135,352 used machines on RESALE, but how to find them? Machine Search
Item condition: in working order Availability: immediately Connected loads: 400 V, 50 Hz Dimensions (LxWxH): 1250 x 780 x 1350 mm Machine weight: approx. 580 kg
Stock number: 4017 PROFILE BENDING MACHINE Manufacturer: Roundo , Type: R4 Machines NO.: 1735, Year of manufacture: 1977 Specifications: Angle steel 90x9 mm Flat steel 200 x 30 mm Frame steel upright 100 x 18 mm Round steel 60 mm Load by steel 40 Kg/mm2 30 cm3 Upper roller 275 mm Ø Shaft dia. 105 mm Square steel 55 x 55 mm T-steel 90x10 mm Total power 5.5 kW Length: 1500 mm, Height: 1400 mm, Width: 1400 mm, Weight: 2500 kg
Bread Crumber Type BG-2/5.5 (identical with HOMMEL-Rotormat Super-2000) - exhibition machine, brand new-condition, year of manufacture: 2025 - with exchangable sieves for crumbing of all kind of bread, production of breadcrumbs, grinding and grating of nuts, cheese or herbs, including 3-, 5-, 8- and 12 mm sieves, capacity up to 800 kg per hour (depending on the product), machine made from stainless steel, electrical supply: 400V/50Hz/3~, power supply: 5.5 kW/7.5 HP
Item condition: in working order Availability: immediately • Cooling • Display control • 2 motor speeds • 4 program presets Each of our cream machines is equipped with integrated cooling that keeps your cream fresh and chilled at all times, so you always get a perfect consistency. For optimal adaptation to your individual needs, the machine has several features. The disinfection system ensures hygienic cleaning of the device and eliminates unwanted germs and bacteria, which contributes to even safer use.
Evaporator Rivacold -Type: RX50338 -Cooling capacity: 8 kW -Fin spinning: 8 mm -Electric defrost -Fans: 3 x 350 mm -Dimensions: 1750 x 570 x 460 mm -Quantity in stock: 10 -Reference number: CH 586 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work
Item condition: in working order Availability: immediately Connected loads: 400 V, 50 Hz Dimensions: 1250 x 780 x 1350 mm Machine weight: approx. 580 kg
Item condition: in working order, well maintained Availability: immediately
Item condition: in working order Availability: immediately Nominal voltage: 400 V Frequency: 50 Hz Type of current: 3 Ph
Item condition: in working order Availability: immediately Location: Lower Saxony Current type: 3-N-PE Frequency: 50 Hz Operating voltage: 400 V
Norfoil 2000 reel to reel hot stamping press Web width 160 mm Unwind Web guide Cutting Lamination Hot foil Rewind Waste rewind Razor blade slitter
sheet width: 3100 mm plate thickness: 6.0 mm ST pre-bending: 4.0 mm ST diameter of upper rolls: 200 mm side roll diameter: 165 mm diameter of lower rolls: 190 mm bending speed: ca. 5.0 m/min Control: DIGI oil volume: 80.0 Liter voltage: 380 V total power requirement: 6.0 kW weight: 6000 kg range L-W-H: 5250 x 1500 x 1400 mm very good condition () Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel Operation - control of all rolls and machine axes Digital position display Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1 ...
x-travel: 1900 mm y-travel: 800 mm z-travel: 800 mm Control: control: 426 Heidenhain : dismantled: total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 3048 mm table width: 1524 mm burner heads: 1 stroke: 270 mm speed: 100 m/min dimensions: 8900 x 2260 x 2220 mm weight of the machine ca.: 7.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This machine is used in the beverage industry for accurate and reliable bottle labeling.
Miho David 2001 Empty Control System automatically inspects glass bottles for foreign bodies, dirt, liquid residues and bottle defects before filling. Only flawless bottles are filled. Robust design and reliable performance increase process reliability and product quality in beverage production lines. - Up to 25,000 bottles/hour - from left to right
20,000 bottles per hour Pros: •High labeling speed •Automatic feeding and precise positioning of the bottles •Modular design for different bottle sizes and shapes •Easy to maintain and cost-efficient in operation Machine Condition: •Used machine in good condition •Previously used in the beverage industry •Regularly serviced •with spare parts Labeling stations 2 × cold glue 3 × self-adhesive 1 × tax label
3 x Injection moulding machines Stork 440 to 1 x Injection moulding machine Stork 660 to 2 x Injection moulding machine Stork 900 to
Base frame with adjustable base made of stainless steel Unwinding device for sleeve rollers with pull-off motor Sleeveformer and transport with servo motor and control Sleeve cutting device by means of rotating knives Sleeve lift device with sleeve holder Photocell control for product recognition Print Mark Recognition Complete Siemens control panel with control panel (touch panel) Pneumatic safety protection machine Sleeve Roll Monitoring Sleeve Roll End Monitoring Pneumatic connection 6 bar 1/2" E-connection 400 V, 50 Hz, 2 kW Maximum flow height for products 400mm Double sleeve roll unwinding with cutting and joining table Piece of sleeve storage (80 m) Product separation and product orientation Flail motor station for positioning the sleeve Needle system tor Sleeve Running sleeve holding station Platform with steps and railing for ergonomic operation of the sleeve ...
