ba used for sale

Press force: 16t, Feed opening dimensions X/Y: 1100mm/590mm, Chamber dimensions X/Y/Z: 1100mm/700mm/1130mm, Bale dimensions X/Y/Z: 1100mm/700mm/950mm, Max. bale weight: 200kg, Tying: 4-way vertical, Throughput: approx. 4-8 bales/h, Machine dimensions X/Y/Z: approx. 1450mm/950mm/2400mm, Weight: approx. 950kg. No UVV inspection and the hydraulic oil has been drained. The baler has not been cleaned. An on-site inspection is possible.

Semi-automatic band sawing machine Saw blade size: 2910 x 27 x 0.9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 1.0 kp/cm² (0 - 1.0 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New !' Dimensions(Single Pressure Gauge): 138 x 100 x 48 mm Dimensions(Packing): 140 x 105 x 105 mm

Dismantled / disassembled by the sellerACEC, 9.0 kW, 380 V, 3~50 Hz, 970 rpm380 V, 3-phase, 50 Hz

Contact pressure gauge, pressure gauge with switching contacts MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 4 kp/cm² (0 - 4 bar) ) Switch Type: 2/Z102-1 Switching Capacity: 220V AC/DC 30W(VA) Housing Diameter: Ø 160mm Accuracy Class: 2,2,000V AC/DC 5 flange diameter: Ø 160 mm with protective membrane ! New ! Dimensions: 220 x 210 mm

50 cm working width, with Lehnhoff MS01 holder

Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible.

Offered for sale is a fully automatic KASTO vertical bandsaw. Round cutting capacity: 10mm-260mm, max. square cutting capacity X/Y: 260mm/260mm, min./max. cut-off length: 5mm/600mm, feed length: 600mm, min. remnant length: 10mm, max. cutting speed: 125m/min, saw blade dimensions X/Y/Z: 4115mm/41mm/1.3mm, control: KASTO minipos 807, weight: approx. 2200kg. Inspection by appointment is possible.

Contact pressure gauge, pressure gauge with switching contacts MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 16 kp/cm² (0 - 16 bar) Switch Type: 2/Z112-1 Switching Capacity: 220 V AC / DC 30 W (VA) Housing Diameter: Ø 160 mm Accuracy Class: 1 Connection Thread: M20 x 1.5 New ! Dimensions: 210 x 205 x 150 mm

Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg

Power supply, power supply unit, ballast, driver Manufacturer: GIB Lighting, ballast -Type: Pro-VT 250W -Quantity: 10x ballasts available -Price: per piece -Dimensions: 185/90/H80 mm -Weight: 3.7 kg/pc.

Both the standard version and the tandem version are available. Manufacturer: DOPAG Dosiertechnik und Pneumatik AG Product Type: Pneumatic Drum Pump / Material Transfer Pump Series: P200 Version 1: Drum pump P200 2H Version 2: Drum pump P200 2H tandem Operating concept: 2-hand version Drive: Pneumatic Compressed air supply: 6 bar Maximum container size: 200 l Maximum container height: 880 mm Year of manufacture: 11/2018 Weight P200 2H: 386 kg Weight P200 2H Tandem: 394 kg Material feed: Directly from the original container Pump principle: piston pump Compressed air treatment: Festo SMC Valve Type: VSA4244-00-1 The DOPAG P200 systems are designed for the conveying of highly viscous materials from 200-litre containers, e.g. adhesives, sealants or lubricants. Depending on the specific pump configuration, different flow rates, gear ratios and material ranges are possibl ...

Test manometer with test valve MESSGERÄTEWERK BEIERFELD 1/FM20/2 0 - 1,0 - 1,0 6 kp/cm² (0 - 1.6 bar) TGL16374 accuracy class: 0.6 housing diameter: Ø 160 mm test valve with test connection M20 x 1.5 TGL16401 in wooden case New !' Dimensions: 330 x 195 x 145 mm

Test manometer with test valve MEASURING INSTRUMENT PLANT BEIERFELD 1/FM20/2 0 - 2,0 - 2,0 5 kp/cm² (0 - 2.5 bar) TGL16374 accuracy class: 0.6 housing diameter: Ø 160 mm test valve with test connection M20 x 1.5 TGL16401 in wooden case New !' Dimensions: 330 x 195 x 145 mm

Pressure gauge MEASURING INSTRUMENT PLANT BEIERFELD 1/FM20/2 0 - 16 kp/cm² (0 - 16 bar) TGL16374 Accuracy class: 0,6 Housing diameter: Ø 160 mm Connection thread: M20 x 1.5 New ! Dimensions: 200 x 160 x 55 mm

Balancer, machine balancer, spring balancer, cable extension, weight compensator, winder -Spring balancer: Microjolly type balancer -Load capacity: up to 1.75 kg -Cable extension: m -Quantity: 1x spring balance available -Dimensions: 100/100/H65 mm -Weight: 0.2 kg

automatic baler Manufacturer: UNOTECH Type: UPAMAT 100 V 5 Factory overhauled by the manufacturer in 2024 Technical data: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal Gear Pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: with a bulk density of 30 kg/m³ approx. 10.0 t/h with a bulk density of 50 kg/m³ approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central l ...

