bag in box used for sale

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

⦁ Station No. 1 Charger for cardboard packaging with packaging remover from the charger ⦁ Station No. 2 Box former ⦁ Station No. 3 Station for inserting products ⦁ Station No. 4 System of closing boxes with sticky hot glue ⦁ Station No. 5 Closing the box ⦁ Station No. 6 Exit conveyor -The system of closing the box with hot glue is carried out using the device of the Italian manufacturer "Preo".

Model: UTAH Year of manufacture: 2013 Cooling capacity: 14,4 kW Dimensions: 1305 x 700 x 345 mm Weight: 66 kg.

Inv. Num. : 6943 Type: WIR/G BOX Producer: Summa Created: 2007 Parameters: Machine weight: 2850 kg In good technical condition.

Horizontal cartoner, packaging machine -Manufacturer: nomatech, conveyor belt from packaging machine/cartoner BOX 60H -Type: BOX 60H -Band width: 230 mm -Shipping/Price: complete -Dimensions: 3330/600/H730 mm -Weight: 264 kg

MAN Gas Generator in Box Manufacturer : MAN Rated Output Power : 350 KVA Speed :1500 RPM Voltage : 400 V Frequency : 50 Hz Condition : Used Fuel : Gas Cylinder : 12 Cylinder Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd 00447956518924

Serialization line for printing folding boxes of medicines Find more here - / Contact us at -

Description n°4 thermoregulation zones temp max 90°C power 4,5 kw

A continuous servo side sealing machine IFP for the food industry is available. Packaging capacity: 100 packages/min, max. sealing dimensions: 650mm, max. sealing length: unlimited, film material: PP/POF/PVC, max. film reel width: 800mm, max. film reel diameter: 350mm, working height range: 870mm-930mm, output: 9kW, machine dimensions X/Y/Z: approx. 1800mm/2650mm/1500mm, control: Siemens. Documentation available. On-site inspection is possible.

0: 17 m width of the strips: 800 mm weight: 7000 kg connected load: . kW dimensions: . m Box Filler 1000-65-3 Telescopic Belt Bijlsma Also available individually The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lunch Box, Hamburger Box. Food Box Gluing Machine The machine was only adjusted and tested Can be demonstrated on site

Range of machines Manufacturer: OMSO Machine designation DM 385/6 BOX Year of Make: 2000 Operating hours approx. 31.950 Number of Printing Stations 6 Number of inking units 6 Number of Ground Pressure Stations 2 Number of ground printing inking units 2

Year of construction 2021 Good condition

sheet width: 1050 mm plate thickness: 1.0 mm daylight opening: 95.0 mm angle adjustable from - to: 0 - 150 Grad total power requirement: manuell weight of the machine ca.: 180 kg range L-W-H: 1320 x 790 x 1050 mm characteristics - Universally applicable bending machines for plumbing and repair shops - Simple pivoting movement of the bending beam using a bow handle - Easy adjustment of the upper beam for efficient work - High upper beam for producing high-edged profiles - The piano inserts in the upper, lower and bending beam result in a large number of bending options - Cassettes and special profiles with opposite bends are with these Models easily feasible Scope of delivery : - Segmented upper, lower and bending beam - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 2 x 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DOMA-T Cheese Slicer KT 3 BOX Knife for 4 parts Machine for wheels with a diameter of up to 42cm Loaves are pushed upwards by the knife and pieces can then be easily removed from the machine surface Two-handed operation Machine must be thoroughly cleaned before use Video about test run available

Complete used NH3 (Ammonia) freezer installation for freezing carton boxes. This set includes a Grasso RC 6311 two-stage reciprocating compressor. The freezer has the following capacities: - Capacity 15T/24H at -24° C - Carton box weight 12-15 kg/each - Capacity 2.000 box/24h - In/output 80/90 box an hour Please feel free to contact us for more information!

Aircooled chiller/heat pump Blue Box Epsilon Echos 16kW/18kW Cooling capacity: 16 kW (12/7 — 35°C) Heating capacity: 18 kW (40/45 — 7°C) Year of manufacture: 2017 Options: heat pump Heat exchanger: plate Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Siam ( scroll, inverter) Type of refrigerant: R410A Number of fans: 2 pcs. Dimensions: 1.10 x 0.70 x 1.40 m Weight: 227 kg Working hours: 268 h Condition: excellent, new

Aircooled Chiller/Heat pump Blue Box Epsilon Echos DK RF HP 26 kW Cooling capacity: 26 kW (12/7 — 35°C) Heating capacity: 30 kW (40/45 — 7°C) Year of manufacture: 2018 Options: Heat pump Heat exchanger: Plate Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 1 pcs. Copeland (scroll) Number of fans: 1 pcs. high-pressure Dimensions: 1.30 x 1.15 x 1.60 m Weight: 358 kg Working hours: 3 h Condition: Excellent, new

