bakery equipment used for sale

2.1.1. Walk-in cleaning booth, pre-treatment for steel and aluminium The cleaning booth is designed for automatic cleaning. Spraying can be done at medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cab length 6,500 mm Width 3,000 mm Height 3,600 mm 2 dimensions of the pre-treatment complete Length 6,600 mm Width 4,640 mm Debpm0Nom Height 4,300 mm 2.1.1.1. 1. Degreasing/Neutral Pickling Process Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.2. 2. Process Acid Mineral Pickling Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.3. 3. Rinsing Process 1 in this chamber rinsing is done at ambient temperature, time = 0.75-1.5 minutes, draining time = 1 minute 2.1.1.4. 4. Rinsing Process 2 in this chamber is rinsed at ambient tem ...

Powder coating plant oven, cabin, etc. Powder Coating Booth Open Spray Stand Dimensions of powder level Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 pc. 6000 m³/h Power 3 kW (electric motor) Filter 4 type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 Pcs. 1" "Turbo" Italy Absolute filter 1 pc. type bag filter Powder Pistol Wagner "Prima Sprint" Mains Standard 230 VAC Frequency 50 – 60 Hz Input compressed air 6-8 bar Output compressed air 0.05 – 5.5 Nm³/hr. Powder curing furnace Inner dimension length 3,225 mm Inner dimension width 1,400 mm Inner dimensions height 2,000 mm Insulation rock wool 150mm [75 Kg/m³] Temperature max. 220°C Fans 1 pc. 4,500 m³/h Electric Motors 1 pc 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal power 39 kW Doors on both sides 2 pcs. Manual, insulated with rock wool 150mm 70Kg/m³ Heati ...

.1.1. Powder Coating Booth, Open Spray Stand The overspray during powdering is absorbed by the extraction unit. The powder spray stand is delivered on rollers and is therefore mobile. - The extraction system is equipped with a 60 L powder container (rollable). - As a 1st stage, there are 4 filters in the extractor. - Above the cab is the absolute filter. 1 Dimensions of the powder stand width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filters Φ 325x800 4 pcs Type Filter Cartridges 4 Electromagnetic Valves 2 pcs 1" "Turbo" Italy 5 absolute filters 1 pc. type pocket filter 2.1.2. Powder curing furnace Mzlxwbat 1 Inner dimension length 4,000 mm 2 Inner dimensions width 1,500 mm 3 Inner dimensions height 2,200 mm 4 Outer dimensions incl. thermoblock length 5,250 mm 5 Outer dimensions incl. thermoblock width 2,050 mm ...

Powder coating system for large parts Example:(all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Cleaning booth walk-in incl. spray wreath automatic 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Mass of tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm Height 4,200 mm Coating booth walk-in, manual coating Lmmuapd8S 1 Dimensions cabin length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the cabin including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing furnace 1 Inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 Outer dimensions incl. thermoblock length 7,600 mm 5 Outer dimensions inc ...

1.Powder curing furnace 2,000 x 1,900 x 2,000mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Inner dimension height 2,000 mm 4 Outer dimensions incl. thermoblock length 2,300 mm 5 Outer dimensions incl. thermoblock width 2,300 mm 6 Outer dimensions incl. thermoblock height 2,700 mm 7 Substructure 1 set of steel profile 50 x 50 mm 8 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5005 9 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 10 floor stove gets 2 entry rails for tray wagons 11 Temperature 220°C 12 fans 1 pc. 6,000 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal output 36 kW = 30,960 kcal/hour 15 wing doors on one side 2 pcs insulated with rock wool 150mm 70Kg/m² Heating Indirectly via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 heat-resistant fans and heat-resistant bea ...

1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 2. Powder Coating Booth -KG DUO-01 3. Wagner powder coating plant, – Prima Sprint – 1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 1 Inner dimension length 1,500 mm 2 Inner dimensions width 1,200 mm 3 Internal dimensions height 1,750 mm 4 Outer dimensions incl. thermoblock length 2,250 mm 5 Outer dimensions incl. thermoblock width 1,815 mm 6 External dimensions incl. thermoblock height 2,006 mm, 2,296 mm incl. exhaust pipe 7 Substructure 1 set of steel profile 8 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 9 insulation walls, ceiling 1 set of rock wool 150 mm, floor is insulated with 50 mm 10 Floor Furnace Gets 2 Entry Rails for Tray Wagons 11 Temperature 220°C 12 fans 1 pc. 2,600 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal power 14 kW 15 hinged doors, single ...

