ba used for sale

Manufacturer: Homag, Type: KL 79, Control: Homatic, Min-max edge material mm: 3-20, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-25, Premilling: no, Fine milling: yes, Application of separation agent: no, IR zone: no, Strip magazin: Leistenmagazin, Min.-max. batten magazine mm: 3-20, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: no, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Number of sanding units: 2, Profile sanding top bottom: yes, Top pressure belt/roller: Riemen, Edge sanding straight: yes,

Manufacturer: Homag KAL 310/9/A20/S2, Type: 310/9/A20/S2, Year: 2005, Control: Powercontrol, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 15-30, Axis control: yes, Infeed table: Winkelanschlag, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Radius milling axis adjustment: yes, 2 motors: FK 13, Magazin : 2 X 6 fach, Radius scraper: yes, Type of scraper: servo gesteuert, Scraper with axis adjustment: yes, Spraying system 2: yes, Bonding part EVA: PU Verleimteil, Buffing unit: yes, Barcode: möglich, Workpiece support: yes, Hover cussion table: yes, Return type: TFU 140/L/20/08/105 Bauyeshr 2018, FREE  ...

Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: IMA, Type: Compact P/C F 6220, Year: 1996, Control: Imatronic 121, Min-max edge material mm: 14-55, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 8-20, Infeed table: yes, mit Vakuum: 2 X 3 kw, Power per lamp: 1-fach, kW Leistung Laser: yes, Coil magazine: yes, Strip magazin: yes, Bevel milling: MFA. 8.346, radius milling: yes, Magazin : yes nicht schwenkbar, Vertical grooves: R 3 und R 2, Nuten : yes, Radius scraper: yes, Type of scraper: 8.50, Spraying system 2: yes, Edge sanding: Rolle, Buffing unit: Ja, Free places: yes, Year :1996

Manufacturer: Homag PU Verleimung , Type: KL 79/2/A20/S2, Control: Homatic NC 21, Work piece width min-max mm: 60, Min-max feed m/min: 10-25, Axis control: Einlauflineal, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: FK 13, 2 motors: yes, Vertical grooves: 2, Grooves, slewable-controlled: yes, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Ersatzverleimteil : PU, Bonding part EVA: yes, Edge sanding: KS 10, Profile sanding top bottom: yes, Buffing unit: yes, Top pressure belt/roller: Band, Work piece refeeding: Bartgstedt ZHR, Compressed air bar: 6,

Manufacturer: Homag, Type: KAL 310/7/A20/S3 , Year: 2011, Control: PC 22, Software: Windows XP/Woodscout, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 12-60, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 18, Axis control: einlauflineal, Infeed table: Servo, Servo Einschubtisch: yes, mit Vakuum: 2 X 3 kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2-fach, Laser technology: yes, kW Leistung Laser: yes, Coil magazine: HL 84, Strip magazin: 2 X 1,5, Bevel milling: FK 8-fach Wechsler, radius milling: FK 13/Achsverstellung, Vertical grooves: Multiziehklinge MN 21 3 Profile, Grooves, slewable-controlled: PN 10, Nuten : yes, Radius scraper: yes, Servo copying: yes, Spraying system 2: A 20, Ersatzverleimteil : 5 kg, Number of sanding units: yes, Profile sanding top bottom: Einlauf und Auslauf, Barcode: möglich, Workpiece supp ...

Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2004, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 10-30, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre stations: yes, Bevel milling: FK 11/Verstellung automatisch, radius milling: 0,55 kW, Vertical grooves: PN 20, Radius scraper: yes, Rolling chain: yes, Spraying system 2: yes, Ersatzverleimteil : 5, Edge sanding: Riemen, Edge sanding radius: yes, Free places: yes, Year :2004

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010

Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...

Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze:  ...

Manufacturer: Homag mit Doppelenprofilerformatteil, Type: KFL 23/03/27/PU/30+ZHR 05, Year: 2000, Program: NC 21, Control: Homatig, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 250-2600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-55, Edgeband height max mm: 60, Min-max feed m/min: 30, Finished product: Fronten Küche, Axis control: yes, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Schutzfräsen/zerspanen/zerspanen, IR zone: yes, Coil magazine: 2 X 24 fach, Strip magazin: no, Min.-max. batten magazine mm: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: FK 13/6 fach, Grooves, slewable-controlled: 2, Radius scraper: yes, Type of scraper: yes, Scraper with axis adjustment: yes, Cleaning nozzles: yes, Bonding part EVA: PU Verleimteil, Number of tools per tool-m ...

