bac used for sale

weight: . kg taper MK: .. Different jaw sizes and makes. Price information is not possible without a visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dairy Machinery UK officially offers E-SPIN Dairy Centrifuges In the regions of United Kingdom ,Ireland and Greece. We offer sales, installation, maintenance and stock holding of spare parts for quick response to all of our customers. Whenever it is necessary to separate liquids or remove ultra-fine particles, and when traditional filtration methods reach their performance limits, disk stack centrifuges are exactly what you need to achieve the best results…. Trailblazing designs, consistent and innovative research, superior materials and complete sharing of expertise, thanks to a lean and flexible structure: these are the key ingredients in our approach. They allow us to focus directly on our most important objective: maximum machine efficiency performance and total satisfaction for you. Al components are manuractured to the highest quality and safety standards.  ...

SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille

Laboratory bead mill Manufacturer: Bachofen AG Type: KDL No.: 920235 Power: 1.85 kW in explosion protection shear tools in ceramic very good condition with various tools and spare parts LBH mill: 650 x 650 x 520 mm LBH box: 600 x 400 x 430 mm

max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPX Bactofuge for Milk Make : SPX Model : SE 355 BX -03 P2 Capacity : 10,000 Litres per hour Y.o.m : 2014 Skid mounted Condition : Very Good Included : Tools , Manual book, control panel HMI touch screen

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

Power supply, converter, converter, power supply unit, Smart-UPS, spare battery -APC: Back-UPS HS 500 -Connection: 230 V/50-60 Hz -Active power: 300 W -Apparent power: 500 VA -Price: per piece -Number: 3 pieces -Dimensions: 375/225/H105 mm -Weight: 7.1 kg

- Working range / cutting width approx. 2500 mm - Working range / cutting length at approx. 8 m - Control BACH type MyBach - Track gauge approx. 2850 mm - Plasma torch with height adjustment - Plasma source KJELLBERG Hi FOCUS 280 i Plus - Cutting current at 100% ED 10 - 280 A - Cutting range steel approx. 5 - 60 mm - Cutting range aluminium approx. 5 - 30 mm - Cutting range stainless steel approx. 5 - 30 mm -Auto. Gas console - Connection 400 V - Extraction table with extraction system TEKA 12 x 2 m - Extraction system TEKA FC 4 H with spark separator - Weight approx. 8 T

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

-electrically heated, heat output approx. 70 kW for temperatures up to 200 C -Titanium control

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996

weight: . kg taper MK: . height: 700 mm flute distance: 255 mm thickness of jaw: 80 mm Jaw extension with claw boxes for carousel latheJaw height 80 mmJaw width 80 mmGroove spacing 255 mmHeight 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm

Various well-preserved face plates Various dimensions

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

cutting width:2500 mm Numbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kW length:6000 mm control:KS 20 A Messer Griesheim Documents:vorhanden

table width:2300 mm table length:7000 mm burner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden

Universal Mixer Stephan Bäcker Boy BB100 - Baker Mixer Stephan - Model Baker Boy BB100 - 100 litres - 11 kW - 24.5 A - 380 volts - Shell diameter: ø65cm - Boiler interior height: 39cm

Three almost identical vertical agitator bead mills are available. 1) KD15, year of construction: 1980s, flour hopper: 15l, motor power: 17.5kW, rotor speed: 1500rpm, max. temperature: approx. 85°C, machine dimensions X/Y/Z: approx. 1200mm/800mm/1700mm, weight: approx. 1000kg. 2) KD15, year of construction: 1980s, flour container: 15l, motor power: 17.5kW, rotor speed: 1500rpm, max. temperature: approx. 85°C, machine dimensions X/Y/Z: approx. 1200mm/800mm/1700mm, weight: approx. 1000kg. 3) KD20 BC, year of construction: 1980s, flour container: 16.5l, motor power: 17.5kW, flour capacity: 70l-500l/h, flour body diameter: 0.5mm-2.5mm, machine dimensions X/Y/Z: approx. 1000mm/800mm/1300mm, weight: approx. 700kg. Including paint pumps. On-site inspection is possible.

faceplate diameter: 500 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: . kg taper MK: . height: 350 mm flute distance: 255 mm thickness of jaw: 80 mm Jaw extension with claw boxes for carousel latheJaw height 80 mmJaw width 80 mmGroove spacing 255 mmHeight 700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Bacci Model: MASTER/CUT Year of Manufacture: 2012 Voltage (Volts): 380 V Frequency (Hz): 50 Hz Power (Kw): 24 kW Weight (Kg): 6000 kg Find more here - / Contact us at -

