128,849 used machines on RESALE, but how to find them? Machine Search
Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...
The LiquiPrep LP804 50/20 by Material Preparation and Feeding Unit is a state-of-the-art automated system designed for the continuous, bubble-free supply of high-viscosity media, including gap fillers, thermally conductive pastes, and adhesives. It boasts a tank capacity of 53.5/24.6 L (gross) with an agitator speed of 39 rpm and a maximum feed pressure of 12 bar. This machine includes a diaphragm pump with a volume of 100 ml per stroke and a vacuum pump rate of 267 l/min. The package comes with the DOS P300-2C01 dispensing head and the flexible DOS-GP-1C01 Logic control unit. The unit is suitable for electronic control systems and offers modular, low-maintenance integration for seamless automation. Available for immediate purchase in [Location TBA].
DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
REF-2665 ILPRA FS 2500 V/G AUTOMATIC CUP FILLER-SEALER Manufacturer: ILPRA Series: FILL SEAL Model: FS 2500 V/G FL Serial no.: FS1071 Year: 2017 Automatic rotary filling-sealing machine for cups of different materials. Compact and flexible model, tailored to handle a diverse range of food products from liquids and creams to granules, even with solid particles in suspension. Maximum output of approximately 2,500 pieces per hour. Voltage: 400 V + N Overall dimensions (mm): 2,350 x 1,280 x 2,200 (LxWxH) Weight: approx. 900 kg
Volumetric filling of liquid and viscous foods such as sauces, oils, marinades, dressings or comparable products into suitable containers (e.g. bowls, bags, cans, jars, cups) Basic structure: stainless steel frame with integrated product hopper, filling station with 5 piston cylinders and filling valves, drive unit, control unit. Product funnel: Made of stainless steel, with removable lid. Level sensor for detecting the product level in the tank and automatic replenishment by upstream pumps/containers Parts in contact with the product in stainless steel or food-grade design, easy to disassemble for cleaning. Filling valves optionally fixed or with tracking movement to follow the packaging material movement and enable higher outputs
Cone Ice Cream Filler — Machine Description, This industrial Cone Ice Cream Filler is a purpose-built, high-efficiency production machine engineered for automatic filling of pre-formed ice cream cones. Designed for use in commercial frozen dessert facilities, the system delivers precise, hygienic portioning and consistent presentation, even with soft-serve, artisan, or premium ice cream products., Constructed with robust, food-grade stainless steel and sanitary components, the machine supports continuous high-speed operation while ensuring optimal product handling. The precision dosing mechanism gently fills each cone to the exact weight or volume specification, minimizing giveaway and reducing waste., Featuring a smooth indexing conveyor and adjustable fill heads, this filler is ideal for both medium and large-scale production lines. Its design integrates easily into existing workflow ...
Component Manufacturer / Model Year Capacity / Notes Condition Depalletiser "KETTNER PRESS UNI ABSCH Komm.Nr. 96/0143/037" — Can depalletising — start of line Good — annual overhaul Rinser (water / ClO₂) MEYER Typ: Hyet 2020 25,000 c/h Good — annual overhaul Filler — Isobaric CO₂ "KHS Inofill CAN DVD 50 (0.5L, 0.33L, Pint)" 2020 "25,000 c/h CO₂ atmosphere, foaming device, buffer tank" Very Good — 2020, annual overhaul Seamer FERRUM F 08 2020 25,000 c/h Very Good — 2020, annual overhaul Full Can Inspector "HEUFT SPECTRUM VX TI 36 Level control" 2020 "25,000 c/h Full level + quality inspection" Very Good — 2020, annual overhaul Tunnel Pasteuriser "NIKO Typ: 095.31.152.100.1 Nr. 41540/96" — Post-fill pasteurisation Good — annual overhaul Can Packer Included in line 2021 Multi-pack formation Good — annual overhaul Palletiser Included in line 2021 End ...
