127,904 used machines on RESALE, but how to find them? Machine Search
10 blow-up stations , max. 12,000 - 14,000 bottles/hr, volume: 0.2 - 3.0 liters, preform silo, steep conveyor and feeder, equipped for PCO 1810 x 28mm. Available at an additional cost: compressor system, mould cooler, mould and air conveying system
TECHNICAL DATA: Required space mm: 830 x 860 x H 1150 01 Vertical brush KW 0,37 Motion: right - left Weight Kg: 250
For sale Log Reducing Machine BRUKS RR800 – completely overhauled On offer is a fully refurbished BRUKS RR800 buttflare reducing machine for processing round timber. The machine has been overhauled and is ready for immediate use. It is ideal for use in sawmills, biomass plants or for pre-processing trunk wood with strong root shaping. Specifications Model BRUKS RR800 Maximum trunk diameter 700 mm measured at 1500 mm distance from the end of the trunk Minimum trunk length 3.2 m Maximum trunk length 6.2 m Maximum reduction 200 mm Capacity at feed rate 60 m per minute approx. 4 logs per minute at 60 cm diameter Capacity at feed rate 30 m per minute approx. 3 logs per minute at 60 cm diameter Number of cutting tools 30 pieces Tool width 60 mm Cutting motor 37 kW Chain drive via geared motor 2.2 kW Hydraulic power unit 5.5 kW Total weight including main drive approx. 500 ...
Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds
CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...
Modular built semi-automatic twist wrapping machine Product dimensions: Width: 50 - 730 mm Height: 20 - 520 mm Length: 750 mm to infinity Maximum diagonal: 730 mm Packing materials: PE stretch film, VCI stretch film PE film, crepe paper, etc. Width: up to 250 mm Core average: 76 mm Very good condition!
BRUKS RR 300 Root Reducer Core: - Processed wood lengths: 2.5 to 14 m (with extension part from 6 m) - Maximum trunk thickness: 900 mm (1,200 mm at root ends) - Fully automatic cross pass with integrated log ejector - Intelligent milling technology: adaptation to natural trunk shape (maintains curvature) - Flexible loading by crane/forklift + radio remote control (on request!) - Robust construction: Heavy rectangular tube frame + side hold-down arm Specifications: Reduction time per log: Ø 30 cm: 29 seconds Ø 60 cm: 37 seconds Milling unit: 45 kW motor (1,500 rpm) 36 milling blades (60 mm width, can be used on 4 sides) Drive system: 2 lower rotation chains with carriers Trunk rotary motor: 2.2 kW (8 m/min) Hydraulics: 5.5 kW / 28 l/min Weight: 4,000 kg (basic machine) + 1,000 kg (extension) Scope of delivery: - Factory tested and adjusted (incl. hydraulic ...
Siemens Vertix 3D built 2010, refurbished 2019 The offer includes the following components: 3D ceiling stand with integrated cassette holder for ENT recording Grid wall 3D hydraulic multixtable Polydoros LX 30/50 Generator with touchscreen control panel Dose area productmeasuring device Agfa CR 85X Memory Film Scanner Transportation €860.00 Installation €2500.00 Optional: Full body grid wall AGFA CR Easylift, new X-ray tube, C-bow Ziehm Vista 6 months warranty When ordering by 01.03.2020 10% discount
CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED
Specifications: Manufacturer: Weisser Type: Univertor AM-1L Year of Make: 2020 Control: CNC control Siemens SINUMERIK 840D sl Travels: X 1,700 mm Z 500 mm Spindle unit left side of the machine Speed Limit| 3,500 rpm Rated speed: 780 rpm Torque: 430/610 Nm (100/40% ED) Spindle bearing Ø: 120 mm Spindle flange: A8 according to DIN 55026 Dressing unit Max. speed: 16,000 rpm Dressing disc holder Ø: 40 x 10 mm Revolver Target turret: 12-speed Drive: electric swivel drive Internal grinding spindle with grinding software Tool holder: D28/43 (thread M28x2) Spindle bearing Ø: 45 mm in hybrid version Speed limit: 45,000 rpm. Rated speed: 30,000 rpm Drive power: 15/18 kw (100/60 % ED) Torque| 4.7/5.7 Nm (100/60% DC) External grinding spindle with grinding software Tool holder taper: 1:10; Ø 73 mm Spindle bearing Ø: 80 mm in hybrid version Speed limit: 6,00 ...