Bread line baking technology built in 2021 consisting of dough divider, ribbon rounder, intermediate bread proofer and bread long moulder is currently for sale. Bread plant built in 2021 consisting of: - Dough divider bread dough divider machine Soft built in 2021 - Ribbon rounder Rounder built in 2021 - Intermediate bread proofer - Bread long scooter Combi 600 built in 2020

ATEX calibrator disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2011 ENGINE 1 TECHTOP 5,5 kW 50 Hz 975 rpm Equipment configuration ATEX Condition As is Made by BACHILLER

ATEX air micronizing mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High efficiency equipment, very suitable for the micronization of all types of powdery products. Includes bag filter reference C9905 Material 316/316L stainless steel Technical features Model JET-MILL MSB305 Year of manufacture 2004 Equipment configuration ATEX Condition As is Made by BACHILLER

Calibrating disintegrator mill manufactured by BACHILLER in stainless steel, model MDCB 300. Equipment for the disintegration of agglomerated products, unification of particles for bulk solids and granulation of wet products. Productions from 50 to 5,000 Kg/h. Material Stainless steel Technical features Model MDCB 300 Year of manufacture 2004 ENGINE 1 FIMM 4PE80 B 0,75 kW 50 Hz 1990 rpm Condition As is Made by BACHILLER

BACCI FC 8 2500 linear milling machine Working length 2500mm Working width 200mm Working height 180mm Number of units 8 Milling 7.5kw Milling 7.5kw Milling 5.5kw Milling 5.5kw Grinding/milling 4.5/3.3kw Grinding/milling 4.5/3.3kw Sanding 3kw Sanding 3kw Hydraulic feed Working speed 0-15m/min Return speed 50-100m/min Year of production 2004 CE Certified Machine weight 5100kg

Description GEA Westfalia Bacterial Remover ( Bactofuge ) for the dairy industry. This machine is used to remove the bacteria from the raw milk providing a longer shelf life and assurance on cheese cultures activating in a better manner. The machine was purchased in 1999 and has been working until 2025 with all the services required and care keeping this machine in very good working condition. Technical Details : Make : GEA WESTFALIA Model : CND 20-01-076 Year of Manufacture: 1999 Serial Number : 1720 063 Usage : Bacterial Removal Capacity : 7500 L/h Tools : Included Service : 2025 Control panel : included

BACCI horizontal copying lathe mod. TC4O - 4 working positions -Cabin - Wheelbase 180 mm. - Complete with manual

Manufacturer: BAC (Spain) Model: F-150-10-150 Type: Ball Valve Size: 6" (DN150) Pressure Rating: 150 lbs (ANSI Class 150) Material: • Valve Body: CF8M Stainless Steel (AISI 316 equivalent) • Ball: 316 Stainless Steel • Gasket: PTFE (Teflon) Connection: ANSI Flanged Ends

Size: 1400 mm Equipments: Register punch Good condition

Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwards xx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards

CNC Portal Flame Cutting Machine Manufacturer: Bach Type: ACK-2D Year of Make: 2006 CNC Control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel burners

BALESTRINI 5-axis machining centre mod. BIG IDEA – CE compliant - Axle travels: X 1600 mm. Y 3000 mm. Z 700 mm. A Unlimited C 400° - Maximum dimensions that can be processed on two benches simultaneously 2800 x 1100 x 700 mm - Maximum dimensions that can be worked on an alternating cycle bench 1300 x 1100 x 700 mm - LS 44con head n. 4 x 7.5 kw air-cooled Colombo electrospindles - 18,000 rpm - N. 2 Becker vacuum pumps 100 mc/h - NUM numerical control - Alphacam dongle -Cabin - Year 2005

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

Contouring machine milling sanding 8 heads BACCI mod. FC8CN - CE compliant - Unit 1-2: milling 15 Kw - Unit 3-4: milling 11 Kw - Unit 5-6: milling/sanding 4.5/3.3 Kw - Unit 7-8: sanding 3 Kw - Working height 180 mm. - Working length 2500 mm. - N. 8 pneumatic pressers - Motorized pressing frame - NC OSAI control - Yaskawa drives - CAM210 Program - Cabin on 4 sides - Year 2001