Contact pressure gauge, pressure gauge with switching contacts MANOMETERWERK WITTGENSDORF 0 - 600 kPa (0 - 6 bar) Switch type: 2/Z112-1 Switching capacity: 220 V AC / DC 30 W (VA) Housing diameter: Ø 160 mm Accuracy class: 1 Connection thread: M20 x 1,1,01 5 New !' Dimensions: 210 x 205 x 150 mm

Special water bath, laboratory water bath DINKELBERG ATH 232319 year: 2004 10 liters ambient temp. +5° to +80°C Housing: Polypropylene with heater / heating element 230 V 800 W Dimensions: 420 x 250 x 360 mm

Sturdy Pehaka band saw for sawing timber and other materials. Technical data: Roller diameter: 800 mm Motor: 3 kW Clearance height: max. approx. 350 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Stainless Steel Basket, Dipping Basket Pagus Inner Dimension: 480 x 315 x 55 Mesh Size: 8 x 8 mm Stainless Steel ! Mesh Slightly Damaged ! Dimensions: 500 x 330 x 400 mm

max. saw blade D 350 mm, Miter: 45-90° left + 45°-30° right, Speeds/ motor power 9/18/36/74 rpm. 1.5 + 1.8 kW, Automatic cutting feed infinitely adjustable, pneumatic jaw clamping Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm Square 90° 100 x 100 mm Square 45° 95 x 95 mm Square 30° 85 x 85 mm Dqyu0F Round 90° 120 mm Round 45° 120 mm Around 30° 100 mm Smallest dimension to be sawn around 10 mm Smallest dimension to be sawn flat 10 x 10 mm coolant device, roller conveyor, Voltage 380V-50Hz Connection cable with 16 A CEE plug, new saw blade, Operating instructions with spare parts list and electrical circuit diagram, new engine

Contact pressure gauge, pressure gauge with switching contact WIKA 212.20.100 Cont. 821.111 0 to 250 bar Ø 100 mm with diaphragm seal (approx. 1500 mm cable) New! Dimensions: 120 x 60 x 55 mm

Banding maretial PW8030150 white paper 40 rolls and PB7030150 brown paper 40 rolls. Banding maretial PW8030150 paper white 40 rolls and PB7030150 paper bouwn 40 rolls.

Ball screw INA ZKLF 2068.2RS NA ( ZKLF2068.2RSNA ) 02/W6 ASP 14-20 ( 02/W6ASP14-20 ) thread length: 845 mm thread: Ø 32 mm pitch: 4 mm for AGIE CUT 300 used, tested ! Dimensions: 1200 x 210 x 125 mm

In the pipeline HSM baler, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of Make: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

Kaulenwagen, Dockenwagen KÜSTERS Typ 881.80 bale width: 2000 mm axle height: approx. 1200 mm with drive: 0.75 kW 220 / 380 V with bale cotton blend fabric Ø 1100 x 1550 mm used, tested ! Dimensions: 3300 x 1100 x 1750 mm

- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l

Kaulenwagen, Dockenwagen PAGUS bale width: 2000 mm with brake axle height: approx. 1180 mm with bale cotton blend Ø 700 x 1300 mm used, tested ! Dimensions: 2600 x 950 x 1540 mm

Unix In-Store Baking Oven 3 pieces Type: XBC605 Stainless steel cladding Black front Digital control To be given only to dealers or export Price for all 3 stoves together: 4500.-€ net from stock.

Kaulenwagen, Dockenwagen PAGUS bale width: 1700 mm with brake axle height: approx. 1180 mm with bale cotton blend fabric Ø 800 x 1300 mm used, tested ! Dimensions: 2300 x 1000 x 1600 mm

Batch Mixer, Ploughshare Batch Mixer, 1600l Capacity, 22kw

Pressure regulator manually adjustable, ultrapure gas regulator DRUVA type: LMD-500-01 inlet pressure: max. 50 bar outlet pressure: 0.5 - 6 bar stainless steel ! Dimensions: 125 x 115 x 50 mm

Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Pressure regulator hand-adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-3262-242H283 inlet pressure: max. 35 bar outlet pressure: 0 - 35 bar stainless steel ! Dimensions: 135 x 135 x 70 mm

Used automatic dough batching machine type SPdc-1000. New 2001. Automatic dough batching set 3 head.

