bag 50 used for sale

Inv. Num. : 8953 Type: MULTICUT 500i S Producer: MAS Created: 2011 Parameters: Control system: Siemens SINUMERIK 840 D Maximum turning diameter: 690 mm Max. turning length: 1527 mm Maximum milled profile: 486 x 486 mm Maximum spindle speed: 3500 1/min Maximum workpiece weight: 1600 kg Axis X: 640 mm Axis Y: 370 mm Axis Z: 1600 mm Length: 5400 mm Width: 3950 mm Height: 3760 mm Weight: 22000 kg

General SKU400X1189 LocationBarneveld CEcheck MakeGross Type500 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume640 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck (Bioreactor) Capacity500 Ltr. (640 Ltr.) Vessel sizesø 1000 x 1140 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck OutletDN25 With jacketcheck (7,7 Ltr.) Half coil jacketedcheck Max. temperature—10 / 150 °C With propellor stirrercheck (magnetic drive) Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft377 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.7855 Year of construction2005 Mounted on legscheck and wheels Floorspace1,40 x 1 ...

Transnorm belt conveyor GF 3450-600-500 RA2469 Technical data: Conveyor length (NL): 3450 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0.8 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3450 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of ...

Total Weight: 2,800 kg Output Current: 288 A Output Voltage: 400 V Output Frequency: 50 Hz Rated Power: 160 kW (217.54 hp) Rated (full) power: 160 kVA Constant Power: 160 kW (217.54 hp) Maximum speed: 1,500 rpm

3 Allison Turbine Detroit Diesel Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

Key data: 8000 KW

Diesel Generators Wartsila 2 x 12V32 HFO – 2 x 4.0 MW/ 50Hz Deliver proven, industrial-grade power with these Wartsila 12V32 medium-speed diesel generator sets, currently available in standby condition. Equipment is maintained by the book and thus in good operational condition. Last thorough 48k Service was carried out in 2016 by Wartsila Service for both engines and since then, the plant has been operated about 20’000 hours. Designed for continuous and prime power duty, these units offer a good reliability, fuel flexibility, and choiceed auxiliaries — making them ideal for industrial plants, captive power projects, utilities, as a base load or back-up electric power generation. These units are priced for sale. Contact us today to receive commercial valuation, scope clarification, and inspection arrangements for this 8 MW Wartsila power solution Technical Characteristics  ...

Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you  ...

Demag 3,2 ton x 17 500 mm Kind of: overhead travelling crane Capacity: 3,2 ton Span: 17 500 mm

Presse à injecter électrique NETSTAL 50 T type ELION 500 - 60 Année 2005 - 6000 heures Force de serrage : 50 T - 500 KN Diamètre vis : 18 mm Rapport L/D : 21,7 Pression d’injection : 2350 bars Volume injectable : 25,4 cm3 Poids injectable en PS : 24,4 gr Vitesse d’injection : de 250 à 450 mm/s Distance entre colonnes : 360 x 360 mm Dimensions des plateaux : 920 x 920 mm Epaisseur mini/maxi du moule : 150-450 mm Course d’ouverture : 310 mm Dimensions : 4,36 x 1,66 x 2,05 m Poids : 6200 kg

BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 Item #: Usm-239 Category UHT Plants BRAND NEW TETRA PAK UHT STERILISER PASTERURISER 5000 LPH FOR SALE YEAR 2019 TECHNICAL DATA: Tetra Pak Automated uht for high acid beverages. The heat treatment in the steriliser is base on plate heat exchanger. TEMPERATURE PROGRAM: FOR TEA: 5Brix Heating: 25°C to 140°C (4 seconds) Cooling: 140°C down to 25–80°C FOR JUICE: 12Brix Heating: 25°C to 120°C (30 seconds) Cooling: 120°C down to 25–80°C CONDITION: B

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Height 2260 mm Width 1430 mm Length 2130 mm Weight 1400 kg Capacity 530 l Electrical Supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless Steel, Acid Resistant Agitator Type Paddle Agitators Load 350 kg Product ejection Manually opened flaps, front Loading Pole loading, freestanding Stirrer type Open stirrer Number of shafts Single shaft Comes with a loading column for 200 L battlements.

Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

General SKU415W1308 MakeSiebtechnik LocationBarneveld CEcheck TypeESM 504-1 ks Main Features MaterialStainless steel Volume70 Ltr. Motor22 KW Specified Features - Ball mill Ball millcheck Capacity70 l (220 l bruto) Inlet⌀ 118 Outlet⌀ 118 Motor22 kW, 400 V, 1470 rpm Information No.47542 Year of construction2012 With switchgearcheck Floorspace1.51 x 2.52 m Total height1.55 m Weight2500 ATEX compatiblecheck Extra SpecificationsMaterial: Creusabro 4800 - wear resistant steel With sound proof cabinet Working hours 65 hrs Ball millsSiebtechnikMills > Ball millsBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU413X1251 MakeCelsius LocationBarneveld CEcheck TypeCWR500 Pressure Working pressure2.6 Bar Working pressure jacket2.6 Bar Technical specs Max. temperature140 °C Main Features MaterialStainless steel Motor9.2 KW Specified Features - Continuous dryer Screw dryercheck (screw heat exchanger) Double shaftcheck Continuouscheck Capacity1500 kg/h Product inletDN150 Manhole440 x 330 mm Product outlet250x700 mm With jacketcheck 25 l. Shaft can be heatedcheck Max. temperature140 °C Motor9,2 kW, 400/690 volt, Screw speed6.4 rpm Continuous dryers MaterialStainless steel 1.4301 (304) Information No.610269.C Year of construction2011 Mounted on framecheck With switchcheck Floorspace9,027x1,10 m Total height1,90 m Weight6210 kg Extra Specificationsinternal volume 2x 550 l., , steam heated Continuous dryersNew arrivalsCelsiusDryers > Continuous dryersNew  ...

General SKU364X863 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hoppercheck (for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Information Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switchcheck (as is) With control cabinetcheck (as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm For the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek ...

General SKU322X551 LocationBarneveld CEcheck MakeGero Main Features Materialstone Max.temp.1100 °C Specified Features - Drying oven Drying ovencheck Max. temperature1100 °C Number of compartments:1 Internal width500 mm Internal depth250 mm Electric capacity6 kVA, 400 V Number of doors:1 With fancheck Motor0,25 kW, 230/400 volt, 2850 rpm MaterialGlass, stone Information TypeDRSR-A-200-500/11 No.200801042Drying ovensNew arrivalsGeroDryers > Drying ovensNew arrivalsBrand > Gero What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU438X1385 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor18.5 KW Length1100 mm Specified Features - Stirrer Stirrercheck Shaft length1100 mm Sizes stirring headø 250 mm Motor18,5 kW, 400 V, 2935 rpm Mounted on supportcheck MaterialStainless steel Information MakeYstral Serial266680913 TypeY 18.500 S/GD7-4 TDS Year of construction2013 Floorspace1.00 x 0,41 m Total height2,10 mStirrersYstralMixers > StirrersBrand > Ystral What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300U907 MakeSiemens TypeDiffraktometer D5000 Year of construction1991 LocationBarneveld Floor space1,03x1,03 m Total height1,84 m Weight760 kg Extra SpecificationsThe D5000 can be used to determine the crystal structure of a material through X-ray diffraction. By directing an X-ray beam onto the sample, the D5000 measures the diffraction patterns that arise when the radiation is scattered by the atoms in the crystal lattice. These patterns are analyzed to obtain information about the arrangement of atoms in the crystal lattice. MiscellaneousSiemens - ElmoMiscellaneous > MiscellaneousBrand > Siemens - Elmo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

General SKU312X501 MakeJ. Engelsmann TypeVib speed 500 Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Surface0.5 m2 Size length1000 mm Sizes width500 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m2 Number of sieve decks:1 Sieve sizes1000x500 mm With covercheck InletDia. 195/100 mm Outlet2x 165 mm Drive vibro motorcheck 2x Motor0,30 kW, 230/400 volt, 1500 rpm Sieve perforation0,315 mm With ball cleaningcheck MaterialStainless steel 1.4305 (303) Information Mounted on stainl. st. framecheck With switchcheck Floor space1,80x1,20 m Total height2,00 m Weight350 kgVibro sievesEngelsmannSieves > Vibro sievesBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU397X1148 LocationBarneveld CEcheck MakeDe Dietrich TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume499 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009) Glass Reactors Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 1000 x 1060 mm Dished bottomcheck Dished top sidecheck Manhole300x400 mm Top connectionscheck Outletcheck With jacketcheck (135 Ltr.) Max. temperature— 10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm Information No.54020 / 71431 Year of construction1982 / 2011 Mounted on legscheck Floorspace1,3 x 1,3 m Total height2,74 m Weight2000 kgGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth: -- Machine is ...

General SKU397X1149 MakeDe Dietrich LocationBarneveld TypeSTA 500 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume500 Ltr. Motor4 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009U) Glass Reactors Reactorcheck Capacity500 Ltr. (695 Ltr.) Vessel sizesø 800 x 1060 mm Dished bottomcheck Dished top sidecheck Top connectionscheck OutletDN80 With jacketcheck (135 Ltr.) Max. temperature—10 / 200 °C With propellor stirrercheck Motor4 kW 400 V 1420 rpm (Ex) Speed mixing shaft98 rpm Information No.58632 Year of construction1991 Mounted on legscheck Floorspace1,1 x Total height1,06 m Weight1600 kg Technical specs Extra information135 Ltr. 6 bar —10 / 200 °CGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth ...

