bag in box used for sale

General SKU292X391 MakeNetzsch TypePSI Mix No.2401393 Year of construction2005 LocationBarneveld Main Features MaterialStainless steel Volume15000 Ltr. Motor45 KW Specified Features - Inline mixer Mixercheck CapacityUp to 5 m³/h Inline high shear mixers MaterialStainless steel 1.4829, Stainless steel 1.4301 (304) General Floor space1,90x1,60 m Total height2,20 m Weight2500 kg CEcheck ATEX designedcheck Extra SpecificationsWith rotation valve, 29 rpm, Bartec control, type BAT 300, (Ex),&:nbsp:Burgmann refill unit, type spn2063,in and output: DN80control cabinet (as is)Oils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesInline high shear mixersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsNetzschIndustries > Food & Feed > Oils & fatIndustries ...

Cooking Unit: Stainless Steel Berner with Induction Stove 269x70x70 cm for Pedestal Mounting Cooking block with left 2 sliding doors and 3 drawers each 30x50x10 cm, sliding door cabinet 121x60x36 cm, in the middle induction stove 4 plates, hob size 65×56 cm, with pot detection, 400 V, 14 kW, 20 A, direct connection, storage compartment at the bottom 71x70x33 cm additionally 2 sockets with 230 V, right 3 drawers each 30x50x10 cm, high-quality gastro fitting, for base mounting, feet optionally available, also freely available in the room, Original price approx. 18000,00 €

Manufacturer: INDEX Model: MS42C Year of Manufacture: 1998 ( Machine 1 ) 2002 (machine2 ) Machine 1 : Power supply: 3-phase / 50 Hz Rated voltage: 400 V Control voltage: 24 V Rated current: 125 A Rated power: 69 kW Electrical cabinet weight: 1500 kg Machine weight: 11000 kg Machine 2 : Power supply: 3-phase / 50 Hz Rated voltage: 400 V Control voltage: 24 V Rated current: 100 A Rated power: 72 kW Electrical cabinet weight: 1500 kg Machine weight: 11000 kg Working area Maximum bar diameter (bar feed, external): 42 mm Bar feed positions: spindle positions no. 1, 3, 4, 6 Spindle circle diameter: 320 mm Main spindle (turning spindle) Clamping system: Power clamping with INDEX spring-loaded hollow clamping cylinder and draw tube Maximum clamping stroke: 4 mm Clamping force: 26 kN Drives Main spindle drive (per spindle): Motor type: Variable-speed hollow-shaf ...

Used deck oven WACHTEL, type: Infra -In bakery condition- - 5 stoves of 1.8 x 0.8 m each - 8m² baking surface - Digital control - Complete in one piece (not disassembled) - Assembly on request - Condition: good, ready for immediate use - Technically everything tested and cleaned The oven is in good condition and is ready for immediate use. On request, we can set up the stove on site. A complete overhaul is of course also possible.

Travel X/Y/Z: 450mm/310mm/300mm, table dimensions X/Y: 840mm/320mm, tool stations: 12, tool holder: SK40, speed: 4000rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2200mm, weight: approx. 2500kg, control: Heidenhain TNC 155. On site inspection is possible.

General SKU252X210 MakeBBA Innova TypeCCCL-16/40 No.V-110 Year of construction2001 LocationBarneveld Main Features MaterialStainless steel Specified Features - Roll dryer Roll dryercheck Roll coolercheck Double rollcheck Roll sizesDia. 130x400 mm Feeding with pouring gapcheck Motor230 volt With variable speed drivecheck General With switchgearcheck Floorspace0,90x0,80 m Total height1,00 m Weight367 kg CEcheck Extra SpecificationsCompact Conti CoolerPowdered foodsStarchBiotechnologyFeed additivesCosmeticsFood additivesSugarDairyDyes & pigmentsAPIRoll dryersBBA InnovaIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > DairyIndustries > C ...

This 3-axis Makino EDNC 43T was manufactured in 2006. It includes an EROWA loading robot with 120 pots, ensuring efficient die-sinking EDM operations. Consider the opportunity to buy this Makino EDNC 43T die-sinking EDM machine. Contact us for more information.

A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment.

