bag 50 used for sale

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type SA37 DRS71S4/MM07 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 596 - 123 rpm -Power: 0.55/0.055 kW -Hollow shaft: Ø 20 x 120 mm -Protection rating: IP54 -Dimensions: 360/250/H190 mm -Weight: 14.0 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Mosca, belt conveyor with adjustable base from GF strapping machine -Speed: frequency controlled, up to approx. 94 m/min -Strap width: 500 mm -Conveying length: 1000 mm -Drive: SEW-Eurodrive 0.55/0.055 kW, see photo of nameplate -Light barrier: 2 sensors, distance adjustable see photos -Quantity: 1x conveyor belt available -Transport dimensions: 1020/960/H900 mm -Weight: 88kg

Geared motor, electric motor, electric geared motor, spur geared motor, frequency-controlled geared motor, adjustable geared motor, variable speed geared motor -Manufacturer: SEW-Eurodrive, adjustable geared motor -Type RF07 DRS71S4/MM03 i = 4.86 -Drive motor: with frequency converter MM07D-503-00 -Speed: 25 to 280 rpm / i= 11.18 -Power: 0.37/0.074 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 360/250/H180 mm -Weight: 10 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: SEW-Eurodrive, electric geared motor without gearbox -Type SA37 DRS71S4/MM07 -Drive motor: with frequency converter MM07D-503-00 -Motor speed 2900/597 rpm -Power: 0.55/0.055 kW -Shaft: Ø 10 -14 mm, spur gear see photos -Protection rating: IP54 -Dimensions: 240/186/H245 mm -Weight: 8.4 kg

PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Sew Block, line filter interference filter -Type: NF 063-503 HLD 110-500/55 -Voltage: 3x 500/520V 50 - 60Hz -Dimensions: 250/85/H95 mm -Weight: 2.8 kg

Fan, fan, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan, suction fan -Manufacturer: Rosenberg, axial fan axial fan suction fan -Type: ... -Power: 0.52 kW / 1340 rpm -Fan: Ø 500 mm -Transport dimensions: 950/455/H740 mm -Weight: 21 kg/pc.

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Transnorm, belt conveyor type TS 1200 -Speed: frequency controlled, up to approx. 160 m/min -Drive: SEW-Eurodrive 0.055/0.55 kW i= 3.83, see photo of nameplate -Voltage: 380-500V -Brake: 5 Nm -Strap width: 500 mm -Conveying length: 848 mm -Quantity: 3x conveyor belt available -Price per piece -Transport dimension: 860/700/H415 mm -Weight: 62 kg/pc.

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Eurovent, dust extraction fan radial fan type MPR 502 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h -Pressure: 3900 Pa -Connection: Inlet Ø 305 mm -Connection: Output 220 x 160 mm -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm -Weight: 100 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: Commission trolley, floor trolley -Tiers: 2 borders arranged diagonally -Border dimensions: see photos -Chassis: 4 swivel castors -Total dimensions: 810/500/H1645 mm -Weight: 63 kg

Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, picking trolleys, mobile shelves, tray trolleys, embroidery trolleys -Transport trolley: Commission trolley, floor trolley -Tiers: 4 borders arranged diagonally -Border dimensions: see photos -Chassis: 2 swivel castors / 2 fixed castors -Total dimensions: 810/500/H1650 mm -Weight: 69 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 60 mm -Transport width: 500 mm -Shots: M10 -2 sprockets: Ø 41 mm, 10 teeth -Quantity: 4x transport rollers available -Price per piece -Dimensions: Ø 60 x 500 mm -Weight: 3.1 kg/pc.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt roller: transport roller diameter 60 mm -Total length: 500 mm -Holes: 15/12 mm / Ø15 mm M10 see photos -Quantity: 1 piece available -Dimensions: Ø 60 x 500 mm -Weight: 2.2kg

Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, support arm trolleys -Magazine trolley: for open-fronted storage bins, double-sided -Both sides: 90 boxes / total 180 boxes -Swivel castors: with parking brake -Dimensions: 1000/500/H1690 mm -Weight: 70 kg

Transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelves, storage shelf trolleys, visible trolleys, visible storage box shelves -Magazine trolley: for open-fronted storage bins, double-sided -Chassis: 2 swivel castors with brakes / 2 fixed castors -Accessories: incl. storage boxes see photos -Dimensions: 1100/500/H1590 mm -Weight: 59 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker, clothes locker -Manufacturer: Pavoy, steel locker: three-winged, compartment width 30 cm -Width: 930 mm -Depth: 500 mm -Height: 1850 mm -Doors: lockable, without lock -Number: 2x lockers available -Price: per piece -Weight: 51 kg

CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: B&R, control panel, operating terminal, control panel -Type: PowerPanel 500 5PP5:210261.001-01 -Individual components: see photos -Number: 2 terminals available -Price per piece -Total dimensions: 740/730/H210 mm -Weight: 26 kg/pc.

