bag 50 used for sale

3M Scotch-Brite ribbon roller refills Weight: 56KG net Auction-ID: A1-46070-293

Unused ; UWM 500 welding manipulator ; MIG/MAG CO2 and TIG ; capacity vertical 500 kg ; horizontal capacity 250 kg ; tiltable up to 135° ; table diameter 550 mm ; rotation speed 0–5 rpm ; 230 V ; foot control ; Machine weight approx. 220 kg Auction-ID: A1-45170-15

General overhauled, new seals etc. Auction-ID: A1-46315-42

SKF - 29496 EM - Solid metal cage barrel bearing Auction-ID: A1-46070-329

Lot Schneider Electric KNX Access RTC glass black MTN6903-6214 (50x) Auction-ID: A1-46070-4

Steel construction - mezzanine, 500kg/m2, approx. 2,000 m2 available - used - : Price from location: now only 79,000 € instead of 130,000 € (net), dismantled, packed and loaded. Particleboard is available for about 60% of the area – but in not so good condition! Manufacturer: Pro Man Type: Mezzanine Year of Make: 2007 Max. stage load: 500kg/m2 Floor height (upper edge of floor covering): 3,462mm Bottom edge beam: 3,230mm Dimensions: 71,000 mm x 28,000 mm. approx. 1,988 sqm OK Platform: 3,462 mm UK Stage: 3,220 mm Flooring 38 mm chipboard 1 pallet transfer station Wheelbase: 4 x 4m Stage covering was partly chipboard (38mm), partly gratings Bottom edge chipboard: white Condition: very good Available: immediately Location: Niedernberg near Aschaffenburg There are additional costs for the buyer: new screws, etc. Accessories (stairs, railings, pallet tr ...

Original LINCK chain conveyor with steel carriers length A-A approx. 6,500 mm

Hydraulic-mechanical 4 wheel cold milling machine for asphalt and concrete, milling drum between the rear wheels, milling width can be reduced by dismantling half shells of 250 mm each, hydromechanical drive, hydraulic steering (front axle as steering axle, front axle as steering axle, front axle as steering axle, hydraulic steering machine) Auction-ID: 04B-721-4

\" Mitutoyo Digital Screw Gauge 25–50 mm – 0.001 mm – IP54 – Type MDC-50J Digital Screw Gauge from the manufacturer Mitutoyo from the MDC series. The gauge covers the range of 25-50 mm and offers a high-resolution reading of 0.001 mm. The version is IP54 protected and therefore suitable for workshop use. The device is housed in the original Mitutoyo plastic case with insert. • Manufacturer: Mitutoyo • Type: MDC-50J / Item No. 293-286 • Measuring range: 25–50 mm • Resolution: 0.001 mm • Degree of protection: IP54 • Version: Digital, metric \" Auction-ID: A7-46417-213

Column-mounted slewing crane 2,500 kg with electric chain hoist Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: ZSD 2500-6/4,5 Year of construction: 2006 Factory no.: 049/06 Column-mounted slewing crane make Mechanik Taucha with a load capacity of 2,500 kg. The system is equipped with an electric chain hoist from the Demag brand. The stroke is carried out electrically via a Demag electric chain hoist type DKUN 16-1250 with two speeds (fine stroke / fast stroke). The chain hoist moves back and forth electrically on the boom (trolley ride). The swinging movement of the boom is electric. Operation via pendant switch control with emergency stop. System consisting of column, boom, swivel drive and electric chain hoist. Column-mounted slewing crane Boom approx. 5 m Electric chain hoist Demag electric trolley travel Electric slewing mechanism Pendant switch control A test book for t ...

\" Mitutoyo ABSOLUTE Digimatic caliper with digital display. Version with ABS measuring system (no loss of reference when switched on). Condition: Used, good condition. Measuring surfaces clean, rail slightly used with usual signs of use. Display functional (according to visual inspection), no cracks. Item: Digital caliper Manufacturer: Mitutoyo Model / Type: ABSOLUTE Digimatic Code No.: 500-181-20 Measuring range: 0–150 mm Origin: Made in Japan • Measuring range: 0–150 mm • Reading: 0.01 mm • System: ABSOLUTE Digimatic • Functions: On/Off, Zero/ABS • Material: Stainless steel, hardened • Manufacturer: Mitutoyo Corp., Japan \" Auction-ID: A7-46417-151

Digital Internal Gauge for Large Diameters – 300–500 mm – Messwerk XT – Bowers / messwelk Digital bore gauge for large diameters in an original wooden box. The system is designed for precise internal measurements in the range of 300 to 500 mm and is based on the Bowers XT (Xtreme) measuring mechanism with digital display.     •    Digital indoor measuring device with XT measuring mechanism (IP65)     •    Measuring body / measuring bridge     •    Extensive set of interchangeable measuring heads / probes     •    Adjustment ring XT 300 mm (separate wooden box)     •    Original wooden boxes Condition:     •    Used, overall neat co ...