Spiral kneader Boku SK 240 A Basic overhaul basic refurbished spiral kneader Boku type SP 240 A with digital Steuerung.Es are 2 boilers in stainless steel with trolley. The kneader is suitable for a maximum of 240 kg of dough or for a maximum of 150 kg of flour.The machine has 2 speeds (slow and fast) and 2 Mixing time zones. Optionally, you can get the machine with a tipper and up to 4 boilers. Type: SK 240 AS CS for maximum 240kg of dough or for max. 150 kg flour 2 automatic timers 2 courses slow and fast Stainless steel spiral with 2 stainless steel boilers optional lye with up to 4 boilers Machine is overhauled and repainted
Universal and variable X-ray system. Mobile C-bow with 80 kW power iruund compact design. Particularly suitable for vascular diagnosis and surgery, cardiology, neurology, orthopedics, etc. Very good image quality through CCD Camera, image postprocessing, DICOM etc.
Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5
The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...
NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE 2014 Model BI-POWER VH1300 /12100 120mm Screw Calculated Injection Volume 7351 cm3 Shot Weight 6689 Grams Space between HxV Tie Bars 1400 x 1200 ASK FOR VIDEOS
Longitudinal Splicer Manufactured by KUPER Model: FL/I-1000 - FL/INNOVATION
The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm
Teigabwieger Trima TA dough divider -with disused belt -1 Piston engine -with Siemens Touchpanle control -Weight range of 250- 2800 grams -Power of 650- 1500 pieces / hour -Stainless steel hopper -can be used on wheels
Longitudinal Splicer Manufactured by FISHER+RÜCKLE
GLUE APPLICATOR Manufactured by FISHER+RÜCKLE Model: Gluemate
ERMAK RPP 1270X30 punching machine was built in 2013 in Turkey by ERMAKSAN MAKINA SANAYI VE TIC. AŞ. The machine, which is distinguished by its high productivity and precision, is used in the machining of thin sheet metal with a maximum thickness of 6.35 mm. All machining processes are performed on a large brush table by a reliable working head, which operates with a maximum force of 30 tonnes. The brush table prevents scratches and nicks on the sheet metal surface during material feed, and also significantly reduces noise level. All this is complemented by a FANUC CNC control with an intuitive interface that allows advanced machining programmes to be created in just a few steps. The ERMAK RPP 12730 CNC punching machine weighs 11000 kg. It is also possible to purchase Metalix CAD/CAM software at an additional cost of 10500 EUR net. Technical specifications of the ERMAK RPP 1270X30 ...
The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg
Manufacturer: Handtmann Type: 34-2 Turning gear HANDTMANN 34-2 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36
Gluing and Milling Line Manufactured by FISHER+RÜCKLE Model: EFA-28 Cross-feed Splicer Manufactured by FISHER+RÜCKLE Model: FL-728
- Folding stations: 1st folding unit with 6 pockets (parallel folding) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) - Folding stations: 3rd folding unit with 2 pockets (parallel folding) - Max. sheet format: 520 x 840 mm - Min. sheet format: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on folding pattern and material) - Paper weight: 40 – 250 g/m² - Fold types: single fold, wrap fold, zigzag fold, double parallel fold and much more - Feeder: Flat pile feeder (PBA) - Control: Electronic control with folding program memory - Delivery: Shed delivery (STA) - Optional: Perforating, creasing or cutting units (depending on equipment) - Format adjustment: Manual - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Particularities: - Solid construction with high precision - Suitable for ...
