 Built: 2000 Control: Selogica Closing force: 400 kN Closing type: Hydraulic Tie bar distance: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool installation height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Lifting volume: 70 cc / 64 gram hp Spray pressure: 1550 bar General Engine: 11 kW Heating: 5.9 kW Dimensions: 3.42 m x 1.5 m x 1.7m Weight: 1980 kg Screen text: German Additional equipment Core train: x1 Robot interface

Works perfectly.

Key data: 1000 , 194 , 45

Manufacturer: Arburg Type: 420 C 1000 - 350 Built: 1999 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool installation height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 45 mm Lifting volume: 230 cc / 194 gram PS Spray pressure: 1670 bar General Engine: 22 kW Heating: 8.8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 3430 kg Screen text: German

FOBA FD84S Sensor for YAG Laser Marking System For sale is a used FD84S sensor from the manufacturer FOBA. The sensor is intended for use in YAG laser marking systems. Technical details: Manufacturer: FOBA Model: FD84S/S50 Design: Sensor / Laser Control Component Laser class (system use): 4 Wavelength: 1064 nm Laser power (system use): 70 W Pulse power: 10 kW Pulse duration: 70 ns Application: Spare part / component for FOBA laser marking systems Condition: Used, functional Buy FOBA FD84S sensors and other items at low prices – Here you can buy goods from the professionals for the professionals – In our SHOP you will find more attractive offers.

Key data: 1300 , 166 , 40

Manufacturer: Arburg Type: 420C 1300 - 350 Built: 2000 Control: Selogica Closing type: Hydraulic Closing force: 1300 kN Tie bar ratio: 420 mm x 420 mm Plate size: 605 mm x 605 mm Tool installation height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 40 mm Lifting volume: 182 cc / 166 gram PS Spray pressure: 2120 bar General Engine: 22 kW Heating: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4080 kg Screen text: German Optional extras Robot interface Core pull x2

Helmut Fischer XDL-XYmZ X-ray fluorescence device For sale is a professional X-ray fluorescence device (XRF) from the brand Helmut Fischer GmbH + Co, model XDL-XYmZ. Power: 120 W Voltage: 230 V / 50–60 Hz Model Number: XDL-XYmZ Made in Germany The instrument is ideal for precise material analysis in the laboratory, quality control and industrial environment. Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Vertical lathe KOLOMNA 1540 T CONVENTIONAL MACHINE READY TO INSTALL Spindle diameter 4.000 mm Working diameter 4.140 mm Max working height 2.060 mm Ram travel 1.250 mm Weight over spindle 100 ton Motor power spindle 100 kW Boring/milling unit included Nr.02 RAM with visualization by DRO Excellent conditions, mechanical really like a new.

Machine Type: Punching/Nibbling Machine Manufacturer: EDEL Type: Micromat 205 Year of manufacture: coming soon Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-EDE-0925 DESCRIPTION We offer you a used punching / nibbling machine from the manufacturer EDEL. Available now Technical data and accessories will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Key data: 500 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 1998 Control: NC 4 Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3 m x 1.1 m x 1.6 m Weight: 2500 kg Screen text: German Additional equipment Core train: x1

Wampfler GS 21-05/1812/04ML/LT Slip Ring Assembly GS 21 Technical details: • Manufacturer: Wampfler • Type: GS 21-05/1812/04ML/LT • Year of construction: 2003 • Degree of protection: IP54 • Version: 4 × 250 A + PE (660 V), 12 × 25 A (690 V), 4 × 20 mA (10 V) Description & Use: Slip ring assemblies for the safe transmission of energy and signals in rotating applications, including in: •Cranes • Lifting and conveying technology •Wind turbines •Mechanical engineering Condition: Used (see pictures). Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Key data: 800 , 149 , 35

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range- 5000 rpmDrive power (40% DC)32 kWMax. torque (40% DC)360 NmC-Axis Speed-5000 rpmTorque of C-Axis (holding torque)280 NmT ...

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...

Key data: 350 , 34 , 22

Manufacturer: Battenfeld Type: Plus 350/75 Built: 2004 Control: Unilog B2 Closing force: 350 kN Closing type: Hydraulic Tie bar ratio: 270 mm Plate size: 470 mm x 285 mm Tool installation height: min. 150 mm max 250 mm Opening distance: 200 mm Plate spacing max.: 450 mm Screw: 22 mm Lifting volume: 38 cc Spray weight PS: 34.5 gram HP Spray pressure: 1627 bar General Engine: 7.5 kW Heating: 2.7 kW Dimensions: 2.3 m x 0.9 m x 1.3 m Weight: 1100 kg Screen text: German / English Additional equipment Robot interface

Key data: 500 , 130 , 35

Manufacturer: Battenfeld Type: BA 500/210 TM Built: 2000 Control: Unilog B2 Closing force: 500 kN Closing type: Knee lever Tie bar distance: 320 mm x 320 mm Plate size: 490 mm x 490 mm Tool installation height: min 150 mm max 350 mm Opening distance: 250 mm Plate spacing max.: 600 mm Screw: 35 mm Lifting volume: 144 cc Spray weight PS: 130 gram PS Spray pressure: 1500 bar General Engine: 11 kW Heating: 10.4 kW Dimensions: 3.3 m x 1.1 m x 1.7 m Weight: 2500 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 750 , 198 , 40

Manufacturer: Battenfeld Type: BA 750 - 350 TM Built: 2000 Control: Unilog B4 Closing force: 750 kN Closing type: Knee lever Tie bar distance: 370 mm x 370 mm Plate size: 590 mm x 590 mm Tool installation height: min 200 mm max 400 mm Opening distance: 330 mm Plate spacing max.: 730 mm Screw: 40 mm Lifting volume: 220 cc Spray weight PS: 198 gram PS Spray pressure: 1595 bar General Engine: 15 kW Heating: 12.1 kW Dimensions: 3.8 m x 1.3 m x 1.8 m Weight: 3300 kg Screen text: German / English Additional equipment Robot interface Core train: x1

Key data: 1000 , 291 , 45

Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2

Type: Robot 500 Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Double screw Standard double screw housing Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Lenght: 80 Height: 155 Delivery time: after advanced payment machine is generally refurbished and ready for delivery

Table diameter 2.000 mm Working diameter 2.000 mm Machine under retrofit/rebuilding to install CNC Mechanical ready, totally rebuilt.

SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

AMOB MAH 40/3 CNC 3-roll bending machine was built in 2021 in Portugal by AMOB Group. The machine, designed for bending tubes and profiles, ensures the highest precision and repeatability of the produced parts. The machining process is performed by three hardened rollers, of which the upper roller has hydraulic adjustment. Each of these is driven by a reliable, high-power motor, which is located inside a fully welded body. This solution enables bending of even the most complex shapes both vertically and horizontally. All this is complemented by an advanced CNC control with memory for numerous programmes. The MAH 40/3 CNC tube and profile bending machine weighs 540 kg. Technical specifications of the AMOB MAH 40/3 CNC bending machine - control panel with CNC control - number of rollers: 3 - roller diameter: 148 mm - roller rotational speed: 12 rpm - number of shafts: 2 - shaft di ...

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

ACCUTEX AU-500iA wire EDM was built in 2007 in Taiwan by ACCUTEX TECHNOLOGIES CO., LTD. The machine uses advanced electrical erosion technology for precise, 5-axis machining of workpieces with a maximum weight of 400 kg. This method enables difficult shapes to be achieved in even the hardest materials. The need for other secondary processes, such as polishing, is also minimised or completely eliminated. All this makes the offered AU-500iA wire EDM machine the best choice for the production of e.g. dies, tools and punches. The total weight of the machine is approximately 3500 kg. Technical specifications of the ACCUTEX AU-500iA wire EDM - CNC controller - number of axes: 5 (X,Y,Z,U,V) - feed in the X/Y/Z axis: 500/300/300 mm - feed in the U/V axis: 100/100 mm - maximum workpiece weight: 400 kg - maximum workpiece dimensions (L x W x H): 990 x 560 x 295 mm - cutting angle: ±22.5 ...

