bakery machines used for sale

PHILIPS Series 2300 LatteGo EP2331/10 – Fully Automatic Coffee Machine The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-47023-124

PHILIPS Series 2300 LatteGo EP2331/10 – Fully Automatic Coffee Machine The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-47023-111

PHILIPS Series 2300 LatteGo EP2331/10 – Fully Automatic Coffee Machine The products have not been tested for functionality. They may have scratches, dents, incompleteness, or general signs of wear. Visit us on the day of the inspection to get an exact picture of the reason for the return. Shipping is also possible. For more information, please contact us. Auction-ID: A1-47023-132

GeneralUniversal Machining Centre with rotating viewing panel and Electronic handwheel; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/40/40 m/minWorking area 1Longitudinal2100 mmCross2100 mmVertical1250 mmMiscellaneousClamping SystemDIN 69872 Tool changerApplicationUniversal Type of magazineChain Type of gripperDouble gripper Universal milling head with controlled B-axisUniversal milling head with controlled B-axis SK 50 Continuously positioning universal milling head (B-axis) with integrated motor spindle for 5 axes positioning and simultaneous machining. - swivel angle: from horizontal position to max. 250° (70NC rotary tableType of Measuring system Direct measuring systemNumber of Slots 13Slot width 18 mmMaximum load (table centre) 8000 KgCentre bore 50H6 mmTab ...

GeneralUniversal Machining Centre; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1600 mmCross1600 mmVertical1100 mmTool changerApplicationHorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools60 MiscellaneousClamping SystemDIN 69872 NC rotary tableType of Measuring system Direct measuring system4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 15 rpmDistance between T-Slots 125 mmNumber of Slots 9Slot width 18 mmMaximum load (table centre) 4500 KgCentre bore 50H6 mmTable surface Ø 1600 x 1250 mmChip removal2 worm conveyors in the machine bed convey into a chip conveyor (scraper type conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: 580 ...

Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories:, Total enclosure,, SK 40 or 50 workpiece carrier according to preference,, Cooling unit for dielectric,, Automatic fire extinguishing system,, Measuring probe,, SK 40 or 50 measuring mandrel depending on workpiece carrier,, Alphanumeric keyboard for data management,, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions,, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes,, Software package for profile tools, 4-path program for peripheral electrodes,, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries,, Automatic central lubricat ...

Key data: 1500 kN, 184 g/PS, 40 mm

Arburg 470C-1500-400 Injection moulding machine with sorting flap (256) Number: 256 Availability: in stock Year of production: 2014 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Clamping force [kN]: 1500 Gap spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Minimum mould height [mm]: 250 Control Type: Selogica Tongue: English, German Installed power [kW]: 30.4 Working time [h]: 50.512 Weight [kg]: 4850 Dimensions [mm]: 4500×1700 Feed hopper: NO Core string: 2x Robot connection: 67 Euro Air Valve: Yes

Envelope Tenoning Machine Bacci TSG 2T Spindle speed 6000 rpm Maximum trunnion width mm 115+2R Trunnion depth: 10 – 45 mm Table upwards, tilt angle: 0° – 15° Table tilt downwards: 0° – 30° Table side inclination angle: 0° – 20° Machine Weight 1050kg Machine dimensions 1500x1150x1350mm

Used packaging machine type: XPG-40. New 2017. Technical specifications: Capacity: up to 90 packs/min Power: 2.2 kW Dimensions: 3030 x 2700 x 1800 Weight: 1600 kg

Tecnomax Formula SP2 thickness gauge Working width 630mm Working height 300mm Electric lifting and lowering of the worktop 4-blade shaft Traditional knives 4 feed speeds 5/8/12/18m/min Sinikg main with a power of 5.5kw Extraction port fi150 Net price

Inv. Num. : 9157 Type: SK 12 Producer: TOS Created: 1963 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece diameter: 1250 mm Max. workpiece height: 1000 mm

Code: 0308 Brand: AGLA Model: 900 Roll polishing machine for polyester and varnish - It is suitable for buffing of high gloss polyester or polyurethane paints, metals, marble and similar materials Sturdy structure Table dimensions mm 2950 x 850 Working width mm 900 Working height mm 700 Brush diameter mm 300 Motor Hp 10 Automatic table lifting Overall dimensions mm 3100 x 1750 x 1650 h Weight kg 1200

Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t

Designed for aluminum wires, gold wires and ribbons. • Large connection area of 13.5cm x 13.5cm. • Constant cable length with fine adjustment on the control panel. Auction-ID: A1-47049-64

QUANTUM MACHINES Q250_EU QSwitch with Fisher Connector_EU QSwitch is a versatile low-frequency signal routing box that integrates seamlessly with your existing setup. Auction-ID: A1-47049-201

Biscuit dosing machines Comas DLV 450 Year of Make: 2008 Condition: very good Siemens control system Working width: 450 mm

HYUNDAI WIA L280 CNC Lathe Year of construction 2017 Control SIEMENS 828D Turning Ø over bed 590 mm Rotary Ø max. 410 mm Turning length 720 mm Spindle nose A2-8, speed 3,000 rpm. Spindle 22/18.5 (30min) kW Torque 729.5/613.5 (30min) Nm Travel X - 220 mm Travel Z - 750 mm Equipment: SIEMENS 3D Simulation SIEMENS Shop Turn Dialog Programming C-axis Hinged belt chip conveyor with side discharge 10 Tool Positions (BMT55) Three-jaw chuck Ø 310 mm Foot switch chuck Manual tool button Manual tailstock with hydraulic quill Coolant tank 180 L Standard coolant nozzle USB and Ethernet interface Monochrome signal light Included in delivery: Complete set of VDI mounts Assortment of turning tools Grain tip Tool cabinet with contents Operating Instructions/Documentation Machine parameters on USB stick Technical data & manufacturer's brochure – see PDF. All  ...

Leadermac Platinum 623 four-sided planer Working width 15-230mm Working height 10-150mm Number of spindles 6 Spindle system Down 7.5kw Left 7.5kw 7.5kw rights Top 11kw Top 11kw 11kw pit The first roller in the countertop grooved for wet wood Number of rolls in the worktop 3 Pneumatic Material Clamps Feed speed adjustable by inverter 6-30m/min Net price

ASB 50MB V2 injection blow molding machine Year : 2005 Working hours : 59 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. It has a completely new pump motor and pump. + auxiliary equipments

ASB 50MB V2 injection blow molding machine Year : 2006 Working hours : 30 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. The pumps have been replaced with new ones. + auxiliary equipments

Inv. Num. : 5004 Type: SPR 63 CNC Producer: ZPS Generated: GO 2008 Parameters: Control system: SIEMENS Sinumerik 840 D PCU 50 Maximum turning length: 250 mm Maximum turning diameter over bed: 470 mm Spindle diameter: 75 mm Motor power: 30 kW Minimum spindle speed: 35 1/min Maximum spindle speed: 2300 1/min Length: 3500 mm Width: 1800 mm Height: 1940 mm Weight: 6500 kg

ASB 50MB V3 injection blow molding machine Year : 2009 Working hours : 33 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. The pumps have been replaced with new ones. + auxiliary equipments

2019 Hurco VMX 42i Vertical Milling Machine. Less than 100 hours on machine. Machine has been stored in heated building. Boasting a 24-inch Z-axis travel bed and a 42-inch X-axis travel bed, 24-inc Z verticle travel. Equipped with 12,000 RPM, CAT 40 spindle taper and a powerful 24 hp spindle horsepower. 30 station automatic tool changer. Wired for 220 V power source. Magnet shown in video not included in sale of machine. Renishaw tool and part probe.

The machine is in perfect condition

Machine is in full working order. It runs great and requires nothing. It is supplied with: 3 jaw chuck with both internal and external jaws 4 jaw independent chuck Drill chuck for tailstock Revolving centre for tailstock 56T gear for MOD threads Quick change tool post with 6 tool holders - 4 are standard holders, 1 parting blade holder and 1 is 1MT

Turning and milling machine combined in one machine. The most stable table milling machine in the world! Machine tool MD-23 Rotary equipment: - complete tailstock - Three-jaw chuck with jaws stepped inwards and outwards - Turning tool holder - matching feed flange Horizontal milling device: - milling shaft - Counterholder including fastening rails Tools and clamping devices - Machine vice - a selection of cutters and holders - different rotating center punches - two boring heads - Cone wiper - Clarkson collet holders - ER32 collet holders And original Waldmann machine light

3 Axis CNC Flatbed Router Cut 1500mm x 3000mm sheet materials. 2 vacuum pumps to hold down your materials. Matrix Table Vacuum Holding System with T-Slot. 6 Tool Auto Changer. 2 Bag dust collection system. High-performance 9.0 kW air-cooled spindle ER32 auto tool changer with 6 positions. Max 24,000 rpm spindle. NK105 DSP control with pendant USB input hand controller Selection of cutters to get you started. Also have offcuts of MFC sheets for you to practice on. 3 Phase machine - requires 32A 3 Phase Type D rated MCB The machine is in overall great condition.

