ba used for sale

all stainless steel capacity 300 L. (= ± 10CF) Double Ribbon mixing arm Dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved 2 speeds: 16 en 32 rpm 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: herbs, ingredients, powders,…

new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions 12 kw pneumatic lid inspection gantry safety lid CE-approved overall dimensions (l x w x h) : ± 2.210 x 1.130 x 1.770 mm (open lid : ± 2.630 mm) infeed height : ± 1.600 mm outfeed height : ± 720 + 20 mm + Loader for eurobins

Control system Battenfeld Unilog 9000 C for Battenfeld injection moulding machine

new ! all stainless steel 2 speeds (20 and 40 rpm) 2 mixing directions inspection gantry safety lid CE-approved variable speed plc control overall dimensions (l x w x h) : 1.970 x 1.000 x 1.600 mm (open lid: H: 2.250 mm) Quick & Clean system Seals of mix axles easy and quickly disassembly and monolithic seals + Loader for eurobins

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

new ! all stainless steel speed : 27 rpm 2 mixing directions safety lid CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.400 x 1.000 x 1.600 mm

Take-up Winders for synthetic Yarn Barmag POY / FDY filament yarn high speed take-up winder, SW4 type with 2 bobbins Chuck length: 600 mm Chuck type: 2 bobbins Chuck dia: 75 mm Stroke length: 250 mm max package dia: 305 mm MAX MECHANICAL SPEED 6000 M / MIN, WITH DOUBLE-DECK ARRANGEMENT AND PITCH 410 MM

CALIBRATION TUNNEL COOLING TUNNEL LOADING TUNNELS EQUIPPED FOR DIAM TUBES. 20 TO 160 MM HOURLY PRODUCTION: 280-300 KG/HOUR

We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.

We can offer you 5 x Barmag FK6-1000V texturizing machines,manufactured in 2019,240 spindles,with spandex(lycra) device,still working,good maintenance. We machinery dealer of Polymwerization,POY,FDY,DTY,Staple,Nonwoven amd spare parts. We have many brands and models machines, tell me what you need seriously!

Used ribbon mixer, capacity approx. 300 liters. Manufacturer Baker Perkins Ltd.

BAVARIAN BREWERY TECHNOLOGY - 80HL BREWERY WITH TANKFARM YEAR 2009, UPGRADED 2020 FORMER DARK STAR UK BREWERY Alan Ruddock Complete Malt Milling System with Steels Masher Bavarian Brewery Techology Mash Mixer Bavarian Brewery Techology Lauter Tun Bavarian Brewery Techology Brew Kettle Bavarian Brewery Techology Whirlpool Scada Control System (2020) HLT Vessel 1 8500 Litre HLT Vessel 2 8500 Litre CLT Vessel 20,000 Litre Brewhouse Pumps, Flowmeters, Valves, Pipework TANK FARM 6x Bavarian Brewery Technology Stainless Steel Jacketed Conical Fermenter, 9,000 litre 4x Biomashin Stainless Steel Jacketed Conical Fermenter 9375 litre, 2011 4x Biomashin Stainless Steel Jacketed Dish bottom tank, 9200 litre, Year 2012 TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter TMINOX 20,500 litre CCT Jacketed Stainless Steel Conical Fermenter Also 37 bbl, ...

Bartell FSW-409 7/8in bead winding machine suitable for PCR tyres 12in to 20in consisting of: - 12 station bead wire let of unit. - Prodicon zig zag cutter Type Z/Z year 1988 (takes sheet compound max 750mm wide and cuts to suitable size for feeding extruder. - 60mm dia coldfeed extruder, L/D ratio 13:1, with 18.4kw DC variable speed motor and 3 x TCU's - Festoon section - Former unit with various Bartell formers available/included. - Siemens S5 plc controls.

Stock# U2416 Used dissolver by Oliver+Batlle S.A.(ES) type DISPERMIX 50 designed for work on vacuum. Machine has non-corrosive shaft with working length 144.5 cm. Shaft is belt driven by el motor 40 kW, 1470 rpm, 380/660 V, 50 hz. Ex design of motor (ExeG). Mechanical adjustment of shaft rotation. Shaft is equipped with stainless steel toothed disc, with diameter 350 mm. Rising and lowering of agitator in range 110 cm and is driven hydraulically. Machine has also lid cover, with diameter 108.5 cm, for work on vacuum, rised and lowered by two hydraulical actuators. Together with mixer there are: - vacuum pump Pfeiffer Vacuum model Hena 200, output up to 240 m3/h, driven by el motor 5.5 kW. - stainless steel mixing pan with volume 500 l. Mounted on 4 leg, no bottom discharge outlet. - local control panel integrated with two hydraulic devices.

