ba used for sale

2 plies, 4 colours Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm

Festo offers a pressure regulator valve battery with switch-on valve, pressure gauges, silencer, mounting brackets, angled 3/8" push-in fitting outputs and a through-ground, angled 3/8" push-in fitting input. The complete battery is in absolute top condition, it is an unused part of the stock. The following is pre-screwed ready for use: - 528988 Pressure Control Valve Battery LRB-3/8-D-7-0-K4-MIDI - 162809 Switch-on valve HE-3/8-D-MIDI - 4 x 359873 pressure gauge 0-10bar MA-50-10-1/4 - 159593 HFOE-D-MIDI/MAXI mounting bracket - 165004 Silencer UC-1/4 - 4 angled 3/8" push-in fittings on the outputs - Through-ground, angled 3/8" input

PFM SWIFT packaging machine manufactured in 1995, performs the automatic process of packaging various types of products in foil packaging. The reliable and very easy-to-use machine takes the film from a reel above the working area, that is then accurately measured, appropriately cut and cold or hot sealed. At the very end of the process, a special device punches a EUROSLOT hole in the packaging. The packaging machine tooling does not need to be changed when changing the dimensions of the packs. The SWIFT packaging machine weighs 380 kg. Technical data of the PFM SWIFT packaging machine - packing material type: single or multilayer thermo-weldable materials (propylene cellulose film, coextruded film etc.) or PVC - sealing type: elongated profile, spacing 2x 90° - capacity: 60 packs/min - device for making EUROSLOT holes - unloading conveyor - power: 3.2 kW - power supply: 380 V ...

20-09-Edge Banding Machine WOODLAND MACHINERY (new) Price 7300 Eur. + VAT Engine power 0.18 kW Air Pressure 3-6 Bar Voltage 220 V 50 Hz Total Power 1.4 kW Heating Capacity 1.2 kW Edge width 8-50 mm Edge thickness 0.3-3 mm Feed speed 0-26 cm/s Vacuum workpiece Attraction Initial heating of the workpiece by air Edge Milling Transport Dimensions Weight 600 kg

automatic baler Manufacturer: PAAL Type: KONTI 275 C Year of construction 1996 specifications: Press force: 65 t Specific pressing force: 7.88 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 450 - 600 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 45 + 30 kW Throughput: 380 m³/h Pressing capacity: - approx. 13.0 t/h at department store (35 kg/m³ bulk density) - approx. 23.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 35.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 21.0 t Optionally with feeding belt according to photos

H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...

Technical Description:Base Jaws

Battenfeld Calzoni Hydromotor MRE5400/5401/33800 A1640538

- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diame ...

Baguette langroller Benier BE / Guette -Baguette long roller with long roll-out belt -Bandwidth: 72cm -Total length with band 445cm

Z-band, stainless steel frame height 2.80m length 3.20 m

W863 1 horizontal hydraulic bale press LTG, 1988 pressure about 20 t., feeding by 2 shutfeeders, bale dimension approx. 700 x 700 x 1200 mm, bale weight 80 - 120 kg

We offer replacement and wear parts for all common scrap baling presses of German manufacturers, such as Lindemann, Becker & Prünte, Becker, Oberländer, Leimbach.

Shop oven Wiesheu B4-E2 and B8-E2 Type: B4-E2 and B8-E2 2 ovens on top of each other Stainless steel clad digital control 5 lengths 60x40 cm (upper oven) 8 lengths 60x40 cm (lower oven) Mobile on steering wheels Dimensions: Height: 210 cm Width: 95 cm Depth: 90 cm Technical data: upper oven: B4-E2 9.2 kW lower oven: B8-E2 18.4 kW both from 2012 400V - 50 Hz

Key data: 860 , 2

v

Extruder for food products. producer: model: MU A14342 machine performance: 1200 kg/h year: 2017

Demo Machine Specifications:  Dimensions - 1300 x 1560 x 1210 mm, (with built-in drive and control cabinet)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  External dimensions of the mill drum - Ø870 x 1120 mm,  Distance between bearings - 1260 mm,  Height of the drum axis - 860 mm,  Operating capacity - 600 dm3,  Weight of the machine - 641 kg,  Installed power - 5.5 kW,  Input voltage/frequency - 400V/50Hz,  Connector - 32A; 400 V  Milling time range - 1s... 99h59min,  Mill installed on a steel frame,  Drum made of 10 mm steel without inner lining. including first filling 80 mm steel balls Technical specification:  Dimensions - 1300 x 1560 x 1210 mm, (with drive and control cabinet installed)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  Mill drum external dimensions - Ø870 x 1120 mm, � ...

EX Protected Forklift Battery 24V + Charger Explosion-proof battery according to 2014/34/EU II 2G Ex eb IIC T6 Gb II 2D Ex tb IIIC T80°C Db BVS 03 ATEX E 266 X Manufacturer: GNB Industrial Power Model: Marathon Classic Designation: EX 24V 3 EPzS 270 Flex Plus Aqua Type: 3 EPzS 0270 SZC Trough No. 57534134010 Nominal voltage: 24 volts Capacity: 270 Ah Number of cells: 12 Weight: 234 kg Acid volume: 34 liters Delivery date: 24.04.2019 Charger Silent HFX 24V - 55 A Benning E230G24/55B-HFX 24 V 55 A Uses The EPzS series of traction batteries are ideal energy storage systems for industrial trucks, cleaning machines, road vehicles, tractors and other electric vehicles with high energy requirements and high cyclic loads.  Technical features > Robust lead-acid technology with liquid electrolyte > Proven tube plate technology for long service life > Ful ...

