bak tec used for sale

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis SCM TECH Z2-27-C wood boring machine was manufactured in 2010. It features a maximum workpiece height of 160 mm, length of 2700 mm, and width of 1300 mm. The machine includes a routing spindle and a horizontal boring unit, ensuring versatility in operations. If you are looking to get high-quality wood processing capabilities, consider the SCM TECH Z2-27-C machine we have for sale. Contact us for further details.

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Key data: 1350 mm, 3 st.

CALIBRATING SANDING machine with 3 belts model DMC TECHNOSAND 1350 RRP second-hand machine working conditions excellent machine with vacuum unit for table machine with CE regulation: YES instruction booklet : YES universal machine for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data: max. working width mm.1350 max. working height mm.150 min. working height mm.3 dimensions of abrasive belts mm.1380 x 2620 automatic centering composition machine ( 3 units , 3 independent motors ) : 1st unit : rubber roller diameter mm.170 - shore 45 . motor power Hp 15 automatic blowers for cleaning abrasive belts 2nd unit : rubber roller diameter mm.170 - shore 45 . motor power Hp 15 automatic blowers for cleaning abrasive belts 3rd unit : electronic segmented pad n.34 sectors . motor power Hp b ...

Inv. Num. : 9102 Type: Hi-TECH 230 BL YMC Producer: Hwacheon Created: 2019 Parameters: Control system: FANUC Hours: 6623 h Maximum turning length: 584 mm Maximum turning diameter: 400 mm Maximum turning diameter over bed: 750 mm Maximum spindle speed: 3500 1/min Weight: 6650 kg

Clamping force: 850kN, tie-bar spacing: 370mm/370mm, platen dimensions X/Y: 540mm/540mm, opening stroke: 450mm, machine dimensions X/Y/Z: approx. 4000mm/1300mm/2000mm, weight: approx. 4250kg. Some parts of the machine have been renewed in recent years. Documentation available. An on-site inspection is possible.

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt rolls ...

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Clipping machine Manufacturer: Technopack Tipper Tie Made of stainless steel and durable industrial plastic Easy to clean thanks to smooth surfaces Machine dimensions: Width: 100 cm Depth: 78 cm Height: 180 cm Power: 0.1 kW Voltage: 2.5 A Compressed air: 4–6 bar / 0.4–0.6 MPa

KOCH TECHNIC Feeder/Doser/Mixer Set 1 Pallet Type : TM 6D Year: 1995 Dimensions (L x W x H) : 1,20m x 0,90m x 0,50m Weight : 100 kg

This complete cable recycling plant has a capacity of 1000 kg/h and is designed for the granulation and separation of electric cables, recovering both copper and plastic materials. Complete Line Components - Pre-shredder: Tecnoecology TG 1250, 55 kW - Blade mill 600 mm: Tecnoecology, 37 kW - Zig-zag separation plant: Tecnoecology - Cell mill: Tecnoecology T25/45, 55 kW - Separation table: Tecnoecology TV 500 - Vibratory screen 600 mm for separation of ground plastic and fine copper - Separation table: Tecnoecology 300 for fine copper recovery - Dust filter: 72-sleeve type - Pneumatic transport fans - General electrical control panel Find more here - .ucymachines/ Contact us at - sales@ucymachines

consisting of: Rinser 15 Nozzles Vacuum filler 16 Filling valves Screw capper 3 heads 22 mm screw cap

Material: Stainless steel 1.4301 Drive: 5.5 KW Weight: 2050 kg Screening area per deck: 3.65 m² 2 x ball head cleaning 2 x sieve insert with mesh size of your choice: 0.1 - 5mm

Robot 4-osiowy: osie X, Y, Z, napędzane serwomotorami (elektryczne); oś C Przejazdy w osiach: X-440, Y-800, Z-1250 Waga: 185 kg Podstawa robota (adapter), klatka bezpieczeństwa

Manufacturers and Models: - Tima Tec - Varioroll Type 418 - PLEVA - RF110-AF120 - Erhardt + Leimer - CN 4007 - Menzel - S104413 Technical Data - Working width: 3,300 mm - Years of Manufacture: 1999 to 2005 Line Components - Unwinder - Dancer with sliding plate storage - Surface smoother - Microwave sensor - Metal detector - 4 coating chambers - Inspection stand - Winder Find more here - .ucymachines/ Contact us at - sales@ucymachines

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

TECHNICA ZSM 5100 center grinder for long shafts max L = 1000 Centering bore diameter 3 - 60 mm, workpiece clamping range 4 - 220 mm, workpiece length 50 - 1000 mm, workpiece weight max. 120 kg, centering bore angle 60°, grinding head adjustement max. 160 mm, grinding spindle speed 10000 - 45000 rpm, dressing stroke of the grinding disc dressing unit max. 40 mm Machine under power in our warehouse Mimu Machine Tools Gussago BS Italy

Cooking piece, cream cooker Floor-standing unit approx. 100 capacity Stainless steel version with agitator with boiler tilting device double-walled, with thermal oil/electric heater Heating 85°C

Key data: 3500 kN

Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...

