bag in box used for sale

Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutters: indexable insert end mills with internal cooling, 8 pieces -Receptacle: Ø 32 mm -Diameter: 32 to 43 mm, see photos / parts list -Levy/Price: complete -Transport dimensions: 400/200/H60 mm -Weight: 8.7kg

Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutter: indexable insert end mill with internal cooling, 2 pieces -Receptacle: Ø 25 mm -Diameter: 25 and 30 mm -Levy/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0kg

Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Handover: in current condition as seen -Reversible plate: 1 piece missing -Finger milling cutter: indexable insert end mill with internal cooling -Receptacle: Ø 30 mm -Diameter: 16mm -Dimension: 133/40/H40 mm -Weight: 0.4kg

Digital input module 16x24V DC 3ms PS416-INP-400 -Supply voltage: DC 24 ... 24V -Supply voltage type: DC -Number of digital inputs: 16 -Number of digital outputs: 0 -Input current with signal: 1 8.6mA -Permissible input voltage: -3 ... 30.2V -Type of input voltage: DC -Type of digital output: none -Maximum permissible voltage at the output: 0V -Electrical connection type: Plug connector -Delay time during signal change: 3 ... 3ms Explosion protection category: PS416-INP-400 -Weight: 0.2 kg

Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty cont ...

Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)

General SKULW008 MakeNetzsch Feinmahltechnik GmbH LocationGermany CEcheck TypeEPSILON 30 Pressure Working pressure5 Bar Main Features MaterialStainless steel Motor37 KW Specified Features - Inline mixer Capacity0,55 Ltr Motor37,0 KW ATEX II 2G Ex dII T4G With frequency controllercheck Rotor speed600 -3600 rpm With vesselcheck Capacity1500 ltr With jacketcheck 6 ltr Max. temperature60°C. MaterialStainless steel Information No.2500441-10 Year of construction2020 Mounted on framecheck With switchgearcheck ATEX compatiblecheck Extra SpecificationsSolids intake :50 - 5000 kg/h Suspension flow during solids intake 15 - 30 m³/h Max. suspension flow during circulation 67 m³/h (water) Technical specs Extra informationStandard rotor version”Inline high shear mixersPaints & coatingsNetzschMixers > Inline high shear mixersIndustries > Chemical > Paints & coatingsB ...

Net weight= 404 kg,

General SKU022A121 MakeBran + Luebbe TypeCentrisol MC-50 No.9190756 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor160 mm Specified Features - Inline mixer Continuous reactor(1x) Rotor sizesdia. 160mm, Mixing chamber dia. 200mm Inletdia. 50mm Capacitymax. 500 Ltr/Hr Motor7,5 KW, 400/690 Volt Rotor speed2915 Rpm Electric heating(330 Watt, 220 Volt, Max. 200 Degr. C.) MaterialStainless steel 1.4552 Information LocationBarneveld Floorspace0,6 x 0,4 m Total height1,5 m Weight150 kg Technical specs Extra informationmixing chamber dia. 200 mmInline high shear mixersDiscountBran + LuebbeMixers > Inline high shear mixersDiscountBrand > Bran + Luebbe What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

General SKU040Z166 MakeKinematica AG CH-6014 Littau TypeMegatron MT 1-90 MF No.M-90123 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor80 mm Specified Features - Inline mixer Continuous reactorInline dispersing processor (1x) Rotor sizesø 80 mm, Stator ø 90 mm Inletø 50 mm Outletø 50mm Number of stages:1 With mechanical sealcheck Motor7,5 kW (400V, 2950 rpm (Ex)) With variable speed drivecheck Rotor speed6000 rpm MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace0,8 x 0,8 m Total height1,5 m Weight360 kg ATEX compatiblecheck Technical specs Extra informationstator dia. 90 mmInline high shear mixersDiscountKinematicaMixers > Inline high shear mixersDiscountBrand > Kinematica What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...

General SKU040Z169 MakeHaagen & Rinau / Unimix TypeSH-500 No.301166/2 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor22 KW Rotor150 mm Specified Features - Inline mixer Continuous reactorcheck In-line homogeniser Rotor sizesø 150 x 150 mm Inlet120 mm Outlet75 mm Number of stages:3 Capacitymax. 36 m3/h With mechanical sealcheck Motor22,0 KW, 400 Volt With frequency controllercheck Rotor speed2900 rpm MaterialStainless steel 1.4306 (304L) Information With switchcheck With switchgearcheck Floorspace0,8 x 0,5 m Total height0,5 m Weight300 kg CEcheck Extra Specifications- mirror polished rotor and stator - stator with mechanical seal Inline high shear mixersDiscountHaagen & RinauMixers > Inline high shear mixersDiscountBrand > Haagen & Rinau What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...

Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Production speed: approximately 1200 cases/hour Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and acce ...

Used HEUFT empty bottle inspector 72000 BPHTechnical Specifications & Performance DataThis Empty Bottle Inspector (EBI) is engineered for high-speed beverage production and industrial packaging environments. Manufactured by HEUFT, the system combines a HEUFT InLine reflexx Release 9 inspector with a HEUFT Spectrum SX TB 72 pre-selection unit, networked for complete bottle flow control. Designed for integration in a used bottling line, it offers robust inspection performance for returnable glass bottles at line speeds up to 72,000 bottles per hour.Manufacturer: HEUFTPrimary model: InLine reflexx Release 9Pre-selection unit: Spectrum SX TB 72 (with Gateway II network interface)Additional platform reference: Spectrum TXYear of manufacture: 2009Maximum capacity: 72,000 bottles/hourBottle formats: Compatible with 0.33L and 0.5L bottle formatsContainers: Designed for Glass bottle handling (gre ...

Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. The machine utilizes a thre ...

Used Case Divider Inserter APE year 1998 Introduction In the world of bottling, every detail matters. Moreover, the efficiency and reliability of the APE Case Divider Inserter can make the difference between a smooth production line and additional costs due to unforeseen interruptions. The APE 2001 Model: A Pillar of Reliability This machine has been a benchmark in the bottling industry since its launch in 1998. This model is designed to accurately and swiftly insert dividers into 6 and 12-bottle cartons, ensuring efficient and uninterrupted production flow. Key Technical Features The robust design of the APE Case Divider Inserter and its advanced technology ensures consistent performance even in high-production environments. Additionally, the divider insertion system has been optimized to guarantee precise and uniform positioning, minimizing waste and enhancing packaging quality. Operat ...

Overview  This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection solution as part of a line modernization. The system includes the Heuft InLine reflexx Release 9 empty bottle inspector, the Heuft Spectrum SX TB 72 pre-sorter and the associated Heuft Gateway II for network connection. Interested parties have the opportunity to view the inspection line in operation by prior arrangement. Technical details Output: up to 72,000 bottles per hour Year of construction: 2009 Bottle types that can currently be processed: 0.33 l ale / green / crown caps 0.33 l ale / brown / crown cap 0.50 l NRW / brown / crown cap 0.50 l NRW / clear / screw cap 0.50 l Euro / brown / crown cap 0.33 l Krombacher-Bügel / brown / with embossing 0.50 l swing top / brown Cont ...

General SKU200W006 MakeHPV TypeRV Base SO No.2002-M-1 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm MaterialStainless steel 1.4404 (316L) Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Information With switchgearcheck (as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO. with: IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400V, EX. Nirosta vertical ...

<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Optionc Inkdrive (ZIP3), DQS, and TIFF output are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Inkdrive(CIP3), DQS, and TIFF output options are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

Brands E.W. Menn / Ingramatic / P&E / Hilgeland Diameter ranges from 1 mm - 20 mm

Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm

Homogenizer IUL instruments masticator modell: µ-Prozessor technical details: engine: induktion rotation speed: 500 - 1500 rpm speed increaser: 1:6 strokes/Sec.: 3.0 - 8.5 / 50 Hz 3.0 - 9.9 / 60 Hz voltage: 230 Volt ; 50 Hz / 110 V ; 60 Hz Leistung: 270 Watt dimension: l x w x h: 420 x 262 x 322 mm weight: 20 kg

2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 10.00 m and 178 baking surface floor 1.00 m and 178 baking square measure floor 78 x 58 cm 2 ofen Totally total area 20.00 m and 178 - 40tins stove is in very good state general and thorough outdated. functions as anew. a very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement with magnetic pumps including. 8 stuck anew stikkenwagen including. 80 stuck rand two rand alubleche sales incl. cargo and assembly on inquiry I also have to sell 2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.7 usable total area 7.00 m and 178 (7 auflage, high shelves) price on inquiry

6pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 One oven for 20 sheets Total usable area 10.00 m² Baking area per floor 1.00 m² Baking area size per floor 78 x 58 cm 6 oven Total total area 60.00 m² - 120plates Furnace is in very good condition, General and thorough overhaul. Works like new. A very good steam. Secondary circuit for the baking chamber. Turbo equipment. All maagnetic pump incl. Daub thermal oil boiler system with magnetic pump Including. 12 stuck stikkenwagen Sale incl. freight and assembly on request I also have to sell 2st. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 ( 7 editions, high shelves) Price on request

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

We have large stock of now OEM-obsolete used mechanical spare parts and electric / electronic parts for KHS, Kisters and ZVT tray- and shrinkpacking machines. Including AEG DPW 101/102, Kisters PC09 / Kisters PC20 / Kisters PC30 / Kisters PC40, and Indramat servo drives and controllers, Mayr Primo servo controllers. Details upon request. MAC 71C-0-JS-4-C/95-A-0/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-0/WI504LX/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LX/S001 MAC112B-0-GD-4-C/180-A-0/WI504LV/S011 MAC112B-0-GD-4-C/180-A-0/WI504LX/S011 Mayr Primo 2 + am 1 type P22.004.0 Mayr Primo Compact type P21.004.0 TR Electronic AE100S / HE100S / CS100S Bosch Rexroth PPC controllers including PPC-R02.2N-N-NN-P2-NN-FW, PPC-R02.2N-N-V2-NN-NN-FW and PPC-R22.1. For most of these units we can also provide FW up- / down-load / copy service. (including on-site).

Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

1 x Repiquet 2550mm wide x 820mm dia 4 roll inverted L Calender, Machine type: CALANDRE 4 CYL DE 820 x 2550, Machine no. 70-C9-87 Motorised nip adjustment, Peripherally drilled rolls, High pressure hot water hearing Bush bearings with flood lubrication, Hydraulic pre-loading to all rolls, Roll bending and unbending on roll 4, Cross axis on roll 3 and 1. Automatic bank sensors/control + camera system Traversing unit for roll buffing or sand blasting. 'Citroen' unidrive gearbox, type: SPECIAL, order no. 50491, Power 140/240 C.V. Speed 1500/2250, Output 46/59 with individual motor to each roll- Roll 1 and 4 - 130HP, Roll 2 and 3 - 240HP, Max calender speed 120m/min. Dual embossing station with approx 25 x embossing rolls (+ 5 x rubber pressure rollers) In very good condition.

Cat. No. 12-1175 in very good condition Measurements and Weight: LxWxH: 125 x 66 x 92 cm Weight: 195 kg Model: HTIRM Type: 40VT-DS NW 50 Pressure: 10 bar Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1125 in a very good condition Model: HTIRM Serial-No. 401543 Type: 40VT-DS NW 50 Pressure: 10 bar Measurements and Weight: LxWxH: 140 x 45 x 103 cm Weight: 140 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

4st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 9.60 m and 178 4 ofen Totally total area 38.40 m and 178 - 80tins stove is in very good state general and thorough outdated and checked. functions as anew. very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement including. 8 stuck anew stikkenwagen sales incl. cargo and assembly price on inquiry

Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm

1 of used wrap-around /traypacker, make ZVT (KHS), type Innopack WP 030 VH. New 2000. Operating side; left. Capacity upto 30 cartons/trays per minute (depending on product and blank dimensions). Siemens S7 PLC with OP 17, Indramat Servos, Nordson hot-melt unit. Wired for 400V / 50 Hz. Used for packing various 330 ml upto 2.000 ml glass and PET bottles as 8/12/20/24 on tray or in full wrap-around cartons. Last used as tray-packer only. Various manuals available. Condition: good. Dismantled and available cleaned ex-warehouse The Netherlands.

