bag in box used for sale

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 2019 Tested at 37°C and -2°C

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2010 Tested at 37°C and -2°C

UVP HL-2000 Hybridization Incubator Temperature range: From ambient temperature +10°C to 99.9°C Hybridization furnace Model: HL-2000 HybriLinker 2 independent devices in 1 Membrane fixation by 254nm UV irradiation and hybridization Stainless steel interior Door with glass window protecting from ß emissions For long tubes. 300mm max The rotating wheel can hold up to twenty 35 x 150 mm bottles and ten 35 x 300 mm bottles at a time Membrane drawer with UV-resistant viewing window In excellent condition Tested at 37°C

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the rear wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2008 Tested at 37°C and -10°C Slightly deformed sheet metal at the front

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 2003 Tested at 37°C and -2°C

STUART SI505 Incubator Shaker for Microplates Orbital agitation amplitude 1.5 mm Stirring speed: 250 to 1250 rpm for 4 microplates or 2 microtube holders Temperature range (°C): ambient +7°C to 60°C Temperature Resolution (°C): 0.1°C Timer: min/sec, hour/min, day/hour Speed control: digital regulation in 10 rpm increments. Platform dimensions (mm): 220 x 220 Internal dimensions L x W x H (mm): 307 x 300 x 190 External dimensions L x W x H (mm): 361 x 405 x 430 Heating power (W): 200 Power supply (V / Hz / W): 230 / 50 / 300 IP rating: 31 Weight (kg) : 22.5 In excellent working condition

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 1999 Tested at 37°C and -2°C

Overview  This fill level inspection machine was manufactured in 2019 by German company HEUFT. It is designed for checking the fill height and closure of full bottles. The system is available immediately and still installed. A personal inspection is possible on site. Technical data Capacity: up to 72,000 bph Formats: 75 cl Inspection features: Fill level and cap control Scope of Delivery  Fill level inspection system | HEUFT | PRIME | 2019 Reject system | HEUFT | DELTA-FW | 2019 Bottle conveyor (10 meters)

ABB DCT880-W03-0160-04XA DC Drive 160A 110kW Inverter DCT880 DCT880-W03-0160-04 Item Condition: New (Other) The item is new, but may show traces of storage. Technical data: Type: DCT880-W03-0160-04 (3-leg, 3-phase) Rated current: 160 A Input voltage: 110-400 V AC, 3-phase Power: approx. 110 kW (at 400 V) Weight: ~16 kg Dimensions: approx. 370 × 271 × 270 mm Note: For detailed technical data and processing instructions, we strongly recommend that you consult the original data sheets or information directly from the manufacturer More items - new and used - can be found in our shop! International shipping costs on request! PD16

Key data: 1000 kN

ARBURG ALLROUNDER SELECTA 470 S 1000 – 675 (Year 2001) Serial number: 187132 – Machine 8 Clamping force: 1000 kN Distance between tie bars: 470 x 470 mm Platen size: 637 x 637 mm Max. mould height: 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Shot volume: 675 cm³ Operating voltage: 400 V – 3 Ph – 50 Hz Heating capacity: 14.9 kW Pump motor: 1 x 22.00 kW Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h, 2140 mm. Machine weight: 5400 kg

Key data: 500 kN

ARBURG ALLROUNDER CENTEX 320 C 500 – 250 (Year 2002) Serial number: 188161 – Machine no. 30 Clamping force: 500 kN Distance between tie bars: 320 x 320 mm Platen dimensions: 446 x 446 mm Injection unit (EUROMAP): 250 Approx. shot volume: 106 cm³ Shot weight (PS): 97 g Operating voltage: 400 V – 3 Ph – 50 Hz Heating capacity: 6.5 kW Pump motor: 1 x 15.00 kW Total connected load: 21.5 kW Machine weight: 2330 kg

240V, 50HZ, 0.75KW, 2.8A, 1420RPM FACTORY F40

Clamping force: 1000 kN. Distance between tie bars: 470 x 470 mm. Platen size: 637 x 637 mm. Max. mould height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Shot volume: 675 cm³. Operating voltage: 400 V – 3 Ph – 50 Hz. Heating capacity: 14.9 kW. Pump motor: 1 x 22.00 kW. Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h. 2140 mm. Machine weight: 5400 kg. Serial number: 187133 – Machine 9

- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.

PLC control, digital output, digital input, digital input module -Manufacturer: Siemens, SIMATIC S7, Digital Input Module with Base Unit -Type: 6ES7 131-6BF01-0BA0 6ES7131-6BF01-0BA0 -Base unit: SIMATIC ET 200SP 6ES7193-6BP00-0DA0 -Number: 3 modules available -Price: per piece -Dimensions: 118/18/H74 mm -Weight: 0.1 kg/pc.