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2260-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm

Offer 24149 Specifications: - Cutting range at 90° around 320 mm - flat 300 x 270 mm - Material replenishment stroke up to 500 mm - Unlimited multi-stroke - Remnant length in automatic mode 125 mm - Saw blade dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise -Conveyor - Saw blade cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm

Stainless Steel 2-Way Ball Valve A+R KH530-33-ETE DN80 PN16 Mat. 1.4408 (V4A) DIN3357 flange Ø 200 mm stainless steel ! Dimensions: 310 x 200 x 240 mm

The output of the bagging machines varies from 300 – 400 bags/hour. The year yes 2020 uppersilo and weighing unit all performed in stainless steel Roboter und Palettierer 16kg-25 kg Sack Pneumatically actuated bag holders

Double Ball Valve 3-Way HYDAC KHB-SO1111 PN10BAZ 3235764-0 Pneumatic Actuator, Zero Series < -br />pmax 10 bar DSA-046/180 60000556 used / repaired Prototype 1+4 Dimensions: 180 x 115 x 50 mm

Short-Loader Bar Ø 12-72 mm

Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm ) Width of saw pulley face-optional 5 1/2" (140mm ) Maximum width of saw-standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9,1" ( 2770mm ) Overall width 8,1" ( 2460mm ) Speed of saw pulleys,r.p.m. 8,000( 2440m/min ) Horse-power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42,6m) Shipping Specification : Standard Machine : Nett weight, lbs. 3583 Kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide f ...

Flange ball valve electro-pneumatic SODECO pneumatic actuator ADA 20 double-acting Operating pressure: 8 bar Control voltage: 24 V DN25 PN16 Dimensions: 260 x 200 x 200 mm

I offer various work platforms from the manufacturer CFMG at a special BAUMA trade fair price. terrain scissor lift; Working platform; tracked work platform; lifting platform; Lifting platform with support Type: CFPT0815LDS Load capacity: 450 kg Lifting capacity platform extension: 113 kg Platform dimensions: 2.27 x 1.11 m Extendable platform + 0.90 m Transport dimensions 2.77 m x 1.50 m Height: 2.46 m Railing folded down Height: 1.87 m Weight approx.: 3253 Kg Working height: 10 m Platform height: 8 m Climbing ability up to: 30 % Drive via battery 8x6V / 240 Ah Integrated charger 48V/40 A Support with automatic level compensation. Light Non Marking Chains German instruction manual included 2-year manufacturer's warranty These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in ...

Flange ball valve electro-pneumatic SODECO pneumatic actuator ADA 40 double-acting Operating pressure: 8 bar Control voltage: 24 V PN16 DN40 Dimensions: 310 x 200 x 200 mm

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0405DC Load capacity: 240 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.35 x 0.7 m Extendable platform + 0.60 m Transport dimensions 1.54m x 0.81 m Height: 2.15 m Railing folded down Height: 1.79 m Weight approx.: 990 Kg Working height: 6.5 m Platform height: 4.5 m Climbing ability up to: 25 % Battery-powered 4x12V / 100 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the trade  ...

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2262-242-009 inlet pressure: max. 27 bar outlet pressure: 0 - 7 bar stainless steel ! Dimensions: 120 x 120 x 60 mm

I offer here various working platforms from the manufacturer CFMG at the BAUMA trade fair special price. scissor lift; Working platform; lifting platform; Lifting platform Type: CFPT0608DC Load capacity: 240 kg Lifting capacity platform extension: 100 kg Platform dimensions: 1.37 x 0.7 m Extendable platform + 0.60 m Transport dimensions 1.54m x 0.81 m Height: 2.19 m Railing folded down Height: 1.83 m Weight approx.: 1260 Kg Working height: 7.6 m Platform height: 5.6 m Climbing ability up to: 25 % Powered by battery 4x12V / 115 Ah Integrated charger 24 V/ 15 A German instruction manual included 2-year manufacturer's warranty Light Non Marking Tires These are exhibition machines from the BAUMA in Munich 2025. BAUMA will take place from April 7 to 13 in Munich at the exhibition center. The stages will be available after the tr ...

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2261-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 3.5 bar stainless steel ! Dimensions: 120 x 120 x 60 mm