bakery machines used for sale

: neu : ca. 12 Wochen ab Auftrags : Türkei : 29000 € : 553.9 € : 2050 mm : 4 mm : 4 mm : 3 mm : 3 mm : 2 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3800 mm : 1150 mm : 1110 mm : 2450 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mm plate thickness: 2 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 2,5 bei 400N/mm² mm roll diameter: 90 mm Weight: ca. 490 kg Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Bending roll adjustment via handwheel, suitable for conical bending Emergency stop cord The machine comes from a training workshop and is in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 1 mm

Segment bending machine, mobile, with screw clamping system Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length 1000 mm Blechstärke Stahl/sheet thickness steel 1.5 mm Blechdicke Alu/sheet thickness Aluminium 2.25 mm Blechstärke VA/sheet thickness Stainless 1.00 mm Farbe/Colour grau Raumbedarf/Space requirement 1480 x 740 x 1090 mm Machine weight/weight approx. 260 kg Bending angle (max.)/bending angle 160 degrees Machine number: 5033

Year of manufacture 2004 Single Station Machine Clamping force: 10 tons. for the production of 5-10 liter canisters incl. single and double head Wall thickness control: 64 points Machine is in good condition and immediately available

Key data: 800 mm, 16

Spiral bevel gear dia. 800 mm

Key data: 1500 kN, 291 g/PS, 45 mm

Arburg 470C-1500-800 Injection moulding machine with conveyor belt and sprue picker (257) Year of production: 2005 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 45 Injection weight [g]: 291 Injection pressure [bar]: 2470 Clamping force [kN]: 1500 Gap spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Minimum mould height [mm]: 250 Control Type: Selogica Tongue: German Installed power [kW]: 44,9 Working time [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot connection: Euro 12 Feed hopper: NO

Mosca strapping machine, type RO MP 4, year 2004, 5 mm bandwith, arch size 60 x 80 cm

Offer 26162 Technical data: - Rated power at 50% ED 80 kVA - Max. Welding power 211 kVA - Projection 350 mm - Welding values - sheet steel 8 + 8 mm - Brass sheet 4 + 4 mm - Aluminium sheet 4 + 4 mm - Electrode force adjustable 120 - 720 daN - Required air pressure 6 - 10 bar - Cooling water volume 12 l/min - DALEX MPS 8043-1 controller for : - Retention time; Electricity time; - Holding + holding time, and - Rise time + pulse + pause time - Drive 400 V - Space requirement approx. W 950 x H 2100 x D 1500 mm - Weight approx. 600 kg - with: - complete electrical + pneumatic equipment - E. footswitch

Offer 26161 Technical data: - Rated power at 50% ED 25 kVA - Max. welding power 107 kVA - Adjustable projection 140 - 500 mm - Welding values - sheet steel 6 + 6 mm - Brass sheet 3 + 3 mm - Aluminum sheet 1.2 + 1.2 mm - Electrode force adjustable 17 - 278 daN - Required air pressure 6 - 10 bar - Cooling water volume 8 l/min - Drive 400 V - Space requirement approx. W 670 x H 1250 x D 1600 mm - Weight approx. 240 kg - with : - DALEX MPS 200 welding control - E. Foot Switch

Metal cross-cut sawing machine Lg.Nr. 24108 Technical data: - Saw blade dimensions up to 300 x 2.0 x 40 mm - 2 saw blade spindle speeds 40 + 80 1/min - Cutting range at 90° around 100 mm - flat 120 x 85 mm - Mitre adjustable on the left up to 45 ° - right up to 30 ° - Material vise - Drive 400 V / 1.0 / 1.2 kW - Space requirement approx. W 600 x H 800 x D 700 mm - Weight approx. 180 kg

Key data: 400 mm, 315 mm, 350 mm

Control: HEIDENHAIN Table surface: 315 x 710 mm Spindle speed: 50 - 3000 1/min Dimensions LxWxH: 2700 x 2250 x 1950 mm Weight: 1,700 kg

- PFH 82 pallet feeder - Digitale Control - 1. Station with 6 buckles - Crossfold-Station with 2 knifes - VSA 66 mobile delivery

CNC Laser Cutting Machine - Fiber Laser 9 kW Amada LCG 3015 AJ M2 + ASLUL Twin Year of manufacture 2018 AMNC 3i CNC Control Laser source AJ 9000 (9 kW) Travels: X 3,070 mm Y 1,550 mm Z 100 mm Axis speeds X,Y,Z 120/80 m/min. Cutting feeds 0 - 60 m/min. Z-Axis Sensor HS 2013 Loading/unloading storage towers ASLUL TWIN 16-fold nozzle changer Equipped with: Clean cut (Hochwertiger Schnitt) NC Focus Control Lens 190 mm Oil Shot Barcode Reader WACS Automatic scrap conveyor 16-fold nozzle changer Storage and transport system ASLUL TWIN (loading/unloading) Very good condition Offer number V-7157

Only available until 27.06.26! Banding roller including steel belt roll for fastening e.g. containers, heavy loads on Euro pallets, etc. Includes clamps and 3 rolls of steel straps. Delivery by pick-up.

