bag packaging machine used for sale

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 40 mm / height 108 mm -Dovetail: 79 to 59 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 140/73/H155 mm -Weight: 3.6 kg

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

Veneer joining machine with pneumatic voltage Cutting length 3m L x W x H: 3.5 x 1.2 x 1.7 m Year of construction 1996 Weight approx. 550 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 130 x 30 mm -Clamping depth: 125 mm -Dimensions: 405/130/H105 mm -Weight: 18.7 kg

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 200 x 55 mm -Clamping depth: 285 mm -Dimensions: 650/200/H145 mm -Weight: 65.8 kg

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 200 x 60 mm -Clamping depth: 240 mm -Dimensions: 545/200/H145 mm -Weight: 53.9 kg

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 160 x 50 mm -Clamping depth: 185 mm -Dimensions: 500/160/H120 mm -Weight: 32.5 kg

Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Lincoln Electric, TIG welding machine, inverter welding machine type Invertec V260-S -Welding power: max. 260 A -Dimensions: 475/200/H345 mm -Weight: 16.5 kg

Strapping machine, packaging machine -Through hole: 500 x 500 mm -Strapping band: 5 mm -Core diameter: 60 mm -Coil width: 120 mm -Pressing the pedal triggers the automatic strapping.

Max Size 520 x 850 mm Min size 100 x 120 mm 4 Buckles Noise hoods High speed feeder head Digital counter with program 1 Electronic knife Hook on shingle belt delivery Implant machine Very good conditions

Number of milling spindles: 2 St. fence: 1 ja workpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Foto von Kürzlich gelieferten  ...

grinding diameter: 350 mm grinding length: mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Basis: Kellenberger Kel-Varia UR175-1000 Schleifkopf UR mit T1-T2-T3 Grundausstattung: -T1 500mm Schleifscheibendurchmesser -T2 400mm Schleifscheibendurchmesser -B-Achse hochauflösend -Marposs Messeinrichtung zur Werkzeugvermessung -Werkzeugvermessung -Aktive Längspositionierung -GAP an T1 berührungslos -Reitstock mit Handrückzug -Werkstückspindelstock MK5 mit Kurzkegelaufmahme DIN 55026 -Innenschleifeinrichtung riemengetrieben Optionen gegen Aufpreis: - neuer Werkstückspinde ...

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø : ±8 ° longitudinal feed of the table: 700 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 5,48 x 2,0 m Foto von bereits gelieferten Maschine (600mm Spitzenweite) mit gegebenenfalls anderen Optionen. Geometrisch überholt und neu lackiert. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Dre ...

grinding diameter: 250,350,450 mm grinding length: 1500 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ± 6 ° longitudinal feed of the table: 1750 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 80 mm total power requirement: 6,5 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 5,6 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrisch überholt und ne ...

We sell a pietroberto fork kneader. The machine is ideal for flatbread doughs. Used and overhauled / Warranty

Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 90 x 30 mm -Clamping depth: 65 mm -Dimensions: 320/230/H95 mm -Weight: 12.6 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm

Reference Num.: 3384 Brand: Herzog Heymann Type: M3 + S18 Construction year: 1969 Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Flachstapelanleger - Schuppenauslage - Falzwerk Typ S18 mit 4 Taschen

Reference Num.: 3527 Brand: MBO Type: T 500 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - Format 50 x 70 cm

max. wheel diameter: 3000 mm gear width: 1200 mm max. module: 30/40 min. module: 2 table diameter: 2500 mm table load capacity: 400 kN hob dia. - max.: 450 x 500 mm milling spindle speeds: 10 - 165 U/min hob length max.: 500 mm tip circle diameter: 2050 mm tooth helical angle min/max: 0 - 45 ° center distance betw. workpiece-tool min/max.: 150 - 1750 mm milling slide swivelling: 50 Grad distance table / counter stay: 1050 - 2050 mm shifting: 300 mm workpiece weight: 40 t table bore diameter: 800 mm depth of hole: 1100 mm main drive motor: 37 kW min. workpiece diameter: 290 mm min. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1800 mm/min radial feed: 1 - 500 mm/min feed: Tangential 1 - 450 mm/min rapid traverse: 1875 / 530 / 470 mm/min electrics - voltage/frequency: 380 / 50 V/Hz control: Siemens Sinumerik 3M total power requirement: ...