General SKU050G197 LocationBarneveld MakeMachinefabriek Heesen N.V. Boxtel TypeMonoroll Main Features Motor5.5 KW Inlet diameter175 mm Width40 mm Specified Features - Roll compactor Granulatorcheck Roll sizesø 130 mm Ring dieø 175 x 40 mm Number of dies available:1 Die perforationø 4 mm Number of press rolls1 (500 rpm) Motor5,5 kW(380 V, 1440 rpm) Inletø 150mm Outlet175 x 175mm Information Year of constructionunknown Mounted on wheelscheck Floorspace1,3 x 0,6 m Total height1,4 m Weight450 kg Extra SpecificationsWith stainless steel ring dieRoll compactorsHeesen BoxtelCompactors > Roll compactorsBrand > Heesen Boxtel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

Used Used Feed Boxes Bortolin-Kemo: Year: 2004 Condition: Good Used Feed Boxes Bortolin-Kemo: Model: feed boxes Year: 2004 Speed: 15.000 b/h Safety protection Code: G 36 More details: https://bottlingscout.com

Conrad Boxer 200 drilling rig , Pull-up 4000 daN / kg, Pull-down 2000 daN / kg, Winch//Witch 1450 daN / kg, Year of manufacture 2007, Weight 12,500 kg, Stroke 430 cm, This Conrad Boxer is equipped with:, Caterpillar track , - Caterpillar length center to center : 2600 mm., - Caterpillar width : 400 mm., Brevini EGO200LS winch with 50 meters / Ø10 mm., Soundings winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head , , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed 80 rpm, , Hydraulically operated changeover clock, suitable for 3 1/2 drill pipes., Spool head suspension with weight compensation, Hydraulically operated catch clamp, Hydraulic tank 480 liters, Hydraulically driven spray pump, Drill pipe manipulator, Drill pipe storage rack incl. 74 pcs. 3-meter 3-1/2-inch drill pipes (222 mete ...

An air-cooled monoblock water chiller Green Box for the plastics industry is available. Cooling capacity: approx. 20 injection molding machines, power: 25kW, refrigerant circuits: 2, refrigerant: R407C, cooling capacity: approx. 80kW, air flow rate: approx. 16500m³/h. Machine dimensions X/Y/Z: approx. 3300mm/1100mm/2100mm, weight: approx. 1300kg. Documentation available. An on-site inspection is possible.

Cartoner Manufacturer: TGM Type Box 90 Including package inserts Technical data: Dimensions of the machine BOX 90 Width 2781 mm Depth 1427 mm Height 1970 mm Dimensions of the boxes Width 20 - 100 mm Height 15 - 100 mm Depth 60 - 120 Minimum machine speed 1000 pieces/h Max. 5000 pieces/h Machine weight 1000 kg

Conrad drill rig Spoeldrillmachine, suitable for Geothermal drilling., - Machine is from year of construction 2016, - Hours 5,985, - Maintenance carried out by manufacturer, - Fully documented, - Powered by IVECO N45 ENT, 4 cylinder diesel, - Manipulator present, - Remote controllable by means of remote control, - Pull up: 4000 daN, - Pull down 2000 daN, - 4 drill head, bore 100mm, Present at the machine: 40 drill pipes, each 3 meters long (120 meters total) , , Very neat and well-functioning machine, immediately ready for use!, , = More information =, , Type of fuel: Diesel, Year of manufacture: Dec 2016, Model year: 2016, Colour: Blue, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interest ...

Conveyor belt, belt conveyor, transport belt, belt conveyor, chain conveyor, pallet conveyor, pallet conveyor for horizontal cartoner, packaging machine -Handover: in its current condition as inspected -Control/Drive/Cover: missing -Manufacturer: nomatech, Horizontal Cartoning Machine -Type: BOX 60H -Submission/Price: complete -Dimensions: 3100/1500/H1640 mm -Weight: 608 kg

General SKUR0162 MakeAZO Liquids GmbH (D) LocationBarneveld TypeContinous Powder Mixing Main Features MaterialStainless steel Motor12 KW Specified Features - Inline mixer MaterialStainless steel Information No.111182-01 Year of construction2015 Floor space3,3x1,5 M Total height2,8 M Weight1900 Kg Extra SpecificationsIncluded 1 X Blender type PMXR material Stainless steel, motor 2,2 kW, with seal barrier system brand Aerni type AFR 168 ZS 8L max pressure 23 bar with liquid circulation pump 0,18 kW 1 x 520 ltr. tank brand Urban type wasserbehalter serial number 15.1606 pressureless, conical bottom, flat top. single-walled, uninsulated, on legs. 1 x Schenk Process powder funnel MechaTron type GRLS 27.070.000.0083 serial number V093547.A01 built in 2015 with a vibrating chute underneath. 1 x ITT Borneman screw spindle pump type SLH-4G-2033 working pressure 4 bar 5.5 kW. 1 x  ...

