bag in box used for sale

Battery interchangeable rack, transport rack, storage rack for forklift batteryChanging table, battery pallet, battery swapping system, battery swap trolleyManufacturer: WELUX 2.5Type: WS2-RR-2-300Load capacity: 2x 500 kg per compartment = 1000 kgSlide-in dimensions per compartment W x D = 300 x 920 mmSlide-in dimensions without centre bar W x D = 655 x 920 mmAdjustment height: 80 to 200 mm - centre bar can be dismantled - also suitable for sheet material - 16 pieces of galvanised steel castors 50 mm - 4 pieces of fixed castors 100 mm, 2 pieces rotatable with fixed castors

Ingot Contactor, DC Contactor, Contactor, DC Switch, Circuit Breaker, Circuit Breaker, High Voltage SwitchABB Type NORR63-03 CC-SPFPL7146886R6000CTC2014028R0001Contactor Type: NC Main ContactsDesign: Open on Ingot MountDrive: AC + Sheet Metal Magnetic Circuit + Rectifier + Saving ResistorDrive Rated Voltage: 220-230 V / 50-60 HzMain Contact Rated Current: 63 AHaupt Contact Nominal Voltage: 1500 VDCAnnumber of Main Contacts Normally Close: 0Number of Main Contacts NC: 3Number of auxiliary contacts: 1 NC + 1 NO +

Internal threading machine Hagen & Goebel type HG 124Masch. No. 4112 Year of construction approx. 1980Cutting capacity in steel M3 to M10Cutting capacity in cast iron M3 to M15Cutting capacity in brass M3 to M17.5Throat depth 250 mmPine stroke 80 mmTable size 345 x 245 mmSpindle speed 200 - 1000 rpm. Motor power 0.55 / 1.0 kWNerg connection 380 volts, 50 Hz- 6 speed levels via belt change (3 steps via belt + 2 motor speeds)- thread pitch via guide cartridge- 2 pieces guide cartridges with 0.8 mm and 28 G

Suspension crane runway Crane system DEMAG type KBK 1Year of construction approx. 2000Monorail overhead track with monorail crane bridgeLight crane system system made of KBK modular system profilesLifting capacity: 125 kgSpan: 5 metresDistance longitudinal rails: 4.1 metresLongitudinal beam length complete: 12 metresGirder profile cross beam = KBK1Girder profile longitudinal rails = KBK1Consisting of:29 metres System profile KBK-1 (4x 6000 mm + 1x 5000 mm)1 piece carriage for the crane suspension2 pieces Double carriage for the longitudinal rails10 pieces Screw claws for the

Static frequency converterManufacturer: GARBE LAHMEYER & Co. AGTyp SU3760.2aFZ231Year of manufacture: 1989Fabr. No.: A2K 60229 0001Nominal power 500 kVAStromart DNetching voltage 380 VoltInput frequency 50 HzInput current 760 Amp.Type power Input 760 Amp.Output voltage 380 VoltOutput frequency 50 HzOutput current 760 Amp.Type power output 760 Amp.- Control unit GARBE LAHMEYER Type AEB 60Dimensions cabinet (W x H x D) 2250 x 800/900 x 2550 mmTransport dimensions (W x H x D) 2430 x

TIG and Electric Welding Machine / Inverter ESAB Type LTN 160WIG Welding Machine for TIG and ElectrodeFabr. No. 405-423-0479 Year of construction approx. 2010Power TIG 160 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDL power electrode 140 Amp. = 35% ED 110 Amp. = 60% ED 80 Amp. = 100% EDNetz connection 230 Volt, 50 Hz, Schuko plug- stepless power adjustment- 2 stroke and 4 stroke operation- Operating mode rod electrode- 12 meter TIG hose package with hand torch- only DC = DC- HF ignition-

Single-column eccentric press WEINGARTEN type E 40Masch. No. 643/62 Year of construction 1963Pressure capacity 40 ton. Projection 250 mmTable opening 150 x 80 and 200 mmTable area 560 x 460 mmPlunger area 250 x 200 mmPlunger stroke adjustable 8-88 mmPlunger adjustment 63 mmInstallation height 320 mmPin hole 40 mmStroke rate 100/130 strokes / min. Motor power 2.2 / 3 kWNetz connection 400 volts, 50 HzTable height above floor 840 mm- Clutch-brake combination by WEINGARTEN friction threaded coupling with TDC

Internal threading machine HAGEN & GOEBEL type HG 10Tapping machine, vertical tapping machineMasch. No. 4462 Year of construction approx. 1980Cutting capacity in steel M3 to M10Cutting capacity in cast iron M3 to M16Cutting capacity in brass M3 to M 18 mmProjection 250 mmPine stroke 80 mmTable size 340 x 240 mmSpindle speed 200-1000 rpm. 6 stagesmotor power 0.55 and 0.75 kWNet connection 380 volts, 50 Hz- 6 speed levels by 2 motor speeds and 3 belt steps- thread pitch over

TIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC)TIG Welding MachineFabr. No. 0507214 Year of construction 2007Power TIG 225 Amp. = 40% ED 180 Amp. = 60% ED 140 Amp. = 100% EDLight electrode 180 Amp. = 50% EDNew connection 400 Volt, 50 Hz. 16 Amp. Plug- DC welding machine- stepless power adjustment- 2 stroke and 4 stroke operation- HF ignition- Pulse welding mode- Rod electrode operating mode- Water cooled- 8 meter TIG hose package with hand torch-

TIG and Electric Inverter Welding Machine ESS Type 170 ATG (AC-DC)TIG Welding MachineFabr. No. 0907036 Year of construction 2007Power TIG 170 Amp. = 35% ED 130 Amp. = 60% ED 110 Amp. = 100% EDL power electrode 140 Amp. = 35%EDNetz connection 230 Volt, 50 Hz.- DC and AC welding- HF- ignition- Stepless power adjustment- 2-stroke and 4-stroke welding operation- Pulse welding mode- Rod electrode operating mode- 8 meter hose package with TIG torch- Shielded gas pressure reducer-

Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. To ...

Key data: 4000 kN, 80 mm

Machine + Viper Robot 12

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

At Dairy Machinery UK we offer a large variety of Spare Parts for the below manufactures. Keeping our ongoing assistance with our customers we have achieved best prices for genuine Spare Parts Directly From Manufactures ., Spare parts from these manufacturers, - Alfa Laval, - Tetra Pak, - GEA Westfalia, - GEA Tuchenhagen, - GEA Hilge, - GEA Niro Soavi, - GEA Aseptomag, - Fristam, - Pentair Südmo, - E&H (Endress und Hauser), - APV Gaulin, - APV Rannie, - SPX, - HST, - Buschjost, - Samson, - Sumitomo, - other manufacturers on request, Contact Us for your requirements., Parts available: Alfa Laval Tetra Pak GEA Westfalia GEA Tuchenhagen GEA Hilge GEA Niro Soavi GEA Aseptomag Fristam Pentair Südmo E&H (Endress und Hauser) APV Gaulin APV Rannie SPX HST Buschjost Samson Sumitomo other manufacturers on request, Gaskets for Pasteurisers: GEA, ALFA LAVAL , TETRA PAK, FISCHER,ARSOPI, PIETRIBIASI ...

Brand & Model: SANDRETTO Serie NS - 230 T Reference: NS 860/2300 Condition: Very good Technical Specifications: Clamping force: 230 T / 2300 KN Tie bar spacing: 585 x 585 mm Platen dimensions: 860 x 860 mm Mold thickness (Min/Max): 210 - 630 mm Opening stroke: 580 mm Injection volume: 475 cm³ Injection pressure: 1876 bar Screw diameter: 50 mm L/D ratio: 20 Dimensions & Weight: Weight: 10 500 kg

Key data: 1500 , 50

SANDRETTO serie 8 612/150 with SEF 90 Clamping force : 150 T Distance between tie bar : 460 x 460 mm Mould thickness min / max : 155 - 560 mm Opening strocke : 500 mm Injectable volume : 392 cm3 Pressure on material : 1560 bars Screw diameter : 50 mm Weight : 7000 kg Dimensions : 6,36 x 2,08 x 1,50 m

SANDRETTO serie 8 790/240 Clamping force : 200 T Distance between tie bar : 570 x 570 mm Platen dimensions : 860 x 860 mm Mould thickness min / max : 210 - 730 mm Opening strocke : 630 mm Injectable volume : 546 cm3 Pressure on material : 1450 bars Screw diameter : 55 mm Weight : 11 500 kg Dimensions : 7,68 x 2,35 x 1,78 m

For sale are 128 new safety valves BOGE Id.Nr.: 564020203 Pressure 11.0 bar / single certificate Connection: G 1"-M Material: Brass Gasket: NBR Temperature: -10+100 Nominal diameter: DN 18mm Approval: CE ISO 4126 Sale possible in packages of 50 pieces or more Sale without warranty

An optical inspection machine Bizerba for label and seal inspection in packaging lines is available. Camera technology: dual-camera configuration, camera placement: top and bottom, conveyor belt speed: 90m/min, machine dimensions X/Y/Z: approx. 2100mm/900mm/1600mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

Selling an inventory of a mechanical engineering company. various lathes, milling machines, rolling machines, saws, etc. Pictures on request. The machines are only sold as a package! Not individually

Sandretto serie 8 MEGA T 1000 année 1996 Force de fermeture : 1000 T Diamètre vis d'injection : 150 mm Volume injectable : 11296 cm3 Epaisseur moule min/max : 450mm/1350 mm Course plateau mobile : 1350 mm Dimensions des plateaux : 1820 x 1820 mm Passage entre les colonnes : 1230 x 1230 mm Diamètre des colonnes : 220 mm Quantité d'huile contenue : 1500 L Dimensions : 15,1 x 3,15 x 2,81 m

Ruwac Industrial Vacuum Cleaner DS 2520 M-B1 with Extraction Arm 5.5KW

SANDRETTO serie 8 430/95 Clamping force : 95 T Distance between tie bar : 370 X 370 mm Platen dimensions : 560x 560 mm Mould thickness min / max : 100 - 460 mm Opening stroke : 410 mm Injectable volume : 286 cm3 Pressure on material : 1500 bars Screw diameter : 45 mm Weight : 5 400 kg Dimensions : 5,67 x 2,03 x 1,32 m