PET blow moulder SIDEL SBO 18 The machine was upgraded in 2006 with a new program for an output of 26,500 bph. The machine includes preform tippers for 2 octabins each. Preform steep conveyor to the inlet into the machine.
workpiece diameter: 125 mm module: 4 control: SIEMENS SINUMERIK travel -x axis: 105 mm travel -y axis: 40 mm travel -z axis: 500 mm workpiece diameter: 17 - 39,5 mm workpiece height: 6 - 15 mm Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working diameter: 140 mm turning diameter: 185 mm workpiece length: 120 mm control: Siemens turning speeds: 7.000 U/min Vertical Turning Machine | FAMAR - BISUB 160 2G The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BISUB1602G | BISUB160 2G | BISUB-160 2G The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The GERNEP Rollfed 24-1056 2RA from 2013 is a reliable roll-fed labeller for PET and glass bottles with high production capacity. With 24 stations and 2 gluing units, it enables uninterrupted operation and precise labeling. Particularly suitable for the food and beverage industry.
Used, in very good condition Packaging type : Tetra Prisma Aseptic Package volume : 1000,00 ml Shape of packaging : Squareline
Reliable rotary labeling machine for wrap-around labeling with pre-cut labels and hot glue. Suitable for PET and glass bottles up to 1.5 L. Equipped with Nordson Problue 4 glue system and Siemens PLC control. Bottle type : PET or glass bottles (0.5L - 1.5L)
Folding machine Horizon MT/PF-40L, machine number 008002, two pockets, pre-stored programs, electrically controlled pockets, in good condition, immediately available, Technical data: Maximum format: 320x630 mm Dsbrex S Etaj Sb Shuokg Minimum format: 125x128 mm Weight: 40–160 g/m² Speed: 23,000 cycles/h 2 parallel cassettes 230V power supply Electrically controlled boom Counter with collection function Stepless speed and feed adjustment Stack Feeder Soundproofing cladding on all units and cassettes Documentation
For aluminium and PVC profiles Max. cutter diameter: 180 x 30 mm Max. profile height: 95 mm Stroke: 325 mm Pneumatic material tensioners Manual feed Minimum quantity spraying Weight: approx. 150 kg
Langguth Deckler+Labeller sysLAN 720+selfLAN 510 Automatic capping and adhesive labeling in one machine Very good condition, straight from production
Milling cutter diameter 250 mm Max. milling depth: 80 mm Milling width: 330 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg
faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 1400 mm control: Siemens 840D travel -x axis: -80 / +1100 mm travel -z axis: 1060 mm workpiece height max.: 1400 mm max. workpiece weight: 8000 kg Shank diameter: 200 x 240 mm table turning speeds: 2- 400 U/min drive capacity - spindle motor: 44 kW max. torque on the faceplate: 14510 Nm rapid traverse: 12 m/min turning speed range - milling: 0,01 - 7,4 U/min speeds of tool: 4 - 3000 U/min work piece power: 22 kW Torque: 840 Nm total power requirement: 90 kVA weight of the machine ca.: t dimensions of the machine ca.: m equipped with: - CNC control Siemens 840Dsl - C-axis - driven tools - tool changer 12-fold (driven tools) - complete enclosure - chip conveyor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The used Kemper ST75A spiral mixer with 2 stainless steel boilers each is immediately available in our warehouse in Bielefeld. - Type: ST75A - a machine with 2 boilers - for max. 75 kg flour or for max. 120 kg dough - With 2 automatic timers - Shell diameter 76.5 cm - Boiler capacity: 175 litres - Boiler drive via friction wheel - Boiler can be manually locked - Extendable - With 2 timer relays automatically - 2 speed settings: fast and slow - Flour dust cover - Stainless steel spiral and tool - Boiler also made of stainless steel - Machine is anchored to the ground with 2 screws - Machine head moves up or down when the boiler is retracted and retracted - 400 volt power connection - Robust and stable machine - Machine completely repainted - All wear parts renewed More information and pictures, as well as shipping costs and trade-in on request. We are constantly ...
