bag in box used for sale

Permanent magnet motor, permanent magnet motor, electric motor, Perm.Magn-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Permanent magnet motor, permanent magnet motor, electric motor, Perm.Magn-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Qty. 1 Second-hand Aluminium Slitting Line Manufacturer: Stamco Inc., USA Year of Manufacturing: 1981 Strip Width: 1828 mm (72”) Trim 1981 mm (78”) Untrim Thickness: 0.2 mm to 1.27 mm (0.003” to 0.050”) Line Speed: 304 m/min - 609 m/min Thread Speed: 15 m/min Input/Output Coil Weight – 10 T Input Coil OD: 2400 mm (96”) Input Coil ID: 508 mm (20”) Capacity: 8 cuts of 1.27 mm and 10 cuts of 0.9144 at line speed 304 m/min 13 uts of 0.6 mm and 21 cuts of 0.25 mm at line speed 609 m/min

Key data: 20 mm

0.75 KW 380 V 16 A Röhm Drill Chuck Supra 1 - 13 mm Speed 210 - 2580 rpm With substructure Length 74 cm Width 30 cm Height 98 cm

Length 4 m Width 1.75 m Height 3.40 m Color: Green Chain hoist El. Steel TYPE. P12 8 m / 2 m min 6 m chain

Height=1.57 m, Overall length= 0.82 m, Overall width= 0.82 m, Net weight= 143 kg,

EQUIPMENT FOR GEOTECHNICAL AND ENVIRONMENTAL INVESTIGATIONS Original Gouda 20 ton static penetrometer for CPT tests, with mechanical tip and 50 operating rods mounted on Mercedes Benz Unimog Mod. U 404.0 Year 1972 Km 32.272, Mercedes-Benz 6 cyl. No. 130925 / 10 / 000070 DPSH heavy dynamic penetrometer for SCPT testing, hydraulic automatic release, vice with rod puller, 50 and 75 kg impact masses, with 15 rods Hydra Mini series portable hydraulic auger on wheels for surface environmental coring, with 250 kgm hydraulic gearbox and 1.00 m useful stroke

This 7-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details.

5-axis robot: 3 axes are driven by servo motors (electric); Axis A and C - pneumatic Touch control panel Robot with adapter and protective housing

Washing system for trolleys and rack trolleys ELIONA / CERTEL, type: WR100.125.190 -in good condition- - For frames max. 1,000 x 1,250 x 1,900 mm - Boxes max. 600 x 400 x H 360 mm - Steam, hot water - Heating type: electric - El. Connection: 3x 400 V + N + PE, 50 kW Visits and test runs are possible by arrangement.

Process Vessels Stainless Steel Mixer/Melting Tank Manufacturer: Dibir Group Srl Capacity approx. 120 litres Electrically heated, thermal oil Frequency-controlled agitator Temperature control

plate thickness: 4 mm plate length: 200 mm total power requirement: 3 kW weight of the machine ca.: 550 kg dimensions of the machine ca.: 1,0 x 0,8 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling a drying chamber - dryer, German manufacturer INNOTECH, type HT 4D. Year of manufacture 2007, fully functional. + 2 trolley, sieves. Make me offer !

Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement.

A CNC production turning machine is offered. Working area bar capacity: 65mm, max. turning length: approx. 150mm, tool turret: 14 stations, control: C200. Equipped with automatic bar feeder magazine (type MBF), chip conveyor with integrated coolant cleaning system, compressed air connection, hydraulic chuck, signal light. Weight: approx. 5500kg, overall dimensions X/Y/Z: approx. 8500mm/2100mm/2200mm (incl. loading magazine). Inspection possible by arrangement.

A cam-controlled automatic lathe is offered. Working area bar capacity: 60mm, turret: 6 stations (axial), cross slides: 4 (radial), control: mechanical cam control. Equipped with bar guiding device, foldable safety cover, integrated coolant system, chip tray, various tool holders. Weight: approx. 2350kg, overall dimensions X/Y/Z: approx. 2100mm/1250mm/1750mm (dimensions without bar guide). Inspection possible by arrangement.

A tool milling machine is offered. Travel range X/Y: approx. 400mm/200mm, spindle speed: 224-2240rpm (6 steps), feeds: 0.10-0.71mm/rev, tool holder: MT/SK, control: manual. Equipped with vertical milling head, adjustable compound table, mechanical handwheels. Inspection possible by arrangement.

