136,160 used machines on RESALE, but how to find them? Machine Search
On 6 pallets Auction-ID: A1-50244-143
TAURUS shear baler Year 2006 1700 ton cutting force Working hours about 3,500 Side compression force 2x250 longitudinal compression force 150 tons. Machine in very good condition Always serviced and serviced regularly It is sold with its 805 kw Perin generator with a 3000 liter tank
Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel
And diverse on 7 pallets Auction-ID: A1-50244-133
Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel
Different types and sizes 3x wired. Auction-ID: A1-50667-65
used baler Manufacturer: ABBA Type: ACOMAT 400 H3A Year of Make: 2008 specifications: Press force: 45 t Drive power: 7.5 kW Throughput capacity: approx. 45 m³/h Filling opening: 1,150 x 850 mm Channel format: 790 x 730 mm (W x H) Bale size: 790 x 730 x length in mm (W x H x L) Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Machine dimensions: approx. 4,250 x 2,580 x 2,000 mm (L x W x H) Machine weight: approx. 3,600 kg
number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW
number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:8,6 t spindle drive motor:11 kW
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: Lillnord temperatures: +20°C – +45°C humidity: 60%-95% power: 6,2 kW, 380 V Made in Denmark Description for 10 m3 proofer used
ATiB HTUB 80/100-L RF Charger HTUB is the top-of-the-line RF charger designed for the highest performance. This range includes all the main characteristics of RF ranges in terms of efficiency, Power factor, ventilation, internal structure (dedicated 3 compartments) and general flexibility. An integrated digital interface with OLED display and integrated USB enables the best and easiest overview/setting of charging parameters, diagnostic and data reports. Main features AC mains voltage: 480Vac (3ph) 50-60Hz / 600Vac (3ph) 50-60Hz Display: OLED/LCD display, 4 LEDs and 4 control buttons Setting Type: OLED Display: Current, Capacity and 7 pre-set Charging Characteristics Through PC laptop/USB port: advanced programming Data storage: report on the last 50 charges and important technical data (integrated USB port) Cooling System: Dedicated air cooling directly to the heat sink ...
total power requirement:380V 50 HZ,1,67 kW dimensions of the machine ca.:1,4 x 1,8 x 1,4 m
A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.
total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw
Welding Width: 900 mm // Bag Length (Max): 10000 mm
JCB 3CX Backhoe Loader – 2007 – 3,777 Operating Hours An excellent opportunity to acquire a well-equipped 2007 JCB 3CX backhoe loader with just 3,777 recorded operating hours. This versatile machine combines powerful excavation capabilities with practical loading functions, making it an ideal choice for construction, agricultural, landscaping and general earthmoving applications. Equipped with a multifunctional front bucket featuring a hydraulic quick coupler and fork attachment capability, the machine offers excellent versatility for loading and material-handling operations. The rear excavator features a telescopic boom, hydraulic quick coupler and three excavation buckets, allowing efficient operation across a wide range of digging and trenching tasks. Additional attachments include a hydraulic breaker and a snowplough blade, further expanding the machine's capabilit ...
max. format 36 x 36 cm Year of construction 2010 Banding device Computer control with monitor US 2000 Corner Slider CL Banding Station for paper and foil tapes max. stacking height 30 cm Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.
Volvo BL71 Backhoe Loader – 2006 – 13,800 Operating Hours Available for sale is a 2006 Volvo BL71 backhoe loader with 13,800 recorded operating hours, presented in good working condition and equipped with an extensive range of attachments. Powered by a 95 HP Deutz diesel engine, this robust and versatile machine is designed for demanding excavation, loading, construction, agricultural and general earthmoving applications. The machine features an extendable rear excavator arm, providing additional digging reach and flexibility, together with a quick hitch system for efficient attachment changes. A comprehensive selection of attachments is included, making this backhoe loader particularly suitable for operators requiring a multifunctional machine capable of handling different types of work. Technical Specifications: Manufacturer: Volvo Model: BL71 Year of manufa ...
From a current recycling we offer you various bakery furnishings including baking proofer, bread slicer, freezer, stainless steel sink. Year of manufacture: various (including 2014/2015) First registration: / Condition: used. Functionality cannot be guaranteed Hours: / Asking price: 5.000,00 Euro VHB Factory Price: Equipment / accessories / other information: Back proofer, 15 chairs, bread slicer, stainless steel sink, freezer, filter proofer, POS system screen, cream climate cabinet Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 63607 Wächtersbach The sale is without warranty Subject to prior sale
1 CAMPANINI ball winder type Semiaut, 16 spindles, creel for 32 bobbins, year 1989
2013 JCB 3CX Sitemaster Backhoe Loader – 7,763 Operating Hours Available for sale is a well-maintained 2013 JCB 3CX Sitemaster backhoe loader with 7,763 recorded operating hours. Built for demanding professional applications, the JCB 3CX Sitemaster combines powerful excavation performance, versatile loading capabilities and excellent operator comfort. Its robust construction and practical equipment make it a suitable choice for construction, civil engineering, agricultural and general earthmoving operations. The machine is equipped with a Powershift transmission, providing convenient gear changes and efficient operation across a variety of working conditions. The multifunctional 4-in-1 hydraulic front bucket allows loading, grading, grabbing and material-handling operations, while the hydraulic quick hitch enables convenient attachment changes. An extendable rear excavat ...
