ba used for sale

Overhauled battery head 12 ltr in very good condition

screw ø:: 60 mm screw length:: 11D screw speedl:: -- U/min drive power:: 18,5 kW Condition: used, reconditioned Specification: rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 11D - New screw - Cylinder refurbishment - Feed roller refurbishment - New safety cage - New rotary joint for water - New AC motor: 18.5 kW - New control cabinet with Siemens S7-1200 PLC system - New control panel with Siemens KTP700 Basic touch panel - New Siemens G120 frequency converter for variable speed - Remote maintenance device - New cabling - Pressure sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Refurbished in accordance with CE standard safety regulations Warranty: 1 year Option: TCU for temperature control of the water up to 95°C, for placement near the extruder The data for this ad  ...

Battery charger 24V 100A 3.6 KW Year of construction 2000

Year of manufacture: 1989 / 2018 overhauled Single head max nozzle 180 mm PWDS (Feuerherm) Control: Beckhoff Operating hours: since overhaul 2018

Total Bakery Three roll sheeter 2020, stainless, three roll sheeter, mounted on stainless conveyor, roller width 230mm, variable speed rollers and variable speed conveyor, on mobile frame, 3Ph

A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible.

Software: OptiCon Pilot 5.1, with documentation, camera and lighting module, 3x repair work place software for defect visualisation and 4GB RAM computer, was last maintained in 2013.

Key data: 1100 kN, 25 mm

warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

pressure: 35.0 t chamfer lenght: 1250 mm distance between columns: 1095 mm stroke - stepless adjustable: 215 mm column arm: 410 mm table height: 800 mm dayligth: 455 mm working feed: 10.0 mm/sec return speed: 56.0 mm/sec work height max.: ca. 875 mm Control: DM 51 Number of working hours: ~ 13.300 h oil volume: 80.0 l operating pressure: max. 240 bar voltage: 380 V total power requirement: 4.0 kW weight: 2500 kg range L-W-H: 1700 x 1450 x 2250 mm Features: - Robust CNC-controlled hydraulic press brake - With DELEM CNC control unit DM 51” Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Program + tool storage possible Swiveling control panel, front left - CNC electric motor-driven backgauge (X axis) - CNC electric motor-driven height adjustment of the stop (R axis) - 2x manually adjustable stop fingers - 1x split set of deer foot tools - top - 1 ...

Dimensions (L/W/H): 3810x575x1520 mm Weight: 1000 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2650x640x1400 mm Weight: 700 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x780x1500 mm Weight: 800 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1500x1500 mm Weight: 1050 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air consumption: 120 m³/h Pressure power: 10 bar power requirement: 15 kW Packing: ca. 1,20,81,4 m Shipping weight: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Freezer, freezer Used machine year of manufacture not visible Stainless steel cladding, for 60/40 trays Convection cooling Temperature range down to -25°C, with digital display with 2 pairs of support rails mobile 230V connection

The Lutetia Type 3 churn meets the requirements of workshops looking for a higher level of capacity without sacrificing process precision. Thanks to vacuum mixing, marinades penetrate faster and more evenly, improving texture, limiting oxidation and stabilizing yields. This makes the machine ideal for integration into processing lines where regularity, hygiene and speed are paramount on a daily basis. In addition, its useful volume of 2500 L and its capacity of 1400 to 1500 kg make it possible to absorb large batches, while maintaining a homogeneous mixing. Indeed, the geometry of the bowl, combined with vacuum work, promotes the diffusion of brine and reduces cycle times. In addition, the ergonomics of the heights (loading, shaft and under the mouth) facilitate handling, tank feeding and evacuation, which concretely optimizes the flow on the line. In addition, the stainless steel  ...

