bac used for sale

Micro button Manufacturer: Dage Type: Microtronic 22 The universal device for the connection techniques usually used in microelectronics. In many gradations, to changing measuring arms for the pulling test are easily (up to max. 10 kg). Switch can be selected between destructive and non-destructive testing. For the non-destructive test, the maximum assembling force thumb wheel switch can be limiting. The haul-off speed is infinitely adjustable up to 10 mm / s. The readings are analyzed and document formats through the external printer. The measured values are displayed in grams. Technical data Measurement types: Pul-tests/shear test Test modes: destroying / Nichtzerstörend Additional functions: "Overheight-test" (finding great Loophöhen), "keyword test"(Festigkeitprüfung von "Stich-Bonds") Test memory capacity: up to 9999 tests  ...

1 x Fanuc Back Plane 3 Slot A05B-2316-C105 1 x Fanuc A16B-3200-0042/05B900514 Board 1 x Fanuc A16B-1 212-0871/17C906140 Power Supply Board Alternative search terms A05B2316C105 A16B3200004205B900514 A16B1212087117C906140 A16B-3200-0042 A16B-1212-0871 A16B12120871.br/> .br>.br/>>A16B32000042.br/>.br/>.br/>.br/>.br/>.br/>.br/>.br/>.br/>

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

Manufacturer: KRONES Type: K405-xxx Model: 960-16-5-5 YOB: 2003 Performance: 16,000 bottles/hour Running direction: RM clockwise feeding: linear - straight Aggregates: Agg 1 PWL460, AGG 2 PWL 300, AGG 3 donation unit Bottle table: servo Guiding: 1 x retaining infeed starwheel, 1 x discharge retaining starwheel Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, wrap around Machine dimension: L = 3, 00 m x W = 2, 20 m without partly overlapping of the unit and discharge extension.

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 1.000 liters NEW! Measurement und weight: Diameter: 920 mm Total height: 2150 mm Cylinder height: 1500 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra ch ...

Spuelmaschine / Glaeserspuelmaschine backService Milbrandt Model: BSM 350 easy and easy to use! Stainless steel performance 2 min Spueldauer 2 Glaeserkoerbe 400 x 400 Power: 30 Koerbe/hr. with drain pump spueling agent and clear-spreader TOP Price = Performance Optinal: - Base - Koerbe Immediately Available! Now NEW with attractive financing!

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 2.000 liters NEW! Measurement und weight: Diameter: 1110 mm Total height: 2650 mm Cylinder height: 2000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra cha ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 3.000 liters NEW! Measurement und weight: Diameter: 1110 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra c ...

Spuelmachine / Hoods backService-Milbrandt The TOP Model! Model: BSM 857 Stainless steel performance Powerful and Universal Sprout Machine 1.5 and 3 min Spueldauer 1 universal basket, 1 plate basket 500 x 500 and cutlery insert Power: 20 and 40 Koerbe/hr with drain pump sprouts and clear-spreaders dosing TOP Price = power ! Optional: - Water enath - Drain tables and inlet Ttices - Hose pendulum shower - Koerbe --- Our TOP model! --- available immediately! Now NEW with attractive financing!

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 5.100 liters NEW! Measurement und weight: Diameter: 1610 mm Total height: 3260 mm Cylinder height: 2490 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra ...

Spuelmachine / Tableware backService-Milbrandt The TOP Model! Model: BSM 500 Easy to use ! Powerful and Universal Sprout Machine 3 min Spueldauer 1 plate basket, 1 universal basket 500 x 500 and cutlery insert Power: 20 Koerbe/hr. with drain pump sprouts and clear-spreaders dosing TOP Price = performance! Optional: - Wasserenthaerter - 230V - Base - Koerbe --- Our classic ! --- available immediately! Now NEW with attractive financing!

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 6.150 liters NEW! Measurement und weight: Diameter: 1600 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra cha ...

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 7.800 liters NEW! Measurement und weight: Diameter: 1800 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on ext ...

Type: K728-1xx Model: 720-12-4-4 YOB: 1997 Performance: 18,000 bottles/h Running direction: clockwise feeding: straight parallel Aggregates: Agg 1 PWL 370, AGG 2 PWL 300 Bottle table: cam Guiding: infeed 2 x, 1 x discharge Label L =: min. 40mm, 130mm Bottle diameter: min. 50mm, 110mm Bottle height (H): min. 150mm, 350mm Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, neck Machine dimension: L = 2, 40m x W = 2, 30 m without partly overlapping of the unit and discharge extension.