Designation: 10\" WiFi & Bluetooth touchscreen for Caterpillar machines CATERPILLAR / TRIMBLE TD520-LW 10\" TOUCH DISPLAY WIFI & BLUETOOTH TOUCH SCREEN New Auction-ID: A1-48010-17

Key data: 2 , 300 mm

Bench grinder with infinitely variable speed Double Bench Grinder OTT Type 31 Year of manufacture 2004 CE 2 grinding drums Working length 300 mm Infinitely variable speed Maximum speed of the grinding drum approx. 44 m/s Motor power 2.3 kW 400 volts For sanding curved wooden parts, for smoothing edges or surfaces.

Mössner Rekord SM/420 Vertical Band Saw Manufacturer: August Mössner GmbH & Co. KG, Mutlangen Type SM/420 Year of construction 1988 Machine number 27382 Robust industrial band saw for metalworking Vertical design with large work table Band saw blade guide available Suitable for contouring, separating and cutting work Solid cast construction According to the previous owner, the machine is functional before storage Current functional status unchecked Traces of use according to age and use present Loading possible for an extra charge and by prior appointment Auction-ID: A1-47153-1048

Code: 0417 Brand: PEGIC - ITALY Model: DIAMANT 10 - CE Standard Water-cooled sharpening machine and grinder with base for sharpening tools, chisels, drill bits and various tools – CE Standard Technical data: Water-cooled grinding wheel: Wheel diameter 250 mm Hole 25 – Rpm 400 Grinder: Grinding wheel diameter 150 mm Hole 16 – Rpm 2800 Three-phase motor 0,75 Kw Overall dimensions mm 700 x 450 x 1100 h Weight kg 6

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm tool taper: SK40 Speed: 40-2000 U/min. control: Aktiv HEIDENHAIN table-size: 600 x 210 mm total power requirement: 2 kW weight of the machine ca.: 0,73 t dimensions of the machine ca.: TBH 1,20x1,10x1,60 m Comes from a vocational school - Powered feed in X, Y, and Z axes - Coolant system - Machine vice - Work light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: OSP P 300LA spindle turning speed range: 5000 U/min turret (x-stations): 12 turning diameter over bed: 580 mm turning diameter over slide rest: 470 mm turning diameter: 340 mm turning length: 800 mm x-axis: 260 mm z-axis: 1.010 mm y-axis: 120 mm spindle nose: ASA 6 spindle bore: 90 mm w-axis: 895 mm total power requirement: 22 kW weight of the machine ca.: 6,8 t dimensions of the machine ca.: LBH 3,5 x 2,1 x2,5 m • Turret: 12-position radial, motorized, turret motor 6,000 rpm, 7.1 kW • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW, 6 bar, 20 l/min • Tool presetter: Manual • Programming: IGF conversational programming incl. Chip Conveyor incl. Tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mm arm length: 700 mm workpiece height max.: 1300 mm tool taper: MK3 feeds: 0,1-0,3 mm/U spindle turning speed range: 100-1.220 U/min total power requirement: 1,4 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: LBH 1,8 x 0,8 x 2,3 m Incl. cube table Incl. drilling feed Mechanical clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Motor output: 1,8 kW Clamping height max.: mm Overall size: mm Weight: 240 kg Number of boring spindles: 21 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oscillation: ja ja / nein : ja ja/nein : ja ja/nein tiltable up to: 30 Grad Motor output: 2,8 kW Table dimensions: 850 x 300 mm sanding width: 150 mm Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 500 mm Working height: 240 mm Motor output: 4,0 kW Length of the planing table: 2470 mm Number of knives: 4 St. Feed speed: 7/14 m/min. Dust suction hood: mm Dimensions (L/W/H): mm machine weight ab.: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 400 mm Cutting height: 300 mm cutting width: 380 mm Motor output: 2,2 kW Table dimensions: 600 x 450 mm Table tiltable: Grad Dimensions (L/W/H): mm machine weight ab.: 242 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 800 x 2790 mm throat: 550 x 310 mm motor power: 4,0 kw sanding belt measurements: 150 x 7800 mm : : : 2600 Working width: 850 mm Motor output: kW Length of sanding paper: mm Dust suction hood: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1014.93 € : 2050 mm : 16 mm : 16 mm : 13 mm : 13 mm : 10 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 4300 mm : 1600 mm : 1550 mm : 6100 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 28450 € : 543.4 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone leng ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 111670 € : 2110.56 € : 400 mm : 500 mm : 400 mm : 225 mm : 400 mm : 50 kg : 450 mm : 500 - 2200 1/min : 5,5 kW : 19 kW : 2800 mm : 2800 mm : 2610 mm : 2850 x 2000 x 2470 mm : 3450 kg : Dm. 355 x 38 x Dm. 127 mm : 0,001 mm : 1.7 kW : 2.4 kW : 10 - 150 1/min : 0.005 mm : 0.003 mm iSurface control with 10,4", touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English ALTERNATIVE: model version FRG-400S with Smart iContro ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50900 € : 962.01 € : 2540 mm : 6.5 mm : Hydraulisch : 135 ° : 3900 mm : 1750 mm : 2050 mm : 6200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,-- OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 € : 831.81 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 57500 € : 1086.75 € : 4010 mm : 2 mm : Hydraulisch : 135 ° : 5600 mm : 1750 mm : 2050 mm : 4600 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 57100 € : 1079.19 € : 3200 mm : 2 mm : 1.2 mm : 3 mm : Motorisch : 4450 mm : 2200 mm : 1900 mm : 4500 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 249800 € : 30 to : 2500x1250 mm : 2500 mm : 1250 mm : 116 m/Min : 80 m/Min : 140 m/Min : 40 mm : 1200 1/Min : 425 1/Min : 3200 1/Min : 6 mm : 3 mm : 3 mm : 1.5 mm : 27 : 0,1 mm : 0,05 mm : 22 U/Min : 150 U/Min : 120 kg : 940 mm : 6 bar : 88.9 mm : 15 kW : 5750 mm : 6800 mm : 5360 mm : 7360 mm : 2310 mm : 12960 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 ...