Dough divider and rounder König Industrie Rex I 6 Condition: cleaned and tested Incl. dough funnel with lubrication, laterally movable with ladder Weight range: 30-100 g Max. hourly output: 18,000 pieces Siemens touch control with program memory Incl. 1 chamber drum Incl. 1 set for 4-row production, 1 set for 6-row production

Continuously adjustable dosing volume: 60-1050ml, length: 1750mm, width: 650mm, height: 1700mm. Equipment: mounted on a stainless steel frame, mobile with four swivel castors, manual feeding and removal of bottles, self-priming, with a dipping device for the filling tube, automatic circulation cleaning, homogenizing and refining of curd possible, usable products: liquid, pasty, cold and hot milk, yogurt, curd, cream cheese, fondue, honey, salad dressings, mayonnaise, jam, cake batter etc. An on-site inspection is possible, not under power.

Offer 26138 Technical data: - 90° cutting head pneumatically operated - Cutting thickness - normal steel up to 2 mm - Stainless steel up to 1.5 mm - Aluminium up to 3 - Blade length 130 mm - Table size W 600 x D 380 mm - Working height 940 mm - Footswitch - Compressed air requirement 6 - 8 bar - Space requirement approx. W 600 x H 1250 x D 850 mm - Weight approx. 180 kg

Counter: 71 Mil. clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm

Control Heidenhain ... TNC 430 Clamping table surface... 800 x 400mm Axis X ... 500mm Axis Y ... 400mm Axis Z ... 400mm ISO 40 Spindle speed ... 0-4000 rpm. Max. workpiece weight ... 300kg L x W x H ... 2800x2700x1980mm Machine weight ... 2600kg Main engine power ... 5.5kW The machine is in good condition.

Specifications Brand: Ingersoll Rand Type: 2339531 Kind: Compressor with Refrigerated Dryer Year of construction: 2011 Operating hours/meters: 6107 Weight: 188 + 27 kg Assets: 3 kW/ 4 HP Air pressure: 14 bar Electrical connection: 400/ 230V, Photos/video available: Photos available 10.2.197

Specifications Brand: Ingersoll Rand Type: 2339531 Kind: Compressor with Refrigerated Dryer Year of construction: 2011 Operating hours/meters: 6107 Weight: 188 + 27 kg Assets: 3 kW/ 4 HP Air pressure: 14 bar Electrical connection: 400/ 230V, Photos/video available: Photos available 10.1.197

General SKU255X227 MakeComi-Condor LocationBarneveld TypeH.T. 600 GMR Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Motor22 KW Inlet diameter75 mm Specified Features - Pusher centrifuge Basket centrifugecheck Capacity52 l Basket sizesDia. 600 mm Max. loading weight65 kg Motor22 kW, 380 v Max. basket speed2000 rpm Max. temperature100°C Pusher centrifuges Pusher centrifugecheck Basket diameter600 mm Max. loading weight65 kg Motor14 kW, 380 V, 150 rpm, (Ex) Max. basket speed2000 rpm Mechanical operated pushercheck Motor2,2 kW, 380 V., 950 rpm, (Ex) MaterialStainless steel 1.4404 (316L) General No.0878 Year of construction1993 Mounted on framecheck With switchgear(as is) Floorspace1,30x3,60 m Total height2,70 m Weight4000 kg Extra SpecificationsCake volume 52 dm3, slurry density 1,25 kg/dm3,filter surface 0,45 m2Powdered foodsGen ...

General SKU232M159 MakeTop Industrie F-77 013 Vaux Le Penil Type1876 0000 Reactor cristallisation CO2 No.1449 Year of construction2007 Mounted on legs, in framework Pressure Working pressure350 Bar Main Features MaterialStainless steel Volume0.1 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity0,094 Ltr Vessel sizesdia. 114x145mm With jacketcheck Max. temperature150°C Motor0,25 KW, 400 Volt With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) General LocationBarneveld With switchgear(as is) Floorspace1,0x0,6M Total height1,0M Weight130 KGPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberAgrochemicalsPlastic & polymersCatalysts & fillersStainless Steel ReactorsOrganicsSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid pharmaceuticsDyes & pigmentsA ...

