bac used for sale

JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as: Tenoning / Finger Jointing / Drilling Mortising / Milling / 4/5 axes profiling. Technical data: Full digital NC axes N. 5 Interpolated linear axes N. 3 Interpolated rotating axes N. 2 Longitudinal X axis 1,800 / 2,200 mm Transversal Y axis 1,300 mm Vertical Z axis 650 mm Length of clamp support table 1,400 / 1,800 mm A axis - Unlimited C axis +/- 180°

Scales / Dough Scales / Baker's Scales Kircher TWProduct DescriptionManufacturer: KircherType: TWWoreee

Heating elements / heating rod for quail Piccolo NEW ( 4 pieces )for quail Piccolo transverse insertfor the proofing chamberRound elements 20mm diameter870/770mm230 volt / 600 WattSee picture for details

Heating elements / heating rod for quail Piccolo II NEW ( 4 pieces )for quail piccolo Year of manufacture until 04/2016for the steam / fermentation chamberRound elements 20mm diameter1250/1160mm400 Volt / 1100 WattFor details see picture

Heating elements / heating rod for quail Piccolo NEW ( 4 pieces )for quail piccolo 1-2 year of manufacture from 04-2016for the fermentation chamberRound elements 20mm diameter580/500mm230 Volt / 600 WattDetails see picture

Heating elements / heating rod for quail Piccolo II NEW ( 4 pieces )for quail piccolo Year of manufacture from 04/2016for the steam / fermentation chamberRound elements 20mm diameter1080/1000mm400 Volt / 1100 WattSee picture for details

Baguette tray 600x400 mm 8 transverse troughs NEW(5 pieces )Made of aluminium 1.15 mmExternal dimensions : W.: 600 mm , D.: 400 mm , H.: 40 mm For details see picture

Baguette tray 780x580 mm 9 transverse recesses NEW(5 pieces )Made of aluminium 1.15 mmExternal dimensions : W.: 780 mm , D.: 580 mm , H.: 40 mm For details see picture 

Baguette tray 600x400 mm 8 transverse recesses NEW(5 pieces)Made of aluminium 1.15 mm with round cornersExternal dimensions : W.: 600 mm , D.: 400 mm , H.: 35 mm See picture for details

Baguette tray 780x580 mm 9 transverse troughs NEW(5 pieces)Made of aluminium 1.15 mm with round cornersExternal dimensions : W.: 780 mm, D.: 580 mm, H.: 35 mm For details see picture

Heating elements / heating rod for quail Piccolo NEW ( 4 pieces )for quail Piccolo 1-2 year of manufacture until 04-2016for the proofing chamberRound elements 20mm diameter680/580mm230 Volt / 600 WattFor details see picture

 Aluminium perforated sheets 3 edge NEW(10 pieces)Aluminium perforated sheets 3 edge 600 mm x 400 mmPerforated sheet 3 edge, edge height 23 mmRound perforation 3.0 mmMaterial thickness 1.5 mmNEWDedetails see picture

 Transport trolley / freezer trolley stainless steel for 60x40 trays NEWwith 18 supportson rollsDimensions :Height: approx. 1810 mmWidth: approx. 465 mmDepth : approx. 600 mmwith castors B: 500 D: 635 mmShelf spacing 89 mm 

rack trolley UNI for Miwe + WP NEWstainless steel for Miwe + WP rack oven18 pads for 58x78 cm and 60x80cm sheet dimensions : W: 67cm D: 82cm H: 183cmWe have different sizes and pads in stock. For large quantities, please inquire 

Pullers with puller trolley for 200cm deep oven NEWSead trolley stainless steel with 10 ALU pullerson roller trolley profile 40x40mm screwedExternal dimensions : W: 251cm D: 64cm H: 184cmInternal dimensions : W: 243cm D: 64cm10 pieces Pullers made of ALU Pullers for 200cm deep ovenPullers dimensions : W: 240cm D: 58cmSee pictureDo we have different sizes Pullers in stockDetails see picture  

Pullers with puller trolley for 160/180cm deep oven NEWThe puller trolley stainless steel with 10 ALU pullerson roller trolley profile 40x40mm screwedExternal dimensions : W: 211cm D: 64cm H: 184cmInternal dimensions : W: 203cm D: 64cm10 pieces Pullers made of ALU Pullers for 160/180cm deep ovenPuller dimensions : W: 200cm D: 58cm Do we have different size pullers in stockDetails see picture 

Pullers ALU for 200cm deep oven NEWextractors made of ALUextractors for 200cm deep ovenPullers dimensions : W: 240cm D: 58cm Do we have different size pullers in stockDetails see picture 