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

Lmacchia Barley twist lathe- model012/FE Spiral/rope turning lathe Barley twist with automatic indexing 67" max. length 8" max. working diameter as new condition...$9,500 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)

BALLISTRINE- C 70 N- auto feed thru (2) sided shaper(2) 10HP; 3PH spindle motors • (2) 30mm diameter spindles with 5in. under the nut • Spring loaded floating spindles • In-feed and out-feed rubber covered upper feed rollers • Working width 14.4in. (360mm) max • Working height 4.8in. (120mm) max • Min working length 9.6in. (240mm) • Spindle 8,000 RPM • feed 3 to28..Price-$8,900

Marchesini BA300 Continuous motion cartoner Automatic Bottle scroll infeed system Guk style leaflet folder Carton size range Width 25-100 Height 13-70 Length 78-150 Maximum mechanical output 250 CPM actual speed dependant upon nature of the product.

Vials filler for inyectables with weight dosing filler and stoppering Output 3.000 vials/h Size range diameter 16 mm / max. 80 mm – height min. 55 mm / max. 200 mm The fill range is 1 up to 1.000 ml with 4 needles Electrical supply 220/380 V 50 Hz Weight 1350 Kg. The machine include a turning table and rabs

Accessorie for Folding Machines serial o317 Machine No.: 102-9-700-016

M. No.: 1166

Optoelectr. distance sensor BOD002N, BOD 24K-LPI08-S4, Balluff, mint condition -50% Special price The current new price of a similar product is approximately € 900. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 250 hours. Incl. sensor cable with approx. 7m + 5-pin plug M12 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liabili ...

Storage Tank 920 Litres with cooling jacket in AISI 304 NEW, incl. TÜV Certificate Standard Features: Total Height: 2460 mm Body Height: 1900 mm Diameter: 850 mm weight: approx. 240 kg max.working pressure product space: 6 bar Material of tank: 1.4301 max.working pressure cooling jacket: 1 bar max.working temperature to °C: 130 Surface inside: III C

BARMAG POLYESTER EXTRUSION -SPINNING LINE WITH 12 POSITION / 72 THREADLINES FOR POLYESTER POY MICROFILAMENT YARNS • MANUFACTURER : BARMAG , GERMANY • CONSISTING OF FOLLOWING EQUIPMENT : •1 EXTRUDER BARMAG 12 E 8•SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS3,5 CC/U•SPINNERETTES 100MM DIA, BOTTOM LOADED,DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO•POLYMER MANIFOLD EXTRUDER TO SPIN BEAM•DOWTHERM MANIFOLD FOR SPINBEAM ANDPOLYMER MANIFOLD•QUENCH SYSTEM INCLUDING FINISH SYSTEM,SPINFINISH JETS BY 'KYOCERA'•WITH CONVENTIONAL QUENCHING CABINETS +EVOSEPEED & RADIAL TYPE •TAKE UP UNITS, INCLUDING:•TAKE UP SECTIONS / PLATFORMS / LADDERS•COLD GODETS, ONE PAIR PER POSITION•INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS•YARN SUCTION SYSTEM•12 WINDERS, BARMAG CW6-1200/66 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

CATALOG NO. 7166 TECHNICAL DATA - loading hopper inlet 810x630mm - rotor working width 620mm - main engine 18.5kW - pump motor 0.75kW - number of knives 30 pcs - knife dimensions 30x30mm - 41mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1800x1170x2000mm - weight approximately 1500 kg ADVANTAGES – German production – like WEIMA WL4 – pressure drawer – autoreverse – unpainted – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 47900 PLN Net price: 10644 EUR depending on the price 4.50 EUR Net price: 12605 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer ...

The scope of delivery includes: 01x Stacking crate / Euro container, used Manufacturer: Bekuplast Type designation: Basicline Material colour: grey Product dimensions: 600 x 400 x 320 mm (LxWxH) Internal dimensions: 567 x 367 x 317 mm (LxWxH) Volume: 64.5 l Weight: approx. 2.28 kg / pcs. Material: Polypropylene Handles: closed Front wall: foldable on one side Side version: closed Bottom finish: smooth, closed Note: -Insensitive to acids and alkalis -Cold and heat resistant It is a second-hand item, there may be scratches, dents and traces of use exist. The price shown is the same as the pick-up price incl. VAT per piece! General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place ...

new all stainless steel discharging height ± 1.770 – 2.250 mm mobile

NEW ! all stainless steel suitable for eurobins of 200L discharging height : ± 700-900 mm 1,5 kW mobile ± 300 kg dimensions (l x w x h) : ± 1.800 x 1.100 x 1.300 mm

BasysPrint 855 (Online System) Built 01/ 2010 2-Laser Head UV,405nm Exposed Plates 85600 Max:Plate Size 920 mm x 1,080 mm Min: Plate Size 323 mm x 450 mm Cassettes Manager 1 Cassettes With Kodak Merxury 85 PlateProcessor Server PC, 20 TFT Monitor.