Set of 70 bearing housings and roller bearings, SKF, SNR, INA… , mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An exceptional special price of € 6 per item, excluding VAT. The original price is at least 10 to 15 times higher. We can divide the bearings into 3 groups: 1) Approx. 44 pieces in original cardboard packaging 2) Approx. 15 pieces in original foil packaging 3) Approx. 11 pieces open, unused, fully functional bearings. See stock list on photo. Minor defects of 1-2% possible. These are brand-name products only. Due to the extremely low package price, we cannot offer any guarantee/warranty in this case. For these goods, we must exclude the buyer's war ...

Lot of approx. 265 small roller bearings, SKF, FAG, INA, , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An absolute special price of € 0.7/piece excluding VAT. The total original price is at least 7 to 10 times higher. We can divide the bearings into 3 groups: 1) Approx. 225 pieces in cardboard or foil original packaging, including one item with 50 pieces (various SKF items such as minimal bearings, seal sets, etc.). Many bearings are from a large package where the individual bearings are not packaged. 2) Approx. 40 open, unused, fully functional bearing units. See bearing list on photo. Minor erro ...

A Pulsotronic metal detector for liquid and pasty products in pipeline systems is available. Pipe diameter: 100mm, max. operating pressure: 10bar, max. operating temperature: 80°C, version: EX. Machine dimensions X/Y/Z: 1250mm/550mm/700mm, weight: approx. 50kg. On site inspection is possible.

Height=1.63 m, Overall length= 0.96 m, Overall width= 1.06 m, Net weight= 329 kg,

This 5-axis Mazak INTEGREX I-150 turn-mill centre was manufactured in 2012. Consider the opportunity to buy this Mazak INTEGREX I-150 turn-mill centre. Contact us for more information.

This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information.

This 5-axis Mazak Integrex 400Y was manufactured in 2000. Ideal for complex machining, this turn-mill centre machine integrates multiple operations. Consider the opportunity to buy this Mazak Integrex 400Y Turn-Mill Centre machine. Contact us for more information.

This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6 hydraulic chuck, 4,000 rpm max speed, and 30 kW power. The second spindle matches these capabilities. Its milling spindle can reach up to 20,000 rpm. Includes a high-speed ATC with a 20-tool capacity, expandable to 120. Ideal for single-setup machining with its heavy-duty construction and MAZATROL MATRIX CNC control. Contact us for more information about this machine.

This MAZAK INTEGREX 200 IV S Lathe was manufactured in the year 2007. It is equipped with a Matrix control unit. The machines disposes od a spindle, a counter spindle, a milling spindle and a chip conveyor.

This Index G200C horizontal turning machine was manufactured in 2001. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this Index G200C horizontal turning machine. Contact us for more information.

This INDEX C-42 Speed Line Lathe was manufactured in 2004. This machine was initially connected in 2005 and is equipped with a Siemens 840 control system. It comes with IRCO short bar feeder for efficient material handling for enhanced productivity. In total is has 5 axes including Z, X, C, B, and Y. Thus it offers unparalleled versatility in machining operations. With 3 tool turrets and VDI 25 holders it enables precise and swift tool changes to meet diverse manufacturing requirements. Despite its currently non-operational status, it remains in exceptional condition, having been in production until November 2023. Contact us anytime for further questions!

This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information.

This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre.

This Intermac primus 322 Waterjet cutting machine was manufactured in the year 2014 in Italy and has 200 working hours. It is equipped with a working table, a pressure system, a PC unit with CAM/CAD drivers, a controller and a silo for technological sand water treating system. It is compatible with DXF, DWG, PDF, CDR, etc. The machine is in very good conditions.

This 3-axis Prima Industrie Platino 1530 PL 9000 was manufactured in 2001. It features a CO2 laser cutting machine with X-axis travel of 3000 mm, Y-axis travel of 1500 mm, and Z-axis travel of 150 mm. Maximum linear speeds reach up to 40 m/min on the X and Y axes, and 20 m/min on the Z-axis. If you are looking to get high-quality cutting capabilities, consider the Prima Industrie Platino 1530 PL 9000 machine we have for sale. Contact us for more information.

This 3-axis 3DGence Industry F420 was manufactured in 2021, featuring Fused Filament Fabrication with a dual extrusion head and a cleaning system for complex geometries. It includes three print modules for various materials, a 380 × 380 × 420 mm working chamber, and temperatures up to 500°C for the print head. If you are looking to get high-quality 3D printing capabilities, consider the 3DGence Industry F420 machine we have for sale. Contact us for more information about this machine.