Industrial - Swing Gate 8 x 2 m Dimensions on each side of the door Width approx. 395 cm Height approx. 220 cm Strut diameter: 2 cm Galvanized steel Barbed wire holder Climb-over protection Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Debus DDS 118 / 5/ 23 Chips Industrial Vacuum Cleaner 6 bar 4.6 m³/min Original price 4604,- € Manufacturer: Debus Model No.: DDS 118 Full Name: DDS 118/5/23 Chips Year of Make: 2016 Fabr.-Nr.: 278 Operating pressure: 6 bar Suction power: 4.6 m³/min Air requirement: 1.3 m³/min Weight: approx. 30 kg Capacity: approx. 40 litres Dimensions: 55 cm long, 60 cm wide and 150 cm high Condition: used Scope of delivery: see pictures Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosts. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machines More items - new and used - can be found in our shop! International shipping costs on request!

Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible.

An induction system ITG for heat treatment of workpieces with vertical chain lift system is available. Process: heating/hardening, number of inductors: 2, inductor type: copper coil, cooling: water cooling, connected load: 382kVA, rated current: 552A. Documentation available. An on-site inspection is possible.

Injection molding machine

Injection molding machine

Injection moulding machine Arburg Allrounder 470 H 1000-170 BJ 2010 Clamping force 1000 kN Screw diameter 30mm Screw length 930 mm Shot weight 77g With Arburg robots

Brevetti K32-400 automatic inspection machine for cartridges, inspection of bubbles, fill level, cap defects, stopper defect/position, particles (with three inspection units), with corresponding format parts suitable for containers with a diameter of 8 to 52 mm and a height of up to 150 mm, includes format part for catridges Ø8.65x63 mm and Ø8.65x76 mm, electrics 400V, 50/60Hz, 3Ph, power 8 kW, compressed air 5 bar, height of infeed/outfeed 900 +/- 25 mm, machine floor space approx. 2400 x 2600 mm, machine height approx. 2440 mm, machine net weight approx. 2800 kg, capacity up to 400 cartidges per minute

Key data: 1100 , 40

Machine de moulage par injection ENGEL VC330 -110T Référence : VC 330 /110 Force de fermeture : 110 T Année de fabrication : 2004 Nombre d'heures de travail : 84000 heures Diamètre de la vis : 40 mm Volume injectable maximum : 251 cm3 Epaisseur du moule : mini : 300 mm Poids : 7300 kg Dimensions : 4,36m x 1,48m x 2,04m 4,36 m x 1,48 m x 2,04 m

Incubator Manufacturer: Thermo Scientific Forma Steri-Cycle Model 371 Year of construction 2014 Very good condition The Thermo Scientific Type 371 CO2 Incubator is ideal for sensitive incubation applications and ensures optimal cell growth. This CO2 incubator can be used in bio tissue engineering, in vitro fertilization (IVF) clinics, and academic hospitals, among others. Specifications Voltage: 230V, 50/60Hz Current: 4.4A Temperature range: + 5 °C above ambient temperature up to 50 °C CO2 range: 0 – 20% Capacity: 184 L External dimensions (W) x (D) x (H): 66 x 64 x 98 cm Inner dimensions (W) x (D) x (H): 47 x 47 x 65 cm

Key data: 1100 kN, 254 g/PS, 45 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine: · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 254 cm3. · Screw diameter: 45 mm. · Maximum distance between plates: 800 mm. · Control: IQT44. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for use.

Key data: 1100 kN, 99 g/PS, 30 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 99 cm3. · Screw diameter: 30 mm. · Maximum distance between plates: 620 mm. · Control: IQT33. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for operation.

BILLION 200 T série HERCULE H 780/200 Force de serrage : 200 T - 2000 KN Groupe d'injection : H 780 Diamètre vis. : 50 mm Distance entre colonnes : 500 x 500 mm Dimensions des plateaux : 760 x 760 mm Epaisseur mini/maxi du moule : 280 - 580 mm Course d'ouverture : 560 mm Volume injecté : 422 cm3 Pression matière : 1843 bars Dimensions : 7,1x 2,1 x 2,6 m Poids : 14 000 kg

For sale is a semi-automatic cup filling system for drinking yoghurt, ayran or similar. Key data on the plant: - Semi-automatic, i.e. the cup must be inserted and the button pressed for each filling. - Lid diameter: 75 mm - Capacity: Up to 300 ml - Power consumption: 1 kW (230 V plug) - Pneumatic: Compressor required. If you are interested, our compressor can also be purchased. (Please inquire separately!) - Pipe connection DN 32 (direct connection to tank possible, so that the liquid can be sucked off the system with a slope - Country of manufacture: Turkey - Thermal sealing: temperature adjustable. Aluminum lids (75 mm) were used with this system. - Magazine for sealing board available. These are placed on the cup by the system itself - Filling capacity: Variable depending on the filling quantity: 250 ml were filled with this system. Here, about 600 cups/hour were possible.  ...

Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible.