134,658 used machines on RESALE, but how to find them? Machine Search
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Danfoss, frequency converter VLT 5000 -Type: VLT 5000 T/C VLT5003PT5B20STR3DLF00A00 C/N: 175Z0046 -Max. power: 3.1 kVA -Dimensions: 260/85/H395 mm -Weight: 6.4 kg
BOWL CUTTER, TVALL TYPE: CRI-50AC Technical description: Serial number: 9.089.403 Speeds: 2 Bowl capacity: 50 Lt Power supply: 380-440V/50-60 Hz Dimensions: 1300 x 1000 x 1350 mm
Very well maintained shrink tunnel , 400 V, 13 KW
Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tool, step claws, low clamps, clamping irons, clamping brackets -Clamping tool: clamp -Shaft: Ø 40 mm -Dimensions: see photos -Total dimensions: 505/100/H145 mm -Total weight: 12.7 kg
Offer 23035 Technical data approx.: - Pressure capacity 30 t. - max. sheet thickness 10 mm - max. punching diameter 105 mm - Punching performance - e.g. Sheet steel : 105 mm in 1.5 mm ; 45 mm in 5 mm - e.g. VA sheet metal : 90 mm in 1.5 mm ; 45 mm in 4 mm - Stroke 7 - 70 mm - Projection 560 mm - Maximum stroke rate 120 h/min - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - with: - Notice table with stops - Foot switch; - Emergency stop button - Punch quick-change device - various receptacles, punches and matrices
Shuffle-mix 500 mixer / aerator Serial: 500-115 2007, Stainless mixer aerator, 500L, mobile frame, 3Ph
Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production
Line SEW Eurodrive NF 085-503 Part No. 08274150 No.0009405 UN : 3x380V IN: 85 C° Connections 35 mm2
Servo drive, controller, converter, controller, controller adapter base -Manufacturer: Siemens, Controller Adapter Base Series 500 -Type: 500-5840 -Dimensions cardboard: 500/250/H180 mm -Total weight: 2 kg
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C87 TE1PV/Stage 3A Engine No.: in production Power: 259 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L1D D41 Gene. No.: C221374934 Generator power: 310 KVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation IG 500 Switch: Generator switch 4 poles with motor drive Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 450 Dimensions of the power unit: Width approx. mm: 1.400 ...
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, drive converter Movitrac -Type: Movitrac 31C055-503-4-00 -Power: 8.3 kVA -Input: 380-500V 50/60Hz -Output: 0-400Hz -Dimensions: 300/170/H215 mm -Weight: 5.8 kg
Key data: 400 , 500 , 400
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 13 072 A 02 14 ECU Engine No.: in production Power: 440 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm: ...
Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe M4L -Max. passage: Ø 500 mm -Peak height: 390 mm -Technical drawing: see photos -Dimensions: 840/140/H850 mm -Weight: 98 kg
The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: sendzimir galvanized Material: Steel Type designation: MRT-50x1,5.20 Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
table diameter: 690 mm table load: 500 / 250 Kg turning speeds: 0,5 - 3,2 U/min Torque: Drehen 1200 Nm spindle bore: 100 mm swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: maschinell : Kippen 1500 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...
Data light barrier, reflective light barrier, light barrier -Manufacturer: Visolux, data light barrier type LS 500-DA-IBS/F2 -12-30 V DC -Quantity: 3 pieces available -Price: per piece -Dimensions: 250/120/H140 mm -Weight: 2.1 kg/piece
Stainless steel tank, upright with 500 litre volume, operating temperature 20°C, operating pressure 16 bar,
Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)
Sumbel Herald 500; good condition; cleaned and tested; Working width 500mm; suitable for hot or cold glue. Sumbel Herald 500; good condition; cleaned and checked; working width 500mm; used for hot or cold glue.
Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Dungs, gas pressure switch orig -Type: GW 500 A4 242485 -Control range: 0.1 - 0.5 bar -Pmax.: 2.0 bar -Dimensions cardboard: 75/70/H80 mm -Weight: 0.4 kg
Shredder HSM FA 500.3 - the paint renovation Specifications Cutting width: 10.5x40-76mm Productivity: approx. 600-650 sheets (DIN A4, 70g/m²) Cutting speed: 210mm/s Power supply: 400 V / 7.5 kW Year of construction: 2014 Price: on request the security level: P-2, O-2, T-2, E-2
Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Towing cube: heavy version -Material: cast iron -Holes: Ø 25 mm -Dimensions: 505/200/H150 mm -Weight: 30 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 500 mm, height 500 mm -Wall thickness: 27 mm -Grooves: 80 x 26 mm -Dimensions: 500/500/H500 mm -Weight: 121 kg
Technical data of the Favretto TU 500 Grinding: Max grindable length: 5000 mm Max grindable width: 1500 mm Max grindable height: 1300 mm Passage between uprights: 1530 mm Load capacity: 4500 kg Approximate weight: 20000 kg Voltage: 380 V Approximate installed power: 60 kW Grindstone: Normal dimensions: 500x203 mm Thickness: 100 mm Rotation speed: 1400 rpm/1' Steerky transverse feeds: 1 to 10 mm/stroke Transverse displacements adjustable continuously: from 0.1 to 6 m/1' Table: Useful dimensions of the support surface: 1200x5000 mm Continuously adjustable speed: from 2 to 30 m/1'
Key data: 400 , 500 , 400
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine: TAD 1641 GE Engine No.: in production Power: 430 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm: 2.460 ...
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm -Die: Ø 200 mm -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg
Baking tray cleaning machine, Fabr. JEROS, Type 5010 - 15
Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 5-10 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 2 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 5,9 kg
THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 90 mm -Type: Mubea 90 5-8 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 116 mm -Weight: 6.7 kg
we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.
Transnorm Rising falling Incline belt conveyor GF 7200-600-500 RA2053 Technical data: Conveyor length (NL): 7200 mm (3800 mm + 3400 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7200 Nominal / outsid ...
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg
Weibert BS-500 Wood band saw Cutting height 450mm Swivel -15° + 45° Motor power: 5KW, 400V, 50HZ Band length 4670mm Suction nozzle 2 x 100mm Saw blade width 6 to 40mm Cutting width left 490mm CE marking WJ-X00200
Lippert belt conveyor GF 1090-650-500 RA1425 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB-5E Year of construction: 2 ...
Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg
Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg
Transnorm conveyor belt GF 2300-600-500 RA2057 Technical data: Conveyor length (NL): 2300 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2300 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentral ...
Transnorm rising falling Incline belt conveyor GF 6000-600-500 RA2066 Technical data: Conveyor length (NL): 6000 mm (4200 mm + 1800 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,33 Drive: SEW gear motor, R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...
maximum number of results exceeded
please refine your search