BA150E Dirty Water Pump – Powerful, Reliable and Quiet, The BA150E is the solution for pumping contaminated water. This 6-inch mobile dirty water pump is designed to handle tough challenges and offers excellent performance combined with user-friendliness and environmental friendliness., Why choose the BA150E?, • Powerful performance: Pump capacity up to 475 m³/hour with a solids passage of up to 80 mm. Perfect for pumping water with large dirt particles., • High efficiency: The high pump efficiency and the adjustable wear plate with cutting grooves ensure low operating costs and a long service life., • Ready for immediate use: Thanks to the innovative MP vacuum system, the pump primes quickly and reliably, even from dry conditions., Technological innovation and sustainability, Centrifugal pump, The semi-open impeller, adjustable wear plate and large inspection covers make mainte ...

Offered are 2 screw compressors with the following features per unit: Power: 15kW, pressure: 10bar, volume flow: 1950l/min (1.95m3/min), speed: 2930rpm, including sound enclosure, 1) year of construction 1989, operating hours: approx. 38100h, 2) year of construction 1986, operating hours: approx. 10600h. Inspection possible by appointment.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 2550 mm throat: 310 mm stroke: 200 mm ajustment speed: 80.0 mm/sec working feed: 10.0 mm/sec return speed: 58.0 mm/sec dayligth: 385 mm table width: 240 mm work height max.: 885 / 1050 mm oil volume: 180 ltr. total power requirement: 15.0 kW weight of the machine ca.: 9850 kg. range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display ...

incl. 20 m roller conveyor, brand Laeisz & Lüders, with new S7 control unit (Teyfel) from the year 2015, Process for Big Bag filling:, - You program the desired setpoint on the big-bag scale., - On the roller conveyor 3.1 empty pallets are placed on and moved over the button, Palette” acknowledged on an external control unit., - The empty pallet is driven onto the scale of the roller conveyor 3.2 and the BigBag scale is tared to zero, - An empty big bag must be hooked into the load hooks and the, Fill nozzle pulled over the puff hose on the fill pipe (external switch S6), Expansion hose., - The Start Big-Bag button starts the filling:, · The filling head moves to the top position, · The filling flap opens and the dosing chute feeds in the coarse/fine flow the, Target quantity in the big bag, · After reaching the fill level, the fill flap closes., · Open the load hooks and deflate  ...

Still working with outdated formwork systems? Time to change that. The used Dokadek 30 panel formwork brings structure to your site and focuses on what matters: quick setup , clear workflows , and safe handling .   Looking for a reliable formwork system for straightforward slab projects ? This is your chance: Buy Dokadek used †functional, robust, and ready to ship. Less lifting 🧱 , less searching 🔍 , less risk ⚠ †more focus on what really counts: moving forward. 🚀   ✅ Why Dokadek 30 (used) is worth it: ✔ Fast setup without beams ✔ Simple, intuitive system layout ✔ Minimal material variety †maximum efficiency ✔ Assembly directly from ground level ✔ Ideal if you’re looking to buy used slab formwork   ⏳ Still thinking? Others have already placed their o ...

- Producer Heesemann - Type MFA 8, Quer/Längs/Längs/Bürste - Year of construction 1998 - 1. Unit - Cross belt - Electronic sanding beam CSD - Fins belt - Belt speed 1. Stufe 0,6-12 m/s - 2. Stufe 24 m/s - Measure sanding belt 4800 x 150 mm - Motor power 11/17 kW - 2. Unit - Length belt - Electronic sanding beam CSD - Fins belt - Belt speed 3,5/10 m/s und 20 m/s - Measure sanding belt 2620 x 1350 mm - Motor power 4,5/12/17 kW - 3. Unit - Length belt - Electronic sanding beam CSD - Distance follower roller 32 mm - Dedusting brush 1 Stk. - Touchscreen with graphic design - Table length extension - Aggregate height adjustment - Electric height adjustment - Feed speed infinitely adjustable 3 - 15 m/min - Vacuum transport belt - Connecting piece 4x180 + 1x146 mm - Air speed main collector 20 m/s - Consumption of compressed air ~ 134,5 + 72,0 m³/h - Length 2.385 mm - Width 2.300 mm  ...

