130,509 used machines on RESALE, but how to find them? Machine Search
Dosing machine AG 8 DPE 250 built in 2012 with hot double jacket on the storage tank and accessories (filling heads and screw conveyor)
Immediately available completely overhauled injection pump
This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210
Beer bottling line, Framax 9-8-1 filler, pressure filler, double pre-evacuation, module block RFCI 09-08-1 DPS-C, year of construction: 2014, set up for 330ml bottles, with labeling machine, self-adhesive labels Beer Bottling line, Made by: Framax 9-8-1 Filler, Counter pressure filler, isobaric, double pre-evacuation, Modulblock RFCI 09-08-1 DPS-C, Year: 2014, adjusted to 330ml, 33cl, 0,33l glass bottles, Labeller Labelling machine, self adhesive labels
T16 - used approx. 50 m³ / 50,000 L steel tank, coated from the inside, insulated, covered. Technical details: Content: approx. 50 m³ / 50,000 litres Material: Steel tank with inner coating Manufacturer: Ermert GmbH Certification mark: PA-VI 212.037 Dimensions: approx. Ø 2.90 m outside / 2.50 m inside × L 11.00 m × H total 3.00 m with base Other: Used steel tank with inner coating, insulated, covered with aluminum sheets. Former heating oil tank, professionally cleaned and in good condition. Horizontal, above-ground storage tank on 2 concrete bases, dome on the top of the tank, several inlets and outlets. Only the pure tank is sold, without add-on parts such as scaffolding, pipes, fittings and accessories. The container can be used as a storage tank for many different media, e.g. as an extinguishing water tank. Price on request. Transport can be organised at a reas ...
An inspection system for bottle label inspection is offered, Throughput capacity 15,000 bph With 3 cameras and control
Incl. control and control panel Axles: 6 Hand load capacity 16 kg
Year of Make: 1989 Overhaul: 2020 Capacity: up to 12,000 bph 0.5l Counter-pressure filler for beer with long pipe Product: Beer, soft drinks and mineral water Bottle: Glass, 0.33; 0,5; 0,75; 1.0 L Capper: Crown cork
Bosch Injection Pump for MAN D2842 LE211 with GAC controller, cf. MAN part number: 51.11103-7451 59.11103-7451 N (l/min): 750 RW (mm): 12.7 or 13.6 EPP-FM (mm³/H): 332 or 367
Inv. Num. : 7714 Type: PJS Producer: AMT Created: 2021 Parameters: The device is in good condition.
Inv. Num. : 7715 Type:- Producer: AMT Created: 2014 Parameters: Capacity: 2000 kg/hod
Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (new bearing, 4 x new transport belts/belts, etc.) Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) Documentation: Operating instructions, spare parts catalogue and electrical diagram available If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.
B&A REF: 9053 TON: 80 SHOT WEIGHT: 183 SCREW DIAMETER: 40MM STROKE VOLUME: 201CM3 INJECTION PRESSURE: 1860AR PLATEN SIZES: 670 X 670MM DBTB: 420 X 420MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 8.12KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
Table dimensions: 1000 x 800 mm Auction-ID: A7-46287-9
Key data: 700 kN, 35 mm
used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English ...
Load capacity: 2500 kg Fork length: 1150 mm Auction-ID: A7-46287-126
Bosch Injection Pump for MWM 232 for sale Bosch Number: 62801845
100 pieces of inserts NEW consisting of: 30 pieces CNMG120408 for steel 30 pieces CNMG120408 for stainless steel 20 pieces CNMG120408 for aluminum 20 pieces CNMG120408 CERMET The composition of the set can be changed on request.
100 pieces of inserts NEW consisting of: 30 pieces APKT1604 for steel 30 pieces APKT1604 for stainless steel 20 pieces APKT1604 for aluminum 20 pieces APKT1604 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
100 pieces of inserts NEW consisting of: 30 pieces WNMG080408 for steel 30 pieces WNMG080408 for stainless steel 20 pieces WNMG080408 for aluminum 20 pieces WNMG080408 CERMET The composition of the set can be changed on request.
100 pieces of inserts NEW consisting of: 30 pieces R390-11T3 for steel 30 pieces R390-11T3 for stainless steel 20 pieces R390-11T3 for aluminum 20 pieces R390-11T3 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
100 pieces of inserts NEW consisting of: 30 pieces TCMT16T304 for steel 30 pieces TCMT16T304 for stainless steel 20 pieces TCMT16T304 for aluminum 20 pieces TCMT16T304 CERMET The composition of the set can be changed on request.
Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 392 cm³ Injection Pressure: up to 2,100 bar Injection Rate: approx. 200 cm³/s Plasticizing Capacity: approx. 30 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 50 kN Clamping Unit Clamping Force: 1,900 kN (190 t) Clamping System: Zhafir Zeres all-electric with servo-hydraulic auxiliaries Platen Size (H × V): approx. 770 × 720 mm Mould Opening Stroke: 450 mm Max. Daylight Opening: approx. 900 mm Min. Mould Height: 200 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 40 / 30 kN Drive & Control Drive Type: Hybrid electric / servo-hydraulic (Zeres series) Connected Load: 45 kW Full Load Current: 76 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: SIGMATEK CNC-based control with Zhafir HMI touchscreen Equipment / Features Drive ...
100 pieces of inserts NEW consisting of: 40 pieces TPKN1603 for steel 40 pieces TPKN1603 for stainless steel 20 pieces TPKN1603 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
D+L Welding Inverter AC DC TIG 200 P AC/DC, TIG-TIG 200 A 230 V Weight approx. 25 kg
Original Danfoss frequency converter 1,5 kW 2,2 kW and many more
Equipped with Joskin distributor, Auction-ID: A1-40136-193
Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for hi ...
100 pieces of inserts NEW consisting of: 40 pieces TPKN2204 for steel 40 pieces TPKN2204 for stainless steel 20 pieces TPKN2204 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design f ...
100 pieces of inserts NEW consisting of: 40 pieces SPKN1203 for steel 40 pieces SPKN1203 for stainless steel 20 pieces SPKN1203 CERMET The composition of the set can be changed on request. Please let us know the desired radius when ordering.
maximum number of results exceeded
please refine your search
1.000 € 