: neu : 2024 : 3984 : prompt, Zwischenverkauf v : Spanien : 10090 € : 193.73 € : 1 : 32 mm : MK 3 : 250 mm : 65 - 125 - 185 - 365 - 54 U/min : M24 : 665 mm : 640 mm : 2100 mm : 260 kg : Automatisch 0,10 - 0,20 - mm/U : 100 mm : 85 - 635 mm : 1.170 mm : 300 x 270 mm : 665 x 400 mm : 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine 3 aut. feeds left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN Incl. following optional equipment: lighting equipment coolant equipment and machine base with T-slots (symbol photo) OPTION (PRICE ON REQUEST): reverse for tapping Time of delivery with options: approx. 8 weeks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 63900 € : 1207.71 € : 4200 mm : 1.5 mm : 1 mm : 2 mm : Motorisch : 5450 mm : 2200 mm : 1900 mm : 5350 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 209800 € : 3371.76 € : 20 to : 2000x1250 mm : 2000 mm : 1250 mm : 90 m/Min : 70 m/Min : 114 m/Min : 1100 1/Min : 375 1/Min : 1200 1/Min : 6 mm : 3 mm : 3 mm : 1.5 mm : 27 : 0,1 mm : 0,05 mm : 30 U/Min : 150 U/Min : 100 kg : 940 mm : 6 bar : 88.9 mm : 7.5 kW : 5600 mm : 6600 mm : 4200 mm : 6200 mm : 2310 mm : 11000 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 20400 € : 391.68 € : 80 mm : 245 mm : 3 : 4 kW : 6 m/min : 100x20 mm / 2000 mm, 80x2 : 125x25 mm / 600 mm, 60x5 : 45x45 mm / 500 mm, 15x15 : Ø 50 mm / 500 mm, Ø 15 mm : Ø 100x2,5 mm / 1.200 mm, : 80x25x3 mm / 800 mm, 25x1 : 70x70x3 mm / 1.300 mm, 25 : 80x80x8 mm / 800 mm, 30x3 : 70x70x7 mm / 700 mm, 30x3 : UPN 140 / 1600 mm, UPN 12 : UPN 140 / 1.600 mm, UPN 1 : IPN 120 / 600 mm, IPN 80 : 1450 mm : 1000 mm : 1400 mm : 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTe ...

: gebraucht : 2023 : 9691 : prompt, Zwischenverkauf v : Türkei : 24600 € : 1 : 85 mm : 247 mm : 3 : 7.5 kW : 80x20 mm / 500 mm, 30x10 : 120x30 mm / 650 mm, 50x10 : 50x50 mm / 500 mm, 30x30 : Ø 50 mm / 500 mm, Ø 20 mm : Ø 100x2,5 mm / 1.300 mm, : 80x40x4 mm : 70x70x4 mm : 80x8 mm / 1.200 mm, 30x3 : 80x8 mm / 800 mm, 30x3 mm : 1580 mm : 1200 mm : 1410 mm : 2350 kg demo machine / mint condition net price 3 driven rolls (hydromotor and planetary gear) strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions plane rolls lateral rolls (forward-backward hydraulic, rest manual) horizontal and vertical operation Control console forfor- andbackward drive machine and equipment according to theCE regulations INCL. OPTION: CONTINUOUS SPEED WE HAVE MORE THAN 235 REFERENCES! BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE W ...