Pullers with puller trolley for 80cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson roller trolley profile 40x40mm screwedExternal dimensions : W: 126cm D: 64cm H: 184cmInternal dimensions : W: 118cm D: 64cm10 pieces Pullers made of ALU Pullers for 80cm deep ovenPullers dimensions : W: 115cm D: 58cm Do we have different size Pullers in stockDetails see picture 

Pullers ALU for 160/180cm deep oven NEWSeoliators for 160/180cm deep ovensPullers dimensions : W: 200cm D: 58cm Do we have different size pullers in stockDetails see picture 

Rung trolley / inclined trolley / transport trolley stainless steel NEWwith 16 supportson wheelsDimensions :Height: approx. 1850 mmWidth: approx. 500 mmDepth : approx. 540 mmBar thickness :15 mm Shelf spacing 92 mmDo we have different sizes transport trolleys in stockDetails see picture

Pullers for deck oven 80cm deep NEUNnew puller / puller for deck ovensPullers made of ALU pullers for 80cm deep ovensPullers dimensions : W: 115cm D: 58cmDeck shop oven, deck oven fits for Miwe, Wachtel, Friedrich and Wiesheu Attachment hook bottomideal for pizza, rolls, small bread, baquettes, croissant etc. We have different size pullers in stockDetails see picture 

 rack trolley for Miwe + WP stainless steel for Miwe rack oven18 padsfor 58x78 cm sheet dimensions : W: 64cm D: 80cm H: 180cmAll trolleys CleanedWe have different sizes and pads in stock. For large quantities, please inquire, see picture, shipping cost, please inquire

 Freezer trolley transport trolley stainless steel stainless steel freezer trolley16 pads for 58x78 cm sheet dimensions : W: 65cm D: 80cm H: 182cm CleanedWe have different sizes and pads in stock. For large quantities, please inquire, see picture, shipping cost, please inquire

Paper Press Carton Press Baler Dixi 4 SProduct descriptionManufacturer: Maschinenfabrik Bermatingen GmbH &, Co. KGType: DIXI 4 Condition: used, functional, baker's conditionPressing force / pressing pressure BARconnection: 220 V / 50 HzMotor kW: 1.5Amp.: 12Ph 1Pressing force 2 tonsSee pictures for details.

Type : ALU STAR 750Year of construction : 2014The baking trays are lowered into the immersion bath by means of a lifting mechanism with basket and lid. Up to 50 two-sided baking trays can be cleaned in one operation, or approx. 30 three-sided trays or approx. 15 4-sided trays.The same dipping process is also used for cleaning aluminium trays and trays. Model Alu-Star 750 with electric lifting device for the basket with max. 150kg load, filling quantity max. 25 box assemblies and 40 3-edge plates with a capacity of 560 liters. See picture for details

Plattenstanze - Plate Punch Bacher 2032 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Druckplattenstanze - Plate Punch Bacher 2032 Serial-No. 12544r Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Druckplattenstanze - Plate Punch Bacher RP22 Serial-No. 2646 For Heidelberg GTO -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

General SKU303U611 LocationBarneveld MakeDYNO-Mill WAB Bachofen TypeECM Poly No.070215 Year of construction2007 Pressure Working pressure4 Bar Main Features MaterialStainless steel Volume8.2 Ltr. Motor24 KW Specified Features - Sand mill Materialsilicon, Stainless steel 1.4112 Horizontal sand millcheck Capacity8,2Ltr. Housing dimensions Dia: 220mm InletDia: 30 mm OutletDia: 30 mm With mechanical sealcheck With jacketcheck Max. temperature5-85°C Motor24kW, 380-420/655-725 Volt, 1477rpm (Ex) Rotor speed1251 rpm Without ballscheck Information Mounted on framecheck With switchcheck With switchgearcheck(as is) Weight1000kg CEcheck Floorspace1,40x0,78 m Total height1,68 m ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new --  ...

