134,874 used machines on RESALE, but how to find them? Machine Search
grinding length: 1000 mm centre height: 175 mm b-axis: 1 ° max. dia. of grinding wheel: 500 mm internal grinding spindles: 60000 U/Min c-axis: 0.001 ° weight of the machine ca.: 5.7 t dimensions of the machine ca.: 4.25 x 2.2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working length: 1000-1600 mm working width: 40-150 mm Thickness: 10-80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring spindles: 6 St. Working width: 20-230 mm Working height: 8-160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area: 500x300 mm work height max.: 100 mm Weight: 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Feed motor: 5,5 kW total power requirement: 58,3 kw weight of the machine ca.: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 180 mm Feed motor: 3 kW weight of the machine ca.: 2750 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement.
Injection moulding machine Arburg 820S 4000-4600 BJ 2016
Heckert ZFWVG 250 x 2000 Thread Milling and Spline Hobbing Machine. Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 2000 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Dimensions 3700x2400x1600 mm Total weight 5200 kg Accessories; -heavy duty head -standard head -steady rest -flange -change gears full set
Inv. Num. : 8965 Type: FSQ 80 NC Producer: TOS Created: 1989 Parameters: Control system: HEIDENHAIN NS 700 Work table length: 3000 mm Work table width: 800 mm Maximum vertical spindle speed: 2500 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Travel Z axis: 1000 mm Machine height: 3500 mm Machine length: 5660 mm Machine width: 4400 mm Machine weight: 18000 kg
Inv. Num. : 8966 Type: Optimat KAL 210/A3/S Producer: HOMAG Created: 2008 Parameters: Control System: Power Control PC 22 Binding height: 950 mm Edge thickness: 0.3-3 mm Part thickness: 12-40mm Feed speed: 18-25 m/min Minimum. Material width: 60 mm Machine dimensions: 8300 × 1300 × 1800 mm
Inv. Num. : 8749 Type: M2-3120B Producer: FLOW Created: 2011 Parameters: Table dimensions: 2000x3100 mm Spindle power: 6.6 kW
Key data: 12000 , 155
SANDRETTO MEGA T 1200
bore capacity in steel (diameter): 32 mm Short spindle: MK 3 bore depth: 175 mm spindle throat: 320 mm column diameter: 130 mm distance spindle /table: 140-790 mm feed: 0,1 - 0,16 - 0,25 m/min number of spindle speeds: 60-1600 weight of the machine ca.: 450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: - mm grinding length: - mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
internal diameter: 5-200 mm grinding depth: 250 mm spindle stock travel: 180 mm spindle bore: 50 mm turning speed range - spindle: 120-1000 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2.4 x 1.25 x 1.75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FANUC Power Mate hydraulic: . grinding length: 800 mm grinding width: 400 mm distance spindle center to table: 650 mm table speed -stepless-: 30 m/min grinding wheel size: 350 x 50 x 127 mm weight of the machine ca.: 3.5 t dimensions of the machine ca.: 3.3 x 2.3 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
engraving field: 120 x 120 mm table-size: 250 x 250 mm workpiece weight: max 50 kg Control: Fobagraf machine weight ab.: 1000 kg machine frame made of welded steel construction Cross slide, hard stone design, table top with steel stop iron Height-adjustable laser head Quality-switched ND: YAG laser head, lamp-pumped, 100 W Deflection unit mounted on the laser head (with standard lens) Z-axis with gearbox and servo drive Servo axis control with X-, Y-, and Z-axes Water-cooled Control: Fobagraf user software package Operating system: Windows 2000 operating hours: 17.388 h manual included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: / mm turning length: / mm workpiece length: / mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting range: M3-M10 in Steel M3-M16 in cast iron M3-M18 in light metal and brass Spindle speeds: 120-240-180-360-300-600 rpm incl. 1 piece of new tap chuck Everything works smoothly and well
Key data: 350 mm, 700 mm
DMG Mori NLX2500SY/700 Manufactured on 2013 and put into operation on 2014. ZAchse: 700mm, Y-axis 100mm, turning diameter approx. 350mm. Spindle passage 70mm. Operation hours 5353 hours only as new C Axis Y axis B axis 3 Powered Wkz Collets feeder extra included Measuring arm Fully equipped See pictures Immediately available
process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3- 105 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No ...
Grindable diameter from 2 - 40 mm. Smallest and largest point angle: 40 – 180 °. For right- and left-hand cutting tools, 1-12 cutting edges. For sharpening twist drills, step drills, taps. Accessories and an instruction manual are provided.