General SKU022A121 LocationBarneveld MakeBran + Luebbe TypeCentrisol MC-50 No.9190756 Main Features MaterialStainless steel Motor7.5 KW Rotor160 mm Specified Features - Inline mixer Continuous reactor(1x) Rotor sizesdia. 160mm, Mixing chamber dia. 200mm Inletdia. 50mm Capacitymax. 500 Ltr/Hr Motor7,5 KW, 400/690 Volt Rotor speed2915 Rpm Electric heating(330 Watt, 220 Volt, Max. 200 Degr. C.) MaterialStainless steel 1.4552 General Year of constructionunknown Mounted on framecheck Floorspace0,6 x 0,4 m Total height1,5 m Weight150 kg Technical specs Extra informationmixing chamber dia. 200 mmOils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDiscountInline high shear mixersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsBran + LuebbeIndustri ...

General SKU040Z169 LocationBarneveld CEcheck MakeHaagen &: Rinau / Unimix TypeSH-500 Main Features MaterialStainless steel Motor22 KW Rotor150 mm Specified Features - Inline mixer Continuous reactor:In-line homogeniser: Rotor sizesø 150 x 150 mm Inlet100 mm Outlet75 mm Number of stages:3 Capacitymax. 36 m³/h With mechanical sealcheck Motor22,0 kW, 400 Volt With frequency controllercheck Rotor speed2900 rpm MaterialStainless steel 1.4306 (304L) General No.301166/2 Year of construction2002 With switchgear(as is) Floorspace0,8 x 0,5 m Total height0,5 m Weight300 kg Extra Specifications- mirror polished rotor and stator- stator with mechanical sealOils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDiscountInline high shear mixersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal f ...

General SKU040Z166 LocationBarneveld MakeKinematica AG CH-6014 Littau TypeMegatron MT 1-90 MF No.M-90123 Main Features MaterialStainless steel Motor7.5 KW Rotor80 mm Specified Features - Inline mixer Continuous reactor:Inline dispersing processor: Rotor sizesø 80 mm, Stator ø 90 mm Inletø 50 mm Outletø 50mm Number of stages:1 With mechanical sealcheck Motor7,5 kW (400V, 2950 rpm (Ex)) With frequency controllercheck Rotor speed6000 rpm MaterialStainless steel 1.4571 (316Ti) General Year of constructionunknown Mounted on framecheck With switchgear(as is) Floorspace0,8 x 0,8 m Total height1,5 m Weight360 kg ATEX designedcheckOils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDiscountInline high shear mixersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBever ...

An Inotec spindle press for rolling and forming sheet metal bodies of various sizes is available. Safety distance: 350mm, max. product diameter: 350mm, control system: PLC, weight: approx. 1800kg. Including pressure plate magazine and various tool sets. Documentation available. An on-site inspection is possible.

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 22 kW - 400 V - 50 Hz - 2.950 rpm - 38,8 A. P(inlet): 1.013 hPa. P(outlet): 800 hPa. PS: 820 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 372 cfm. Sound level: 89 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

General SKU362W1148 LocationBarneveld Main Features Motor1.1 KW Length3500 mm Inlet diameter150 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Diameter150 mm Length3500 mm Between inlet and outlet2300 mm Shaft diameter55 mm Pitch90 mm InletDia. 150 mm Outlet200x180 mm Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed64 rpm With coverscheck MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) With jacketcheck General MakeUnknown Year of constructionunknown Floorspace4,30x0,70 m Total height0,50 m Weight200 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & m ...

General SKU232U228 LocationBarneveld Main Features Motor0.37 KW Length4500 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter350 mm Length4500 mm Between inlet and outlet4400 mm Shaft diameter130 mm Pitch93 - 300 mm Inlet160x350 mm Outlet350x280 mm Motor0,37 kW 220-240/380-415 Volt Screw speed9,2 rpm Outlet height1430 mm Height between in- and outlet1030 mm MaterialStainless steel 1.4301 (304) With jacketcheck General Makeunknown: missing type plate Floorspace5,2x1,1 m Total height1,9 m Weight550 kg Extra SpecificationsCapacity: 4256 Ltr/hOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Ot ...