few operating hours laboratory machine - Producer Büftering - Type SWT 325 QH - Year of construction 2015 - 1. Unit - Cross belt - Electronic sanding beam EPS - Fins belt - Sanding belt speed infinitely adjustable - 2. Unit - Length belt - Electronic sanding beam EPS - Sanding belt speed infinitely adjustable - 3. Unit - Brush sanding head Aderlohn 650mm / Messing 650mm - Operating side, left - Electric height adjustment - Feed speed infinitely adjustable - Vacuum transport belt - Air speed main collector 5500 m³/h, 20 m/s - Consumption of compressed air 80 - 108 m³/h - Weight 4.000 kg - Standort, nicht am Lager - Switch cabinet built into the machine - Total connection power 91A / 48 kW - Voltage / HZ 400/50

Yanmar SV60-A excavator, Technical specifications:, - Year of construction: 2020, - Transport weight: 5,560 kg, - Operating weight: 5,635 kg, - Rubber track width: 400 mm, - Digging depth: 3.91 m, - Engine power: 32.6 kW, - Displacement: 1,995 l

- Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %

BBA BA200 Wastewater Pump for Sale, , The BBA BA200 is a reliable, dry-priming wastewater pump suitable for sewer bypass and emergency management. Equipped with a 75 kW Volvo engine at 1800 rpm, this pump offers high capacity and efficiency for professional use., , Technical Specifications:, Capacity: Maximum 700 m³/h at 1800 rpm (580 m³/h at 1480 rpm), with a 105 mm solids passage for contaminated water., , Head: Up to 28 m at 1800 rpm and 18 m at 1480 rpm; Fast suction at high altitudes., , Fuel tank: 300 liters for approximately 15 hours of continuous operation (20 l/h at full load)., , Dimensions and Features, The pump measures 3320 x 1200 x 1880 mm, weighs 3300 kg, and has 8 flange connections (DIN PN10). Made of cast iron with a mechanical seal, it is sound-dampened and easy to operate, maintain, and install. The level control with two floats is equipped for automatic start-stop. ...

BBA BA200 Wastewater Pump for Sale, , The BBA BA200 is a reliable, dry-priming wastewater pump suitable for sewer bypass and emergency management. Equipped with a 75 kW Volvo engine at 1800 rpm, this pump offers high capacity and efficiency for professional use., , Technical Specifications:, Capacity: Maximum 700 m³/h at 1800 rpm (580 m³/h at 1480 rpm), with a 105 mm solids passage for contaminated water., , Head: Up to 28 m at 1800 rpm and 18 m at 1480 rpm; Fast suction at high altitudes., , Fuel tank: 300 liters for approximately 15 hours of continuous operation (20 l/h at full load)., , Dimensions and Features, The pump measures 3320 x 1200 x 1880 mm, weighs 3300 kg, and has 8 flange connections (DIN PN10). Made of cast iron with a mechanical seal, it is sound-dampened and easy to operate, maintain, and install. The level control with two floats is equipped for automatic start-stop. ...

Code: 0471 Brand: BAUSOLA Model: SB/1 - CE Standard Automatic bevelling machine for shutter slats - CE Standard Technical data: Automatic mechanical milling machine to bevel edges with automatic copying device that guarantees perfect 30 ° chamfering or rounding on the perimeter of flat profiles Palette length from mm 130 to 800 Palette width from mm 15 to 100 Palette thickness from mm 6 to 30 Production/hour approx. 1500 pieces Overall dimensions: mm 1500 x 570 x 1370 h Weight kg 135

TECHNICAL DATA: Working area: 3000 x 1300 mm Pressure plungers: 06 Press piston with Ø 70 mm (stroke 260 mm) 02 Reciprocating piston with Ø 40 mm (stroke 270 mm) Stop piston: 04 Piston for closing with Ø 70 mm (stroke 260 mm) 02 Opening piston with Ø 40 mm (stroke 270 mm) Installed power: 22 kW EQUIPPED WITH: Loading bench with pusher Discharge bank Boiler for heating diathermic oil

BANDERA TWIN SCREW PVC PIPES EXTRUDER, for pipes with min/max diam.40/200 mm., extruder with n.2 parallel counter-rotating screws Ø 90 mm, Throghput rate 400 kg/hr, missing of screenchamger (can be added separately), n.2 dies available 40 to 125 mm + 125 to 200 mm., Tooling from 40-200 mm (available diam. 100 mm for O-Ring), Bandera 6 mt.long vacuum calibration tank, IPM haul off unit, IPM saw, IPM belling unit, constructed in 1998, totally refurbished in 2006 by Plasco, machine now disconnected, offered RECONDITIONED., availability: immediate, working width: 40-200 mm Ø, capacity: 400 kg/h, conditions: disconnected, type: pipes extrusion line

Bij het mengen van vloeistoffen spreken we van homogenisatie of blending wanneer twee niet (volledig) gelijke vloeistoffen worden gemengd met als doel een homogeen mengsel te verkrijgen. De moleculen van de ene stof worden dan volledig gelijkmatig verdeeld in de andere stof en concentratie- en temperatuurverschillen worden volledig geëgaliseerd. Bij dit proces is de mengtijd van belang, dat wil zeggen de tijd die nodig is om de concentratie- of temperatuurverschillen tot een bepaald niveau te reduceren.

6 + 6 meter rollenbanen voorzien van handmatige achteraanslag en digitale uitlezing Rollenbanen zijn in hoogte verstelbaar. maximale breedte 500 mm inclusief verbindingsstukken om de rollenbanen aan uw machine te kunnen bevestigen

Laser counting head from Baumer electric, neuwertug Item no. Muller Martini: 0052.6174

Laser counting head from Baumer electric, neuwertug Item no. Muller Martini: 0052.6174

Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm  ...

Bread Crumber Type BG-2/5.5 (identical with HOMMEL-Rotormat Super-2000) - exhibition machine, brand new-condition, year of manufacture: 2025 - with exchangable sieves for crumbing of all kind of bread, production of breadcrumbs, grinding and grating of nuts, cheese or herbs, including 3-, 5-, 8- and 12 mm sieves, capacity up to 800 kg per hour (depending on the product), machine made from stainless steel, electrical supply: 400V/50Hz/3~, power supply: 5.5 kW/7.5 HP

Motors from various manufacturers are available. 1) Bauer DK94V13V/231. 2) Siemens 1LA2778-4AA21. 3) Magnetic VPD6010-002. 4) SEW RF77/A. 5) GK 830-200LW. 6) Bauer DO740-200L. 7) RKF 27/28/2057R. 8) Lenze DERAXX071-32. An on-site inspection is possible.

Krones Variopac FS45 3-lane Formats: 0.2l PET bottle 2x2 shrink in a tray of 4 with foil 4x3 shrink in a tray of 12 with foil 0.33l PET bottle 2x2 shrink in a tray of 4 with foil 4x6 shrink in a tray of 24 with foil 0.5l PET bottle 3x2 shrink in a tray of 6 with foil 6x4 shrink in a tray of 24 with film

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 1400 mm control: Siemens 840D travel -x axis: -80 / +1100 mm travel -z axis: 1060 mm workpiece height max.: 1400 mm max. workpiece weight: 8000 kg Shank diameter: 200 x 240 mm table turning speeds: 2- 400 U/min drive capacity - spindle motor: 44 kW max. torque on the faceplate: 14510 Nm rapid traverse: 12 m/min turning speed range - milling: 0,01 - 7,4 U/min speeds of tool: 4 - 3000 U/min work piece power: 22 kW Torque: 840 Nm total power requirement: 90 kVA weight of the machine ca.: t dimensions of the machine ca.: m equipped with: - CNC control Siemens 840Dsl - C-axis - driven tools - tool changer 12-fold (driven tools) - complete enclosure - chip conveyor - coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Krones Variopac TFS30 3-lane Formats: 0.33l PET bottle 2x2 shrink in a tray of 4 without foil 4x6 shrink in a tray of 24 without film 0.5l PET bottle 3x2 shrink in a tray of 6 without film 6x4 shrink in a tray of 24 without film