new
cutting diameter: 440 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 610 mm cutting capacity - flat: 440 x 500 / 30° mm cutting capacity - round: 440 /30° mm cutting capacity - square: 440 x 440 / 30° mm cutting capacity - flat: 440 x 410 /45° mm cutting capacity - round: 410 /45° mm cutting capacity - square: 410 x 410 / 45° mm cutting capacity - flat: 440 x 250 /60° mm cutting capacity - round: 320 / 60° mm cutting capacity - square: 250 x 250 / 60° mm cutting capacity - flat: 440 x 610 / 90° mm cutting capacity - round: 440 / 90° mm cutting capacity - square: 440 x 440 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 1,1 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 4,3 kW weight of the machine ca.: 1,54 t dimensions of the machine ca.: 3000 x 1200 x 2000 mm Inverter Hydraulic vice Saw blade at an angle of 3° Digital dis ...
Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine GDK2500, TR300x10, 946263, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D500/400/340mmx360mm high. Approx. 230kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460006160202, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D510/400/365x315mm high. Approx. 240kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
UNUSED - Size: 2.100 x 6.100 (6.900)mm. with WS 85 system. With Siebtechnik GR 45 Unbalance exciter, E.motor, Cardan-shaft and Rubber springs
Type: VX 2078 - Mach. No.: D 6221 / D 6222 - Year of Manufacture: 2005 - Size: 2.000 x 6.000mm - Included: 2 Pcs. Unbalance exciters, Cardan shafts, 30 kW/750 RPM E.Motor and Springs - Can be sandblasted and painted.
Maximum pressure: 50 tons Year of Make: 2006 Pressing force: 65 tons/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1000 mm Dimensions of the tailgate: 920 x 1400 mm Bale weight: 350-500 kg Weight: approx. 13 tons Power connection: 400 V/ 22 kW Bale tying: automatic
Gildemeister GM42 AC Hirth, - Spindle drum locking by means of a triad of HIRTH-type rings, - Cross slide including drive in pos. 1, 2, 4, 5, - Hydraulic pickup spindle, - Internal flushing for pickup spindle, - Spindle stop attachment for pickup spindle, - Hydraulic slide for rear working with two positions in pos. 6, - Pneumatic part catcher, - Conveyor belt for finished parts, - 5x frontal spindles, rotating, with internal coolant supply, - AC threading device, - Bar feed exclusion device, hydraulic, - Chip conveyor, hinged belt type, including magnetic filter, - High pressure coolant system 100 bar, - CO2 fire fight system Total Walther, Number of spindles: 6, Max bar diameter [mm]: 42, Spindle speed [rpm]: 500 - 2.700, Max. bar feed in one station [mm]: 130, Max. travel of toolspindles [mm]: 120, Max. stroke of cross slides [mm]: 59 (pos. 1, 2) | 52 (pos. 3, 4, 5, 6), Ma ...
Edge banding machine Type: KAL370 Ambition 2274 Manufacturer: Homag Year: 2016 Professional edgebander designed for edging straight edges of laser edges, ABS, PVC, and solid wood strips. Suitable for various types of edging materials in both longitudinal and transverse directions. TECHNICAL SPECIFICATION AND EQUIPMENT Control HOMAG PowerTouch control panel Preparation and Application Spray of Riepe LPZ/II separating agent before pre-milling (prevents glue from adhering to the surface of the workpiece) Pre-milling unit: 2 × 3 kW, Ø 125 mm AirTec for zero-joint edging of laser edges Magazine for two edge types Gluing Technology High-capacity melting unit – 4 kg glue reservoir Edging unit suitable for PUR / EVA / PO adhesives Processing Units End trimming unit – pneumatically controlled (inclined/vertical), 2 pcs Flush trimming unit for precise trimming of edge overh ...
Key data: 400 mm, 4800 mm, 870 mm
Metora MBS 400 - Metal Band Saw - Hydraulically controlled lowering of the saw frame - Hydraulic raising of the saw frame - Mounted on turntable Specifications - Capacity: 400 mm - Working height: 870 mm - Saw blade dimensions: 4800 x 34 x 1.1 mm - Motor power: 3.2 kW - Machine dimensions WxHxD: 2600 x 1550 x 1200 mm - Weight: approx. 1300 kg
Properties: Volume 6130 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3700 mm Height 2560 mm Diameter width 1600 mm Surface inside 2B=IIIC ground Surface marbled on the outside 1 cold plate Digital temperature measurement Description Topsoil: Clapper bottom 2 crane eyes with central thread welding nozzle DN 100 to DN 40 with threaded nozzle DN 50 with fermentation valve DN 50 with check valve DN 50 Vent pipe DN 50 with threaded nozzle DN 50 and airlock DN 50 and T-piece 4 saddle feet Sprinkler ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN15 Manhole 420x320 mm Sample tap DN 15 Ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CI ...
maximum number of results exceeded
please refine your search
50 € 