Used Head Machine / Dough Divider FORTUNA, Type: KM5 -Refurbished- - 5 rows - is currently being overhauled - Weight range: 20 - 135g Visits and test runs are possible by arrangement.
HAKO snow blower, PTO drive . rpm.(in driving tr. left dr.), with attachment device quick coupling triangle cat. 0. Manually swivelling ejection chimneys, sliding skids. Clearing width approx. 1.15 m, clearing height approx. 1.20 m. Condition good, apparently unused, with flash rust. Chain drive for left-handed PTO. Other snow blower: Zaugg 55-110, working width 110 cm, PTO drive 1,000 rpm clockwise rotating i.F.; Discharge chute can be swivelled by hand crank, coupling plate with swivel screws. Winter service technology, used parts and more in stock, more on request ! Jodau Machine Trade Municipal, Environmental & Green Maintenance Technology Inh. Joachim Dau 24941 Flensburg, Wieselhof 29
Spiral mixer DIOSNA, type: SP 24 -Very good condition- - Kneader suitable for up to 24 kg dough - With timer - 2 speeds - Rideable - Condition: Very good, ready to use Inspection and test run are of course possible by arrangement.
Key data: 480 mm, 2000 mm, 3050 1/min
Stock number: 4009 CNC LATHE Manufacturer: Gildemeister , Type: CTX 600 Machines NO.: 361238, Year of manufacture: 1997 Specifications: Max. circumferential diameter 480 mm dia. Max. turn. About Bed 650 mm Dia. Turning length 2000 mm Main motor power 27 kw Main spindle speed range 4-3050 rpm Tool turret with 12 stations Powered stations revolver 1 6 pieces. Control Gildemaister EPL Fabr. Accessories: Hydr. Chuck main spindle 400 mm dia Tool holder vdi 50 Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. 15 Chip conveyance. Cooling water system. Length: 4000 mm, Height: 2100 mm, Width: 2500 mm, Weight: 9100 kg
Used spiral mixer DIOSNA, type: SP 40 -in bakery condition- - 2 speeds - 1 time clock - Boiler and spiral made of stainless steel - Good condition, technically tested and cleaned - Kettle volume: for max. 40 kg dough - El. Connection: 280 V, 50 Hz, 6.5 A
Side Tables, Air Table, Programmable, Standard Accessories
Dough divider for rustic rolls and ciabatta incl. sowing KEMPER, type: Quadro Fit -In bakery condition- - Head machine / dough divider KEMPER Quadro Fit - Including various cutting rollers - Adjustable speed mesh band - Sowing station with moistening and seed pad - Adjustable speed turntable - Plate included - Condition: good - Ready to use Visits and test runs are possible by arrangement.
Key data: 5000 kN, 2 g/PS, 90 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM300-1900CX Year of Make: 2011 Clamping force: 300 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Maximum displacement: 769 cm³ Moulded part weight: 692 g/hp Control: MC6 Equipment: 3 pcs. core train Djbr Rvoxyrc Isf Nysul Interface Robot 45-fold hot zone channel control Interface temperature control unit Approx. 51,000 operating hours
Key data: 2500 kN, 579 g/PS, 60 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET250-840 Concept Year of Make: 2004 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 60 mm Max. displacement: 636 cm³ Moulded part weight: 579 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W633-931 2 pcs core train
Key data: 2000 kN, 352 g/PS, 50 mm
1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2000 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 450 mm Opening travel: 700 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 352 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control
Key data: 2000 kN, 216 g/PS, 40 mm
1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2001 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 550 mm Opening travel: 700 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control
Key data: 2000 kN, 216 g/PS, 40 mm
1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2004 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 500 mm Opening travel: 750 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control
KRONES Sleevematic (2008) is a high-performance sleeve labeling machine, developed for the precise application of full-body and tamper-evident labels. The machine is suitable for different container types and formats, providing reliable operation and consistently high labeling quality. Ideal for applications in the food and beverage industry where flexible sleeve labeling is required. Capacity : 40,000/h Shrink labeling : KronesSleevematic795-1432008
Key data: 600 kN, 94 g/PS, 30 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train
Programs with touch screen color display, Side Air-Tables, Light Bariers, Air Table, Standard Accessories
Key data: 4200 kN, 2 g/PS, 80 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM420-4300CX Year of Make: 2012 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 80 mm Max. displacement: 1,810 cm³ Moulded part weight: 1,647 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit
Key data: 2500 kN, 476 g/PS, 55 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit
Colour Monitor, Touch Screen, Programs, Chromed Air Table, Light Barriers, Resopal Side Tables With Air, Spare Knive, Books & Manuals
maximum number of results exceeded
please refine your search