\" Workbench / laboratory bench 1100 × 500 × 750 mm – with 4 drawers – without contents Workbench or laboratory bench in solid design. Robust worktop • Right side with 4 metal drawers • Left side open (legroom / device storage) • Sheet steel body • Powder-coated surface Dimensions (approx.): Width: 1,100 mm Depth: 500 mm Height: 750 mm \" Auction-ID: A7-46417-305

Column slewing crane 500 kg with electric chain hoist Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: (nameplate not clearly legible) Year of construction: not known Column slewing crane make Mechanik Taucha with a load capacity of 500 kg. The system is equipped with an LIFTKET electric chain hoist. The stroke is carried out electrically via the electric chain hoist. The movement of the trolley on the boom is manual (forward/backward). The swivel movement of the crane is also manual. Operation via pendant button control. System consisting of column, boom and electric chain hoist. Column-mounted slewing crane Boom approx. 5 m LIFTKET electric chain hoist Manual trolley travel Manual swivel movement Pendant switch control A test book for the crane system is available. Viewing and test run under voltage possible by appointment. Load capacity: 500 kg Hoist Electric chain hoist m ...

\" Column-mounted slewing crane with two booms and two electric chain hoists Manufacturer Crane system: Mechanik Taucha Fördertechnik GmbH Year: not known Stable column-mounted slewing crane system with two parallel booms for supplying several machine workstations. The crane is equipped with two different electric chain hoists: • 500 kg main load capacity with LIFTKET electric chain hoist • 70 kg secondary lift with DEMAG electric chain hoist The main lift is suitable for workpieces, clamping devices or fixtures up to 500 kg. The second boom with a load capacity of 70 kg is ideal for smaller components or tools. The stroke is carried out electrically via the respective chain hoists. The movement of the trolleys on the outriggers is manual (forwards / backwards). The swivel movement of the entire crane system is carried out manually via the column. Operation via pendant switch cont ...

\" Pillar slewing crane 500 kg with electric chain LIFTKET – radius 4,000 mm • Manufacturer Mechanik Taucha Fördertechnik GmbH • Type / model GSX 500-3.5/3.25 Pillar slewing crane make Mechanik Taucha, year of construction 2001.Equipment : • Load capacity 500 kg • Radius 4,000 mm • Electric chain make LIFTKET • Electric drive (electric feed of the trolley) • Two-stage hoist with fine stroke • Suspension switch • Column mounting • Nameplate available Dimensions: • H1 (total height): 3,500 mm • H2 (hook height): 2,750 mm • A (radius): 4,000 mm Condition: Used, dismantled during operation. Usual age-related signs of wear. Lifting capacity: 500 kg Year: 2001 Type: GSX 500-3.5/3.25 Hoist: electric, 2-stage with fine lift Chassis: electrically movable Swivel range: column-guided Manufacturer's hoist: LIFTKET\" Auction-ID: A7-46417-372

• Manufacturer VEB METAN, 9318 Tannenberg / Erzgebirge • Type / Model Tool Cabinet Model I • Name Steel Tool Cabinet METAN Model I • Description, Accessories, Condition Stable DDR tool cabinet in welded sheet steel design. Version with one door, a drawer in the upper area and several shelves. Industrial version in typical green paintwork. Used condition with age-related paint damage, scratches and corrosion approaches. Cabinet is sold without contents. • Technical data External dimensions according to the nameplate: approx. 965 x 500 x 400 mm Sheet steel construction 1 door 1 drawer Several shelves Auction-ID: A7-46417-356

\" Renishaw ball stylus for use on coordinate measuring machines (CMMs). • Manufacturer: Renishaw • Manufacturer no.: A-5000-7721 • Type: Ball button / stylus • Ball material: Plastic / rubber (black) • Shaft material: Metal • Thread: Renishaw standard (external thread, exact size not specified) • Application: Coordinate measuring machines (CMM) • Compatibility: Renishaw pushbutton systems \" Auction-ID: A7-46417-264

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-45902-88

\" ÖSTLING EU-CLASSIC Electrolytic Marking System 300/500 VA Used electrolytic marking system from the manufacturer ÖSTLING Markiersysteme GmbH, type EU-CLASSIC. The device is used for permanent marking of metal surfaces by means of electrolytic marking (e.g. nameplates, serial numbers, logos, workpiece marking). Version with digital control panel and adjustable parameters. Scope of delivery according to pictures: • Control unit EU-CLASSIC • Marking handpiece • Connection cables • Container for electrolyte • Operating instructions • Floppy disk / license documents for stencil creation Type plate information: • Type: EU CLASSIC • Year of construction: 1998 • Nominal voltage: 115 / 230 V • Power: 300 / 500 VA • Output voltage: 0–30 V AC/DC Usage condition with usual signs of use. • Manufacturer: ÖSTLING Markiersysteme GmbH, Solingen • Model: EU-CLASSIC � ...