Powder furnace el. or gas Powder curing furnace 6,500 x 1,900 x 2,000 mm 1 Inner dimension length 6,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 7,500 = 15,000 m³/h 10 electric motors 2 pcs 2x 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 110 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device fo ...

The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Powder curing furnace Conveyor technology (cycle method) Electrical control Overall length: 30,000 mm Overall depth: 4,300 mm Width: 6,500 mm Workpiece weight (max.): 100 kg Temperature: 220 °C Heat output: 80,000 W Workpiece width (max.): 800 mm Workpiece height (max.): 1,200 mm Workpiece length (max.): 2,500 mm Insulating material: Mineral wool 75 kg/m³ Insulating thickness: 150 mm

Powder curing furnaces in various sizes, gas or electric 1 Inner dimension length 1500 - 6,500 [mm] 2 Inner dimensions width 1700 - 1,900 [mm] 3 Inner dimensions height 2,000 [mm] 4 Steel profile substructure 5 walls Galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Floor furnace gets 2 entry rails for tray trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 electric motors 1 - 2 pcs 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal power 14 - 99 [kW] 12 hinged or sliding doors on one or both sides 2 - 4 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock Stainless Steel INOX AISI 316 Heating Electric or Gas Heat-Resistant Fans and Heat-Resistant Bearings, Thermoblock Has Overheating Protection

Used ISERNHÄGER Sourdough Line ASB 600 RM - 3pcs available - Capacity 600 litres Visits and test runs are possible by arrangement.

COMPONENTS OF THE SYSTEM Preheating oven Powder coating booth Fluidized Bed Powder Coating Lifting system Automatic Transport System – Conveyor Belt C-80 Electrical control and installation Transport and assembly Fluidized Bed Powder Coating Booth The powder is fluidized in the fluidized bed vessel when the part is preheated and positioned over the fluidized bed container. The lifting system lifts the fluidized bed tank and the part is coated. After the coating process is completed, the fluidized bed is lowered again and an air blowing system blows off the excess powder on the part. The process can be carried out fully automatically. The cab's system is designed for powder coating with powder recovery and consists of a powder chamber for powder application, a monocyclone and a post-filter for extracting powder residues Chamber dimensions Length: 2000 mm Width 1 ...

Powder coating plant (complete) with 3 zones of chemical pre-treatment and Hybird ovens (dryer and curing oven) Gas and electricity (gas or electricity also possible) The facility consists of: Chemical pre-treatment with reverse osmosis system Dryer with hybrid thermoblock Walk-in coating booth with extraction unit KG PSW 8000 Powder curing furnace with hybrid thermoblock Conveyor system with transverse displacement, manual Electric control unit Specification of production Type of workpieces varies Material of the workpieces Steel (other metals or multimetal possible on request) Maximum weight of the load carrier 200 kg System type: Manual conveyor Dimensions of the maximum workpiece in the curing furnace Max. length 3000 mm Max. width 1500 mm Max. height 1500 mm Dimensions of maximum workpiece in chemical pretreatment Max. length 3000 mm Max. width 800  ...

-Sourdough Fast Fermenter -Model: BRSSF100 -Mobile on castors -completely in stainless steel -400 volts -1.5 kW -Year of construction 2012 -External dimensions approx.: 64x70x125cm WxDxH

Pneumatic semi-automatic filling machine. Dosing volume: 50ml to 1000ml.

Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock

Dimensions: Length: 7400 mm Width: 4000 mm Height: 3236 mm Extraction capacity: Q = 18000 m³/h P = 15 kW The cabin has a suction machine with filters to suck the powder from the cabin floor. The powder booth is set up in a pit to lower the entire height of the painting line. Manual doors are installed to enter the workpieces into the cabin. The overspray is extracted during powder coating via the floor. On the floor there is a grate for walking on and under the grate there is a second flat floor with automatic self-cleaning system, connected by air ducts with post-filter. A self-cleaning system automatically blows the powder from the bottom to the post-filter (suction machine) and consists of