B&A REF:  9307 TON: 1100 SCREW DIAMETER:  105MM SHOT WEIGHT: 3075 STROKE VOLUME:  3380CM3 INJECTION PRESSURE: 1600AR PLATEN SIZES:  1850 X 1810MM DBTB: 1400 X 1150MM MIN MOULD HEIGHT:  600MM MAX MOULD HEIGHT: 1200MM MOULD OPENING STROKE:  1800MM MAX DAYLIGHT:  2400MM EJECTOR STROKE:  300MM CONTROLS: CC 200 TOUCH CORE PULLING: 4 AIR VALVES: 2 MOTOR: 75 HEATING CAPACITY: 72KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9302 TON: 270 SCREW DIAMETER:  55MM SHOT WEIGHT: 594 STROKE VOLUME:  653CM3 INJECTION PRESSURE:  2041AR PLATEN SIZES: 940 X 940MM DBTB: 630 X 630MM MIN MOULD HEIGHT:  250MM MAX MOULD HEIGHT: 650MM MOULD OPENING STROKE:  600MM MAX DAYLIGHT:  1250MM EJECTOR STROKE:  200MM CONTROLS: UNILOG B4 CORE PULLING: 2 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY:  18.2KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9311 TON: 260 SCREW DIAMETER:  55MM SHOT WEIGHT: 605 STROKE VOLUME:  642CM3 INJECTION PRESSURE:  1460AR PLATEN SIZES:  960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1400MM EJECTOR STROKE:  225MM CONTROLS:  CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22  HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:  HYDRAULIC

1.370 litre, Stock number: T3966, Litre: 1.370, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, electrically heated, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 410 mm., Turbolence plate: Yes, 1 pc., Agitator: Yes, 2 pcs., Agitator type: Propeller and anchor agitator with scrape, Agitator placement: From the top, Motor Propeller: 5 kW - 380 Volt - 150 rpm., Motor Anchor agitator: 6,8 kW - 230/400 Volt - 40 rpm., Working temperature: 0-100° C, Working pressure tank: -1/+1 Bar, Inner diameter: Ø 1250 mm., Outer diameter: D 1470 mm., Total height: H 2650 mm., Manufacturer: Intersteel, Year: 1994

PUREGEN PGA 3672 SIMPLEX SYSTEM MAKE : PUREGEN GROUP OPERATION : AUTO BACKWASH SYSTEM DIMENSIONS : 36" Ø x 72" H FLOW RATE : ≈ 25 m3/hr MAX OPERATING PRESSURE : 150 PSI MATERIAL : STAINLESS STEEL SS304 WATER QUALITY : UP TO 10 MICRONS C/W JKKP DESIGN APPROVAL EACH FILTER C/W SUPER MICROSITE FILTRATION MEDIA WHICH CONSISTS OF 6 LAYERS OF ADVANCE DESIGNED MEDIA : ACTIVATED CARBON GREEN SAND SILICA SAND FINE SAND COARSE SAND QUARTZ STONE PLEASE CONTACT AARON: 0173698203 (MALAYSIA NUMBER) Located at Factory 04

MEMMERT BE 800 incubator / oven with natural convection 70°C Capacity: 749 liters Temperature range: ambient temperature +5 °C to +70 °C Interior glass door Built-in digital temperature display 4 stainless steel shelves On wheels Power supply: 230 V Frequency: 50-60 Hz Power: 2000 W External dimensions (W) x D x (H): 119 x 75 x 161.5 cm Internal dimensions (W) x D x H: 103.5 x 60 x 120cm Tested at 37°C (36.2°C reading) and 50°C (48.2°C reading) Very stable indoor temperature, only a slight difference between the required temperature and the actual temperature

Sandretto Nove HP 100 Injection Moulding Machine + Chiller & Hoist Overview Excellent opportunity to acquire a complete plastic injection moulding cell. This lot features the reliable Sandretto Nove HP 100 industrial injection moulding machine, capable of processing a wide variety of polymers (PP, PE, ABS, PS, PA, PC). To provide a complete turnkey solution for your manufacturing floor, the sale also includes the original Sandretto Nove chiller (cooling unit) and a Sandretto Otto 150 hoist. Clamping Unit Specifications Clamping Force: ~100 Tons (≈ 980 kN) Tie-Bar Clearance: ~410 mm (16.14") Maximum Mould Opening: ~460 mm Minimum Mould Thickness: ~100 mm Clamping Type: Hydraulic 4-tie-bar system Injection Unit Specifications Screw Diameter: Variable (approx. 30–45 mm depending on version) L/D Ratio: ~18:1 to 22:1 Injection Pressure: Up to ~1500–2000 ...

Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data Manufacturer: Krones Model: Linatronic M Machine type: Empty bottle inspector Year of manufacture: 2015 Capacity: up to approx. 15,000 bottles per hour and  ...

Injection moulding machine ARBURG 820 S 4000-2100 with Multilift Select (2016)

Technical data on request !

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

Screw diameter: 120 mm Injectable volume / Shot volume: 6785 cm3 Injectable weight / Shot weight: 6100 g Injection pressure: 1620 bar Column passage / Bettween tie bar: 1120 x 1000 mm Mold Thickness /Tickness tie bar: 500-1200 mm Opening stroke: 1200 mm Ejection stroke: 400 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 110 mm Injectable volume / Shot volume: 5160 cm3 Injectable weight / Shot weight: 4700 g Injection pressure: 1620 bar Passage between columns / Bettween tie bar: 950 x 1100 mm Mold Thickness /Tickness tie bar: 400-1100 mm Opening stroke: 1080 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

Model: M-10iA/6L Serial Number: R11Y01899 Year of manufacture: 2011 Load capacity: 6 kg Reach: 1630 mm Number of axles: 6 Weight: 135 kg

Workpiece sizes: Length 180 - 2500 mm, width 150 - 800 mm, thickness 12 - 40 mm Fixed side at the left, motorised width adjustment of the right side Working height/ transport height: 920 mm Workpiecetransport with belts, infeed belts can lift up Variable feed speed Each side has got 5 glue injectors and 8 dowel inserters (Type 34) Doweldiameter: 8 mm, dowellength 30 mm, dowelprojection 7-14 mm, dowelcenters min. 32 mm, max. 736 mm Each side with dowel hopper feed with shaker and separators Controll mirror Glue pump 1:1 Glue injection controlls type ELC

Belt width: 260 mm, Description: Including add-on tenderiser of 104 knives, Needles: 21 pcs. of 4 mm, Product height: max 210 mm, Speed: 72 RPM, Power: 3 x 400V, 50Hz, 2.3kW, Dimensions: 1500 x 700 x 1800 mm, Weight: 210 kg

Internal cylindrical grinding machine, Tripet Swiss, 1991, Schleifdia. 0.5 - 30mm, Grinding depth: 50, Center height: 102, Axles: Z , Y, U, B, V, , autom. Chuck, ...

Year: 2021 Axles: 6 Max Reach: 2701mm Rated load: 210 kg Max load: ~270 kg Weight: 1107 kg Control: KRC4 Remote control: KUKA SmartPad Model: KUKA KR 210 R2700-2 FLR (QUANTEC-2 Series) Serial Number: 1077133

Year of manufacture: 2020 Serial Number: 10023754 Load capacity: 360 kg Reach: 2830 mm Control: KRC4

This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details.

KUKA KR60 L30-3 industrial robot Year of manufacture: 2017 Load capacity: 30 kg Reach: 2429 mm Control: KUKA KRC4 2 pcs available.

This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details.

KUKA grinding cell with KR 180 robot Set Year of manufacture: 2011 Reach: 2498 mm Controls: Kuka KRC4 Load capacity: 180 kg We have 4 goals Remote control

This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details.

Year of manufacture: 2012 Control: KUKA KRC4 Lifting capacity: 240kg Reach: 2896mm

This Husky HL225 RS65 was manufactured in 2011. It features a clamping force of 225 tons and a screw diameter of 60 mm, optimized for high-speed PET preform production. The machine includes a platen size of 750 x 750 mm and an opening stroke of 500 – 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky HL225 RS65 electrical injection moulding machine we have for sale. Contact us for further details.

Model: KR 210 R2700 prime Serial Number: 642212 Year of manufacture: 2015 Payload: 210 kg Reach: 2696 mm Weight: 1111 kg

This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 14 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details.

Country of manufacture: Germany Year of manufacture: 2015 Reach: 1801 mm Repeatability: +/- 0.5mm Number of axles: 6 Load capacity: 16 kg Control: KPC4 Weight: 245 kg

This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.

Model: KR 270 R2700 Ultra Version: C4 FLR (Floor) Year of manufacture: 2017 Load capacity: 270 kg Reach: 2696 mm Weight: 1129 kg Controller: KUKA KR C4 Serial Number: 663438

Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details.