Has a 14" wide by 7.5" depth working limits. Works great with no issues! Features listed below. -10 tool ATC Automatic Tool Changer -Power Draw Bar -Flood coolant -Fog Buster Coolant -All Tool holders and Tooling shown in pictures. -4th Axis w/ 4 jaw chuck -Vise -One way needle bearing tool holder for tightening and loosening tools (fabricated on this machine in picture) -Tool chest with everything in it. (endmills, tool holders, fixturing, tool setting, lubricants)

Includes various accessories, including welding wire and welding caps Auction-ID: A1-43894-42

Worktable size 710x710 mm, including cabinet with various accessories Auction-ID: A1-43894-4

HORIZONTAL BORING AND MILLING MACHINE IVO LOLA RIBAR BH 90 Working spindle inside ISO ISO 50 Number of rpm from 20 do 2000 min-1 Working table 920 x 1000 mm Z-axis 1000 mm X-axis 1000 mm Y-axis 800 mm Machine move from 0,03 till 12 mm/1 rpm Machine weight 9.500 kg Auction-ID: A7-47067-15

Kallfass universa 5050 sealing machine Kallfass Compact 650 Shrink Tunnel year 2000 welding width 525 mm Clearance: 150 mm speed up to 35 cycles per minute fully automatic

Impressions=0 m, Condition= Very Good , Availability= 2026-05-27, Cutting size 780mm Air Table Side table with airblowers 2 extra knifes Programmable Electrical Power Input: 2 KW Feeding depth: 780 mm Feeding height max.: 120 mm Machine size: Length: 1,915 mm, Width: 1,550 mm, Height: 1,450 mm Total weight: kg 1,300 / lbs 2,866

Equipment: Joining milling unit 2 x 0.75 KW 200 Hz Gluing unit A3 (standard application unit, magazine for rolls and fixed lengths and pressure zone with 3 rolls) Cross-cut unit straight 2 x 0.18 KW Milling unit 2 x 0.27 KW counter rotation Profile scraper blade Glue joint scraper blade Easytouch control system Technical data: - Workpiece width min: - At workpiece thickness 8-22mm ¦ 70 mm - For workpiece thickness 23-40mm ¦ 120 mm Depending on the workpiece length - Workpiece protrusion ¦ 38 mm - Workpiece thickness ¦ 8 - 40 mm - Edge height max. = workpiece height ¦ + 5 mm - Edge material roll ¦ 0.4 - 3 mm - Edge cross-section max. - For PVC ¦ 135 mm² - For veneer ¦ 100 mm² - Roll diameter max. ¦ 830 mm - Strip edge material ¦ 0.4 - 3 mm - Edge cross-section max. For strips ¦ 135 mm² - Feed rate ¦ 8 m/min - Working height ¦ 950 mm - Pneumatic c ...

Reinforcing Steel Bending Machine (Bar Straightening Machine) probably Muhr and Bender or Peddinghaus Adjustable for steel up to 16 mm diameter

Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. -Up to about 30 straps per minute. -Frame inner dimensions approx. 850 x 800 mm. -Firm strapping by 12 mm tape. -Automatic belt forwarding and belt return. -Strap tension adjustable. -Triggering: strapping via hand button or foot switch or alternatively automatic mode selectable (sensor in the table top). -Uncomplicated and ergonomic bobbin changing and threading system. -Designed with ergonomic roller conveyors on the table surface. -Working height approx. 820 mm. machine can be moved and locked via castors. The machine can be demonstrated under power.