: neu : 3935 : ca. 10 Wochen ab Auftrags : Spanien : 18150 € : 348.48 € : 50 mm : MK 4 : 400 mm : 54 - 1032 (9) U/min : 2.9 kW : M36 : 600 mm : 1200 mm : 2500 mm : 710 kg : 0,1 / 0,2 / 0,3 / 0,4 mm/U : 230 mm : 200 mm : 50 - 850 mm : 1290 mm : 550 x 550 mm : 1060 x 600 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality gear drilling machine cooling equipment VDE electric chuck protection left right drilling lighting front handwheel for sensitive feed table turn and tiltable user manual in GERMAN OPTIONS (PRICES ON REQUEST): manual tapping systemIR/IRS electronic speed variator with digital read out VE+TAK digital read out for drilling depth LBC ALTERNATIVE: ERLO B-50 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUEST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 € : 1840.86 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommende ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 22 mm : 22 mm : 16 mm : 19 mm : 17 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 18 mm : 18 mm : 12.1 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double line ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 118930 € : 2247.78 € : 1200 mm : 730 mm : 1.200 x 500 mm : 1.200 x 500 mm : max. 30 m/min : 3.7 kW : 27 kVA kW : 4600 mm : 3040 mm : 2200 mm : 6400 kg : 990 mm : 930 kg : 1250 kg : 405 x 50 x 127 mm : 0,001 mm : 500 - 2.000 U/min : 11 kW 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list Max. table speed (X axis) 30 m/min vertical feed by servo drive and ballscrew spindle transversal feed by servo motor and ballscrew spindle double V-slide wasy (turcite-B) for table longitudinal move grinding wheel spindle  ...

Internal grinding machine: grinding diameter: 300 mm grinding depth: 300 mm Travel distance - Z1: 470 mm Travel distance - X1: 200 mm Tilt angle - B2: 1/1000 ° power capacity: 3,5 kW External and face grinding unit (Z2/X2): Travel distance - Z2: 470 mm Travel distance - X2: 325 mm Drive power – External grinding spindles: 16,5 kW : 120 mm grinding diameter - cylindrical: 400 mm sanding belt length: 400 mm grinding wheel size: Ø 500 x 50 x Ø 127 mm Workpiece spindle unit: Travel distance - U: 470 mm Tilt angle – B1 with longitudinal adjustment: -1/+12 ° Tilt angle - B1 with workpiece spindle unit: -20/+30 ° Manual longitudinal adjustment of the workpiece sp: 470 mm Drive power – workpiece spindle: 3,8 kW turning speeds: 1-895 U/min Load capacity - Spindle head: 200 kg Centre height above the swing bridge: 200 mm total power requirement: 47 kW weight of the machine ca.: 10 t  ...

max. wheel diameter: 450 mm max. module: 4 mm internal dia. - min.: 100 mm internal dia. - max.: 300 mm Maximum permissible peeling wheel diameter: 175 mm Diameter of the installation area: 125 mm slide travel X-axis: 350 mm slide travel Z-axis: 300 mm slide travel Z-axis: 440 mm Largest swivel range of the peeling head: ±25 Grad workpiece table outer diameter: 570 mm Workpiece table – Maximum permissible load: 5 kN Feed - X: 12000 mm/min Feed - Y: 5000 mm/min Feed - Z: 8570 mm/min Tools speed: 0-3000 U/min Workpiece table speed: 0-1500 U/min voltage: 400 V Control: weight of the machine ca.: 11 t dimensions of the machine ca.: 5,85 x 8,3 x 3,8 m Technical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Fluids: - Hydraulic: 150 l - Coolant: 850 l - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg The data for this ad was cr ...

turning diameter: 250 mm turning length: 750 mm control: Siemens type: 840 c spindle passage: 65 mm Tool changer: 2 Turret 12-fold, 12 stations: Pos. c-axis: live tooling: 2x Revoler total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: m Main and counter spindle 3-jaw chuck with numerous jaws Hainbuch collets Many tool holders Various driven tools Bar loader Index MBL Chip conveyor with coolant unit Complete set of spindle reducers etc. see photo The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your busine ...

turning diameter: 420 mm turning length: 1350 mm spindle passage: 101 mm control: Siemens SL 828D ShopTurn number of controlled axis: 4 turning speed range: 3000 U/min power requirement: 22/18,5 kW rapid speed: 30 m/min number of tapers in turret head: 12/24 BMT 65 number of driven tools in turret: 12 BMT 65 Spindel speed of driven tools: 5000 U/min Spindelpower on driven tool: 7,5/5,5 kW y-axis: +/- 65 mm tail stock: MT-5 weight: 8,0 t dimensions: 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour  ...