PLC / Microorganism Enumeration System BIOMERIEUX TEMPO READER + 2 x FILLER Year of manufacture: 2020 TEMPO is an automated platform for the analysis of quality indicators. Composition: 1 TEMPO READER module 2 TEMPO FILLER modules With accessories: 2 Intel Core I3 computers 1 barcode scanner. Software Cables Numerous white plastic supports Untested equipment
BIOMERIEUX TEMPO READER + FILLER PLC TEMPO is an automated platform for the analysis of quality indicators. TEMPO READER TEMPO FILLER With accessories: 2 Intel Core I3 computers + screens + keyboards 3 barcode scanners (2 Xenon 1900 + 1 Voyager 1250g). Software Cables Numerous white plastic supports Untested equipment
General SKUR0075 LocationBarneveld Main Features MaterialStainless steel Number of1 heads Specified Features - Liquid filler MaterialStainless steel Fillercheck Motor0,55 kW 230/400 Volt (pump), 0,25 kW 230/400 Volt (mixer) Information Makeunknown manufacturer plate is missing Year of constructionunknown With switchgearcheck Floorspace1,4x0,9 M Total height2,0 M Extra SpecificationsThis is a liquid dosing system where a quantity can be filled using a flow meter. The mobile skid contains a tank of 60 Ltr with the dimensions dia 370x630mm with a stirrer. A Suurmond pump with a capacity between 2 and 6 ltr / min with a maximum pressure of 9 bar. An Endress + Hauser (E&:H) Promass flow meter provides the dosage quantity. Liquid fillers-Packaging machines > Liquid fillersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...
with control unit, vacuum pump, Fabr. BECKER & Drilling Unit
Ward Bekker Auger Filler Stainless frame, 25Kg stainless agitated hopper, 35mm diameter screw, with foot pedal, mobile, 3Ph
General SKU014Y168 MakeCarbo-Fill LocationBarneveld CEcheck TypeCF97-SF Main Features MaterialStainless steel Number of1 heads Specified Features - Liquid filler MaterialStainless steel Fillercheck Number of filling heads:1 Information No.960068 Year of construction1997 With switchgearcheck Floorspace1,1x0,8 M Total height2,1 MDiscountLiquid fillersOmve NetherlandDiscountPackaging machines > Liquid fillersBrand > Omve Netherland What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Bag opener to open the bag like "Gelber sack", etc. As a stand-alone device usable or as components in E.g. a sorting facility. Capacity: 20-30 cbm Power: ~ 22kW Dimensions: 8000x2350x2700mm Weight: 11t Exhibition machine, condition as new. more data and estimate on request.
Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm
Repacking station for big bags or open bags. Including feed hopper with vibrating function, folding box and screw conveyor Availability: immediately Condition: in working order, well-maintained
Automatic Paper Bag Making Machine ZENBO 1260S-450 Age 2019 Max Bag width450 Max paper feeding size 1260
1 of used bag-in-box filler, make Alfa Laval, type Piccolo, semi-automatic, new 2011. With nitrogen connection. Used for filling apple-juice and wine in 2 and 3 liter bags with Vitop caps.
This single head Alfa Laval Astepo Aseptic Pilot Filling System for bag-in-box (PTAF) system is a filling system for filling of a wide range of food and beverage products info appropriate bag-in-box bags under aseptic conditions. The PTAF filling system has been designed for use in laboratory and pilot applications as well as for taking sterile samples in aseptic industrial plants. A fail safe system continuously controls the sterile conditions. In case of an unexpected risk of sterility loss the equipment aborts production and notifies the operator. The PLC only allows for return to production mode after all the necessary parameters for sterility have been reset succesfull., This PTAF aseptic pilot filling system is designed for 1-20 litre (1/2 - 6 gallons) sterile bags of the bag-in-box type. It is available with a 1 inch filling valve for liquid products, dense and viscous. It is also ...
used
R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately
used
bag width 80 - 260 mm bag length 160 - 450 mm Available: sofort
1 AUTIMAK folding and bagging machine type M-300, year 2011 (machine has never been intensively used and is like new), Compact machine for folding and bagging of textile garments like t-shirts, shirts, scarves, heads, carves, towels, cleaning cloths, etc... Size adjustable from children to adult sizes. It uses standard bags with flap for heat-sealing. Otherwise it can use standard bags with self-adhesive on the flap. Possibility to use cardboard supports. Adjustable folding dimensions and bag size. The bag is heat-sealed with a Teflon protected blade which can seal polypropylene. It has a temperature controller for the heat-sealing blade. Garment counter included. The production is 600 T-shirts per hour with only one worker. It can fold and bag 2 T-shirts at once, doubling production speed. Bag dimensions: 25–30 cm wide x 32-38 cm long.