Equipment: open design, standing on 3 feet, insulated, jacket can be heated and cooled, copper inner coating, stirring/cutting unit, various connections in the jacket for hot water/ice water, outlet connection nominal diameter DN 65 reduced to nominal diameter DN 25, capacity: 1200l, outer diameter: 1770mm, inner diameter: 1600mm, height with agitator: 1550mm, tank height: 1000mm. An on-site inspection is possible.

Key data: 800 kN

Engel Victory 500/80 Tech / Production line with the Engel Viper 12 robot Year of Make: 2011 Injection unit: Screw diameter: 45 mm Injection weight: approx. 295 g Spray pressure: 1598 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 3 Hardened injection unit - Bimetal Robot Angel Viper 12 Year of Make: 2014 5-axis robot: 4 axes are driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at an additional cost Dimensions: Weight: 5300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/motor: 15 kW All off ...

CHARMILLES TECHNOLOGIES ROBOFIL 510 with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional. Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A. Automatic wire tensioning, precise wire guidance, stable construction. Control console (Siemens), protective devices, emergency stop.

Key data: 1100 kN

Engel Victory 330/110 Tech / Production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of Make: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Spray pressure: 1670 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 k ...

Key data: 2600 kN

Engel Victory 2460/260 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2021 Injection unit: Screw diameter: 70 mm Injection weight: approx. 1100 g Spray pressure: 2000 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in perfect technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 10,000 in automatic mode Air Valve x 5 Hydraulic core pull x 2 on the side of the movable clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Injection unit is wear-resistant and resistant to corrosio ...

Key data: 2600 kN

Engel Victory 1350/260 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 590 g Spray pressure: 2183 bar Dosing volume: 618 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 8 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Ser ...

Key data: 3000 kN

Engel Victory 1560/300 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 6,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 60 mm Injection weight: approx. 690 g Spray pressure: 2200 bar Dosing volume: 763 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Operating hours: approx. 6,000 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Air Valve x 3 Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 9 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Serv ...

Key data: 3000 kN

Engel Victory 1350/300 Tech Ecodrive with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2012 Injection unit: Screw diameter: 60 mm Injection weight: approx. 670 g Spray pressure: 1835 bar Dosing volume: 735 ccm Clamping unit: Clamping force: 300 t Spar spacing: 0x0 mm Size of the clamping plates: 1200x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Sepro Industrial Robot SDR 22S robot Machine in very good technical condition Operating hours: approx. 18,000 h in automatic mode Tie-bar-less, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inve ...

General SKUR1336 LocationBarneveld CEcheck MakeRudert Edelstahl Technik GmbH (D) TypeReaktor 10m3 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity10000 ltr. Vessel sizesdia. 2400x3500mm Dished bottomcheck Dished top sidecheck Manholedia 600 Top connectionsDN100 (3x), DN150 (2x) DN250 (1x) OutletDN150 Half coil jacketedcheck Max. temperature170 degr. C With paddle stirrercheck Motor37 kW 230/400 Volt Speed mixing shaft80 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General No.P033321 Year of construction2004 Mounted on legscheck Floorspace2,8x2,7 M Total height5,9 M Weight6000 KgPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalR ...

General SKU231U194 MakeTecno Vibracione Venazeti TypeVVC70A 16/14 No.3117/3357/00 Year of construction2000 LocationBarneveld Main Features MaterialStainless steel Surface0.76 m2 Sizes diameter700 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,76 m² Number of sieve decks:2 Sieve sizesDia: 695 mm InletDia: 275 mm OutletDia: 110 mm (3x) Drive excentercheck Motor1,12 kW,380 Volt Sieve perforation5 mm and 3 mm MaterialStainless steel 1.4301 (304) General Mounted on mild steel framecheck With switchcheck Floor space0,9x0,9m Total height1,05m Weight210kg CEcheckConsumer wastePowdered foodsGeneric medicinesStarchOther chemicalRubberPlastic & polymersVibro sievesFeed additivesOrganicsPaper & otherOther pharmaceuticsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicTecno Vibracione VenazetiIndustries > ...