Manufacturer: Handtmann Type: 35-1 Turning gear HANDTMANN 35-1 for Handtmann VF 10 , 12, 16, 18 , 20 Request an offer iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT ID: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36
Key data: 250 mm, 550 mm, 145 mm
Demonstration article Condition: Mint The Superturn 550/125 Vario with MFB 16 Vario offers modern turning, milling and drilling technology for the central machining of small to medium-sized workpieces - a practical all-rounder for mechanics and model makers, vocational schools and training workshops. The basic component SUPERTURN 550/125 Vario is a lead screw lathe with an infinitely adjustable speed control and a digital speed display. The maximum turning size above the carriage is Ø 145 x 550 mm, the spindle bore diameter is 26 mm. Standard equipment: - Digital speed display - Three-jaw lathe chuck ø 125 mm, centr. - Centrifuge MK 4 - Grain tip MK 2 - Emergency stop button / zero-voltage trigger - Lathe chuck protection with safety limit switch - Chip tray / bulkhead - Toolbox / Instruction Manual / CE Specifications: Center width 550 mm Tip height 125 mm ...
Demonstration article Condition: Mint Specifications: Drilling capacity in steel 50 mm Milling capacity face milling cutter 125 mm Milling capacity end mill 40 mm Spindle holder (turning spindle) ISO 40 Speed range 40 - 2000 rpm Speed levels infinitely variable Quill stroke 65 mm Milling table grooves / width x spacing 5 / 14 x 63 mm Verical table grooves / width x spacing 3 / 14 x 63 mm Spindle projection 180 - 485 mm Table load capacity 160 kg Milling head swivel range ± 45 ° Quill spacing table 50 - 450 mm Horizontal spindle distance table 145 - 545 mm Milling table area 750x320 mm Table path X x Z 405 x 305 mm Vertical table surface 890 x 225 mm Feeds X/Y/Z 10 - 1000 mm/min Feed stages X/Y/Z infinitely variable Motor power 3700 W Torque X-axis 7.7 Nm Y-Axis Torque: 7.7 Nm Torque Z-axis 1.7 Nm Mains connection 400/50 V/Hz Cubature 750x320x450 mm Len ...
Key data: 40 mm
Demonstration article Condition: Used Premium quality MADE IN SWEDEN The gearbox is built with the traditional and tested technology for the highest possible torque. Helical gears in combination with steel against reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. Specifications: Drilling capacity in steel: 40 mm Threading capacity M28 Spindle holder (turning spindle) MK 4 Speed range 90 - 1500 rpm Speed levels 8 Quill stroke 190 mm Quill feed stages 4 Column diameter 140 mm Quill feed 0.10/0.16/0.24/0.33 mm/rev T-slots, width M14 mm Drilling table stroke 830 mm Spindle projection 330 mm Drilling table rotatable ± 360° Quill spacing base 1210 mm Quill spacing table 215 - 830 mm Drilling table area 500x400 mm Motor power (2-stage) 2200 / 2600 W M ...
Longitudinal Splicer Manufactured by Kuper Model: FL/Rapid
Intact Vacuum skin packer Model: RM571 Serial: 8215 Stainless vacuum skin packer, chamber dimensions 700mm x 500mm x 110mm, adjustable timer controls, various moulds, 3Ph
The Vax Commercial VCSD-05 is a battery-powered floor mopping machine with a capacity of 75 liters. The two 400 W brushed motors are powered by two 12 V batteries with an output of 76 ah/h. The batteries have a capacity of 3 hours, the charging time is 8 hours. The VCSD-05 is a compact floor mopping machine with a cleaning width of 660 mm. Brushes are available as a matching VCSD-05 floor brush or as a floor pad in conjunction with a VCSD-05 driver board. Due to its compact dimensions, this floor mopping machine can also be easily transported to different floors by elevator. Used cleaning machines from Heratec are all tested for functionality, cleaned and, if necessary, overhauled. Specifications: Manufacturer: Vax Type: Commercial VCSD-05 Condition: used/good Motor (Suction:) 400 W Motor (brush): 2x 400 W Capacity wet: 75 liters Capacity extraction: 80 liters Chargin ...