General SKU300U582 LocationBarneveld MakeWab Bachofen TypeTurbula T2 No.P640523 Year of constructionunknown Main Features MaterialMild steel Volume2.5 Ltr. Specified Features - Tumbler mixer Tumbler mixercheck Barrel mixercheck Capacity2,5Ltr. Diameter140 mm Length/Depth180 mm With motor220 volt With variable speed drive80 rpm MaterialMild steel Information Mounted on mild steel framecheck Total height0,36 m With switchcheck Floorspace0,45x0,65 m Extra Specifications80 upmTumbler mixersWab BachofenMixers > Tumbler mixersBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU296U566 LocationBarneveld MakeWAB Bachofen TypeKD 45 D No.971227 Year of construction1997 Main Features Volume46 Ltr. Motor44 KW Specified Features - Sand mill MaterialNickel alloy (201) 2.4068, stainless steel 1.4721(heat resistant) Horizontal sand millcheck Capacity46 Ltr Housing dimensions Dia:300x790mm InletDN15 OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor44 kW, 380 volt, 1465rpm(ex) Rotor speed730rpm Without ballscheck Capacityrange 180-1000 l/h Information Total height1,9 m Weight1560 kg Floorspace1,85x1,15 m ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...

General SKU296U565 LocationBarneveld MakeWAB-Bachhofen TypeKD 45 No.760735 Main Features MaterialStainless steel Volume45 Ltr. Motor33 KW Specified Features - Sand mill Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) Horizontal sand millcheck Capacity45 Ltr. Housing dimensions Dia: 290x750 InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor33 kW, 380Volt,985rpm (EX) Rotor speed985rpm With ballscheck CapacityCap. range 180-1000 l/h With pumpPonndorf, PX15 Motorcheck Information With switchgearcheck(as is) Floorspace1,4x1,0 m Total height1,8 m Weight1200 kg ATEX compatiblecheckSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

General SKU296U567 LocationBarneveld MakeDYNO-MILL WAB Bachofen TypeKD 60 No.910820 Year of construction1991 Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor45 KW Specified Features - Sand mill MaterialMild steel, stainless steel 1.4000 (aisi 429) Horizontal sand millcheck Capacity60 Ltr. Housing dimensions Dia: 290x960mm InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor45 kW, 350/660Volt, 1475rpm Rotor speed900rpm Without ballscheck Capacitycap. range 200-1300 l/h With pumpcheck Motor0,37kW,230/400Volt, 1375rpm Information Total height1,8 m Weight1500 kg Floorspace2,1x1,3 mSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to  ...

General SKU226U168 LocationBarneveld MakeE. Bachiller B, S.A TypeMCV-1000-NS Mach.No.5675 Pressure Working pressure1.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2945 Ltr. Motor5.5 KW Specified Features - Conical dryer Conical dryercheck Mixing shaft with ribboncheck Capacity2945 Ltr., working capacity 1000Ltr. Largest cone diameter1845mm Cone height2400mm Dished topcheck ManholeDia: 500mm Stainless steel armcheck Top drivecheck Motor5,5kW, 380/660Volt, 1430rpm(EX) Motor0,75kW,220/380Volt,1390rpm (EX) Cantilevered screwcheck With jacketcheck 79Ltr. (half coil) Max. temperature130°C Bottom outletDia: 300mm Internal side is polishedcheck below 0,6 microns MaterialStainless steel 1.4404 (316L) Information Year of construction1998 With switchcheck With switchgearcheck(as is) Floorspace2,3x2,3m Total ...

General SKU354U878 LocationBarneveld MakeWilly A. Bachofen TypeT2C No.9008109 Year of constructionunknown Main Features MaterialMild steel Volume2 Ltr. Motor0.18 KW Specified Features - Tumbler mixer Tumbler mixercheck Barrel mixercheck CapacityUp to 2 Ltr. DiameterDia: 130 mm Length/Depth195 mm With motor0,18kW, 220 volt With variable speed drive22-96 rpm With safety gatescheck plastic shielding MaterialMild steel Information With switchcheck Weight30 kg Floorspace0,56x0,47 m Total height0,40 mTumbler mixersWab BachofenMixers > Tumbler mixersBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. DOUBLE - X= 2400mm ; Y=650mm ; Z=1000 - N.2 heads type T2 - Spindle power 7.5Kw - rpm 0 - 18.000 - Max/min pieces length 150/2400mm - Loader type CSF2 - Year 2002 - s/n AB004 - Complete with manual and CE declaration

Used bachiller model PC-200 stainless steel vacuum mixer. 338 litre total capacity, 126-200 litre working capacity. Mixing bowl approximately 866 mm diameter x 650 mm straight side. Flat top and inverted dished bottom rated full vacuum. Stainless steel jacket rated 3 bar pressure. Anchor agitator with teflon scrapers driven by 2.2 kw 220/380 volt 3/50 1415 rpm or 2.55 kw 440 volt 3/60 1715 rpm motor through sabre model mas55df gearbox 69:1 reduction ratio. Approximately 220 mm diameter dispersion blade mixer direct driven by 7.5 kw 380 volt 3/50 1450 rpm or 8.6 kw 440 volt 3/60 1755 rpm motor. Lid raised and lowered by 0.55 kw 220/380 volt 3/50 1400 rpm or 0.63 kw 440 volt 3/60 1695 rpm hydraulic power pack. New 1987.