Manufacturer: IMA, Type: Compact/U/812/F, Year: 1996, Program: IMA, Kantenmaterial : 0,4-12, Work piece width min-max mm: 70, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 8-50, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 15-25, Vorwärmeinheit IR: yes, Premilling: yes, Panel length min mm: 200, Leistenmagazin min-max mm: yes, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Mitre stations: yes, Mitre stations: yes, Radiusfräsen : yes, Contour milling type: yes, Eckenkopierfräs Motore: 4 Motore, Nutfräsen: yes, Number of sanding units: 3, Kantenschleifen: 1, Profilschleifen oben unten: yes, Radius scraper: yes, Flat scraper: yes, Top pressure belt/roller: Rolle, Year :1996

Manufacturer: IMA, Type: AVM/K/I/G 80/822/SR/ L 20, Year: 1991, Min-max edge material mm: 3-15, Work piece width min-max mm: 80, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 50, Min-max feed m/min: 18, Finished product: Leistenmaschine, Premilling: yes, Fine milling: yes, Coil magazine: yes, Min.-max. batten magazine mm: 3-15, Mitre stations: yes, Pre-milling: yes, Top pressure belt/roller: Rolle, Kantenschleifen gerade: yes, Kantenschleifenradius: 2, Werkstückunterstützung: yes, Compressed air bar: 6, Machine lenght mm: 11000, Year :1991

Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001

Manufacturer: IMA Kantenbearbeitung , Type: U/F 720 V/Compact, Program: yes, Control: no, Min-max edge material mm: 3, Work piece width min-max mm: 60, Min-max edge material mm: 3, Work piece width min-max mm: 60, Edgeband height max mm: 70, Min-max feed m/min: 3, Finished product: 250, Soft forming: 2, Axis control: no, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Granulat und PU, Profile milling: no, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, IR zone: MFA 843, Coil magazine: yes, Strip magazin: yes, Radius milling axis adjustment: Riemen, Corner tracing type: 10-25, 4 motors: 6,

Manufacturer: Homag, Type: KFL 10/42/QE/S, Year: 2002, Program: yes, Control: Homatic NC 21/ES00, Work piece width min-max mm: 280-600, Min.-max. workpiece length in mm: 320-2500, Min.-max. workpiece height in mm: 8-60, Edgeband height max mm: 30-50, Kantenmaterial min-max mm: 0,3, Vorschub min- max m/min: 10-40, Finished product: Spanplatten aufdoppeln bekanten, Softforming: yes, Einlauflineal gesteuert: yes, Premilling: yes, Profile milling: yes, Trennmittelauftrag: yes, IR zone: yes, Coil magazine: 2-fach, Premilling: yes, Mitre stations: yes, Vorfräsen: yes, Fasefräsen: yes, Radiusfräsen Achsverstellung: yes, Oszilierend: yes, Reinigungsdüsen: yes, Ersatzverleimteil : yes, Verleimteil EVA: yes, Düse: yes, Year :2002

Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994

Manufacturer: Homag, Type: KL 10/18/QA, Year: 2000, Program: Homatic, Control: NC 21, Min.-max. workpiece height in mm: 85 - 1200, Edgeband height max mm: 240, Min-max feed m/min: 8 - 60, Axis control: 0,3 - 3,0 , Einlauflineal gesteuert: 10 - 40, Application of separation agent: 0,4 - 12, Power per lamp: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: Granulat, Strip magazin: yes, Magazin : yes, Grooves, slewable-controlled: FK 13, Nuten : UF 11, Radius scraper: yes, Type of scraper: 8, Scraper with axis adjustment: yes, Flat scraper: 2, Type of scraper 2: yes, Corner trace buffing: 2 X Fase, 4 motors: yes, Corner trace buffing: yes, Servo-Kopieren: yes, Rollende-Kette: Band, Ersatzverleimteil : Riemen, Bonding part EVA: 6, Nozzle: 11.000, Pre-smelting Kg/Hr: yes, Year :2000

Manufacturer: IMA, Type: Compact PC/KIF 7220, Year: 1997, Programm: yes, Achsensteuerung: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: yes, Number of tools per tool-magazine: no, Radius scraper: yes, Flat scraper: yes, Buffing unit: yes, Moulding units swivel-mounted: yes, Schwenkbereich Grad: 45-90, Top pressure belt/roller: Rolle, Feeding speed max m/min: 10-20, Compressed air bar: 6, Year :1997