\" (2x) Tool cabinet model I – industrial version • Manufacturer VEB METAN Tannenberg / Erzgebirge (MEIAN) • Type / model tool cabinet model I 2 pieces compact tool cabinets in heavy sheet steel design. Nameplate: Tool cabinet Model I Size: 965 x 500 x 400 mm TGL 48-52110 ELN-NO. 13961160 Version with: • 1 hinged door per cabinet • Internal shelf • Drawer in the upper area • Stable welded steel body Condition: Used with clear signs of wear (paint damage, rust builds, soiling). Technically functional. Sale without content. Manufacturer: VEB METAN Model: I Dimensions per cabinet: 500 x 400 x 965 mm (W x D x H) Type: Welded sheet steel \" Auction-ID: A7-46417-366

\" Lot of casting ladles / metal ladles – approx. 500 kg – 4 pieces of batch consisting of 4 casting ladles for molten metals in different designs. Suitable for aluminum, bronze or non-ferrous metal foundries. Equipment • Crane eyes / carrying brackets • Some with inner struts • One pan with lid Condition From stock of a foundry. Sale as shown. Capacity: up to approx. 500 kg Number of pieces: 4 pieces \" Auction-ID: A7-46417-381

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 6739 Auction-ID: A1-45902-86

\" Calibration gauge for tip calipers 0–500 mm Calibration gauge for tip calipers in a wooden case. The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible): 10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mm Total length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipers Measuring range: up to approx. 500 mm Material: steel, ground Reference points: several engraved test distances Design: with threaded holes \" Auction-ID: A7-46417-334

\" 2 pieces of sturdy steel cabinets in a classic workshop design. The cabinets are ideal for storing tools, materials or operating equipment. • lockable (lock available, key not available) • number: 2 pieces • dimensions per cabinet: approx. 1000 x 500 x 1900 mm • material: sheet steel • type: \"Hinged doors \" Auction-ID: A7-46417-409

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 7121 Auction-ID: A1-45902-89

Straightening plate spotting plate 700 x 500 mm Panel size: 700 x 500 mm Solid panel thickness: 55 mm Total height: 880 mm Auction-ID: A7-46417-17

Unused; ATS; rated output 40kw/50kva; standby 44kW/55kVA; P.F. 0.8; RPM 1500; 99L diesel tank; 3 PHASE; altenator type 224D; ATS 100A Aisikai; Genset controller with LCD; 2 batteries; 4 cylinder; Engine type 4-Stroke, V In-line, Water Cool, Electric start; Displacement (L) 3.76; v.v. CE and QC; 6739 Auction-ID: A1-45902-4

\" Calibration gauge for tip calipers 0–500 mm Calibration gauge for tip calipers in a wooden case. The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible): 10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mm Total length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipers Measuring range: up to approx. 500 mm Material: steel, ground Reference points: several engraved test distances Design: with threaded holes \" Auction-ID: A7-46417-333

- Producer MECONAF BV - Gesamtbreite 1.530 mm - Arbeitshöhe 900 mm + - 20 mm - Working width 1300 mm - Length 2500 mm - Roller diameter 80 mm - Roller pitch 150 mm - Motor power 0,75 kW - Voltage / HZ 400 / 50 - Colour 7035 - Location, in stock - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 %

Mit Lichtschranke am Ende des Bandes für Transportstop - Producer MinkDK - Length 1.700 mm - Belt with 1.220 mm - Working width 1.200 mm - Working height 900 + - 30 mm - Length 1.300 mm - FU-Regelung für Feed speed 2 - 10 m/min - Location, in stock - Voltage / HZ 230/50

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-305

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-306

Various models; various sizes; B-choice; from the stock; on 2 pallets Auction-ID: A1-46266-526

In stock on pallet, total dimensions approx. 1200x800x430 mm Auction-ID: A1-45790-476

Various models; various sizes; B-choice; from the stock; on 20 pallets Auction-ID: A1-46266-540

Various models; various sizes; B-choice; from the stock; on 2 pallets Auction-ID: A1-46266-525

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-10

Various models; various sizes; B-choice; from the stock; on 2 pallets Auction-ID: A1-46266-532

In stock on pallet, total dimensions approx. 1200x800x740 mm Auction-ID: A1-45790-474

In stock on pallet, total dimensions approx. 1200x800x430 mm Auction-ID: A1-45790-475

Various models; various sizes; B-choice; from the stock; on 20 pallets Auction-ID: A1-46266-541

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3628

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and state video: https://youtu.be/LVoYiEPbxxU Former Linde full-service machine Width over forks 540 mm Fork length 1,150 mm Battery Li-ION Auction-ID: A1-45451-382

Youtube function video: https://youtube.com/shorts/D1vBDS6kQvo FEM3 mount, for forklifts with 2,500kg-5,000kg load capacity on pallet for loading into trucks FEM dimension 3A Fork length 135-200 cm Auction-ID: A1-45451-1108

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/jkFSkRyY75c - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 80V 5PzS 775Ah, very good performance measured with 82.7V - Clear-view mast without central hydraulic cylinder - 3rd valve; with sideshift - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45451-60

Battery from former Linde Service Very good performance measured at 25.1V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1145

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/_JKycaXsgcw - Former Linde full-service device - Triplex mast with full free lift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Comfort seat Auction-ID: A1-45451-134

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3441

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3704