The used cleaning machines are all checked for functionality, cleaned and, if necessary, overhauled. Technical details: Manufacturer: Kärcher Model: BR 530 BAT, battery-powered Year of construction: 1998-2006! subject to availability Condition: very good Nominal voltage 24 V Battery capacity 75 Ah (5h) Power consumption 1200 W (1560) Suction motor power 500 W Brush motor power 600 W Suction power, air volume 30 litres/second Suction power, vacuum 140 mbar Cleaning brush working width mm 460 diameter mm 96 Brush speed 1500 rpm Theoretical area performance 1840 m²/h Volume fresh/dirty water tank 40/40 litres Total weight 150 kg Sound pressure level (EN 60704-1) 70 dB Total vibration (ISO 5349) 0.4 m/s² Built in 1998-2006! subject to availability Additional support wheels on the suction beam and at the front. We would like to point out that with regard to the ...
Machine info: Year of construction: 02/2025 Capacity: 60kg Machine Weight: 360kg Production of tempered chocolate: 130kg/h Connection: 16A CEE plug Dimensions: Width 900mm, Depth 920mm, Height 1550mm Description: The Model MAESTRIA60 tempering and coating machine is designed for tempering and coating all types of chocolate. Thanks to its small dimensions, the tempering and enrobing machine is MAESTRIA60 particularly suitable for versatile use in confined spaces. Continuous temperature control by a screw with the help of a cooling unit ensures that the chocolate is always available at the right temperature, ready for use. The machine has a heated dosing device, which is controlled by a pneumatic three-way valve, so bars, chocolates and other products can be dosed directly into moulds. By equipping the machine with the appropriate coating attachment, all confectioner ...
with vertical matrix connector Max. work-piece diameter: 140 mm Max. diameter of upset flange: 180 mm Nominal force of upset slide: 12500 kN Force on clamping slide with dies closed: 12500 kN Stroke of: -Upset slide: 460 mm -Upset slide after closing of dies: 310 mm Number of continuous slide strokes per minute: at least 32 Electric motor power: 75 kW Machine dimensions: -Length: 8035 mm -Width: 4800 mm -Height: 3575 mm Machine weight: 140 tons
Key data: 16 mm, 150 mm
KBM 16 T VARIO SET action Composed of: V-belt bench drill Model KBM 16 T VARIO 1 pcs vise 3' / 75 mm 2 pcs clamping screws T12mm 1 pcs.HSS twist drill cassette 1-13mm, 25 pcs. 1 pc. cutting oil spray 350 ml Specifications Drilling capacity in steel 16 mm Spindle holder (rotary spindle) MK 2 Speed range 340 - 2200 rpm Speed levels infinitely variable Quill stroke 90 mm Column diameter 60 mm T-slots, width 14 mm Drilling table stroke 275 mm Spindle projection 150 mm Drilling table swivel ± 45° Drilling table rotatable ± 180 ° Quill spacing table 360 mm Drill table area 243x243 mm Motor power 550 W Mains connection 230/50 V/Hz Cubature 195x195x360 mm Base plate area (lxw) 250x415 mm Height (total) 910 mm Weight 42 kg
Mantle Packaging Stainless manual tray sealer, twin tray operation, temperature and timer controls, tray dimensions 270mm x 280mm, 1Ph
used
Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine
used
AMADA EUROPE 255 CNC punching machine was built in 2004 in France by AMADA EUROPE S.A.. The machine, designed for machining thin sheet metal of a maximum thickness of 3 mm, is distinguished by its high efficiency and reliability. In order to obtain the highest precision of the produced parts, all the machining processes are performed on a large brush table. This table, thanks to its design, prevents scratches and nicks on the sheet metal during the material feed, and also significantly reduces the noise level. The EUROPE 255 punching machine is also offered with extensive equipment, including e.g. a cooling unit, light curtains and an advanced GE FANUC CNC control. The total weight of the machine is 11000 kg. Technical specifications of the AMADA EUROPE 255 punching machine - maximum press force: 20 t (200 kN) - feed in the X/Y axis: 1280/1320 mm - feed rate in the X,Y axis: 82 m/m ...