Type: Backsaver ST Serial number: 200961-3 Year of construction: 2020 Tipping height: 980 mm Tipping angle: 0 - 90° Working load: max 900 kg Container: 1000 x 1200 x 800 mm Power: 1Ph, 230VAC, 50Hz DImensions: 1450 x 1350 x 1150 mm Weight: 300 kg With rechargable battery and CTEK MXS 7.0 charger

Machine feature: One Loos steam boiler, 13 bar, 10 tons type AW1-1, No. 53658/1 Power: 10 tons of steam at 20 bar, Up to 235 °C, 385 kW Year of construction: 1991 With white head burner for EL heating oil and gas firing, Type: RGL 70/1 A, Category J, Factory number: 3626804 Year of construction: 1991

An unused Technotrans temperature control unit is available. Connected load range: 8kW-9.5kW, heating capacity range: 7.5kW-9kW, cooling capacity: 23kW, circulating medium: water, max. operating temperature: 95°C, max. operating overpressure: 0bar, filling volume: 10l. Documentation available. On-site inspection is possible.

A marking machine for folding cartons including an inkjet printer is available. 1) Off-line feeding and transport system KBA König & Bauer udaFormaxx, min. product dimensions X/Y: 30mm/60mm, max. product dimensions X/Y: 450mm/500mm, min. product grammage: 80g/m², max. product thickness: 8mm, max. transport speed: 90m/min, max. throughput capacity: approx. 250pieces/min. Machine dimensions X/Y/Z: approx. 1300mm/700mm/400mm, weight: approx. 150kg. 2) Continuous inkjet printer KBA alphaJET mondo, print lines: 5, vertical resolution: 32P, character height range: 2mm-15mm, max. printing speed: 780m/min, nozzle diameter: 62µm, machine dimensions X/Y/Z: approx. 500mm/350mm/300mm, weight: approx. 20kg. Including base frame. Documentation available. On-site inspection is possible.

B&A REF: 9170 TON: 50 SCREW DIAMETER: 14MM SHOT WEIGHT: 1 STROKE VOLUME: 1.1CM3 INJECTION PRESSURE: 2500AR PLATEN SIZES: 364 X 196MM MIN MOULD HEIGHT: 100MM MOULD OPENING STROKE: 200MM MAX DAYLIGHT: 300MM EJECTOR STROKE: 50MM CONTROLS: UNILOG B4

Late model Hobart commercial meat saw. Model 6801, serial number 31-1464-941, 200/230volts and 3 phases. Tested. Comes with one 142" blade. Unit has normal wear of used equipment, will require some extra cleaning.

A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible.

SCM edgebander model BASIC 1 : – useful panel thickness from 8 to 40 mm – forward speed 8 mt/min – overall dimensions about 1.7 x 0.7 x h=1.3 m Operating units: – gluing with hot-melt glue tank – loader and shearing for roll material – Trimmer KW 0.6 – Trimming machines KW 0.5+0.5 Machine operating at pick-up in trade-in, with track feed gearbox recently replaced. Not in accordance with CE regulations, but with a safety switch on the cabin opening.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BBA electrically driven 6-inch dirty water pump, suitable for pumping running media., The machine is vacuum-assisted (MP50) and has a soft starter. The machine is explosion-proof and the various components are ATEX-certified., The machine is in stock and ready for immediate use., , Throughput capacity: 370 m3/h, Max dirt passage: 90 mm, Max. head: 15 MWK, Max dirt passage: 1445 rpm, , = More information =, , Year of manufacture: 2007, Empty weight: 1.160 kg, Connector size: 6 inch, Quick coupler system: Yes, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a  ...