This 3-axis AGIE AGIETRON Innovation 2 die-sinking EDM machine was manufactured in 2002. It features a robust AGIEVISION control system, a 28-position electrode changer, and a C-axis for rotation, indexing, and erosion. The machine can handle workpieces up to 650 x 580 x 250 mm and 400 kg. It boasts a high-performance AGIE IPG generator with a removal rate of 450 mm³/min for copper/steel. Consider the opportunity to buy this AGIE AGIETRON Innovation 2. Contact us for more information.

This INGRAMATIC RP72 L was manufactured in 2012. It features a double starter unit with TR7 dies, capable of threading diameters from M14 to M20. The machine operates at speeds up to 120 rpm, powered by a robust 45 kW motor. Weighing 15,000 kg, it is in very good condition and ready for immediate shipment. CE compliant and includes Brankamp control process. Contact us for more information about this machine.

This TIGER UKA 600 Cross cut installation was manufactured in 2015. It features a 600 mm saw blade, a cutting capacity of 165 x 240 mm at 90 degrees, and a motor power of 5.5 Kw. The machine includes a TigerStop 7.5 Automatic Stop and pusher, enhancing precision and efficiency. Ideal for semi-automatic or fully automatic operations, it supports a maximum feed speed of 40 m/min. Contact us for more information about this machine.

This 5-axis INTOREX TKC-1500 CNC Wood Machining Centre was manufactured in 2025. It features a high-performance electrospindle with a 7.5 kW motor, achieving speeds up to 22,000 rpm. The machine includes a rotary tool magazine with 8 slots and an automatic feed unit for workpieces up to 1500 mm in length. Fully enclosed safety guards ensure compliance with EU standards. If you are looking to get high-quality woodworking capabilities, consider the INTOREX TKC-1500 machine we have for sale. Contact us for more information.

Inline ILLIG RDKP72g full Servomotor 4-Station Thermoformer, age 2010, Double Heating Oven, Top heater 37,1 kW, Bottom heater 37,1 kW, Bosch REXROTH Indexing Servomotor, Form Station with Toggles and Servomotors on both Top and Bottom Form Plattens, Forming area with pneumatic clamping frame max. 671 x 535 mm, Material width with/ without sprung clamping frame max. 805 mm, Material thickness (varies with material type) max. 2.5 mm, Material transport accuracy ± 0.2 mm, Feed length max. 553 mm, Feed length min. 150 mm, Moulding height above material level, max. 120 mm, Formed part height beneath material level max. 120 mm, Total formed part height max. 120 mm, Sheet Sag Control, Transport Rail auto-spreading for PP, Servomotor Hole Punch Station, Servomotor Steel Rule Die Punching Station, Servomotor Stacking/ Counting Station, Cycle rate max. 40 rpm, Total electrical connection - Standa ...

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x Pallet rack trusses, used Material colour: grey INP profile: 80 x 42 mm Truss Type: TRV1-180-08-I Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per pair of trusses 2,700 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

General SKU379X1441 LocationBarneveld CEcheck MakeInstron TypeC-6898-000 Main Features MaterialStainless steel Motor0.03 KW Specified Features - Viscosity test machine Viscosity meter(Notching press) Electric capacity230 volt Motor0,03 kW, 230 volt MaterialStainless steel General No.50009 Year of construction2019 With switchcheck Floorspace0,52x0,44 m Total height0,44 m Weight43 kgOintmentsRubberPlastic & polymersFeed additivesFood additivesViscosity test machinesÌnstronIndustries > Pharmaceutical > OintmentsIndustries > Chemical > RubberIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed additivesIndustries > Food & Feed > Food additivesPlastic machinery > Viscosity test machinesBrand > Ìnstron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine.

This 3-axis Index MC 400 horizontal turning machine was manufactured in 2008. Ideal for precision turning operations, it offers robust construction and reliable performance. If you are looking to get high-quality turning capabilities consider the Index MC 400 machine we have for sale. Contact us for more information about this machine.

This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine.