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 40 eVo linear With Siemens 840 D sl Operate path control Year of Make: 2016 Travel: X 400 Y 400 Z 375 Speed range: 20 – 20,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 60-fold tool changer with double gripper ( HSK 63 ) 3 D Probe Heidenhain Electronic handwheel IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Rotoclear Direct displacement measuring system Blowing air d.d. spindle center 3-Piece Height Adjustable Machine Shoes Operating Instructions
HECKERT ZFWVG 250 x 1250 Thread Milling and Spline Hobbing Machine Max. workpiece diameter 250 mm Workpiece diameter over bed 500 mm Center height over bed 260 mm Threading/hobbing length 1250 mm Min/Max. module 2/18 Workpiece spindle bore 102 mm Bore of the collets 100 mm Tailstock quill stroke 100 mm Speed 45 – 560 rpm Lead of leadscrew 1,2 '' links / left mm Workpiece turning speeds 0,0032-2,65 U/min Rolling feed 0,027-5,66 mm/WU Longitudinal hob feeds 0,3-198 mm/min Main drive 4 kW Feed motor 25 NM Coolant pump 0,09 kW Lubrication pump 0,37 kW Total power requirement 9,5 kW Weight of the machine ca. 3,40 t Accessories; -heavy duty head -standard head -steady rest -change gears set -centers and arbors -spindle spare -counter weight Will be re-paint in original brown colour.
used
B&A REF: 9269 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 4.9KW SCREW DRIVE: HYDRAULIC
Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories:, Total enclosure,, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E, Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces., Probe,, Automatic central lubrication,, Coolant system for dielectric fluid,, Automatic fire extinguishing system,, Mist extractor,, Machine lamp., Cutter outside diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outside diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, Tool weight: max. 20 kg, X axis travel: 500 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis rotation range: 360 °, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2280 mm, Weight a ...
GERNEP Labetta labeling system. Built in 2013 with 11 bottle positions, 3 self-adhesive label dispensers and 2 wet glue label dispensers. Output 6K bottles per hour. Servo plate (also for cans). Self-adhesive formats available: 200ml/ 330ml/500ml/750ml. Wet glue format available: 200 ml other formats can be retrofitted. Incl. treadmill and turntable. For more details, please contact us.
Manufacturer: SEAL Model: 80 Pro D Technical Specifications - Maximum processing width: 2,030 mm - Maximum speed: 6 m/min - Maximum material thickness: 38 mm - Maximum roller pressure: 2.5 N/mm - Maximum roller temperature: 140 degrees C - Roller heating: both sides (top and bottom) Machine Dimensions - Width: 2,667 mm - Height: 1,654 mm - Depth: 634 mm - Net weight: 780 kg Transport Dimensions - Width: 2,710 mm - Height: 1,690 mm - Depth: 900 mm - Transport weight: 840 kg Electrical Data - Power supply: 3N/PE 230 VAC +/- 10%, 50/60 Hz, 25A Key Features - Variable temperature, speed and pressure settings - Ergonomic touchscreen control panel on swivel arm (operable from front and rear) - Feed table with tension rollers and fold-down print guide for smooth and even media feed - Longitudinal cutting device for trimming finished products during processing - Foldable pull rollers ...
workpiece weight: - kg workpiece length: - mm diameter: - mm documentation: vorhanden dimensions of the machine ca.: 4,10 × 1,20 × 1,40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FCS SD-600 M injection moulding machine was built in 2009 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. The machine, distinguished by its high efficiency and reliability, is an excellent choice for the economic production of plastic parts. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system operating at a maximum force of 600 tonnes guarantees the high repeatability and quality of the parts produced. In order to fully automate the entire process, a robot works together with the machine. It collects the finished moulded parts from the workspace onto a conveyor belt at the end of the process. The FCS SD 600 M injection moulding machine weighs 24 tonnes. Technical specifications of the FCS SD-600 M injection moulding machine ...
FCS SD-600MSV injection moulding machine was built in 2015 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. The machine is designed for the economic production of plastic parts of various shapes, sizes and colours. These parts are produced by a reliable injection moulding method. It involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system operating at a maximum force of 600 tonnes guarantees high repeatability and quality of the parts produced. The offer also includes equipment, consisting of, among others, an APEX robot and a conveyor belt. The FCS SD 600 MSV injection moulding machine weighs 40 tonnes. Technical specifications of the FCS SD-600MSV injection moulding machine - control system: FCS-3000 - maximum clamping force: 600 t - mould clamping stroke: 900 mm - screw diameter: 95 mm - injection ...