Storage tanks outside marbled for wine, water, fruit juice, schnapps with cooling jacket 10.250 liters NEW! Measurement und weight: Diameter: 2060 mm Total height: 3650 mm Cylinder height: 3000 mm Material: V2A - AISI 304, 1.4301 Surface Upper body: V2A= 304, inside IIID outside marbled Cylinder tank: V2A=304, inside IIID, outside marbled Lower bottom: V4A=316, IIIC=2B marbled Upper body: Conical top 1 x ventilation and exhaust connection DN50 2 x crane eyes Cylinder tank: 2 x ladder hook 1 x manhole 444 x 312 mm pulled out to the front, can be swiveled with bracket and holder 1 x sample valve DN 15 (on extra charges) 1 x level indicator with bar and scale 1 x immersion socket for temperature (on extra charges) 1 x thermometer digital (on extra charges) 1 x clear outlet DN 50 with butterfly valve, with lid (on extra  ...

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

CNC carousel lathe FKD 30 CNC control: Siemens 840D sl Machining-range: diameter 3500mm Working height: 3000mm Workpiece weight: max. 25 tons Driven tools: speed 0-3000 rpm Tool holder: ISO 50 for milling and drilling, Capto C8 for turning Faceplatespeed: 0 - 150 rpm Pickup station: 5 places. Filter system: 3000 liters incl. high-pressure pump 25 bar Chip conveyors: 3 items Remark: 2column carousel vertical lathe with traversing cross beam (W-axis adjustable) Support (X-axis) with one ram (Z-axis, ram 300mm x 300mm) for turning and milling with driven tools C-axis (faceplate) with master-slave bracing – zero backlash Manufactured in the EU

8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading, Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo

Roundness Tester Brand: Taylor Hobson Type: Talyson 3 Year of construction: 1974 Operating instructions Calculator Data backup discs All information without guarantee

Status: As good as new Manufacturer: Pfeiffer Type: TMH 064 Model No.: PM P02 366 Comment To operate only with appropriate backing pump and control. Shipping time: On request; ready for operation

130 lfm shelf shepherd type R3000 Used goods, as good as new, see pictures Height 2.5 m Depth 80 cm Load/compartment 250 kg Field width approx.128 cm Negotiation price: € 14,660,-- net from stock Offer consists of: 101 pcs. stand or frame, 2.5 m, galvanized 600 pcs shelves, 250 kg load/compartment, galvanized 34 St. Cross Associations for Stiffening. 6 levels per field (several are of course possible at an extra cost) Also available with a field width of 100 cm! Other compilations possible. Heights 2.5 m or 3.5 m available. Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms ...

Smicon PT 1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Former list price 9.900EUR

Waste Baler BTS-MF300LH The BTS-MF300LH and BTS-MF500LH Low Height Waste Balers are ideal for compacting loose cardboard, paper, film, plastic and metal containers and many materials more. The waste balers impressing with their low height, ease of use and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Bale weight output of up to 340 kg - Compact and low design with only 1986 mm height - Suitable for baling of cardboard, film, clothes and many materials more - Automatic bale cycle - Retaining claws to prevent spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 20 Ton Motor: 2.2 kW 16 Amp Power supply: 220-230 V (1 Phase) Machine size: (H x W x D) 1986 x 1800 x 1100 mm Transportation height: 198 ...

30 lfm shelf shepherd type R3000 Used goods, as good as new, see pictures Height 2.5 m Depth 80 cm Load/compartment 250 kg Field width approx.128 cm Negotiation price: € 3,520,-- net from stock Offer consists of: 24 pcs stand or frame, 2.5 m, galvanized 144 pcs shelves, 250 kg load/compartment, galvanized 9 St. Cross Associations for Stiffening. 6 levels per field (several are of course possible at an extra cost) Also available with a field width of 100 cm! Other compilations possible. Heights 2.5 m or 3.5 m available. Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and ...

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

Bush two stage pumps stand: data pump status: type: BNV 1000 A Vacuum: mbar (abs.) 0.005 Data backing pump: Type: NC0400B suction volume: 400 m³/h Discharge pressure: 0, 05mbar (ABS) Data booster: Type: WV1000B Suction power: 1000 m ³/h Discharge pressure: 0, 005mbar (ABS) Condition: tested, serviced (good condition) Includes: vacuum pre-filter, oil filling Warranty: 3 months; ready for operation

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank with red food safe munkadur coating with cooling jacket and with isolation With new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 8.000 Litre Measurement and Weight: Total Height: 4900 mm Tank Body Height: 3625 mm Diameter: 1900 mm Weight: 2100 kg Uni 4850 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10 +40 °C Year of construction: 2000 Lining: Akorrosit EL 15 p” On cylindrical part two cooling jacket, test pressure 2 bar, depressurizes, 5,8 m2 cooling surface Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms and jacket 8 mm wall thickness. Container outside completely isolated with ...