NEW COOLING TUNNELS BY BAK-TEC for bread, buns, croissant, puff pastry, fish, meat an all other foods etc. available with PVC-belt or stainless steel mesh belt Example: BTI-K 400 -- Working width: 400 mm -- Infeed: 1000 mm -- Outfeed: 1000 mm -- Cooling chamber: 6000 mm -- COPELAND cooling unit 3HP -- complete in stainless steel -- Belt speed: 0-3 m/min. -- Variable speed with inverter -- Belt specification: Food grade PU belt -- Cooling temperature: 0-10 °C -- German CE-confirmation -- 1 year warranty -- with manual book in German / English -- OPTION: -- suitable 400 mm Enrobing machine -- Inspection / Test run and delivery with startup on request -- Leasing business possible -- Publicity prices for SÜDBACK fair 2016 -- Already working for large factories in Germany

Load 6000 kg, pneumat. Drive

Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Stator: Diameter 120 mm Statorlänge: 240 mm Transmission: Motovario No.: 88232123 Type: MKM/4 / 50 40-210 min-1 Engine: ABB motors LKeistung: 4 kW 1000 kg / h Dimensions: LWH = 1800 x 400 x 500 mm Weight: 300 kg good condition

Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good

Cylindrical and fixed horizontal autoclave, used to sterilize food products. The equipment is totally made in stainless steel AISI-304. Manufacturer: VYC INDUSTRIAL, S.A. Type: AE-7800 Year: 2002 Maximum service pressure: 2 bars Design pressure: 2 bars Bell pressure: 2 bars Hydraulic test pressure: 3 bars Maximum service temperature: 110°C Design temperature: 150°C Elactic limit in design temperature: 140 n/mm2 Volume: 7,8 m3 Contained fluids: water/air 8 baskets in stainless steel and 6 trolleys are included. Cage dimensions: inside 980mmx1000mmx950mm. Outside 1070mm x 1060mm x 975mm. Recently overhauled and in perfect working order.

Ex Center screw pump in stainless steel Manufacturer: CSF inox Transmission: Motovario (speed controlled) Type: TK 100 Engine: Leroy Somer 380 V, 50 Hz, power: 9kW n = 144 min-1 Stator diameter: 160 mm Stator length: 390 mm good condition Dimensions: LWH = 2600 x 450 x 600 mm Weight: approx. 500 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Transmission: Motovario Type: TK 100 N1-n2 = 190-1000 min-1 Motor: ASEA Power: 9 kW 380 V Stator diameter: 140 mm Stator length: 600 mm good condition Dimensions: LWH = 2500 x 460 x 660mm Weight: approx. 400 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Getirebe: Lenze Germany Type: 11.331.31.25.4 / 8829 N1-n2 = 107-556 min-1 No: 8/1206/519 Engine type: 180 M / 4 K2465 380 V, 50 Hz Power: 18.5 kW 1460 RPM Stator diameter: 170 mm Stator length: 790 mm Dimensions: LWH = 2900 x 460 x 1000 mm Weight: 600 kg

PlateDriver Compact; good condition; maintained and checked by customer service; new pressure rollers; Violet Laser 60 mw Laser; with computer and software; Min. Plate size 340x400mm, max.615x745mm; Printing plate staerke 015-0.30mm; Dislocation 2540dpi; Machine is transport-secured; with development machine Heights Inca P 70 Y.O.; cleaned and checked; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 or 10.12,5.10 SX02 A furnace for 20 sheets Oven is in very good condition, General and thorough overhauled. Works like new. A good steam. Secondary circuit for the baking Chamber. Turbo equipment. All maagnetic pump incl. daub thermal oil boiler system with magnetic pump including. 4 piece rack new Sales including freight and installation upon request I also have to sale 2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 (7 Edition, high shelves)

Indramat modul TVD 1.2-08-03 Bosch Rexroth

Producer: INJECT STAR Type: FPW 17 Internal dimensions: Length 1620 x width 560 x height 1480 mm External dimensions: Lenght 1000 x width 500 x height 1050 mm 1 piece - not complet. Used pneumatic meat press for meat and bacon INJECT-STAR type FPW 17 with the possibility of the time setting and the automatic program - Air consumption approx. 7 bar Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Indramat Module DKC043-040-7-FW Bosch Rexroth

Indramat network module NAM 1.2-08 Bosch Rexroth

Comerio Ercole 1500mm wide x 550mm dia 4 roll inverted L calender. Peripherally drilled rolls (high pressure hot water heating), Motorised nip adjustment, Adjustable guides, Cross axis to roll 3, Unidrive gearbox with universal couplings. Motor power: Roll 1 and 4 - 50kW. Roll 2 and 3 - 60kW DC variable speed. Oil lubrication.

Indramat module NFD 02.2-480-016 Bosch Rexroth