FCS SD-600MSV injection moulding machine was built in 2016 in Taiwan by FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD. Technical specifications of the FCS SD-600MSV injection moulding machine - control system: FCS-3000 - maximum clamping force: 600 t - mould clamping stroke: 900 mm - screw diameter: 110 mm - injection volume: 4274 cm3 - maximum injection weight PS: 3890 g - maximum injection pressure: 1307 kgf/cm2 - injection rate: 899 cm3/s - injection speed: 95 mm/s - injection stroke: 450 mm - minimum mould dimensions: 560 x 560 mm - mould thickness: 300-1100 mm - mould mounting platen dimensions: 1290 x 1290 mm - distance between tie-bars: 860 x 860 mm - ejector stroke: 220 mm - ejector force: 11 t - robot: SHINI ST1 - conveyor belt - cooling device (chiller): RIOU RO-30A - temperature controller in the range 0-400°C (8 pcs.) - heating power: 47.2 kW - pump po ...
Heidelberg Stahlfolder KD78.1/4 KTL-PD, Year 2002 Palletfeeder 4 pockets 2 knives Delivery SB-66/MP. D Stream delivery Gate-fold unit Etc. Available: immediately
BPR BA 35 Asymmetrical CNC tube and profile bending machine with 3 driven rolls Factory REMANUFACTURED, RETROFITTED and UPGRADED in 2020. AS-NEW CONDITION MACHINE ! Contact: info@roce.hr / roce.strojevi@gmail.com Reason for Sale: Very low operating hours. Stored for years as a properly packed backup machine. In 2020, it was sent to the original manufacturer for full factory refurbishment and modernization (although fully functional at the time). After refurbishment, it was again kept in storage as a reserve unit. Now sold only because it is no longer needed as backup capacity. Excellent condition. Ready for immediate use. Description: This CNC-controlled profile bending machine is designed for complex bending operations with continuous radius variation. It allows choice between automatic and manual operating cycles, providing flexibility for different produc ...
Stephan UM44-3 Universal Machine Double coat Temperature sensor Timer Vacuum Pump and Setup Dome on the lid for mounting a feed device or pressure relief valve 3 speeds Knife insert + mixed insert Oil for vacuum pump and instruction manual
Key data: 3500 mm, 12 mm
Schäfer SVRM 3500/12 - CNC 4-roll bending machine - Siemens CNC control with joystick for roller positioning and digital display (renewed in 2006) - Hydraulic tilting of the upper roller by control panel - Rollers made of quenched and tempered material with a strength of 900 N/mm² - Year of construction 1989 Technical data - Max. sheet width: 3500 mm - Bale length of rollers: 3550 mm - Max. sheet thickness bending: 12 mm - Max. sheet thickness bending 4xS/3xS: 8 / 6 mm - Max. insertion limit of the sheets at 20% work hardening: 380 N/mm² - Upper and lower roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest radius to be achieved: 220 mm - Feed speed lower roller: 200 mm/min - Feed speed side rollers: 700 mm/min - Total installed capacity: 22 kW - electr. Control: 380 V / 50 Hz / 3 Ph - Machine weight: 21100 kg
GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mMovement X / Y / Z600/560/510 mmRapid feed X / Y / Z30/30/30 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque82 NmTorque (100% DC)54 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)600 KgWeight approx.5300 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Optio ...
grinding diameter: 390 mm grinding length: 650 mm centre height: 200 mm total power requirement: 46 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012 ...
number of spindle speeds: 6.000 U/min tool taper: BT50 numbers of positions in the tool changer: 121 control: FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000 0,001 deg The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ungerer 1800 x 5 mm Max sheetwide: 1800 mm Max sheetthickness: 0,7 > 5 mm Max speed: 16 m/min Number of flattingcoils: 9+8 rolls (dia 55 mm) Power : 28 HP Weight: 9,7 ton
Key data: 510 mm, 3000 mm, 4 St.
HOFMANN AHW 500 YOC 1991 Motor power: 4.0 kW Rated current: 9.5 A Max. planing width: 510 mm TERSA knife shaft (4-knife shaft) Integrated auxiliary stop SUVAMATIC knife shaft protection Joining strip with fastening rail Table length: 300 cm Table height: 84 cm Suction nozzle: 140 mm 4 pcs new knives Drive belt renewed The electrical system was renewed by the previous owner The machine does not have an engine brake. Transport dimensions (approx. dimensions): L: 312 cm W: 140 cm H: 115 cm Weight approx. 900 kg
Dowel vending machine Koch with a very good condition Incl. window tools IV 68- IV 72- IV-86 as good as new 13,000 EURO Furniture processing is possible: minimum size 30 mm The system is available for immediate delivery PS.: Technical data on request!
Manufacturer: Hexagon Model: Global 071007 Year of Manufacture: 2014 Find more here - / Contact us at -
Manufacturer: Keyence Model: IM 8020 Year of Manufacture: 2023 Find more here - / Contact us at -
Injection moulding machine Arburg 420C 1000-290 BJ 2007
maximum number of results exceeded
please refine your search