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Machine vice, sturdy vice, drill press vice -Machine vice: CEKABA-BON clamping jaws 125 x 40 mm -Clamping depth: 130 mm -Dimensions: 440/210/H90 mm -Weight: 14.4 kg

Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

x-travel: 500 mm y-travel: 500 mm z-travel: 350 mm table surface area: 800 x 450 mm spindle taper: ISO: 40 quill stroke: mm feed - longitudinal/cross: mm/min feeds vertical: mm/min turning speed range: max. 3150 U/min voltage: 380 V / 50 Hz power capacity: 4 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 5-10 mm stroke: 40 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 station rotary table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 99999 mm grinding length: 99999 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m We offer the overhauling of your Kellenberger U-machine. Mail serial number and foto of the machine and you will get an offer. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Parallel joint system for thread cutting machine, telescopic arm drill holder, drill, rotary drill, magnetic drill, impact drill -Parallel joint system: for thread cutting machines, drill press holders or similar uses -Hole: Ø 36 mm -Dimensions: 535/80/H770 mm -Weight: 21.9 kg

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: CEA, rocker arm spot welding machine type ZP 28 -Rated power: 25 kVA -Arm length: 550 mm, adjustable length -Operation: via foot pedal -Dimensions: 1050/330/H1270 mm -Weight: 152 kg

Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: RSA, Deburring machine type Deburrer DUO -Drive: 2.4/3.7 kW / 1500/3000 rpm -Brush: Ø 255 mm -Brush width: -Dimensions: 440/945/H1185 mm -Weight: 277 kg

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Geometrically overhauled with ...

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m Overhauled with geometric KELLENBERGER protocoll -2-axis DRO -Paper filtration Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erford ...

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg

MIG/MAG welding machine -Max. welding power: 400 A -Four-roller feed -Water-cooled -Hose package -with removable wire feeder -incl. ground cable -Gas valve

grinding diameter: 250 mm grinding length: 1000 mm centre height: 125 mm grinding wheel diameter: 500 mm grinding wheel width: 80 (100) mm bore: 203,2 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm workpiece spindle swivable +/-: 360 ° grinding head swivellable +/-: 0 ° grinding spindle speed: U/min : 0-9,99 mm/Ø : 0-9,99 mm/Ø table swivelabel +/-: 10 ° longitudinal feed of the table: mm table speeds: 0,02-6 m/min : 130 kg max. workpiece weight -without tailstock: 130 inkl. Spannung kg cross travel: 270 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 5,5-7,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the serv ...

honing diameter: 125 mm stroke: 350 mm throat: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two step expansion for pre and finish honing Air gauge measuring Fixture for honing a 4 cylinder block Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 250,350,450 mm grinding length: 600 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Geometrisch überholt und neu la ...

Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B13 -Table size: 300 x 1100 mm -Protrusion: 150/180 mm -Spindle stroke: 50/70 mm -Weight: approx. 200 kg

x-travel: 600 mm y-travel: 350 mm z-travel: 140 mm table surface area: 700 x 300 mm spindle taper ISO: 40 spindle turning speed range: 100 - 4000 U/min distance spindle center to column: 395 mm distance spindle nose and table: min. 170 -max. 550 mm control: TNC 407 milling feeds: 3 + 2000 mm/min rapid traverse: 5000 mm/min spindle drive: 5,5 kW total power requirement: 9 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,5 x 1,8 x 2,2 m • control HEIDENHAIN TNC 407, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm threading length: 20 mm turning speeds: 400 U/min working area: 500 - 1600 mm weight of the machine ca.: 25 Kg dimensions of the machine ca.: m • pneumatical thread cutting device, M3 - M12, • with 6 adapters of thread cuttings, Size 1, • control valve with lubrication, • order no. 31681, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tapping machine, bench drilling machine -Spindle mount: B12 -Tap chuck: Tapmatic 30 X M1.5-M7 -Projection: 165 mm -Motor power: 0.25 kW -Weight: 60 kg

Machine vice, vise -Jaw width: 310 mm -Jaw height: 180 mm -Clamping depth: max. 495 mm -Weight: 150 kg

Machine light EBLFE 136, housing made of galvanized sheet steel, glass diffuser, Fresnel diffuser -Connection rating: 24 volts -without a switch -Number: 2 lights available -Price: per piece -Weight: 5 kg