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Ankerwerk Nürnberg AEG, gear motor with brake -Gearbox: Lenze 1 i= 31.5 -Speed: approx. 45 rpm -Engine: Katt type FN112 M 4 kW / 1430 rpm -Brake: Lenze 60 Nm -Shaft: Ø 60 x 120 mm -Dimensions: 940/390/H360mm -Weight: 145 kg

Conveyor belt rollers, transport rollers, roller motor, conveyor belt motor, drum motor, drive drum, motor roller, -Manufacturer: Ackrutat, drive drum drum motor -Type: unfortunately without type designation -Voltage: 380 V -Power: 0.36 kW -Speed: 22 m/min -Drum: Ø 126 mm -Drum length: 500 mm -Shaft: Recording dimensions see photo technical drawing -Total dimensions: Ø 126 x 610 mm -Weight: 23.1 kg

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor, roller curve conveyor -Manufacturer: Transnorm, roller curve conveyor 90° with drive -Type: TS 2712 -Rolls: Ø 54-84 x 500 mm -Speed: 24 m/min -Drive: SEW-Eurodrive 0.37 kW, see photo nameplate -Conveyor width: approx. 500 mm -Transport dimensions: 2260/1030/H410 mm -Weight: 99 kg

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor, roller curve conveyor -Manufacturer: Schmid Fördertechnik, roller curve conveyor 90° with drive -Case: stainless steel -Rolls: Ø 55-85 x 500 mm -Speed: 15 m/min -Drive: SEW-Eurodrive, see photo nameplate -Conveyor width: approx. 500 mm -Transport dimensions: 2000/1200/H830 mm -Weight: 141 kg with pallet

Chassis, electric motor, DC motor, drive motor, traction motor for order picking forklift, drive wheel for electric pallet trucks -Manufacturer: Still, chassis drive motor from forklift EFG 1.5/5004 -Drive motor: GF 146 14/5.6 24 V 4.0 kW -Individual components: see photos -Dimensions: 640/300/H390 mm -Weight: 131 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Still EFG 1.5/5004 -Hydraulic pump: Type 0 510 415 314 -Engine: Type GP 116-14/5.5 24 V 5.0 kW -Dimensions: 320/200/H220mm -Weight: 36 kg

flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Nord, gear motor -Type: SK 5080A--132 S/4 -Speed: 126 rpm -Engine: Nord Type SK 132 S/4 -Power: 5.5 kW / 1450 rpm -Hollow shaft: Ø 60 x 150 mm -Protection class: IP54 -Dimensions: 500/450/H335 mm -Weight: 93 kg

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor clamping rail: 2 pieces -Groove width: 16 mm, length 370 mm -Hole spacing: 460 mm / Ø 16 mm -Dimensions: 505/55/H70 mm -Delivery/Price: complete -Dimensions: 505/55/H70 mm -Weight 3.4 kg/piece

Pressure blower, radial fan, high pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: VEB ILKA, radial fan extraction fan -Type: IRHMF160 / 2 see photo type plate -Engine power: 3.4 kW / 2900 rpm -Volume flow: 0.242 - 0.694 m³/s -Inlet: Ø 160 mm -Connection output: 250 x 160 mm -Fan wheel: Ø 500 mm -Dimensions: 780/490/H1030mm -Weight: 88kg

Fan, ventilator, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, duct fan, -Manufacturer: Lange & Breithaupt, Troca multi-fan type A 500 -Power: 3.4 kW / 1400 rpm -Volume flow: 41 m³/sec -Bolt circle: Ø 555 x 10 mm -Dimensions: Ø 595 x 550 mm -Weight: 90 kg

Fan, ventilator, electric motor, blower, emergency ventilation fan, smoke gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, axial wall fan -Manufacturer: Dietz, axial fan axial wall fan motor type F DR 71 5/4 -Power: 0.37W -Connection: inlet Ø 515 mm -Dimensions total: 640/640/H335 mm -Weight: 13 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, axial fan axial fan -Type: FB050-4EL.41.3P -Power: 0.64 kW -Dimensions: Ø 660 x 180 mm -Weight: 16 kg

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 23 x 9-10 SC 10 RIM 6.50F -Bolt circle: Ø 162 x 20 mm -Bore/recess: Ø 110 mm Quantity: 1 piece available -Dimensions: Ø 570 x 190 mm -Weight: 56 kg

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: -Groove width: 14 mm, length 360 mm -Hole spacing: 460 mm / Ø 16 mm -Number: 4x tension rail available -Price: per piece, minimum order 2 pieces -Dimensions: 505/55/H65 mm -Weight 3.0 kg/piece

Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 53.5/64.9 kW -Fan: Ziehl-Abegg -Operating pressure: max 16 bar Quantity: 1 piece available -Dimensions: 800/390/H880 mm -Weight: 49 kg