AMADA VIPROS 2510 KING CNC punching machine was built in 1998 in Japan by AMADA CO., LTD. The machine, distinguished by its extensive machining capabilities, is an excellent choice for the production of precise parts with the highest quality. It is capable of punching holes in sheet metal made of, among others stainless steel and aluminium, with a maximum thickness of 6.4 mm. The machining process is performed on a large brush table, which prevents scratches and scrapes on the sheet surface, and also significantly reduces noise level. All this is completed by an intelligent FANUC CNC control in which the most advanced machining programmes are created in just a few steps. The AMADA VIPROS 2510K punching machine weighs 11000 kg. Technical specifications of the AMADA VIPROS 2510 KING punching machine - CNC control: FANUC Series 18-P - maximum press force: 20 t (196 kN) - feed in the X ...
Bearing number: 3488 Profile steel shears Manufacturer: Mubea, Type: KBLH 500 Machines NR.: 0156085927332, Year of construction: 0 Specifications: Size Printl 50 To Max punching dia 30 x 15 mm mm Stroke length 0-60 mm Number of strokes per min. 16 Extension 410 mm Flat steel 180 x 20 - 400 x 10 mm Angular steel 50 mm Round steel 55 mm Total power 7.5 kW Hydraulic. Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg
The UCC 548 is a productive and flexible high-speed model. This machine is characterized by its ability to produce a wide variety of fabric weights and designs – perfect for smaller, ever-changing markets. Thanks to its outstanding efficiency and quality, the Terrot UCC 548 has gained international recognition and is established on the market worldwide. Features: - Made in Germany: Maximum efficiency and precision for reliable production. - Flexible application options: With 1.6 feed points per inch and a speed factor of 800, production is extremely efficient and adaptable. - High-quality inserts: Integrated guides enable safe processing even with long thread runs. - Versatile technology: The machine is available with a choice of 2-way or 3-way technology in the cylinder control rail, allowing for a wide range of applications. - Great design flexibility: Two needle marks i ...
Key data: 400 mm, 1000 mm, 235 mm
Universal lathe PREMIUM CU 400 RD - Vario Center width 1000mm incl. RÖHM lathe chuck Standard equipment: - RÖHM three-jaw lathe chuck - Quick-change steel holder set, 5 pieces - Halogen machine lamp - Emergency stop button / zero-voltage trigger - Lathe chuck protection with safety switch - Tool carriage with splash guard - Base frame / chip tray / bulkhead - Tool Kit / Instruction Manual / CE Specifications Center width 1000 mm Center height 200 mm Turning diameter over bed 400 mm Turning diameter over carriage 235 mm Turning diameter without bridge 550 mm Machine bed width 320 mm Cross slide travel 235 mm Upper slide travel 110 mm Lathe bit cross-section, max. 25x25 mm Lathe chuck holder DIN 55027 No. 6 Spindle holder (rotary spindle) MK 6 mm Spindle bore 52 mm Speed range 1, infinitely variable 18 - 98 rpm Speed range 2, infinitely variable 48 - ...
Key data: 330 mm, 1000 mm, 198 mm
Universal lathe PROFI 1000/165 incl. 3-axis position indicator incl. RÖHM lathe chuck incl. quick-change steel holder 'Set', system Multifix with electromagnetic motor brake Ready for operation: incl. oil filling, Completely assembled and test run carried out Standard equipment - RÖHM three-jaw lathe chuck Ø 160 mm - Four-jaw face plate chuck Ø 200 mm - Clamping disc Ø 300 mm - 2 fixed centering tips - Moving center punch MK 3 - Tracking bezel - Standing bezel - Quick-change steel bracket set ME - Threaded clock and interchangeable gear set - Halogen machine lamp - Emergency stop button / zero-voltage trigger - Lathe chuck protection with safety switch - Base frame / chip tray / bulkhead - Tool Kit / Instruction Manual / CE Specifications Center width 1000 mm Center height 165 mm Turning diameter over bed 330 mm Turning diameter over slide198 mm Turnin ...
maximum number of results exceeded
please refine your search