- Working range / cutting width approx. 2500 mm - Working range / cutting length at approx. 8 m - Control BACH type MyBach - Track gauge approx. 2850 mm - Plasma torch with height adjustment - Plasma source KJELLBERG Hi FOCUS 280 i Plus - Cutting current at 100% ED 10 - 280 A - Cutting range steel approx. 5 - 60 mm - Cutting range aluminium approx. 5 - 30 mm - Cutting range stainless steel approx. 5 - 30 mm -Auto. Gas console - Connection 400 V - Extraction table with extraction system TEKA 12 x 2 m - Extraction system TEKA FC 4 H with spark separator - Weight approx. 8 T

SECOND HAND 5-AXIS CNC WORKING CENTER BACCI MOD. TWIN JET - strokes: X-axis 5400 mm Y-axis 1300 mm Z axis 650 mm A-axis 360° B-axis 260° - head type 2+2 (7.5 + 7.5 Kw) - chuck ER 32 - spindle speed 12000-24 rpm - n. 10 pneumatic clamps - n. 1 table Tgv - Cn Osai - yaskawa drivers - PITAGORA software - n. 1 Becker mod. PICCHIO 100 mc vacuum pump - Cabin (n.4 sides + roof) - volt. 380/50 - matr. 524 - CE Rules (Year 2008)

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

SECOND-HAND 5 AXIS CNC WORKING CENTER BACCI MOD. SMART – CE RULES - strokes: longitudinal axis x 1500mm transversal axis y 1800 mm vertical axis z 1000 mm. axis b unlimited axis c 400° - cn osai - type head 2+2 - rpm 0-24.000 - vacuum pump - cabin - volt. 380/50 - sn 120 - year 2001

SECOND-HAND 6 HEADS LINEAR COPYING SHAPER AND SANDER BACCI MOD. FC6 2500 – CE RULES - units 1-2 milling units - units 3-4 sanding units - units 5-6 sanding units - working length mm. 2500 - working height mm. 180 - n. 8 locking cylinders - cabin (4 sides + roof) - year 1999

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996

SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI AND SANDING UNIT TYPE T4MO 250 - spindles center distance 250 mm. - max. working lenght 1250 mm. - knives diam. 35 mm. - milling motor 11 Kw - longitudinal sanding unit - year 1999 - CE RULES

Used bread roll line BACK TECH, type: Mega-Star -in bakery condition- For Kaiser rolls - 5 rows - Head machine Mega-Star - Pre-proofing cabinet with Vario-Star moulded pastry system - Post-proofing oven CombiStar - 5 rows - Weight range: approx. 30 - 125 g - in stainless steel version - Computer control - Settling on sheets (5 rows x 9) - Condition: Good, ready for immediate use Viewing and test run are possible by arrangement.

max tenon width: 115 mm + thickness min and max tenon thickness: 0-42 mm min and max tenon depth: 10-45 mm Table adjustments: vertical: 80 mm tilting upwards: 0? - 15? tilting downwards: 0? - 30? side tilting: 0? - 20? fence on table for mitre positioning cutter spindle motor: 3 kW motor for drum rotation: 0,75 kW

Puller trolley with pullers for 60cm deep oven NEW Puller trolley stainless steel with 10 ALU pullerson roller trolley profile 40x40 mm screwedExternal dimensions : W: 101cm D: 84cm H: 180cmInternal dimensions : W: 93cm D: 84cm10 pieces Pullers made of ALU Pullers for 60cm deep ovenPullers dimensions : W: 78cm D: 90cm We have different large pullers in stock for details see pictures.

Ride-on scrubber dryer Kärcher Professional B 250 R + D100 Time 2 years is with us stock so that not worked therefore does not work 2 years ago has run time dem is in stockProduct description:? Manufacturer: Kärcher? Model: B 250 R + D100? Condition: used, tested? Operating hours: 927 hours? incl. a roller brush with a working width of 100 cm? is equipped with a 250 l water tank? is ideal for cleaning larger areasSee pictures for details

Counter Tray / Display Tray 600x400x10 mm NEW! ( 10 pieces ) Counter tray / display tray NEWAus aluminium 0.9 mm thick silver with 4 edgesExternal dimensions : W.: 600 mm, D.: 400 mm, H.: 10 mm See picture for details