Technibag B BOOSTER Bag in box filler Fully automatic filling machine for soft bags and / or POUCHS (stand-up bags) Carton format: 2 L to 20 L Description of the machine: Measures and weight: Length: 1880 mm Width: 1130 mm Height: 2100 mm Weight: 370 kg Liquid flow rate: 80 hl / h - Connection: diameter 40 Macon Compressed air supply: 7 to 10 b - flow: 7m3 / h. Connection Type Rectus 26 Nitrogen supply: 1 to 4 b-flow: 1m3 / h. Connection Type Rectus 26 Power supply: 400v - 3p + neutral (N) + earth (E) - power 0.7 Kw Pulse counter: Electromagnetic counters Noise emission:
PFM SWIFT packaging machine manufactured in 1995, performs the automatic process of packaging various types of products in foil packaging. The reliable and very easy-to-use machine takes the film from a reel above the working area, that is then accurately measured, appropriately cut and cold or hot sealed. At the very end of the process, a special device punches a EUROSLOT hole in the packaging. The packaging machine tooling does not need to be changed when changing the dimensions of the packs. The SWIFT packaging machine weighs 380 kg. Technical data of the PFM SWIFT packaging machine - packing material type: single or multilayer thermo-weldable materials (propylene cellulose film, coextruded film etc.) or PVC - sealing type: elongated profile, spacing 2x 90° - capacity: 60 packs/min - device for making EUROSLOT holes - unloading conveyor - power: 3.2 kW - power supply: 380 V ...
Block/SOS bag machine with flat inside handle device, Carrier bag machine, 53bb + 43ct Bag width: 14-32cm Bottom width: 6-20cm Tube length 35-70cm with fotocell for preprinted paper, 1 ply option: 2 plies option: 4 or 5 colour tail end printer
Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³
Manufacturer: Hassia Type: Redatron The packaging machine is designed a vertical hose bag packaging machine for continuous operation. 60 packages per minute Size of packaging: maximum length: 400 mm maximum width 200mm optionally with euro hole tear-open thread 3 x 380 V 220 V 50 Hz
The Table Top Print bag packer enables the efficient packaging and sealing of products into pre-made bags and is suitable for various formats. The machine is easy to operate and has a user-friendly display that can be used to set up, save jobs and control operating parameters. For more flexibility, it offers automatic and manual operating modes with a secure sealing rail. The briefing of a packaging employee takes less than five minutes. With integrated thermal transfer printing technology, pouches can be printed directly with high-resolution graphics, text and barcodes, eliminating the need for separate labeling. Features - Multi-color screen for easy adjustment - Number of products to be packed can be set in advance - Integrated total counter of the products (incl. reset option) - Roll change in less than a minute - Welding by foot signal, automatically or by hand pres ...
used
Packing machine of the SIG type HBS With a Siemens S7 control If you have questions you can me any time call. Phone: 0049 1718367957 Mobile phone: 0049 1718367957
Pillow-pack machine Max 80 packages per minute thermally sealed
Gross bar scale for filling open bags from 10 - 50 kg, with feed paddle screw incl. drive 1.1 kW for coarse and fine current dosing, with pneumatic sack clamp (200 mm) and automatic bag drop, mounted on an elastic stand frame. Last used for the filling of construction chemical products; good condition, last calibration in 2014.
We can offer: Windmoeller & Hoelscher Type : Triumph 1 Year: 1980 Bag width 50 - 120 mm. Tube length 120 - 340 mm. Bottom width 35 - 70 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels We also have available a suitable 2 and 4 colour tail end printer
approx. 120 packages per minute Bag width: approx. 80 to 250 mm Bag length: approx. 400 mm max. infinitely adjustable Dimensions: approx. 1,260 x 2,500 x 1,700 mm Net weight: approx. 1,100 kg
We can offer: Fischer + Krecke Type : Combi 31bb Year: 1980 Bag width 90 - 260 mm. Tube length 250 - 470 mm. Bottom width 40 - 140 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels
used
Capacity 85 beats / min.
maximum number of results exceeded
please refine your search
3.000 € 