Technical Specifications - Bridgeport Series I Table Size / Work Surface 9" × 49" (≈ 299 mm × 1245 mm) T-slots 3 pieces, spacing 2.5" (≈ 64 mm), groove width 0.625" (≈ 16 mm) Travel X (Transverse) without Power Feed: 36" (≈ 914 mm) with power feed: 33" (≈ 838 mm) Travel Y (Transverse to Feed) 12" (≈ 306 mm) Quill Stroke (Drilling Spindle Stroke) 5" (≈ 127 mm) Knee Lift (Z-Axis of Table) 16" (≈ 406 mm) Ram Adjustment (Head Stem on Ram Slide) 12" (≈ 306 mm) Min. / Max. distance spindle axis to table nose (spindle/table nose distance) min: 2.5" (≈ 64 mm) Max: 18.25" (≈ 463 mm) Min. / Max. distance spindle to column front (minimum/maximum internal width) min: 6.75" (≈ 171 mm) max: 18.75" (≈ 476 mm) Spindle / Quill Spindle Diameter: 1.875" (≈ 48 mm) Quill Diameter: 3.375" (≈ 86 mm) Spindle holder (standard): R-8 Spindle motor / power 30 minute ...

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

Control CC 100 for ENGEL injection moulding machines

Used 4 flanges fit on a JUNG, HF 50 (R or RD) Scope according to pictures ! ( 4 flanges , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With path control MILL PLUS iT Year of Make: 2006 Travel: X 800 Y 800 Z800 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine positions as a double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting IKZ – 40 bar Conveyor Rotoclear Tool Measurement BLUM Laser 3 D Probe Heidenhain TS 641 Operating mode 3 + 4 Electronic handwheel 3-Piece Height Adjustable Machine Shoes Transport device Operating instructions

Siemens Small X-ray / Intraoral Device Heliodent MD with tube SR 60/70/7 0.7 • Before takeover, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "IST" state from the freiberg (EXW), Saxony, Germany, and prepayment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation and configuration of the system or parts must be carried out by a specialist or technician authorized by the manufacturer! • The offer is subject to interim sale.

Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.

3000 x 1500mm / 5000w / Siemens 840 - Single Head Technology

NOVICK AF1300 die-sinking EDM was built in 2012 in China by Novick Digital Equipment Co., Ltd. The machine is used to produce parts with complex geometries that have applications in, among others, aviation and aerospace industries. The machining process is performed by means of electrical erosion, which minimises or completely eliminates the need for other secondary processes, such as polishing. The combination of a full closed-loop control system and dual feedback compression, in turn, guarantees exceptional machining accuracy in even the most demanding applications. The NOVICK AF 1300 sinker EDM weighs 2300 kg. Technical specifications of the NOVICK AF 1300 die-sinking EDM - feed in the X/Y/Z axis: 520/300/300 mm - work table dimensions (L x W): 600 x 400 mm - generator: NOVICK 560F - power: 10 kVA - power supply: 3x 380 V; 50/60 Hz - weight of the NOVICK AF1300 machine: 2300  ...

CNC fine lathe Make: PetrolGer Type: TNL Control: Siemens 810T Built: 1991 Equipment and accessories: - Swivel loader system - Small conveyor belt - Charging-unloading gripper - Chip conveyors - Foot lever for clamping and relaxing the collet

IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Mobile Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Used spiral kneader KEMPER, type: ST 75 A -Refurbished - for 120 kg of dough or 75 kg flour - incl. 2 extendable tank wagons - Condition: Very good, ready for immediate use - 6 months warranty Sightseeing and test run are possible by arrangement.

Complete with automatic sheet storage tower