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 11.500 Litre Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with scre ...

Reiser / parkland SCH 212/5 GM 150 Mowing/mulching and simultaneous collecting of grass, leaves, scrub, horse droppings, etc. Heavy, sturdy design: combination of truck chassis and superior flail, working width 1500 mm, container volume 5 m³, hydr. high dump (2,200 mm) as well as soil drainage through rear tailgate. Special features: 3 x adjusting possible hose rupture backups in the telescopic cylinders 11-speed adjustable cutting height 0-125 mm incl. ABE (General permission of operation) More mowing container stock!

Used dough spiral mixer DIOSNA, Type: SP 120 D -in Bakery condition- - for 120 kg dough or 75 kg flour - mixing arm in stainless steel - bowl in stainless steel - 2 timers - 2 speeds - 1 backward gear - emergency switch off - bowl diameter: 750 mm - dimension: W 800 x D 1.270 x H 1.300 mm - total weight netto: approx. 330 kg - el. connection: 380 V, 50 Hz, 3/N~, 16 A - condition: very good The mixer is checked and testet. It is in a very nice condition and ready for operation. Inspection and test run are possible at every time.

<b>Features:</b> Used telescopic belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged Color: Blue 2 pcs in stock Price per piece <b>Technical data:<b> Manufacturer: Budde Built: 09/11 Model: TGF03 Total length: 14,530 mm Funding length: 14,000mm Length retracted: 5,000mm Length Extended: 14,000mm Total width: 1.240mm (incl. control cabinet) Width: 990mm Belt width: 600mm Condition: good (used) Belt type: Smooth Height: 750mm Weight: 2.200mm Incl. counterweights at the back. <b>Telescopic belt conveyor</b> The telescopic belt conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal operation. During transport, the telescopic belt conveyor can convey sensitive and differentl ...

GS12 - used approx. 26 m³ / 26,000 litres steel tank, gravel filter, pressure tank, water cistern. The container is used and in good condition. capacity: 26.2 m³ / 26,200 litres material: steel tank, pressure tank 6 bar outer dimensions: approx. Ø 2.90 m x height 5.70 m inner dimensions: approx. Ø 2,80 m x height 3.80 m weight: 6 tons output: 42 m³/h year of production: 2000 comm. nr. 22857/3 other: painted blue, threefold epoxy resin coating inside Aboveground pressure tank made of steel, standing vertically on four feet, with two acces holes DN500, one DN300, former gravel filter. Incl. flanged / welded nozzle floor with screwed-in filter nozzles, inner mud funnel, all required connections for untreated water inlet, treated water outlet, backwash in- and outlet and ventilation. This steel tank can be used as gravel filter for filtration, de-icing and  ...

ISO refrigerated container 20ft standard box, manufactured to ISO 1496-1 Type: 22R1 State - used and processed (on request new paintwork at an extra cost!) - Current PTI check - CSC approval - ready for immediate use Visit of our offered containers is possible at any time on site! Color Pure white RAL 9010 TECHNICAL DATA - Dimensions on the outside: (L x W x H) 6,058 x 2,438 x 2,591 mm - Dimensions inside: (L x W x H) 5,412 x 2,292 x 2,300 mm - Volume: 36.5 m3 - Weight: 2.88 t - Payload: 21.12 t - Temperature range: -25°C to +30°C - Refrigeration carrier: R134a - Power: 6-10 kW/h (indicative! Real values depend on several factors.) - Cooling unit: Carrier Streamline (2006 built), 380-460 V, 50-60 Hz, 5-pin plug/CEE 32A - Transportable and crane-capable - PTI check (= Pre Trip Inspection) function check - CSC safety approval SPECIAL USE / CONVERSION (on  ...

7 x LETTERPRESS - NUMMERATORS FOR ZYLINDER & TIEGEL 1x straight, 6 digits, backwards, small numbers 5x straight, 7 digits, backwards, big numbers 1x straight line, 5 digits, backwards, small numbers

Technical data: -Compressive force 100 t -Throat 320 mm -Wide stand below the Guide 400 mm -Table size approx. 850 x 610 mm -Discontinued diarrhea hole in the table 335 / 300 mm -thickness of the table clamping plate 90 mm -gr. Height approx. 300 mm -Plunger area 600 x 335 mm -Adjustable height of the RAM 80 mm -Stroke adjustment 10-130 mm -Emissions er hub in the RAM 32 mm -Speed continuous operation approx. 56 / min -Drive 400 V / 11 kW -Space requirement approx. B H 1900 x 2800 X 2200 mm -Weight approx. 9000 kg Starring:-UVV press backup controller PREVENTA -Hydr. + pneumatically actuated clutch -LUTEX auxiliary braking system -Central lubrication

Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...