7 pieces telescopic belt conveyor, MAXX REACH, 27m total length - used - : Price per piece ex location: only 18.950.-€ (net), incl. loading! Price when buying 3 pieces: only 16.950.-€ / piece (net) ex location! Price for complete acceptance: only 15.950.-€ / piece (net) ex location! Manufacturer: FMH CONVEYORS INT. LTD. Model: MAXX REACH Type: MR3185-800 Year of Make: 2019 Serial number: e.g. W190103-02-03 According to the manufacturer, up to approx. 27m total length extended Length retracted: 8.80m I.e. the device extends about 18m! Body width: approx. 1.20m Total width approx. 1.53m plus motor on the side approx. 20cm 3-fold telescope Ideal for unloading trailers – the device can then also be located about 5 – 6m away from the unloading gate, i.e. a forklift can still drive in front of it when retracted, etc.! Height: approx. 1.22m Total weight: 6. ...

General SKU322S570 MakeQVF Glastechnik GmbH (D) LocationBarneveld TypeWashing, dissolving, filtering, precipitating and recovering installation Pressure Working pressure0.3 Bar Vacuum possiblecheck Main Features MaterialGlass Motor0.37 KW Specified Features - Glass-lined Reactor Capacity120 ltr (4x), 110 ltr. (1x) Vessel sizesdia. 595x480m (4x), dia. 400x750mm (1x) Max. temperature20 degr. C With propellor stirrer0,37 kW 230/400 Volt 175-775 rpm With paddle stirrercheck Motor0,25 kW 230/400 Volt Speed mixing shaft110-630 rpm With jacketcheck Glass Reactors MaterialGlass General No.155153/2214 Year of construction1995 Mounted on legsframe With switchgearas is Floorspace4,6x2,0 M Total height2,3 M Weight1800 Kg Extra SpecificationsQVF Glasstechnik Washing, dissolving, filtering, precipitating, and recovering installationThe entire installation is built in a t ...

The Mariani INOX handle applicator was developed for the automatic application of carrying handles to beverage multipacks or bottle containers. The machine works inline within the production line, ensuring precise and reliable handle positioning at high production speeds. Manufacturer: Mariani Model INOX Handle Applicator Year 2005 Condition Used Stock number 103823 Type PLC 6ES7 214 SIEMENS Voltage: 400V Frequency 50 Hz

Equipment: Overpressure, Vacuum,Manufacturer: Industrietechnik Ambs,Condition: used,Volume: 50,950,Vacuum: 1.0,Max. overpressure: 3.0,Max. permissible Operating temperature : 200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,600,Cylindrical height: 4,100,Total height: 6,000,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Outlet: flange,Outlet : 100,Remarks: Steel feet cut off below the mounting flange (see pictures),Last purpose: Chemical,Material in contact with the product: V4A 1.4571 (AISI316),Material feet: Steel,Bottom bearing:

Manufacturer: Industrieanlagentechnik Frauental GmbH,Condition: used,Other: 1 connection bent (see photos) Weight: 1400 KG,Technical documents: drawing, acceptance certificate,Exchange surface: 13.8,last purpose: vapour water,nameplate: Yes,Volume sheath space: 1.400,Material jacket: AISI316 (V4A) 1.4571,Max. permissible Operating overpressure jacket chamber: 0.5,Max. permissible Operating vacuum jacket space: 1.0,Max. permissible Operating temperature sheath chamber: 200,Volume pipe space: 400,Material pipes: AISI316 (V4A) 1.4571,Max. permissible Operating temperature raw space: 100,Max. max. Operating overpressure

Horizontal Pouch Packing Machine, Type: APH - Automatic filling and sealing of loaves into bags - Automatic bag feeding system - Infeed and outfeed belts - INPAK Thermoforming Unit - Central oil lubrication for continuous operation - Touch display - Incl. clipping machine Capacity: max. 50 pcs./minute Product dimensions: max. 50 cm length / 20 cm width / 14 cm height The machine is in neat condition and is ready for immediate use. Viewing possible.