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 KW, 800 kVA, 400 V

Jenbacher 416 Biogas 80,000 operating hours incl. Diane XT4 incl. control system

Infrico Medcare LTF 90S Laboratory Freezer The Infrico Medcare LTF 90S is a professional ultra-low temperature freezer from the Lab Care series from the Spanish manufacturer Infrico It is specially designed for use in laboratories and medical facilities to safely store samples at extremely low temperatures Technical features The LTF 90S is characterized by high temperature stability and precise control According to Infrico Medcare, the LTF series offers the following standard specifications: Control: Equipped with a digital controller and an intuitive touch screen Precision: Temperature stability is around ±1°C, with uniformity of less than ±2°C Alarm system: Has visual and audible alarms for temperature deviations, sensor faults and open doors Cooling: Use of natural refrigerants (such as R290 in newer models) for improved energy efficiency and environmen ...

General SKU288X384 MakeIka Werke TypeMHD 2000/05-ATEX No.200023306 Year of construction2020 Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor60 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 60x150 mm InletDN50 OutletDN32 Number of stages:2 Capacity700 l/h Motor7,5 kW, 400/690 volt, 2910 rpm, (Ex) Rotor speed6000 rpm MaterialStainless steel 1.4306 (304L) General LocationBarneveld Floorspace0,70x0,40 m Total height1,20 m CEcheck ATEX designedcheck Extra SpecificationsTotal cap. 700 l/h, solids cap. Max 500 l/h.Oils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesInline high shear mixersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsIKA WerkeIndustries > Food & Feed > Oils & fatIndus ...

Welding Fume Filter, Tebaron, TE 1200 – used - : Prices from location: 650.-€ (net) Manufacturer: ISI Industrie-Produkte GmbH Type: TE 1200 Year of Make: 1991 380V, 1.1kW, 2.6A, IP54 Rating: good Available: immediately Location: Waltrop

total power requirement:40 kW Out of valve production

General SKU293X399 MakeLauda TypeT2200 W Mach.No.LWP104-13-0007 Year of construction2022 Main Features Heating (medium)Electric Capacity3.1 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck With coolingcheck Temperature-25°C/120°C Tank capacity7 l. With pumpcheck Motor3,1 kW, 230 volt With temperature controllercheck General LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace0,45x0,70 m Total height0,80 m CEcheck Extra SpecificationsCool medium R404AOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsTemperature control unitsCosmeticsE-waste & metalFood ...

General SKU350W925 LocationBarneveld Pressure Working pressure3 Bar Main Features MaterialStainless steel Motor19 KW Rotor130 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 130 x 50 mm Inlet80 mm Outlet25 mm With mechanical sealcheck Motor16,5/19 kW, 400 volt, 1460/2930 rpm MaterialStainless steel General MakeBecomix Year of constructionUnknown Mounted on framecheck Floorspace0,50 x 0,90 m Total height0,80 m Weight300 kg Extra Specifications- With input hoseOils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesInline high shear mixersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsBecomixIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndus ...

weight of the machine ca.:2,5 t spindle passage:65 mm

turning length:400 mm total power requirement:45 kW weight of the machine ca.:4 t dimensions of the machine ca.:3,58 x 1,91 x 2,05 m spindle passage:45 mm

General SKU231U211 LocationBarneveld MakeInterplast TypeMEX Main Features MaterialStainless steel Volume750 Ltr. Motor15 KW Specified Features - Ribbon blender Ribbon blendercheck CapacityCa. 750 ltr Trough sizes1400 x 900 mm With coverwith funel Inlet600 x 600 mm Outlet200 mm Motor15 kW, 380 volt, 1455/125 rpm Speed mixing shaft25 rpm MaterialStainless steel 1.4301 (304) General No.0151 Year of construction1992 Mounted on frame(mild steel) Floor space2 x 1,2 m Total height2,6 m Weight1500 kg Extra SpecificationsAxle diameter 25 mmPowdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersRibbon blendersCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicInterplastIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medi ...

General SKU251M191 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/50-20 No.14078-01 Main Features MaterialStainless steel Motor45 KW Rotor150 mm Specified Features - Inline mixer Continuous reactor:In-line dispersing machine: (1x) Rotor sizesdia. 150mm Inletdia. 80mm Outletdia. 80mm Motor45,0 KW, 400/690 Volt Rotor speed2960 Rpm MaterialStainless steel 1.4571 (316Ti) General Year of construction2005 Floorspace1,4x0,8 M Total height0,8 M Weight500 KGOils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesInline high shear mixersDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsFlukoIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Bio ...