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 800/710/H730 mm -Weight: 49 kg/piece

Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg

High-voltage motor, electric motor, three-phase asynchronous motor with squirrel-cage rotor -Power: 630 kW -Voltage: 10500 V -Speed: 1493 rpm -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 54 -Documentation: everything available -Quantity: 1 piece available -Dimensions: 2440/1885/H1500 mm -Weight: 5000 kg

gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Bosch WEG, worm gear motor -Gearbox: Bosch Type FRT 3 842 503 063 -Speed: approx. 36 rpm -Motor: WEG type OD 534 T 0.09 kW -Protection class: IP44 -Shaft: Hexagon 17 x 70 mm -Number: 3x gear motor available -Price: per piece -Dimensions: 270/110/H165 mm -Weight: 4.9 kg/pc.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DKNS 502/2 with bracket -Power: 0.15 kW 11160 rpm -Voltage: 133 V / 200 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.

Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

roll grinding machine, tool grinding machine, grinding machine -Handover: in current condition as viewed -Control: no function, program missing -Manufacturer: Hermes Metis, roll grinding machine type RM-500/2150 -Turning length: 2330 mm -Turning Ø over bed: 560 mm -Grinding drive: 4.4 kW 4000 rpm -Individual components: see photos -Dimensions: Machine 3140/950/H1680 mm -Machine weight: 846 kg -Dimensions control: 750/450/H1500 mm / 107 kg -Total weight: 953 kg

Friction wheel, running wheel for bridge crane, hall crane, assembly crane, workplace crane -Wheel: for crane chassis -Art.No.: 1031 4146 -Type:500h11 Part 1 Crane Chassis -Tread diameter: 500 mm -Wheel intermediate size: 90 mm -Hole: Ø 165 mm -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 540 x 120 mm -Weight: 172 kg/piece

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder, compensating cylinder -Hydraulic cylinder: tie rod cylinder stroke 150 mm -Type: DZL 50N28/ 150 SFSFF 40 -Art.No.: 153/10948 97008023/03 -Piston rod: Ø 28 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 324/116/H105 mm / 335/120/H110 mm -Weight: 5.8 kg/piece

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve Manufacturer: Helmet, helmet rail -Type: Profile 500 -Length: 250 mm -Dimensions: see photos -Quantity: 122x helmet rails available -Price: per piece -Minimum order quantity: 2 pieces -Dimensions: 250/65/H60 mm -Weight: 1.3 kg/pc.

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, helmet roller assembly Manufacturer: Helmet, roller assembly for helmet rail -Type: for helmet 500 -Guide roller diameter: 55 mm -Diameter of carrying roller: 48 mm -Dimensions: see photos -Quantity: 2 pieces available Price: per piece -Transport dimensions: 450/180/H150 mm -Weight: 6.1 kg/pc.

Agitator tank, agitator vessel, agitator tank, agitator vessel, silo system, transport silo, tank, fertilizer storage silo, melting vessel, melting tank -Tank material: stainless steel -Accessories:Level indicator, adapter with filter gauze -Contents: approx. 5000 Ltr -Container: internal dimensions Ø 1310 x 3210 mm -Inlet: Ø 200 mm -Outlet: 745 x 495 mm -Rotary wing detector: Maihak MBA 8 -Container: stainless steel, frame steel -Individual components: see photos -Number: 2x containers available -Price: per piece -Transport dimensions: Ø 1620 x 3210 mm / frame 4285/105/H100 mm -Total weight: 510 kg/pc.

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal, bus terminal -Manufacturer: Wago, 4-channel digital output terminal 3 pieces -Type: 750-504 -Shipping/Price: complete -Dimensions: 70/40/H100 mm -Total weight: 0.2 kg

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 426.000B - 5000 -Art.No.: 295 434 05 -Shaft: Ø 10 x 20 mm -Number: 2x encoders available -Price: per piece -Dimensions: Ø125 x 100 mm -Weight: 0.5 kg/piece

Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm -Weight: 6860 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Hoerbiger, pneumatic cylinder type DZ 5032/200-3 -Stroke: 200 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm -Number: 1x cylinder available -Dimensions: 240/35/H30 mm -Weight: 1.2 kg

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Housing: galvanized steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 100JM31/04/09/22 50Hz 2L D160 -Power: 11 kW 1465 rpm -Fan wheel: Ø 1000 mm -Number: 1x fan available -Dimensions: Ø 1245 x 800 mm -Weight: 237 kg

Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm -Dimensions: see drawing in the photos -Dimensions total: 630/500/H75 mm -Weight: 162 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500x390 mm, height 630 mm -Wall thickness: 65 mm -T slots: slot width 22 mm -Dimensions: see photos / technical drawing -Dimensions: 500/390/H630 mm -Weight: 171 kg