Manufacturer: PFM Type: Zenith Inox Year: 2002 Capacity: ~50 pcs/min Electrical power: 4.5 kW Weight: 680 kg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional

This is a side seam wicket bag machine Lemo Intermat 850 STN-CP Knoter, production type: wicket bags for bread, chicken, diapers, toilet paper, hygiene products and other types of wicket bags, number of lanes: single lane / lane wicket, processable materials: LDPE, HDPE, PP and recycled extracts, sealing width (bag length): 120-450mm, draw length (bag width): 200-850mm, gripper arm length: 600mm, max. linear speed: 65m/min, output capacity: 140 knot bags/min, max. number of bags per stack: 250, drive system: PLC-controlled, operator interface (terminal), print mark control, servo motor drive, nip feed rollers, sealing bars. Attachments and accessories: bottom gusset (only bottom gusset included), handle unit, longitudinal sealer, pre-sealer, angle sealer, cross sealer, handle punch, photo cell for printed film, automatic one-step conveyor (index conveyor), handle hole punch, G-gusset uni ...

A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible.

Industrial Container Box 650 liters New goods, large crates, stacking containers, large containers, see pictures L 120 x W 100 x H 78 cm 650 liters volume Net weight 43 kg Colour grey Up to 4000 kg load capacity in stack (at 5° room temperature) 2 runners, also suitable for shelf storage Also closed version available. Liquid-tight, drain valve possible 200 pcs available Negotiation price: € 145,-- net per piece ex stock Larger quantities on request! Goods are in stock. Transport available on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly lo ...

Hello sell grow boxes from the company Infarm The boxes are new in original packaging Mass High 2.00 m Width 2.00 m Depth 0.90 m Please visit first If you have any questions, write an e-mail approx. 44 pieces available

Offer 3x Ignition Box MIC950 for sale. Also to be handed in individually.

Ship propeller, brass gland, brass gland, bronze gland, ship accessories -Stuffing box: Material bronze / steel -Inner part: material bronze -Diameter: outer Ø 855 mm / inner Ø 800 mm, thread pitch 10 mm see photos -Total dimensions: Ø 974 x 293 mm, weight 209 kg -Outer part: steel casing Ø 915/847 mm -Total dimensions: Ø 975 x 385 mm, weight 369 kg -Thread: pitch 10 mm, see photos -Transport dimension: ca.1200/1000/H1020 mm -Total weight: approx. 620 kg

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Properties < b >: < / b > Roll length: 430 mm Axle length: 470 mm Roll diameter: 50 mm Shaft diameter: 8 mm Material: Steel, galvanised 6-kant: approx. 11 x 11 mm Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to. Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects. Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer y ...

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

The industrial inkjet printer EBS Ink-Jet EBS-230 was produced in 2014. The printer allows for contactless description of various objects that move, for example, on the frame of the fiber laser or on the production conveyor, etc. It is a large-scale printer (6-116 mm, DOD technology). The printer guarantees a legible and durable print on paper, cardboard, plastics (also so-called porous), on fabrics, leather and imitation leather, wood and wood-like products, on ceramic products (also so-called porous), as well as on various types of surfaces metal, etc. An industrial printer of this type is a so-called adapter for another device. It is mounted, for example, at a laser head or an industrial plotter, which cuts elements, while the printer immediately marks them. Technical specifications : - the height of the prints: 6-12.8 with a 7D head (the height of the letter is adjusted by twisti ...

Choice of 2 x Francis Shaw K7 MK3 intermix, Total Volume: 320L, Useful volume 210L, Order number: 6061/1 and 6061/2, Year of manufacture: Oct 1986, NR2 Rotors, SSA type dust seals, Hydraulic drop door with linear actuator, Pneumatic hopper, Zamech full unidrive gearbox, Type: WD263-22.5, ratio 22.5:1. with 1000kW, 990rpm, 6000V motor. Rotor speed 44rpm. With modern starter panel, but without operator controls.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

Packing press 180P2 Inox with hydraulic lifting and vertical device Nominal power up to 1200 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2250 mm Width 840 mm He 1880 mm Maximum acceptance 1380 mm Weight 1020 kg Material 1.4301 / AISI 304 Press force 50 to Press pressure 270 - 320 bar Juice yield up to 75% Connection for juice drain 1 1/4 High juice drain 420 mm Scope 22 Pressing tummy 100x100cm + 24 press inserts Stainless steel 65x65cm ; New machine - best condition

QTY 1: New Bainite make 95 litre intermeshing type mixer Model: BMIM95 Intermeshing mixer with hydraulic hopper Net chamber volume: 95 litre Rotor speed: 6 – 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement), Motor power: Siemens 420kW, 1000rpm AC squirrel cage motor with Siemens G150 VFD, Discharge door: Hydraulic drop door type with linear actuator and toggle latch mechanism, Feed Hopper Assembly: Hydraulically operated, Floating weight: single ‘V’ bottom type, Gearbox: Elecon Full unidrive type with S.F. 2.25. Bedplate: Fabricated steel, Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Electrical Controls:  Siemens G150 variable frequency drive controls. Operator control panel with Siemens PLC and HMI.