General SKU376X935 MakeBecomix TypeDH-500 LocationBarneveld CEcheck Motor Motor power8 kiloWatt Main Features MaterialStainless steel Motor8 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Emulsifiercheck Rotor sizesDia 245 x 40 mm Teethed rotorcheck Without hoppercheck Inlet25 mm and 50 mm Outlet50 mm With mechanical sealcheck Motor8 kW (400 V, 2950 rpm) With variable speed drivecheck (freq controller) Speed2910 rpm. Inline high shear mixers MaterialStainless steel 1.4306 (304L) Information No.070/4-N0003 Year of construction2010 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,6 x 1 m Total height1 m Weight250 kg Extra Specificationsin-line colloid-millInline high shear mixersBecomixMixers > Inline high shear mixersBrand > Becomix What you can expect from Foeth: -- Machine is in working conditio ...

General SKU202X016 MakeABL Anlagentechnik/ OFRU LocationBarneveld TypeASc-500 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume510 Ltr. Specified Features - Distillation Distillation installationcheck Capacitybruto 500l, netto 250l Max. temperature170°C With stirrercheck Motorcheck MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Distillation Capacity510/55l Information No.020113 Year of construction2013 Year of construction2013 Mounted on framecheck With switchgearcheck ( as is) ATEX compatiblecheck Extra SpecificationsWas used to regenerate(recover) the solvent after filtration step before loading into a tray dryer... in this case acetone were captured in the IBCs ,to reduce the footprint of lost solvents...the recovery system will work with similar solvents as wellDistillationOFRUColumns > DistillationBrand > OFRU ...

General SKU430W1391 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity687 l., (500 l.) Vessel sizesDia. 1000x1200 mm Dished bottomcheck ManholeDN350 Top connectionscheck OutletDN25 With jacketcheck With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft95-136 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information No.5065 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace1,30x1,30 m Total height2,40 m Weight1100 kg Extra Specifications- with control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHerma ...

General SKU300U578 LocationBarneveld MakeMemmert BmbH Main Features MaterialStainless steel Volume108 Ltr. Max.temp.220 °C Specified Features - Drying oven Drying ovencheck Max. temperature220°C Number of compartments:1 Capacity108Ltr. Internal width560mm Internal depth400mm Internal height480mm Electric heatingcheck Electric capacity2kW Number of doors:1 With trayscheck MaterialStainless steel 1.4301 (304) Information TypeUE500 No.911229 With switchcheck(as is) Floorspace0,75x0,65m Total height0,87m Weight100kgDrying ovensMemmertDryers > Drying ovensBrand > Memmert What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU250U362 MakeBepex TypeL200/50p No.10427 Year of construction1987 Mounted on framecheck Main Features Motor3 KW Inlet diameter310 mm Width50 mm Specified Features - Roll compactor MaterialStainless steel 1.4301 (304) Roll compactorcheck Roll width50 Roll diameter200 Rolls can be heated/cooledcheck Motor3,0kW,220/380 Volt, 1420 rpm With variable speed drivecheck Roll speed18-90 Rolls can be adjustedcheck With dosing/compacting screwscheck Stöber, type: R65-3115-300-4, Dia: 50mm, pitch: 40mm With motor0,75kW, 220/380Volt, 2780/3335 rpm With variable speed drivecheckStöber, type: R25-2038-K2-075-2 Speed3,1-15,5 With hoppercheck Hopper sizesDia: 310x280mm InletDia: 310mm Information LocationBarneveld With switchcheck With switchgearcheck Floorspace1,6x0,9m Total height1,3m Weight750 kgRoll compactorsBepexCompactors > Roll compactorsBrand > Bepex ...

General SKU371T1118 LocationBarneveld MakeEdwards Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume400000 Ltr. Motor3.7 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:2 Capacity400m³/h With motor2,2kW, 220-240/380-415 With motor1,5kW, 220-240/380-415 Inlet100 mm Outlet25 mm Information TypeA38513935 Mach.No.297 Year of constructionunknown Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace009x0,55 m Total height1,15 m Weight350 kg Extra Specificationsmachine is a 2-stage vacuum pump. Consisting of: Edwards Mechanical booster model EH 500A Edwards High Vacuum Pump model E2M 80 Vacuum pumpsEdwardsPumps > Vacuum pumpsBrand > Edwards What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping  ...

Portable 7-axis coordinate measuring system ROMER Infinite 1.0 SC 5028SC. Measuring range diameter: 2800mm, point repeatability: approx. +/-0.045mm - 0.050mm, volumetric length measurement uncertainty: approx. +/-0.064mm - 0.075mm, wireless communication: Wi-Fi 802.11b/g, battery operation, software base: WinRDS driver compatible with measurement software solutions PolyWorks, PC-DMIS, PowerInspect, Metrolog. Including integrated balancer, transport case, probe set 6mm, 15mm, tip, mounting plate with 3 magnets, calibration bar with calibration certificate. Inspection by appointment possible.