General SKU304W587 MakeTechnoglass TypeAE160 No.8289 Year of construction1999 Mounted on legscheck Pressure Working pressure6 Bar Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume160 Ltr. Motor1.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity216 l, (160 l) Vessel sizesDia. 800x600 mm ManholeDN 700 Top connectionscheck Outlet(top discharge by vacuum/ pressure) With jacketcheck Max. temperature200°C With propellor stirrercheck Motor1,5 kW, (400 V, 1460 rpm (Ex)) Speed mixing shaft36 - 178 rpm With jacketcheck Glass Reactors MaterialGlass General LocationBarneveld Floorspace0,80 x 0,80 m Total height2,60 m Weight650 kg ATEX designedcheck Extra Specifications- No bottom outlet for product. Product has to be discharged by vacuum or pressure- baffle with temperature probe installed Technical sp ...

General SKU360S873 LocationBarneveld MakeTrennso Technik (D) TypeSIK 500-1200-2-O No.0600117 Main Features MaterialMild steel Surface0.5 m2 Size length1200 mm Sizes width440 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m2 Number of sieve decks:2 Sieve sizes440x1200mm Inlet190x190mm Outletdia 200mm (2x), dia. 250mm (1x) Drive excentercheck Motor0,75 kW 220-240/380-420 volt Sieve perforationdia. 10mm, 1x1mm With ball cleaningcheck MaterialMild steel With jacketcheck General Year of construction2011 Mounted on mild steel framecheck With switchcheck Floor space2,1x1,3 M Total height2,3 M Weight950 KgConsumer wastePowdered foodsGeneric medicinesStarchOther chemicalRubberPlastic & polymersVibro sievesFeed additivesOrganicsPaper & otherOther pharmaceuticsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & ...

General SKUR0915 MakeTechnoglass (vessel) / Tycon (top part) (Ita) LocationBarneveld Type5445 ltr Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume7260 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7260 ltr Vessel sizesdia. 1800x3190mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm Top connectionsDN150 (5x) DN250 (2x) Outletdia. 100mm With jacket710 ltr Max. temperature-30/200 Degr.C With paddle stirrercheck Motor15 kW 380 Volt (Ex) With jacketcheck Glass Reactors MaterialGlass - Enamel General No.5745 / 2705 Year of constructionvessel part 1996/ top part 1985 Floorspace2,3x2,3 M Total height5,9 M Weight9000 Kg ATEX designedcheck Extra SpecificationsClamped topGeneric medicinesOintmentsFine chemicalsOther chemicalBi ...

General SKUR1191 MakeTechnoglass Spa (IT) LocationBarneveld Type6300 L Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume7590 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7590 Ltr (nett.6300 Ltr) Vessel sizesdia.2000mm x3050mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connections2x DN250, 5x DN150 OutletDN150 With jacket(700 Ltr) (16,6 m2) Max. temperature-30/200 Degr.C. With paddle stirrerHastelloy C4/C22 Motor15 kW, 400 Volt (Ex) Speed mixing shaft6.9-69rpm With jacketcheck Glass Reactors MaterialGlass - Enamel General No.5785 Year of construction1996 Floorspace2,5x2,5 M Total height5,0 M Weight8500 Kg ATEX designedcheckGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & ...

General SKUR1177 MakeTechnoglass S.P.A. (IT) LocationBarneveld Type1825 ltr. Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume1825 Ltr. Motor1.1 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity1825 Ltr (1600 Ltr) Vessel sizesdia.1000mm x2272mm Dished bottomcheck Dished top sidecheck Top connections2x DN200, 2x DN100, 2x DN80 OutletDN80 With jacket(130 Ltr.) Max. temperature-10/200 degr.C. With propellor stirrercheck Motor1,1 kW, 380 Volt (EX) Speed mixing shaft177 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel General No.4622 Year of construction1990 Floorspace1,5x1,5 M Total height3,7 M Weight1300 KG ATEX designedcheckGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersSolventsGlass-lined ReactorsDetergent & s ...

General SKUR0900 MakeTechnoglass spa (Ita) TypeAE 6300 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7250 ltr (6300 ltr Nett) Vessel sizesDia 1800x 3100mm Dished bottomcheck Dished top sidecheck ManholeDia 500mm Top connectionsDN150 (4x), 250 (2x) OutletDN100 With jacket(710 ltr) Max. temperature-30/200 degr.C With paddle stirrerHastelloy C22 Motor15 kW, 400V (Ex) Speed mixing shaft20-80 rpm With jacketcheck Glass Reactors MaterialGlass General No.5744 Year of construction1996 Floorspace2.3x 2.3 M Total height5.8 M Weight8500 kg ATEX designedcheck Extra SpecificationsBottom part make Technoglass (1996)Cover part make Tycon (1985)&:nbsp:Generic medicinesOi ...