Key data: 480 mm, 785 mm, 45 1/min

Control OKUMA ... OSP-P300LA Turning diameter... 480mm Turning length... 785mm Inclined bed Axis Y ... 115mm Sub-spindle Spindle bore ... 80mm Tool turret ... 12/12 Bar Feeder Axis X ... 260mm Axis Z ... 510mm Spindle speed ... 45-5000 rpm. Speed of the driven tools ... 45-6000 rpm Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis ... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power ... 22kW L x W x H ... 3330 x 1800 x 2250 mm Machine weight ... 5250kg Chip conveyor

Key data: 2040 mm, 6 mm

Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Motorized adjustment of the bending beam with digital display (adjustment of the sheet thickness) Manual backgauge with spring fingers up to 1500 mm 5700 kg

Professional packaging machine from a renowned European manufacturer, equipped with many options and adjustment options. Suitable for packaging food (baked goods, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. Setting options: -Only "welding" or alternatively "welding and subsequent shrinking". -Welding time adjustable. -Shrink temperature adjustable. -Shrink time adjustable. -Holding time adjustable. program memory. Other characteristics: -Needle perforation via adjustable needle rings possible. -Maximum package size theoretically approx. L 550 x W 400 x H 200 mm. -Maximum film roll diameter approx. 300 mm. -Maximum film roll length approx. 600 mm. -The machine can be pushed or fixed via lockable castors. Special features/ options: -Automatic residual film rewinding -Second foil ro ...

Offer 26148 Technical data: - Pressure capacity 420 KN / 42 t - Stroke length 0 - 300 mm - Lifting speed 0 - 0.6 m/min - Tool height 200 mm - Bending performance - with prism MW 125 flat approx. 200 x 16 mm - with prism MW 240 flat approx. 200 x 24 mm - Tube bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - For angle programming + length programming - Controlled length stop 3000 mm - Various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Professional packaging machine from a renowned European manufacturer for adhesive tape width up to 50 mm. Maximum carton dimensions approximately: width 525 mm x height 505 mm; length unlimited. It is a robust machine for the highest requirements. -Closure of the package on both sides at the top and bottom with adhesive tapes. -Transport speed up to about 20 m/min. -Different cardboard formats are infinitely adjusted in height and width via a quick adjustment system (without crank). -The working height is adjustable from 635 to 950 mm. Special features/ options: -The scope of delivery includes an inlet track with a length of about 1 m and an outlet track with a length of about 1 m. There is a stopper plate on the run-out track, which can also be dismantled if necessary. Both roller conveyors are adjustable in height and inclination. -The machine has an adjustable closing device fo ...

Inv. Num. : 9163 Type: MAH 40/3 CNC Producer: AMOB Created: 2022 Parameters: Diameter of the cylinders: 148 mm Length: 1200 mm Width: 770 mm Height: 1450 mm Weight: 540 kg Hydraulically controlled upper roller feed Can be used vertically and horizontally 3 mechanically driven rollers Side rollers (manually adjustable) Adjustable control pedal 3 standard rollers

Automatic circular saw sharpening machine completely overhauled. For fully automatic sharpening of HM circular saw blades, of all common tooth shapes. Equipped for oil cooling, fire extinguishing equipment. Technical data: Circular saws Ø with robot 130 to 600, without robot 130 to 840 mm, tooth pitch with robot 8 to 50 mm, without robot 8 to 120 mm. Available on request with loader robot ND 230, extraction system.

PETER WOLTERS AC1200-P Double-sided polishing machine Working hours: 14713 2016 vintage PETER WOLTERS AC 1200F Grinding machine Copper pipe leaking Spare parts for copper pipe Working hours: 2024 2017 vintage PETER WOLTERS AC1200-P Polishing machine Water pressure sensor currently nonfunctional Working hours: 10041 2017 vintage PETER WOLTERS AC 1200F Grinding machine Working hours: 5625 Cooling board currently nonfunctional 2016 vintage (4) units of Peter Wolters AC 1200 systems (2 polishers, 2 grinders), but the seller is coming down on price and I wanted to make you aware of the discount as these are going to be the cheapest AC 1200's we've ever sold. All of the machines are complete and still installed at the seller’s site, but they no longer need these in their process, so they are available for immediate release at a discounted price to facilitate a ...

Chest grinding machine for HM circular saw blades. Completely overhauled and painted. Suitable for oil and emulsion cooling. Saw blade Ø 150 - 1000 mm, tooth pitch 0 - 120 mm.

Aigner guides. Feeder.round router protection. Auction-ID: A1-47074-1

Condition unchecked Auction-ID: A7-47109-83

Auction-ID: A1-46873-14

Hello, for sale here is a milling machine of the Reckermann brand. This milling machine is a FU 1000 and has a horizontal and vertical spindle. Furthermore, it has a digital display from Heidenhain, automatic feed including rapid traverse and a bobbing spindle. These include a collet set in mint condition, a drill holder and a small cutter head. If you have any further questions, please contact us. Loading is no problem.

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43538-17039