1 ALLIANCE sample high temperature jet dyeing machine, type Baby Jet, capacity 4 to 10 kg (according to the weight and composition of the fabrics), year 1996, maximum dyeing temperature 140 ºC, machine equipped with filter, TCA 200 dye cycle controller, winch is inverter controlled (OMRON), with addition vat, Machine delivered fully erected ready to connect to media (no cables and no pneumatic pipes a disconnected for the transport

For the gentle preservation of liquid foods with and without carbon dioxide in pre-filled bottles. Depending on the shape of the bottle, between 60-120l/h is possible, control to the desired product temperature or by means of a timer. ccbo2hk Gas spring-supported basin cover, full insulation, on castors with storage compartment, can be used in a wide variety of bottle shapes (milk bottles, beer bottles, preserving jars, etc.), dry-run protection, heat-up phase approx. 1h (20°-90°), standard with perforated metal base, heat holding time adjustable (0-99 min) Specifications: Water capacity ~115 l Weight 143 (= empty weight) kg Height 1 090 (= working height) mm Width 705 mm Length 1080 mm Electrical fuse 16 A Electrical connection 400V 50Hz (3 phases) Electrical power 9.15 kW Nominal capacity l/h up to 120 l/h

MTU 16V4000 M 90 A BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7717 5260981120

MTU 16V4000 M 90 B BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7720 5260981120

MTU 16V4000 M 90 A BANK 2930-12-378-7717 5260981120

Hot counter + refrigerated counter on undertable with casters Dimensions undertable: H95 x W193 x D76 cm Hot Counter BETEC Execution: Hot counter GN 2/1 230V / 50 Hz Heat output up to 90°C the hot counters are lit up Total dimensions: H55 x W75 x D78 cm Year of Make: 2019 Chilled distribution depot: Bartscher Batida 2/1 Refrigerated display case / cold counter 2 x GN 1/1 with squared glass version 406051 This refrigerated display case / show display case from Bartscher is a guarantee for your good product presentation. Dimensions (W/D/H) cm: 75 x 77.5 x 60 cm Weight: 78.6 kg Capacity: 1 x GN 1/1-6.5 cm height (53x32.5cm) Technical services: Temperature range: +6ºC / +10ºC Version with convection cooling including lighting Connection: Connected load: 230 V /0.29 kW 1 phase / 50 Hz / 16 A with plug in Schuko design ...

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: Grundfos Number: 3 Model: NBE 50-160/167 A-F-A-BAQE Built: 2008 Rated flow current: 87.4 m3/h Nominal head: 32.6 m Speed: 2900 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Manufacturer: Grundfos Number: 3 Model: NBE 65-160/173 A-F-A-BAQE Built: 2008 Rated flow current: 126.9 m3/h Nominal head: 33.4 m Speed: 2910 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 15 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

MTU 16V4000 M 90 B BANK 2930-12-378-7720 5260981120

No.: 851275 with speed-controlled feed pump Funnel in Exx protection with switchgear good condition Dimensions LWH: 700 x 700 x 700 mm Weight: approx. 100 kg

n1-n2= 50-2000 rpm 220 V 50 Hz Dimensions LWH: 300 x 300 x 90 mm

- Battenfeld Unilog 4000 display - Battenfeld Unilog 4000 claviatura - Battenfeld Unilog 4000 TFU 400 card - Battenfeld Unilog 4000 rack - Battenfeld Unilog 4000 CPST 203 card - Battenfeld Unilog 4000 CPEA 200 card - Battenfeld Unilog 4000 ELIF 400 card - Battenfeld Unilog 4000 CC10 card - Battenfeld Unilog 4000 SNT 411 power supply - Battenfeld Unilog 4000 UTR 300 card

BAYKAL HNC 4110 hydraulic guillotine shears built in 2019 in Turkey are designed for precision cutting of workpieces with a maximum thickness of 10 mm. The machining process is performed by extremely precise cutting knives with adjustable gap between blades. The all-steel construction combined with a powerful hydraulic system additionally ensure the highest stability and machining performance. The BAYKAL HNC 4110 guillotine shears have been in use for a small amount of time – so far they have worked only 560 hours. The total weight of the machine is 15400 kg. Technical specifications of the BAYKAL HNC 4110 guillotine shears - HMI panel: SIEMENS SIMATIC HMI - maximum sheet metal length: 4060 mm - maximum sheet metal thickness (Rm

Key data: 150 mm

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

Max. size= 42 x 42 cm, Availability= 082023, Plate punch Bacher 425 mm LOT Loaded in truck or container

Max. size= 80 x 60 cm, Availability= 042023, max. plate width 80 cm Punching distance 425 mm Machine No. 2349 LOT Loaded in truck or container

Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.