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Chemical pre-treatment 3 zones for powder coating with spray ring (automatic) and manual Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Max. workpiece dimensions (automatic): Length: 6500 mm Width: 1000 mm Height: 2300 mm Max. workpiece dimensions (manual): Length: 6500 mm Width: 2500 mm Height: 2300 mm Tanks are positioned at ground level with a sloping floor. Tank No.1 is thermally insulated and is heated by electric heaters. Achievement: 27 kW. Volume of each tank = 1.00 m³. For degreasing (1st tank), a medium pressure pump is used to operate the 1st spray system. The rinsing phases are also operated by a pump with medium pressure via the 2nd spray system. On the bottom i ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile

Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Extraction capacity: Q = 18000 m³ P = 15 kW The cab has 2 doors on one side for the insertion/outlet of the workpieces. The components are pushed into the cabin for coating via the overhead transport system. Walls, ceiling and doors are made of panels. The filters positioned on the roof absorb dust and other particles from the outside, thus ensuring clean ambient air in the cabin. The overspray during powdering in the cabin is absorbed by the extraction unit

Siebler Stick Pack packaging machine with counter for counting and packing of micro tablets, 1 lane (more lanes available on request), capacity up to 30 sticks per minute. New machine

Ultimate sealing flexibility with dual impression

Salvagnini Mod. Performer Year 2000 Manual loading Manual blades

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

ADIGE BLM LT652 Model : LT652/B Year of Manufacture : 2002 Laser Generator: DC025 (2500 Watts) Loading Length : 6500 Drain Length : 4500 Hours of Electrical Panel : 60433 Tension Laser Ore : 62285 Chiller : recently replaced Disassembly options - available now.

Coupon holder; suitable for Vacuumatic Vicount 3 machines. Coupon holder; used for Vacuumatic Vicount 3 machines.

Paper counting machine Vacuumatic Vicount 3 PB; serviced and inspected by Vacuumatic Customer Service; compressor overhauled; Air table 76x144cm; Touchscreen; Max. Counting speed 2500 rpm; Max. Stacking height 220mm; Paper weight 25-240g/m2; strip bullet hole; low meter reading 1.7 million Paper counter Vacuumatic Vicount 3 PB; checked and tested by the support of Vacuumatic; compressor rebuilt; air table 76x144cm; touchscreen; max.counting speed 2500 rpm; max.pile hight 220mm; paper weight range 25-240g/m2; tape insert; low counter 1.7 million

Brand: Rollepaal Pipe Extrusion Technology B.V. Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

Machine type: MIG/MAG welding machine Make ESAB Type LAN 400 Connection voltage 3 x 400 volts Adjustment range 45 – 400 amps Duty cycle 60% ED at 400 amps 80% ED at 355 amps 100% ED at 315 amps Current setting 40 switching levels 3 chokes for the ground cable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feeder 4-roller drive Fuse 20 Ampere Dimensions L x W x H 900 x 700 x 990 mm Weight 192 kg Age approx. 15 years Condition workshop tested, good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 Piece Instruction Manual Warranty: 6 months from the date of delivery List factory price from stock €6,900.00 + VAT Pr ...

Screw packers for valve bags Stainless steel Suitable for food and pet food Revised and Function Tested Incl. net scale and new B+L weighing electronics Suitable for valve bags from 10.0 kg - 50.0 kg

Shaft test device, concentricity tester PAGUS Span: max 460 mm Center height: 72 mm with quick-release device ! used ! Dimensions: 700 x 390 x 255 mm

BRABENDER Moisture Analyzer Semi-Automatic HA includes setting thermometer and 10 sample dishes overhauled and adjusted by our laboratory specialist partner Control thermometer and weight set new Sekutest DGUV V3 newly calibrated

Offer 24367 Specifications: - Orbital welding machine AXXAIR SALS 150 ( AIR LIQUIDE Prestotig 180 ) - Cooling unit ACW 015 ( SAF Prestocool ) - Circumferential seam welding device AXXAIR CC 220 with motorized concentricity - Raw cutting machine AXXAIR CC 80 -Trolley - Table height 830 mm - Connection 220 V - Space requirement approx. W 1400 x H 1450 x D 1000 mm - Weight approx. 150 kg

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...

