bak tec used for sale

General SKU254S205 LocationBarneveld CEcheck MakeSGL Carbon Technics (FR) Pressure Working pressure10 Bar Main Features MaterialDiabon Volume30000 Ltr. Motor7.5 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity30 m3/h With motor7,5 kW 400/690 Volt InletDN65 OutletDN40 Centrifugal Pumps MaterialGraphite Diabon General TypeFRWP NG 65-40-200 Mach.No.901466 Year of construction2012 Floorspace1,4x0,6 M Total height0,9 M Weight320 KgOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicSGL TechnikIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine chemicalsIndustries > Chemi ...

This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine.

Key data: 42 mm

Equipped with Iemca Boss 545 barfeed and Mitsubishi M700 Control, the lathe has always worked with oil, in regular working order (just replaced bearings and ball screws of the X1/Z1 axes and 2 drives)

General SKU317S551 LocationBarneveld CEcheck MakeGWK Pressure Working pressure3.8 Bar Main Features Capacity9 KW Temp.95 °C Specified Features - Temperature control unit Water heatercheck Electric heatingcheck Heating medium:water Electric capacity9 kW Capacitymax. 60 ltr/min Temperature95 degr. C General TypeTeco CS 90 Year of constructionunknown Mounted on wheelscheck With switchcheck Floorspace0,8x0,3 M Total height0,6 M Weight50 KgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsTemperature control unitsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeve ...

TECO Office 600 All FUll time surge protection

workpiece diameter: - mm grinding depth: - mm clamping length: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3738 Witte Bohrtechnik VSB500-200 year/Baujahr 1991 Trailer-mounted well drilling rig, Hatz engine, 2 hydraulic pumps, direct rotary head, with flushing pump (auxiliary pump) – with Hatz engine, previously drilled to a depth of 60 m – 160/170 mm Trailer well drill, Hatz engine, 2 hydr. Pumps, direct rotary head, with mud pump (auxiliary pump) - with Hatz motor, drilled with it so far: 60 m depth - 160/170 mm

Reference ID PP-57040 Category Guillotines Manufacturer Wohlenberg Model cut-tec 115 Year Built 2003 Color - Impression - Working Hours - Speed - - Max. size 115 cm Min. Size - Condition Good Location Europe Availability Immediately

The ROTOTEMP 1,5 is a scraped surface heat exchanger for cooling or heating various products, with a heat exchange surface of 1,5 m2. The heat exchanger consists of a jacketed outside cylinder and a jacketed internal cylinder. The outside jacket is insulated and finished with stainless steel sheeting. The product space is located between the two cylinders. A rotating cage with scrapers is fitted in the product space. The scrapers ensure proper mixing during the tempering process. Because the cylinders are scraped continuously, it is possible to cool crystallizing products without a product layer building on the walls. It is also possible to heat products without the danger of sticking to the walls. Thanks to these characteristics and the design of the installation, it is also possible to accurately perform heat exchange processes for products with high viscosity., Technical specification ...

Flour silo ALU2 pieces made of ALUMINUMProduct descriptionManufacturer: AT HefeleIdeal for cellars height 200cmEach piece 4 clay pieces Silo per mass Diameter : 240cm Height : 190cmDetails see pictures.

FOR SALE steam turbine year 1997

4 Ink Pumps Complete Technotrans TB 200-15/9 Ink Pump Year 2007 Capacity 200kg bins Air Pressure: 8bar

MANUFACTURER GMP WIDTH (MM) 1550 HIGHT (MM) 1210 WATT 100 AMPERE 0.4 MORE INFORMATION LAMINATING SIZE: 1120MM TYPE EXCELAM-Q1120COLD/RS DEPTH (MM) 610 VOLT 230

GMP PROTOPIC 520 MAX SHEET SIZE 520 X 720 MM MAX SPEED 15 M / MIN AUTOMATIC SHEET SEPARTOR MANULA FEEDER OIL TEMPERATURE CONTROLLED LAMINATING ROLLER COMPRESSOR

tube diameter: 6 - 42 mm wall strength: 3 mm bending radius min.: 180 mm bending radius max.: 5 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Equipment: Saw unit Notching unit Deburring unit for internal and external edges Flaring unit / flaring function (necking / expanding) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Tecno Box cartoner type TX-1. The machine folds and glues 60×40,30×50 cartons with head switches to other dimensions. CE

Descaling pump, universal suction, pressure and circulation pump -Device: for problem-free descaling -of smaller water systems such as heating coils, gas flow and Circulating heaters, water boilers, etc. -Drive: 220 volts -Max. Delivery rate: 6 l/min -Max. Delivery head: 40 m -Dimensions: 420/420/H410 mm -Weight: 9 kg

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco wd 100.09.15 -Heating output: 9 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the nameplate -Number: 3x temperature control unit available -Price: per piece -Dimensions: 1190/320/H745 mm -Weight: 85 kg/pc.

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

Oil hand pump, oil cabinet, oil dispenser, oil pump, oil dispensing system, oil delivery device, oil station, oil centrifuge -Handover: in its current condition as inspected -Level indicator: missing, condition as shown in photos -Manufacturer: Tecalemit, mobile oil dispensing device with hand pump -Item No.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand-operated -Hose: can be shut off with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco 1000 -Heating output: 15 kW -Nominal cooling capacity: 100 kW Technical data: see photo of the nameplate -Dimensions: 1190/320/H750 mm -Weight: 99 kg

Fuel gauge, oil conveyor, oil dispensing system, oil station, fuel pump, tank data acquisition, tank system display, DSS microcomputer -Manufacturer: Tecalemit, DSS data interface -Art.No.: 2.78 11 10.1 -Smallest measuring quantity: 0.5 liters -Volume flow: 1 to 10 l/min -DSS Microcomputer: 1.575001.1 -Dimensions: 370/280/H180 mm -Weight: 8.2 kg

Desk, height adjustable desk -Manufacturer: Palmberg, height-adjustable desk -Tool-free: height adjustable by means of removable adjusting elements -Width: 2000mm -Depth: 800 mm -Height: 680-760mm -Number: 6x desk available -Price per piece -Dimensions: W/D/H 2000/800/H720 mm -Weight: 43 kg/piece

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Manufacturer: Teco, clamping tool clamping bracket, various designs -End terminal: Type 30501 / 30502 / 30503 2 pieces each -Step block: Type 40102 / 40103 / 40104 4 pieces each -Clamping bolt: thread M10, see photos 24 pieces -Price/Delivery: complete -Dimensions: 390/190/H210 mm -Total weight: 6.5 kg

Dosing rotary valve, rotary valve, dosing valve, rotary valve for conveyor screw, transport screw, screw conveyor, conveyor technology, pipe conveyor screw -Manufacturer: Tecom Modena, rotary valve 8 blades type PST 28 D with drive -Speed: 37 rpm -Drive motor: 1.50 kW -Inlet opening: 350 x 250 mm -Outlet: Ø 90 mm / Ø 76 mm -Dimensions total: 970/690/H425 mm -Weight: 146 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 2 pieces -Type: PTPk-6/5 / MK6/5 -Shipping/Price: complete -Transport dimensions: 127/64/H148 mm -Weight: 4.0 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5 2 pieces -Type: MK5/4 -Shipping/Price: complete -Transport dimensions: 345/100/H50 mm -Weight: 7 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, extension sleeve -Morse taper sleeve: Morse taper extension MK2 2 pieces -Type: MK2/2 -Total length: 400 / 475 mm -Shipping/Price: complete -Transport dimensions: 475/44/H22 mm -Weight: 2 kg

Fuel gauge, oil pump, oil dispensing system, oil station, fuel pump, tank data recording, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Volume flow: 1 to 10 l/min -Engine: Hanning 0.55 kW -Pressure vessel: volume 2.8 liters -Individual components: see photos -Number: 2x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/piece

CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Automata, Control Rack -Type: Rack VME 9 SLDT 7U/R -Printed circuit boards: Tecnint TVM 743 Tecnint TVM 200 CA1-94-V1 -DC/DC Converter: cdi -PowerSupply: Automata VME 150W -Individual components: see photos -Price/Sale: complete -Dimensions: 300/280/H310 mm -Weight: 9.9 kg

Manufacturer: Technolegno, Year: 1989, Program: SPS, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Sanding hight mm: 40/60, Schleifaggregate links : 3 + 1+ 2, Surface sanding units: 4, Profile sanding units: 1, Sanding unit discs: Kopierschleifaggragt, Monting of the machine: 4 Langband 1 Bürste 1 Kopierschleiffen, Unit 1 tiltable: yes, Unit 1 Kw: 0,75, Unit 2 slewable: yes, Unit 2 Kw: 0,75, Unit 3 slewable: yes, Unit 3 Kw: 0,75, Unit 4 slewable: yes, Unit 4 Kw: 0,75, Unit 5 slewable: no, Number of frequency controlt belts: über Getrieb, Sanding belt speeds m/min: 3-18 m/sec, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 1, Wight approx. kg: 4000, FREE TEXT: Vorsch von 3-18 Meter, Year :1989

Pharma Technology PTGV 1200 CE N ECE capsule deduster/polisher with Ceia THS/PH21N metal detector, empty capsule eliminator to remove any empty, broken or opened capsules and venturi vacuum transport, suitable for capsule sizes 000 / 00E / 00 / 0E / 0 / 1 / 2 / 3 / 4 / 5, capacity from 220.000 capsules/h (size 00) up to 500.000 capsules/h (size 4), height product inlet 864 +/- 10 mm, height product outlet 1023 +/- 20 mm, machine floor space approx. 1289 x 615 mm (W+D), machine height approx. 1788 mm, electrics 230 V AC – 50/60 Hz

General SKU440W1452 MakeAgilent Technologies LocationBarneveld CEcheck Type1100 series Specified Features - Isolator Capacity100x 2 ml vials in 1 tray, 40x 2 ml vials in 1/2 tray, 15x6 ml General No.DE43628255 Year of construction2005 Floor space1,00x0,60 m Total height0,80 m Weight100 kg Extra SpecificationsHPLC with autosampler.UV-visible detectors, pumping system, fluorescence detector, LC/MSD unit, refractive index detector, GPC/SEC system, Micro plate sampler, 220, Chem station&:nbsp:all product nr:s:G1314AG1312AG1379AG1316AG1367AG1330BOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsIsolatorsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfe ...

BERTHOLD TECHNOLOGIES MITHRAS LB 940 Multimode Microplate Reader Plate reader for luminescence and fluorescence Number: 38099-33 Untested Equipment Without a computer Without software

Inv. Num. : 9058 Type: SPV 40 CNC Producer: CZ. TECH Created: 2008 Parameters: Control system: SIEMENS Table diameter: 533 mm Feed length X-axis: 550 mm Feed length Z-axis: 850 mm Max. turning diameter: 850 mm Max. workpiece height: 800 mm Max. workpiece weight: 800 kg Weight: 12500 kg

Capacity for the LTM120 is 4600 to 4800 pieces / hour. PIC: SABRINA (0177418071) F30

Auto Glove Sampling Machine NX Series PLC Factory : F40

Silo system with 4 containers HB-TECHNIK - Capacity of a total of 16 tons of flour - 4 aluminium silos - Incl. scale and dosing unit - Condition: Good, ready to use - already dismantled - Transport costs and assembly on request

Description Technotrans TBP 300-36-12 paint pumps with signalling panel 4 x 300 kg from 2010 Ratio 16:1 Compressed air 7.5 bar required

Aircooled chiller/Heat pump MTA TAEevo TECH 802 159 kW/184 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 184 kW / 52.32 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP182KQE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM112B14S2/355-E, expansion vessel. Dimensions: 3.54x1.25x2.2 m. Weight: 2500 kg. Working hours: 8650/7460 h. Condition: Good

Description Label Printer Toshiba B-472-QP TEC Identical label printer Stielow 3565 with rewinder – Serial interface, 25 pin – Technology: Thermal Transfer – Resolution: approx. 200 DPI – Print width: max. 104 mm – Print speed: up to 250 mm/ second Thermal transfer ribbons for thermal transfer printers, 80 mm x 600 m, 1", wax-resin quality, flush on the outside, rolled up on a 1 inch cardboard tube. The ribbons have an outwardly wound wax coating / color side and are suitable for near-edge print heads.

Description This sensational, versatile tool with a diameter of 35 mm solves your cutting and micro-perforation problems in one fell swoop. Only one tool for micro-perforation, cut-off, cut-out, edge trimming and scribing.

Description Techno-Grafica Diamand TPP 1550 HS Printing Plate Developing Machine with Two Brush Rollers for Kodak Trillian SP from 2016 with Various Replacement Brushes and Rollers