100 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 6,220,-- net from stock Offer consists of: 78 pcs stand or frame, 2.5 m, galvanized new 462 pcs. shelves, 150 kg load/compartment, galvanized used 26 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or ...

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die

Technical data: -maximum cutting width 3050 mm -maximum cutting capacity at 45 KP / mm² 4 mm -hydr... Cutting angle adjustment - number of holders of 18 PCs -Speed up to 24 / min -front angle stop 1100 mm -3 PCs front support arms 750 mm -mot. Backgauge positioning control 5-1000 mm - sheet reversible - cutting line illumination -E - foot switch -Rear area protection with light barrier -Drive 400 V / 9.5 kW -Space requirement approx. B 3900 x H 1850 X 2100 mm -Weight approx. 5.7 t

25 lfm shelf shepherd type R3000 Ne- and used goods, see pictures Height 2.5 m Depth 40 cm Load/fold 150 kg Field width 128 cm Negotiation price: € 1,560,-- net from stock Offer consists of: 20 pcs stand or frame, 2.5 m, galvanized new 114 pcs. shelves, 150 kg load/compartment, galvanized used 7 St. Cross Associations for Stiffening 6 levels per field (several are of course possible at an extra cost) Field width also available in 100 cm! Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or o ...

Cutter Kilia EX3000RS 90 L, in good used and functional condition. Completely made of stainless steel, 90 litre bowl, 6 knife head, mixing gear forward/backward, 2 knife speeds, 2 bowl speeds, electrically operated cutter lid. Dimensions W/D/H 150/130/130 cm. Connection values 400 volts, 29 kW. Workshop-tested, ready for immediate use. More on request.

48 lfm pallet rack Stow Used goods, see pictures Height 4.6 m Depth 110 cm Beam length 3.9 m Load/compartment 3000 kg Frame blue, new Carrier orange, used goods Negotiation price: € 3,100,-- net from stock Offer consists of: + 13 pcs. frame pre-assembled, new, depth 110 cm, height 4.6 m + 72 pcs. carrier, used goods, length 3.9 m, 3000 kg load/compartment + 144 pcs. Mount fuses + 26 pcs. concrete anchors Load signs Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from v ...

McIntyre 600 CAT Shear Cat shears are powerful enough to deal with a wide range of operations including the cleaning of automotive aluminium scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and the handling of all non ferrous separations. VERSATILE The 600 CAT features a blade guard system which gives good visibility to the operator and acts as a hold down to prevent material kick back. The machine is foot pedal operated and the jaws return to the open position once the foot pedal is released to increase safety. Wheels are fitted as standard, and forklift points have been included on the body of the machine to ensure that it can be safely lifted both within the yard and during transportation.

Working width: 3050 mm sheet thickness: 6 mm throat depth: back gauge: 650 mm power: 380 V, 16 kW space: 3680 x 2060 x 1870 mm weight: 7580 kg

Maximum cutting length: 4000 mm Maximum sheet thickness: 4 mm steel Driven back gauge to 1000 mm Page fence and table extensions Cutting length limit Cutting edge lighting Protection fence, roll with safety switches Weight: 8500 kg

McIntyre 600 GT Shear Another Shear in the McIntyre GT Range, the 600 gives a massive cutting area for its relatively diminutive size. Versatile The 600 GT features a blade guard system which gives good visibility to the operator and acts as a hold down to prevent material kick back. The machine is foot pedal operated and the jaws return to the open position once the foot pedal is released to increase safety. Wheels are fitted as standard, and forklift points have been included on the body of the machine to ensure that it can be safely lifted both within the yard and during transportation. Ideal for larger items such as car radiators which can be handled in just one pass, the 600 GT can also be adapted to process catalytic converters.

Technical specifications: automatic raw water supply: Exchange pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.5: 7.5 kWVorfiltration: Selbstreinigender filter with automatic SteuerungFilterfeinheit: 300 µmMaximaler flow rate: 40 m ³/hFlockungsstufe: flocculation tank: 2 x 0,5 m³ (material PP) charging pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.0: 5.5 kWRührwerke FlockungsbehälterDosierstelle for flocculant: static mix / Rohrflockulator (material PP) ) Ultrafiltration: number of UF modules: 8 Stck.Modulanordnung in the rack (x-series): 2Filterfläche of the UF modules: 60 m ² Backwashing and chemically supported backwash: Backwashing medium frequency-controlled RückspülpumpeNeutralisation: neutralisation tank: Material PENutzvolumen: 5.0 m³ material, shaft and stirrer: beschichtetDosierstationen steel: ...