General SKUR0905 MakeTechnoglass spa (top part) / Tycon (vessel part ) (IT) TypeAE 6300 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity6300 ltr (Nett.) Vessel sizesdia. 2000x3060mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm (man hole cover missing) Top connectionsDN250 (2x), DN150 (5x) OutletDN150 With jacket(685 ltr.) Max. temperature-25/250 Degr.C With anchor stirrercheck Motor15 kW 380 Volt (Ex) With jacketcheck Glass Reactors MaterialGlass General No.4512 Year of construction1990 Floorspace2,4x2,4 M Total height5,1 M Weight9000 Kg ATEX designedcheckGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersSolventsGlass-lined Re ...

A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible.

General SKU071E295 MakeTechnoglass Italy No.2803 Year of construction1984 LocationBarneveld Material Lining materialGlass - Enamel Pressure Working pressure20 Bar Vacuum possiblecheck Working pressure jacket7 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume2500 Ltr. Specified Features - Glass-lined Reactor Reactorcheck Capacity3355 l. (3000 l.) Vessel sizesDia. 1600x1300 mm Dished bottomcheck Dished top sidecheck ManholeDia. 350x450 mm Top connections(6x) Outletdia. 100mm With jacket(350 l.) Max. temperature-25/+200 °C. With dissolver stirrerimpeller style Without motorand gearbox With jacketcheck General Floorspace2,0x2,0 m Total height4,0 m Weight6000 kgGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersSolventsDiscountGlass-lined ReactorsDetergent & surf.Other pharmaceuticsCosmeticsLub ...

Table milling machine - swivel spindle milling machine Manufacturer: Holzkraft Model: Tecnomax T50 Year of Make: 2007 Spindle swivel Feed unit Manufacturer: Maggi Model: Steff 2034

Belt sander manufactured in 2008. This TECNOLEGNO COMPACT 52 is a 5-aggregate sander designed for sanding edges and profiles. If you are looking to get high-quality sanding capabilities, consider the TECNOLEGNO COMPACT 52 machine we have for sale. Contact us for further details.

This 7-axis Quick-Tech I-42U was manufactured in 2015. It features a maximum bar diameter of 42 mm and a maximum machining length of 250 mm. The machine is equipped with a powerful spindle speed of 6000 rpm and includes an automatic bar feeder. If you are looking to get high-quality turning capabilities, consider the Quick-Tech I-42U swiss type turning machine we have for sale. Contact us for further details.

Techmatik Splitting Machine for Concrete Products Techmatik Splitting machine for concrete products

Key data: 1400 kN, 139 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot, Machine comes from cleanroom production Manufacturer: ENGEL Type: VICTORY 330/140 TECH Year of Make: 2011 Clamping force: 140 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 154 ccm³ Moulded part weight 139 g/hp Control: CC200 Equipment: -Robot, manufacturer: Engel, type: V12 -2 x Core Pull -Blow-out valve -16 hot runner control zones -Protective fence -Conveyor belt

Machine still visible in operation at user’s premises.

diameter range 26 mm drawing speed 10 m/min diameter range - mild steel 26 mm diameter range - high tensile 24 mm capstan diameter 1300 mm

A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment.

TECNOVA RECYCLING EXTRUDER, mod.Mini 60 mm., for PE PP scraps, throughput rate around 127 kg/h, buffer silo, forced feeding unit, extruder with 60 mm screrw diam., 35,3 kw drive, semi-automatin changer, water ring pelletizer, drying centrifuge, electric cabinet for whole management., installed power - used power in work: about 60-65% : 35,3 kw, capacity: 127 kg/h depending on materials, conditions: used, in good conditions

General SKU201P093 LocationBarneveld MakeSGL Technik Gmbh Meitingen (DE) TypeRS-77-2-5515.1 No.76461/1A Material Tube materialGraphite Diabon-NS1 G20-3-170 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface8 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface8 m² Tube capacity62 l. Number of tubes:55 Tube diameter37 mm Tube length1500 mm Wall thickness tubes5 mm Max. temperature170°C Shell capacity100 l Shell diameter460 mm Shell length1380 mm Wall thickness shell6 mm Max. temperature170°C Shell connections(2x) DN80, DN40 Cover connections(2x) DN150 MaterialMild steel General Year of construction1998 Floorspace0,7 x 0,7 m Total height2.2 m Weight600 kgOils & fatConsumer wastePaints & coatings ...

2 x Injection moulding machines Engel VC 2460/180 tech BJ 2023

TECNOVA RECYCLING EXTRUDER, mod.Mini 60 mm., for PE PP scraps, throughput rate around 127 kg/h, buffer silo, forced feeding unit, extruder with 60 mm screrw diam., 35,3 kw drive, semi-automatin changer, water ring pelletizer, drying centrifuge, electric cabinet for whole management., Machine offered reconditioned, installed power - used power in work: about 60-65% : 35,3 kw, capacity: 127 kg/h depending on materials, conditions: used,reconditioned, type: single screw PE PP ABS PS PC recycling