General SKU222M099 Makeunknown (manufacturer tag is missing) Year of constructionunknown LocationBarneveld Main Features Motor4 KW Length2900 mm Inlet diameter340 mm Specified Features - Vertical screw conveyor Vertical conveyor screw:Conveying with metering screw: Tube-modelcheck Diameterscrew 1= dia. 340mm, screw 2= dia. 150mm Lengthscrew 1= 2900mm, screw 2= 1350mm Between inlet and outlet± 2200mm Shaft diameterscrew 1= 90 mm, screw 2= 40 mm Pitchscrew 1= 190 mm, screw 2=135 mm Inletdia. 210mm Outletdia. 320mm Motor4,0 kW, 220/380 V + 0,75 kW, 400 V Outlet height530 mm Conveying height600 mm MaterialStainless steel 1.4301 (304) General Floorspace4,0x0,5 m Total height1,6 m Weight480 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlas ...

INDUMASCH SIEGEN Notching Machine Table dimensions: 1000 x 800 mm Dimensions: LxWxH 1.2x1.1x1.4 meters / Weight 500Kg

General SKU051G200 MakeWerkhuizen Schepens N.V. Dendermonde TypeMixing drum No.70-776-397 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor11 KW Inlet diameter1200 mm Specified Features - Miscellaneous mixer Coating installation:Continuous drum coater: (1x) Pan diameter1200mm Cylindrical width6000mm, Adjustable inclination In-/OutletInlet 340x340mm, Outlet 400x600mm Motor11,0 kW, 380-415/660-720 Volt With spraying arm(nozzles are not included) Miscellaneous mixers MaterialStainless steel 1.4306 (304L) General LocationBarneveld With switchgear(as is) Floorspace9,0x2,6 m Total height2,1 m Weight8500 kg Extra SpecificationsMixing drum. non perforatedwith spray bar armOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgroch ...

This 3-axis Euromac ZX INDEX was manufactured in 2004. It features a maximum punching force of 300 kN and a working area of 1250 mm in the X-axis and 1000 mm in the Y-axis. The machine is capable of processing steel up to 7 mm thick. If you are looking to get high-quality punching capabilities, consider the Euromac ZX INDEX cnc punching machine we have for sale. Contact us for further details.

Glass Bottle Filling and Capping Monoblock KHS Innofill 32000 bph The KHS Innofill DRS-ZMS is a 80 filling valve, fully automatic rotary glass bottle filling and capping monoblock designed for the bottling of beer, carbonated soft drinks and other beverages in glass bottles. The filler was manufactured in 1997 and refurbished in 2023 with new Simens Simatic S7 series control system. The filler is a counter-pressure filler and it has two capping units integrated in one monoblock triblock. Both cappers has 15 capping heads, crown capper for glass bottles and screw capper for PET bottles, providing flexibility on production using the same production line. The KHS Innofill DRS-ZMS is a fully automatic electronic pressure filling system designed for hygienic filling of carbonated beverages. Product, gas and CIP media are supplied through hygienic, deposit-free sealing systems to ensu ...

This 3-axis INANMAK MEKOR PL-YPe 3100 was manufactured in 2019. It features a working area of 3,000 × 12,000 mm and is equipped with a Hypertherm HPR400XD High Definition plasma source. The machine includes a 3D bevel cutting head and operates at a maximum positioning speed of 20 m/min. If you are looking to get high-quality plasma cutting capabilities, consider the INANMAK MEKOR PL-YPe 3100 machine we have for sale. Contact us for further details.

diameter range 4-8 mm shaft length under head 40-110 mm output pieces/min 600

This 3-axis OMAL Insert 1300 was manufactured in 2007. It features a working length of 1,300 mm, a horizontal drilling spindle, and an integrated glue and dowel insertion system. The machine is equipped with a ball screw on the X-axis allowing speeds up to 50 m/min and a PC-based CNC control system. If you are looking to get high-quality woodworking capabilities, consider the OMAL Insert 1300 machine we have for sale. Contact us for more information.

diameter range 1,7-6,4 mm shaft length under head 4,5-75 mm output pieces/min 1000

This 3-axis SEI Laser INFINITY 5070 V300 was manufactured in 2022. It features a working area size of 500 x 700 mm and a Z-axis guide of 650 mm. The machine is designed to support materials with a maximum weight of 40 kg/m². If you are looking to get high-quality laser cutting capabilities, consider the SEI Laser INFINITY 5070 V300 CO2 laser cutting machine we have for sale. Contact us for further details.