Manufacturer: IMA Kantenbearbeitung , Type: U/F 720, Year: 1995, Programm: yes, Achsteuerung: no, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Work piece thickness min mm: 70, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: 12, Strip magazin: no, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Soft edge single side: no, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Feeding speed max m/min: 10-25, Compressed air bar: 6, Year :1995

Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991

Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm -Weight: 1.8 kg

Model UM900 Conditie Gebruikt Voorraad nummer 2360 Belt width 900 mm Power 3 x 400V, 50Hz, 16A Dimensions 1550 x 1200 x 1700 mm

In-store baking oven Wiesheu Minimat 2 for 3 trays each 60 x 40 cm top with extractor hood with steam condenser Connection 400V, 16A-CEE plug Used device

Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrappi ...

Key data: 300 mm, 3920 mm, 34 mm

Extensive standard equipment: Double Column Structure Double Vice with Full Stroke Tension (Hydraulic) Floating Pendulum Vise Hydraulic Saw Band Tension Automatic feed in pendulum mode (500mm) Carbide saw blade guide system Stepless speed control by inverter Driven wire brush Work Light Automatic Chip Conveyor User-friendly NC control with touchscreen Display of belt speed on the touchscreen Flushing hose for machine cleaning

Balers, Bramidan, 4-x 30 SLD, 30 to. Pressing force – used - : Price from location: only 3.950.-€ (net) Manufacturer: Bramidan Type: 4-x 30 SLD Number: PEY297206-3 Year of Make: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1.850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the flutter tape is only so that the press is no longer used because a new, larger one was purchased) Available: immediately Location: Husum Instruction manual is available

Balers, Balers 16 S – used - : Price from location: only 1.950.-€ (net) Manufacturer: Schleicher Type: 16 S Number: 6150I1730E Year of manufacture: unknown H: 2000mm / W: 1500mm / D: 900mm Weight: 1.850kg 380V, 3 PH, 10.3 AMP, 4kW Condition: good Available: immediately Location: Husum Instruction manual is not available

Baler Paal Konti 325 D/SO, built in 1999 Technical data: Manufacturer: Paal Type Paal Konti 325 D/SO Built in 1999 Hours: 50702 Press force 94 t Drive power: 2 x 45 kW Total connection 104 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight 525 to 800 kg Transport dimensions approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex wor ...

LNS QUICK LOAD SERVO 2 / Rod Loading Magazine -Rod diameter (round) 6 - 80mm -Pole length 1.3 - 1.5 meters -Bar weight max. 67 kg -Charging time 4 - 12 seconds -Feed speed Max 100m/min -Air connection 5 bar Dimensions: LxWxH 2.2x1.5x1.5 meters / Weight 650Kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

Manufacturer: OTT Model: Strong Edge Year of Manufacture: 2020 Type of Machine : Edge banding machine Find more here - / Contact us at -

Manufacturer: Brandt Type of Machine : Edge Banding Machine Model: KDF 220 Year of Manufacture: 2012 Technical Specifications - Supply Voltage: 400Y/230V - Phases: 3-Phase - Frequency: 50 Hz - Fuse: 16 A - Maximum Operating Full Load Current: 14 A - Short Circuit Current Rating: 5 kA rms symmetrical - Control Voltage: 24 V - Largest Motor: 4.5 A - Largest Heater: 2.4 A - Enclosure Type: 1 Find more here - / Contact us at -

Used automatic band saw Sabi PBS250A with CNC Sabi and CE. CNC: Sabi. Cutting capacity round: 250mm. Cutting capacity square: 250x230mm. Cutting speed: 15 to 105m/min. Cutting tape: 3660x27x0,9mm. Power: 2,2Kw. Dimensions: 1980x1650x1430mm. Machine weight: 1250Kgs. CE: Yes.