Sourdough mixer Kitzinger Sourmat 300 - Stainless steel sourdough stirrer - Kitzinger - Type: Sourmat 300 - 400 volts - with drain tap - on castors - Shell inner diameter: 72.5cm - Shell height inside: 64.5cm

UNOTECH package press from 2018 with approx. 13 - 14,000 Bh. and a sufficient package of wearing parts. the baling press is designed for baling of metal cans and metal blanks Find more here - /

Sourdough - Fast - Fermenter Model: Hema BRSSF 100 with external LED control approx. 20 - 100 kg total rye flour for approx. 60 kg sourdough with timer Stainless steel version, mobile Agitator removable at the bottom Connection 400V, 1.5 kW, 16A-CEE plug Dimensions: 640 x 700 x 1250 mm Used machine cleaned 3 months warranty + spare parts service Option: Maintenance contract Service Package Instruction & Commissioning You will find a large selection of bakery equipment with us!

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

NEW- Unused Beckman Coulter Automate 1250, a high-performance liquid handling system that is designed to meet your laboratory´s needs for precision, accuracy, and flexibility. The Beckman Coulter Automate 1250 is a fully automated liquid handling system that can handle a wide range of volumes, from nanoliters to milliliters, with unparalleled accuracy and precision. It is equipped with a variety of features that make it easy to use and highly reliable, including a touch screen interface, integrated bar code reader, and automated tip loading and unloading. With the Beckman Coulter Automate 1250, you can streamline your laboratory workflow and increase productivity. It is ideal for a wide range of applications, including sample preparation, assay development, and high-throughput screening. Its flexibility allows you to perform a variety of assays, including ELISAs, PCR, and cell-based  ...

Steam Turbine 1 and major components Plant part Manufacturer Year of construction techn. data turbine VEB EKM 1970 generator VEB EKM; VEB Bergmann Borsig 1970 31250 kVA x 6,3 kV condenser VEB EKM 1970 "Bearing oil plant, pumps, "VEB Apparatebau Leisnig-Tragnitz; Filter Cooler" VEM, Siemens, VEB EKM and KSB" 1969 Steam jet cleaner Wilhelm Wigand ca. 1970 Condensate pumps VEB EKM ca. 1970 Find more here - / Contact us at -

BD FACS Aria Fusion Systems BD FACSAriaTM Fusion Measuring Stand, Type 2 Laser 5-3 with the equipment: Safety workbench 1 BD FACSAriaTM workstation incl. BD FACSDivaTM software 1 Norton GhostTM license for data backup 1 USBII HardDisk 500 GB 1 19" LCD flat panel display 2 Xerox 8570N Colorcube Solid Ink Printer 1 BD FACSAriaTM III Basic System (IC No. 53216) o Maximum optical sensitivity due to: - Gel-coupled cuvette optics. - Maximum light yield due to complete reflection optics with patented octagon detection blocks - Simplest handling due to advanced technology:  completely alignment-free optics on excitation and emission side  Easy Nozzle change with integrated O-rings without influence on optical alignment (each 1 Nozzle 70 μm, 85 μm, 100 μm included)  Exact fully automatic adjustment of the drop delay with live control by BD AccuDropTM  Automatic s ...

Newport Optical table Bravo, very good condition Find more here - / Contact us at -

Cleaning system, for ceramic flexo and ceramic flexo sleeves. Plastic media or sodium bicarbonate is sprayed at low pressure onto the the cylinder. This media is then recycled continuously about 8 times, depending granulometry. The machine consists of a cleaning and a cyclone/filtration filtration" section. Second-hand machine. Power supply: 230V 50/60Hz 3kW Compressed air: 5 bars Media consumption : 0.5kg/hour Find more here - / Contact us at -

2012 Horiba Fluorolog FL3 - 22 Modular spectral fluorometer, very good condition, barely used. Was last serviced in 2022, but is currently in storage Features: - FL3-22 inklusiv Fluoressence Software - FL1048-FUP Peltier cooling chamber - FL1001 Front Face Option - ZK36000120SL Fixed probe holder for front-face measurements with fine adjustment - FL1044 Automatic polarization unit - FL1011 Automatic quadruple cuvette holder - FL1014 Control unit for aut. cell changer - AC200- A25 Temperature control unit - Transmission and absorption unit - DM303 Amplifier - COM-FL Computer control system Find more here - / Contact us at -

Illumina MISeq, good condition New-generation sequencer / for DNA Find more here - / Contact us at -

10X Genomics GCG-SR-1 The Chromium Controller is in very good condition Find more here - / Contact us at -