Light curtain Photocell Make: Leuze Electronic Type: SD4R30-1050E 4 pairs, 4x receivers, and 4x transmitters Condition: used but fully functional Only to traders is sold. All information without guarantee

with rod pipe

Used fluid packing machine in foil bags made by Unipak, type ASG 3T.

SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE

Spindle circle 165 mm Interface Gildemeister GM 16 AC

Rexroth double pump for Battenfeld injection moulding machine R900737658 SYDFE1-20/100R R900737659 SYDFE1-20/071R

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Offer 24419 Specifications: - Roll diameter 520 mm - Projection 510 mm - Max. passage height 420 mm - Table size 750 x 800 mm - Table left + right swivel 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 4120 - 4200 mm - Saw band width 20 - 25 mm - Stepless cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welder in machine stand -Grindstone - Scissors + air pump -Lighting

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE

Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted

Battenfeld Calzoni Hydromotor MR 4500 L Battenfeld Art.Nr. 21640528

Rexroth double pump for Battenfeld injection moulding machine SY2DFE1-2X/100-100 MNR: R901016480

IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.

Bag width up to 20 cm, Bag length up to 32 cm, machine in production

Machine in running, tail end printer could be added

Hydraulic fish block shredder for frozen fish blocks with cross section 350x100 mm. Design: completely in stainless steel Operating pressure: 140 bar Speed: 50 rpm Oil consumption: 40 l/min. Dimensions: 1002 x 417 x 1148 mm Weight: 150 kg

Kölle Band Saw BSM40 - With belt sanding and welding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

The PEWOPACK 450 is an electronically/pneumatically controlled tightening barrier insulating machine for the production of single and multi-piece containers. It pops up the products in boxes and welds them into a thermal foil. Power max:60 boxes/min Slide type: PE Ptsegq Film width 50 - 450 mm Film thickness 0.025-0.100 mm Roll diameter max. 300 mm

Barrel cleaner, make Scheuer, for inside cleaning of barrels with bavarian tap, with detergent tub, pump, control cabinet

Key data: 255 mm

Special price € 9,200 instead of € 11,040 excl. VAT Thomas Super Trad 301 So Easy - Semi-Automatic Metal Band Saw - The SO EASY saw allows a complete cutting cycle without the constant presence of the operator, thanks to the hydraulic control system for lowering the saw frame - Hydraulic vise - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch to MANUAL cutting mode with button to quickly access the material to be cut - Central control panel at the front of the machine with illuminated alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large round work table "plateau" that rotates with the mitre of the saw blade, guaranteeing excellent support for the material t ...

Schamottsteinboden Pizzaovenen Under-upper heat can be controlled individually Temperature 0 - 450°C adjustable for 4+4 pizza (32 cm) 2 baking chambers each 660 x 660 x 140 mm Stainless steel Connection 400V, 9 kW, 32A-CEE plug Dimensions: 890 x 735 x 595 mm, WxDxH Weight 126 kg Visit our large bakery machinery warehouse!

Batch container 1.500L, heatable, incl. anchor agitator

Key data: 1 mm, 6300 mm

LHS Lagertechnik, supplier of shelving systems and general storage technology. Due to a customer's production closure, we are selling a KASTO HBA 420 band saw. In this ad, you will buy as follows: - 1 piece KASTO band saw HBA 420 - Year of construction: 1990 - Serial number: 17809 - Belt length: 6,300 mm - Band height: 41 mm - Band thickness: 1.3 mm -Conveyor - Connection voltage: 400 volts - Sale in as-is condition without guarantee and warranty - Loading with forklift, shipping and self-collection possible Sale in as-is condition without guarantee and warranty. Loading by forklift, shipping and self-collection possible.

Band saw Saw machine Brand: HESKA Type: ESU-H63 S/N 793322 Infinitely adjustable 16-3200 m/min Hydraulic feed table with approx. 410 mm stroke, to the right approx. 45° and to the left approx. 15° inclined Band length: 4700 mm Operating instructions are available. Sold only to commercial enterprises! All information without guarantee

Moog valve for Battenfeld Mod D691Z4702G Type Q80FTAW4NED2AX

automatic baler Manufacturer: UnoTech Type: UPAMAT 40 H3 Year of Make: 2013 Operating hours: approx. 5,000 specifications: Cutting force: 480 kn at 315 bar Press force: 400 kn at 260 bar Filling opening 1,250 x 920 mm Channel format: 700 x 1,000 mm (H x W) Drive power: 15.0 kW Pump flow rate: 50 Ltr./min. Pump: Double Gear Pump Required oil quantity: 200 Ltr. Oil type: HLP ISO 68 Throughput: - 1.8 t at 20 - 30 kg/m³ bulk density - 3.0 t at 35 - 50 kg/m³ bulk density - 3.5 t at 60 kg/m³ bulk density Bale weight: up to approx. 320 kg Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Control: Siemens S7, IM-151 Dimensions: Width approx. 4,202 mm Length approx. 7,185 mm Height approx. 2,060 mm Machine weight: approx. 7,000 kg Noise emission: approx. 82 - 85 dB ...

Baler Paal Pacomat II with hopper, built in 1979 Specifications: Manufacturer: Paal Type: Pacomat II Year of Make: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Flow rate: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials: paper, cardboard, foil Remarks: The machine is in working condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 ...

Moog valve for Battenfeld Mod D664Z1707E Type L05HXBGENSA0

Moog valve for Battenfeld Mod D664Z4720B Type L05HXBG4NSD2-0

Moog valve for Battenfeld Mod D663Z4714 Type L03HXBU4NSD2-0