For sale I offer a hydraulic cylinder from Tecpos. The cylinder was used as a demonstration device in the past and accordingly shows signs of use. Details: Tecpos TSLC-3013 Operating pressure: max. 700 bar Stroke: 13 mm 30 ton Flat cylinder -Single-acting, with spring retraction Shipping available for an extra charge. The hydraulic cylinder is workshop tested and sold immediately ready for use with a new UVV test and can be tested on site. Other accessories available on request. # Short Stroke Heavy Duty Cylinder # High Pressure Hydraulics # Compact Cylinder # Light Metal Cylinder # High Pressure Cylinder # Universal Cylinder # Hydraulic Cylinder # Directional Cylinder # Hydraulic Punch # Hydraulic Pressure Cylinder # Lifting Cylinder # Pressure Punch # Hydraulic Short Stroke Cylinder # Hydraulic Flat Cylinder

Semiautomatic band saw Starret ST-4040 with CE. Cutting capacity round: 280mm. Cutting capacity square: 280x280mm. Cutting capacity rectangle: 280x400mm. Angle cut: Yes. Cutting speed: 15 to 120m/min. Cutting tape: 3550x27x0,9mm. Power: 1,5Kw. Dimensions: 1150x1900x1700mm. Machine weight: 735Kgs. CE: Yes.

Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible.

Offered is a valve bag filling system (50kg) with connected palletizer. Bag type: valve bags (paper, PE or PP), filling weight: adjustable up to max. 50kg, piping system with integrated conveying screw / dosing screw, pneumatic bag clamping, weighing unit, discharge conveyor belt. Automatic layer palletizer - Ehcolo PM 400. Year of manufacture: 2001, capacity: up to approx. 400 bags per hour, incline conveyor / bag flattener, empty pallet magazine, complete machine enclosure. Inspection possible by arrangement.

For sale I offer a hydraulic hand pump from Tecpos. The hand pump was used as a demonstration device in the past and accordingly shows signs of use. Details: Tecpos ESP-08 Operating pressure: max. 700 bar Oil Supply: 800cc Shipping available for an extra charge. The hydraulic hand pump is workshop tested and sold ready for immediate use with a new UVV test and can be tested on site. Other accessories available on request. # Hand Hydraulic Pump # Hand Pump # Hydraulic Cylinder # Hydraulic Hand Pump # High Pressure Pump # High Pressure Hand Pump # Hydraulic Hand Pump # Hydraulic Pump

Key data: 230 mm

suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece

Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm

Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard  ...

BALLER PAAL KONTI 425 C Technical specifications: Manufacturer: Paal Type: Konti 425C Year of manufacture: 1995 Klsdm Ajx Dk Ttsty Atel Feed opening: 102 x 175 cm Drive power: 170 kW Caedm Atyexx Su Uo Atsa Compression force: 85 t Settings: Horizontal, fully automatic Roll weight: 500-650 kg Press weight: 25 t PRICE ON REQUEST! ----- BALLER PAAL KONTI 425 C Technische Daten: Hersteller: Paal Typ: Konti 425C Herstellungsjahr: 1995 Bwsbjycfuqsmcbw Nveh Einfüllöffnung: 102 x 175 cm Antriebsleistung: 170 kW Kompressionskraft: 85 t Einstellungen: Horizontal, Vollautomatisch Rollengewicht: 500-650 kg Pressgewicht: 25 t PREIS BEI ANFRAGE!

For sale: Paal Konti 425 D horizontal baler Technical specifications: Manufacturer: Paal Type: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Kledex Dlanem Aty Atsl Pressing force: 115 t Settings: Horizontal, fully automatic Roll weight: 550-850 kg Pressing weight: 36 t PRICE ON REQUEST! ----- Verkaufen horizontal Baller Paal Konti 425 D Technische Daten: Hersteller: Paal Typ: Konti 425D Baujahr: 2002 Einfüllöffnung: 102 x 200 cm Antriebsleistung: 2 x 45, 2 x 75 kW Druckkraft: 115 t Einstellungen: Horizontal, Vollautomatisch Rollengewicht: 550-850 kg Pressgewicht: 36 t PREIS BEI ANFRAGE!

New BEL M314Ai Laboratory Balance - 310g - 0.1mg New equipment in its original packaging Technical Parameters: Precision Balance Reference M314Ai Legibility: 0.1 mg (10-4 g) Maximum capacity: 310 g Repeatability: 0.1 mg Linearity: 0.3 mg Response time of less than 4 seconds Dimensions of the top: diameter 80 mm Chamber dimensions (W x D x H): 162 x 171 x 225mm Net weight approx. 6.6 kg Scale dimensions (W x D x H): 215 x 345 x 345 mm

SARTORIUS ED2201-CW Precision Balance 2200g / 0.1g New equipment in its original packaging Laboratory Scale Reference : ED2201-CW Weighing capacity: 2200g (2.2kg) Readability: 0.1 g Linearity: 0.01 g Cooldown: 1 s Dimensions weighing area 180 x 180 mm Weight: 1.4Kg