Transnorm conveyor belt GF 820-600-500 RA2471 Technical data: Conveyor length (NL): 820 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 820 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery: w ...

Transnorm conveyor belt GF 1200-600-500 RA2432 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports an ...

Transnorm conveyor belt GF 1060-600-500 RA2472 Technical data: Conveyor length (NL): 1060 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1060 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m  ...

Cutting height: 125x220 mm machine weight ab.: 450 kg Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 500x300 mm work height max.: 100 mm Weight: 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Batch wet mill for the iron-free grinding of mineral suspensions. Lining (Al2O3) completely renewed in 2011. The mill and drive unit (18.5 kW bevel gear motor) are mounted ready for use on a stable base frame. Incl. sealing plug, drain tap / drain strainer and original documentation. Designed for a regrind filling of 3,900 kg and a ball filling of 3,350 kg. There are 2 identical mills available. Available for an extra charge: control cabinet incl. on-site control unit and grinding balls.

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3- 105 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No ...

CNC lathe DMG MORI NLX 2000 SY/500 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of Make: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm Travel in X: 260 mm Travel in Z: 590 mm Travel in Y: +- 50 mm Spindle bore: 65 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 6000 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Tool presetter manual ( HS ) Collet Chuck Hydraulic with Foot Pedal (HS) Collet Chuck Hydraulic with Foot Pedal (GS) Bar Feeder LNS Move S2 30 tool holders Various powered tools Direct displacement measuring system X, Y, Z axis Signal lamp 4 colours Chip conveyor Coolant Setup Operating Instructions

Standard equipment: - Closed machine frame with integrated laser unit - Movement unit for high-precision machining - Gantry drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit Riedel NPP from 2003 - TFT color screen - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Position laser diode - Oil spraying device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 Laser TruFlow 5000 - Maintenance-free turbo centrifugal blower - 250mm lens cutting head

Key data: 510 mm, 3000 mm, 4 St.

HOFMANN AHW 500 YOC 1991 Motor power: 4.0 kW Rated current: 9.5 A Max. planing width: 510 mm TERSA knife shaft (4-knife shaft) Integrated auxiliary stop SUVAMATIC knife shaft protection Joining strip with fastening rail Table length: 300 cm Table height: 84 cm Suction nozzle: 140 mm 4 pcs new knives Drive belt renewed The electrical system was renewed by the previous owner The machine does not have an engine brake. Transport dimensions (approx. dimensions): L: 312 cm W: 140 cm H: 115 cm Weight approx. 900 kg

BINOVA WATER RING PELLETIZER, constructed in AISI 304 stainless steel, for HDPE LDPE LLDPE PC PP PS ABS, horizontal type, throughput rate 800-1200 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 2003, Offered checked and reconditioned, See how we recondition [HERE](.germanplast.eu/pages/what-we-do), availability: 5 weeks time, capacity: 1.500 kg/h, conditions: reconditioned

Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing

This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details.

General SKU241S147 MakeBühler Cobra 501 TypeSRK 440 No.10208703 Year of construction1992 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia.320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt Information With switchgear(as is) Floorspace2,3x1,6 M Total height2,8 M Weight2700 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details.

General SKU061H261 MakeHeraeus Hanau TypeVTR-5036 No.9004800 Year of construction1990 LocationBarneveld Main Features MaterialAluminium Volume45 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying oven(1x) Max. temperature180 Degr. C. Number of compartments:1 Capacity45 Ltr Internal diameter340mm Internal depth500mm Electric heatingcheck Electric capacity1,1 KW, 230 Volt Number of doors:1 MaterialAluminium Information With switchcheck Floorspace0,6x0,7 M Total height0,5 MDrying ovensHeraeus HanauDryers > Drying ovensBrand > Heraeus Hanau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 4s DOOSAN DNM 500II was manufactured in 2016, featuring a table size of 1200 × 540 mm and a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center offers efficient machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500II vertical machining center. Contact us for further details.

General SKU234S120 MakeBühler Cobra 501 TypeSRK 440 No.10310050 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt Information With switchcheck Floorspace2,1x1,5 M Total height2,9 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 4s MORI SEIKI NHX 5000 was manufactured in 2011. It features a dual pallet system with a pallet size of 500 × 500 mm and a maximum pallet load of approximately 500 kg. The spindle speed reaches up to 12,000 rpm, with a tool magazine capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining center we have for sale. Contact us for further details.

General SKU253S172 MakeBühler AG (CH) TypeCobra 201, SKR 440 No.10194572 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 volt MaterialStainless steel Information Floorspace2,1x1,1 M Total height2,7 M Weight2650 KgSand millsBühlerMills > Sand millsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!